Total 5,812 software test engineer job vacancies in Engineering category

Responsibilities:

• To perform engineer’s role on method statement, implement cost & time efficiency on operation
• To checking plans, drawings and quantities for accuracy of calculations
• To supervise site works compliances and inspection requirement
• To carry out daily site supervision, coordination and quality assurance of all trades implementation on site
• To work closely with sub-contractors on project progress and ensure timely work arrangements
• To scheduling materials and equipment purchases and deliveries
• To liaise with consultant and carry out site inspection
• Attend all site's meeting on work progression
• To prepare monthly meeting progression report

Requirements:

• Possess Degree in Civil Engineering
• 3 years working experience in Construction
• Able to work independently
• Have positive attitude

The Senior Solutions Engineer is the technical anchor of the Solutions Engineering team, combining deep hands-on expertise with a leadership mandate. You provide mentorship and guidance to Solutions Engineers, help standardize solution delivery practices, and serve as the decision-making authority for technical matters when the Engineering Manager is unavailable. You operate with a high degree of autonomy while remaining aligned with engineering leadership on strategic priorities.

Key Responsibilities

• Team Guidance & Mentorship: Coach and support Solutions Engineers on complex customer engagements, technical approaches, and professional development
• Delegated Decision-Making: Exercise independent judgment on technical decisions, customer escalations, and prioritization in the absence of the Engineering Manager, within agreed scope and boundaries
• Solution Architecture: Lead and review solution designs for high-complexity or high-impact customer engagements, setting the technical bar for the team
• Standards & Playbooks: Define and maintain solution engineering standards, reusable templates, and best practice documentation for the broader team
• Escalation Handling: Act as the primary escalation point for Solutions Engineers facing technical blockers or ambiguous customer requirements
• Cross-Functional Liaison: Represent the Solutions Engineering team in cross-functional discussions with Product, Customer Success, and Field CTO/SMEs when the Engineering Manager is unavailable
• Quality Review: Review and approve solution proposals, PoC outcomes, and technical specifications produced by Solutions Engineers
• Onboarding: Lead the technical onboarding of new Solutions Engineers, ensuring ramp-up on tools, processes, and customer environments
• Feedback Loop: Consolidate field insights from the team and surface patterns, gaps, and improvement opportunities to the Engineering Manager and Product

Required Qualifications

• 4-8 years of solution engineering, systems engineering, or technical consulting experience
• Excellent communication and presentation skills
• Ability to translate complex technical concepts for non-technical audiences
• Experience with enterprise customer environments
• Project management and organizational skills
• Bachelor's degree in Computer Science, Engineering, or related field (or equivalent experience)

Preferred Qualifications

• Cloud platform certifications (AWS, Azure, GCP)
• Experience with enterprise architecture and design patterns
• Familiarity with agile methodologies
• Track record of successful customer implementations
• Experience with technical sales or pre-sales engineering Understanding of customer business models and industry challenges

Competencies

• Technical expertise and continuous learning
• Customer empathy and business acumen
• Communication and presentation skills
• Problem-solving and analytical thinking
• Collaboration and teamwork
• Attention to detail and

Responsibilities

• Responsible for daily operational equipment issues and strategize recovery actions to support production requirement.
• Perform equipment buy-off and qualification for machine installation, modification, upgrade and maintenance.
• Involve in WLCSP process (Taping & Detaping, Wafer Mount, Backgrinding, Laser Grooving, Laser Mark, Dicing, AOI, Die Sort etc)
• Monitor and analyse equipment performance and reliability.

Requirements

• Diploma / Higher NITEC / NITEC in Electronic / Electrical / Mechanical / Mechatronics Engineering or equivalent.
• Tape and Reel experience in wafer level and knowledge on vision system is preferred.
• Possess strong analysis and good teamwork.
• Good communication and interpersonal skills.
• Able to work 12-hr day or night shift.

Our client is a well-established MNC specializing in precision manufacturing and engineering solutions, supporting customers across various industries globally. They are looking for a Mold Process Engineer (SPD Tester) to join their Engineering team. They are located in the (West) – easily accessible.

Responsibilities for Mold Process Engineer (SPD Tester):

• Provide engineering support for injection moulding, assembly, packaging, and manufacturing operations.
• Troubleshoot process, tooling, and equipment issues to improve production efficiency and minimise downtime.
• Analyse process variances and implement corrective actions to improve yield and process stability.
• Support process development, optimisation, and validation activities for new and existing products.
• Execute validation activities including Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ).
• Conduct Design of Experiments (DOE), process studies, and technical evaluations to enhance process capability.
• Prepare and maintain Standard Operating Procedures (SOPs), validation reports, and technical documentation.
• Perform Process Failure Mode and Effects Analysis (pFMEA) and support continuous improvement initiatives.
• Work closely with Production, Quality Assurance (QA), Maintenance, and Engineering teams to ensure smooth manufacturing operations.
• Ensure manufacturing activities comply with ISO 9001, ISO 13485, and ISO 14001 standards.

Requirements:

• Diploma or Degree in Mechanical Engineering or related discipline.
• Minimum 3–5 years of relevant working experience in plastic injection moulding environment.
• Knowledge of validation protocols including IQ, OQ, and PQ.
• Familiar with Scientific Process Development (SPD) methodologies.
• Experience in DOE, process optimisation, and troubleshooting will be advantageous.
• Exposure to ISO 9001 and ISO 13485 environments will be an added advantage.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/CV.
We regret that only shortlisted candidates will be notified.

Email Address: jobs@recruitpedia.sg
EA License No: 19C9682
EA Personnel No: R22104769
EA Personnel Name: Ong Boon Kiet (Travys)

Job Descriptions

• As an Equipment Owner able to evaluates, selects, and make justification for equipment that is most appropriate and cost effective for the manufacture of company products.
• Oversees the installation, modification, upgrade, and maintenance of manufacturing equipment.
• Liaise with vendors to resolve equipment issues and manage/drive vendors' performance to meet/exceed equipment KPI, MTTR, MTBF and goals.
• Establishes projects and solutions for increasing uptime, throughput, cost saving and resolve equipment problems that affect the manufacturing process.
• Ability to review Process SPC data, setup equipment FDC and machine control and Improve alarm reduction
• Provides technical support to the manufacturing equipment repair and process engineering organizations.
• Defines and writes preventative maintenance procedures and schedules.
• Conduct training to shift members (PM operator, Technician & Engineers).
• Able to coach shift engineer in performing hardware trouble shooting, generate troubleshoot lesson learnt material and equipment OCAP for sharing with Team

Job Requirements

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• 2 or more years of semiconductor equipment or process engineering experience in Wafer bonder and Sam coat machines.
• Consistent track record to solve problems & address root causes for tools
• Perform Normal/ Swing Shift ( or 12-hour rotating shift if required)
• Good interpersonal skills and is an excellent team player
• Good verbal and written communication skills
• Logical thinking capability and good analytical skill

Electronic Hardware Design Engineer.

Duties and Responsibilities

· Develop electronic hardware from the ground up, while working closely with system designer.

· Create schematic and a thorough QC process

· Hardware safety/reliability analysis and quality assurance.

· Able to work with PCB designer, PCBA assembly plants for prototype fabrication and BOM management.

· Write tests for both existing and new electronic hardware compatibility and stability

Hardware design Engineer Requirements and Qualifications

· Bachelor’s degree in electronic engineering, information technology, computer science, or a related field

· Experience in schematic development for embedded system, analog / RF / Digital / FPGA.

· Experience of Altium designer or other schematic / PCB design tool.

· Experience on TI, Xilinx electronic components and selection / assessment tools.

· In-depth understanding of network communication.

· Working knowledge of TI ARM / Xilinx SoC IDE.

Job Title - MRO Engineers

Location - Ang Mo Kio

Type - 1 year contract, renewable

Description -

Will be a part of the Maintenance, Repairs, Overhauls (MRO) – Engineering team to ensure the smooth functioning of our engineering, quality and reliability processes supporting Ground Support Equipment (GSE) maintenance operations at the customer’s premises. Will play a key role in maintaining operational reliability, troubleshooting issues, engaging the customer in technical/engineering issues, and implementing process improvements to enhance efficiency and performance.

Troubleshoot, analyze, and resolve technical issues utilizing practical fault tree analysis methodologies to minimize GSE downtime.

Conduct failure mode analysis and recommend enhance maintenance scheme to improve GSE reliability.

Communicate with the customers on troubleshooting, failure mode and corrective/preventive actions on technical defects.

Prepare technical report and presentation deck for submission and presenting to the customer when required.

Develop, review, and update technical documentation including maintenance manuals, repair procedures, and engineering change requests.

Perform spare parts obsolescence management which include identifying obsolete spare parts and mitigating risk through monitoring, alternative parts identification and build safety stocks.

Collaborate closely with operations, quality assurance, and supply chain teams to optimize maintenance schedule planning.

Respond to urgent technical issues, emergencies during off-office hours and weekends when necessary.

Ensure compliance with safety, security, and regulatory standards.

What we are looking for:
• Bachelor in Electrical/Computer/Computer Science Engineering.
• Minimal 5 years of experience in embedded firmware/software product development. Prior experience in industrial automation will be an advantage.
• Proficiency in C programming for embedded systems; C++ experience is required.
• Practical experience with STM32 or similar 32-bit MCU architectures, including low-level driver development.
• Experience with development in the following areas for embedded system:
o Development with RTOS, such as VxWorks, Quadros, ThreadX or others.
o Development of communication protocols like TCP/IP, Ethernet/USB/WIFI and CAN/Profibus.
• Good analysis skills and proven ability to solve complex problems. Experience in using different hardware-assisted debugging tools (eg: oscilloscope, logic analyzer etc.)
• Good communication and interpersonal skills and be able to work independently and as team in multi-cultural environment
• Open-minded, a willingness to experiment within acceptable boundaries and a creative mind to bring novel solutions into design and problem-solving

The Preferred - You Might Also Have:
• Have experience implementing firmware in digital and analogue hardware-oriented design based on chip/component specification, hardware design and schematics.
• Experience documenting firmware/embedded software design, hardware/firmware interface. Have knowledge in different established design techniques and design patterns.
• Have experience leading process improvements to improve organization capabilities with results based on embedded software development modern practices and tools.
• We prefer knowledge of industrial automation, control systems, or PLCs.

Responsibilities:

• Perform daily SAP operations.
• Formulate reasonable production plans based on market sales forecasts to meet customer demand with the most economical inventory.
• Optimize production plans, regularly analyze plan execution status, and drive improvements in plan execution rate to ensure delivery performance.
• Improve production efficiency (OEE).
• Manage and plan the procurement of operation-related production materials.
• Handle logistics for wafers, production-related materials, parts, and finished goods.
• Develop production material plans to ensure the timely completion of production tasks and the rationality of material inventory levels.
• Any other ad-hoc tasks as assigned. 

Requirements:

• Minimum Bachelor in a Science or Engineering field.
• Experience in logistics planning / supply chain management (experience in 6/8-inch FAB or similar environment is preferred).
• Strong communication skills to communicate effectively with stakeholders
• Proficient in Windows operating systems and Office software.
• Skilled in using material management systems such as SAP & ERP.
• Proficient in SQL and Python.
• Fresh graduates are welcome to apply

Responsibilities

• Responsible for troubleshooting, calibration, repair and maintenance of assigned testers and probers platform.
• Ensure equipment are in production condition with minimum downtime and running at yield specified.
• Responsible to perform prober preventive maintenance and calibration.

Requirements

• Diploma / NITEC in Electronic / Electrical / Mechanical or any Engineering field.
• Prior experience in semiconductor or manufacturing environment is advantageous.
• Possesses strong analytical, problem-solving and communication skills.
• Able to commit to 12-hr day shift.
• Entry level candidates welcome to apply.

Job Description

• Responsible for integration and implementation of both hardware and software engineering work
• Carry out proper planning, execution and supervision of the integration work and do QA technical checks throughout the project execution
• Handle application programme change management, hardware deployment management and documentation
• Implementation of PLC/SCADA project from concept to design and programming
• Interface with SCADA and PLC programming
• Meeting with clients, doing reports and documentation
• Perform troubleshoot independently

Requirements

• Min Nitec in Mechatronics, Electrical or Electronics
• Possess a Singapore Class 3 or 3A Driving License
• knowledge in PLC and SCADA

To submit your application, please apply online apply@rn-care.com or call +(65) 6514 9838 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

We are seeking a highly skilled Senior Process Integration Engineer to lead the development and optimization of Indium Phosphide (InP) based Edge Emitting Lasers (EELs). In this role, you will be the bridge between design and manufacturing, ensuring that our high-performance optoelectronic devices transition from concept to high-volume production with world-class reliability and yield.

You’ll be working at the frontier of photonics, handling complex material systems and sophisticated fabrication sequences to power the next generation of optical communications and sensing technologies.

Core Responsibilities

• Process Flow Ownership: Design, implement, and manage the full end-to-end fabrication flow for InP-based EELs (e.g., Fabry-Pérot, DFB, and DBR lasers).
• Yield & Performance Optimization: Identify and resolve integration bottlenecks. Use Statistical Process Control (SPC) and Design of Experiments (DOE) to improve device electro-optical performance (threshold current, wall-plug efficiency, and slope efficiency).
• Cross-Functional Collaboration: Partner with Epitaxy (MOCVD) teams to optimize regrowth interfaces and with the Design team to ensure Layout-to-Mask integrity.
• Advanced Fabrication Management: Oversee critical steps including dry/wet etching (ICP/RIE), dielectric deposition (PECVD/ALD), metallization etc.
• Failure Analysis: Coordinate Root Cause Analysis (RCA) on fabrication failures using SEM, TEM, and FIB diagnostics to drive continuous improvement.

Key Technical Requirements

• Materials Expertise: Deep understanding of III-V compound semiconductors, specifically the GaAs/InP/InGaAsP/material systems.
• Device Physics: Strong grasp of semiconductor laser physics
• Fabrication Proficiency: Hands-on experience or good understanding on photolithography, etching, thin film
• Characterization:  Understanding laser characterization data and correlating results back to specific process modules.

Qualifications

• Education: PhD or Master’s degree in Electrical Engineering, Physics, Materials Science, or a related field.
• Experience: 5+ years of direct experience in III-V semiconductor processing
• Software: Proficiency in JMP, or Python for data analysis;
• Mindset: A methodical troubleshooter who thrives in a cleanroom environment and enjoys the "detective work" of process integration.

Description

We are seeking an AI Engineer with strong hands-on experience in Microsoft Azure AI services to design, develop, and deploy AI-powered solutions. The role focuses on leveraging Azure-native AI capabilities, data services, and machine learning tools to build scalable and production-ready intelligent systems.

Key Responsibilities

Design and implement AI solutions using Azure AI services

Build and deploy machine learning / AI models on Azure cloud

Develop APIs and services to integrate AI capabilities into enterprise applications

Work with structured and unstructured data for model training and inference

Collaborate with business and technical teams to define AI requirements

Deploy, monitor, and optimize AI solutions in Azure environments

Ensure performance, scalability, and reliability of AI systems

Support troubleshooting and enhancement of existing AI solutions

Required Skills & Experience

Hands-on experience with Microsoft Azure AI / Azure Machine Learning

Strong understanding of AI/ML concepts and model lifecycle

Experience deploying and consuming models via APIs

Strong programming skills in Python / Java / similar languages

Experience working with data pipelines and data processing

Knowledge of REST API integration and system design

Good to Have

Experience with Azure services (App Service, Functions, AKS, Data Factory)

Familiarity with ML frameworks (Scikit-learn, TensorFlow, PyTorch)

Exposure to MLOps practices (CI/CD for ML models)

Experience with cloud monitoring and logging tools

Understanding of model evaluation and performance tuning

Soft Skills

Strong analytical and problem-solving skills

Good communication and collaboration abilities

Ability to work in Agile teams

Eagerness to learn and adapt to new cloud AI technologies

• Well Established Security Inspection Solutions Company

• Salary: $2500 - $2800 (Basic) + $300 Transport Allowance

• Working Hour: Monday - Friday (8.30am – 5.30pm)

• Company Location: Jurong East (Based on Project Site)

• Variable bonus + Excellent Wellfare

• Training Provided

Job Scope:

• Assist Engineers in the maintenance, repair, and installation of equipment. Diagnose errors and technical issues and determine appropriate solutions.
• Support Engineers in project management, including planning, execution, and monitoring.
• Assist with the installation of new equipment and systems.
• Conduct routine troubleshooting of mechanical and electrical equipment to ensure smooth operations.
• Produce timely and detailed reports regarding maintenance activities, project status, and any issues or delays.
• Follow all company field processes and protocols to ensure safety and efficiency.
• Perform basic housekeeping duties to ensure a clean and safe work environment.
• Perform any other engineering-related tasks as assigned by senior engineers or management.

Requirement:

• Diploma in Electrical / Mechanical Engineering or equivalent
• 0 - 2 years of relevant working experience in similar position

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

YEOW CHANG FU (R23118759)

EA Recruitment Pte Ltd

EA License No: 21C0492

Key Responsibilities

• Evaluate machinery and equipment specifications to ensure they meet technical requirements; interpret classification rules and respond to review comments.

• Familiar with equipment specifications and installation requirements for main engines, generators, propulsion systems, gearboxes, hydraulic equipment, HVAC, refrigeration, and related systems.

• Knowledgeable in marine piping systems including bilge, ballast, tank gauging, cooling, fuel oil, sanitary, fire protection, and others. Capable of selecting appropriate pump types, compressors, pipe materials, thicknesses, valves, and fittings that meet pressure ratings and functional needs.

• Coordinate with designers and vendors to develop pipe schematic diagrams, machinery space equipment layouts, and equipment installation plans.

• Review mechanical interfaces for major equipment such as main engines, gearboxes, and propeller shafting.

• Collaborate with a team of engineers to develop detailed 3D ship models for production, including interfacing and clash checks on pipe routing, HVAC, electrical installations, and other systems; generate material take-offs (MTO) for pipe routing, fittings, and pipe spools.

Requirements

• Bachelor's degree or Diploma in Marine Engineering.

• Minimum 5 years of relevant experience in a shipyard environment.

• Proficiency in AutoCAD.

• Good overall computer skills.

• Solid understanding of shipbuilding and project processes; ability to comprehend technical specifications and engage in project discussions with clients.

• Strong analytical, communication, and interpersonal skills.

• Willing to travel to Batam or other countries for technical meetings as required.