Total 4,943 design engineer job vacancies in Engineering category

Project/ Tender Support

• Prepare and assist senior engineers in developing project plans, schedules, and documentation during project or tender phase, demonstrating understanding of project management methodologies.
• Prepare and maintain project documentation, including daily progress reports, site diaries, and as-built drawings.
• Coordinate with contractors, subcontractors, and vendors as needed.
  Support site inspections and quality control checks.

Technical Assistance

• Understand client’s requirement and prepare engineering calculations and drawings under the guidance of senior engineers.
• Prepare and assist in the selection and specification of equipment and materials.\
• Research and analyse technical data.

Quality Assurance

• Conduct site inspections and quality control checks to ensure project compliance.
  
• Prepare and implement method of statement and processes for quality assurance.
  
• Coordinate and carry out testing and commissioning activities to ensure systems are operational and meet performance requirements.
• Prepare operational and maintenance manuals and as-built drawing for project handover.

Learning & Development

• Actively seek opportunities to learn and develop technical skills.
• Participate in training programs and workshops.
• Contribute to a positive and collaborative team environment.

Requirements:

• Bachelor's degree in Mechanical Engineering.
• Minimum 2 years of relevant experience in the construction industry.
• Basic understanding of MEP systems and design principles.
• Proficiency in MS Office Suite, and CAD software (e.g., AutoCAD).
• Strong attention to detail and organizational skills.
• Willingness to learn and adapt to new technologies and industry trends

A senior position may be offered depending on the candidate’s experience.

1. Design and coordinate (M&E) building services to meet project standards.
2. Consult with regulatory authorities to obtain necessary approvals ensure full compliance with statutory and project requirements.
3. Prepare detailed tender drawings and cost estimation.
4. Review shop drawings and technical specifications.
5. Monitor project progress and ensure smooth implementation of project.
6. Attend / conduct project meeting, site supervision and inspection carried out to the systems by contractors.
7. Management contract administration.
8. Coordinate and attend site inspections with clients upon project completion.

As a Staff Equipment Engineer specializing in sputter media, you will be responsible for overseeing the operation, maintenance, and continuous improvement of sputtering equipment used in the production of hard disk media. You will work closely with cross-functional teams to ensure optimal equipment performance, minimize downtime, cycle time improvement and contribute to the development of new processes and technologies.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Oversee day-to-day equipment maintenance activities, troubleshooting, and line issue management to ensure high equipment availability and minimal production downtime.
• Lead equipment reliability, maintenance, and engineering improvement initiatives to support stable and efficient manufacturing operations.
• Drive preventive and predictive maintenance strategies to improve equipment reliability, reduce failures, and sustain long-term operational performance.
• Lead equipment upgrades, machine conversions, and technology improvements to support next-generation HDD product requirements.
• Manage new equipment installation, commissioning, and acceptance testing to ensure systems meet operational, safety, and process specifications before production release.
• Monitor and analyze equipment performance, reliability, and OEE data to identify improvement opportunities and drive operational excellence.
• Lead root cause analysis for equipment failures, implementing effective corrective and preventive actions to prevent recurrence.
• Collaborate with Process Engineering and Sputter Yield teams to improve yield performance, reduce defects, and enhance process capability.
• Coordinate closely with Production, Quality, Facilities, and other cross-functional teams to ensure smooth production operations and achieve manufacturing targets.
• Manage engineering projects related to equipment upgrades, modifications, and system improvements, ensuring timely execution within scope and budget.
• Provide technical leadership, guidance, and mentorship to junior engineers and technicians to strengthen team capability and technical competency.
• Develop and maintain engineering documentation, including SOPs, maintenance procedures, and best practices for equipment operation and sustainment.
• Ensure all equipment and related systems comply with safety regulations, company policies, and industry standards.
• Support continuous improvement initiatives by introducing new technologies, automation solutions, and engineering best practices.
• Strengthen knowledge sharing and technical skill development within the engineering team to build a high-performing equipment engineering organization.
• Maintain strong collaboration with OEM suppliers and technical partners to support equipment upgrades, troubleshooting, and technology development.
• Perform other duties and responsibilities as assigned by management.

As a Senior Equipment Engineer specializing in sputter media, you will be responsible for leading equipment sustaining, reliability, and continuous improvement activities to support high-volume hard disk media manufacturing. You will play a key role in driving equipment performance, improving operational efficiency, and supporting new technology implementation. This role requires strong technical leadership to guide technicians in maintaining stable manufacturing operations, reducing equipment downtime, and enabling next-generation product and process requirements.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Lead day-to-day equipment sustaining activities, including troubleshooting, failure analysis, and resolution of equipment-related production issues.
• Drive equipment reliability improvement initiatives to enhance equipment uptime, reduce chronic failures, and improve overall operational stability.
• Develop, implement, and optimize preventive and predictive maintenance strategies to improve long-term equipment performance.
• Lead root cause analysis (RCA) for major equipment failures and implement effective corrective and preventive actions.
• Support equipment upgrades, hardware modifications, and machine conversion activities to meet product and technology roadmap requirements.
• Coordinate new equipment installation, commissioning, qualification, and acceptance to ensure systems meet operational and safety standards.
• Monitor and analyze equipment performance indicators such as OEE, MTBF, MTTR, and downtime trends to identify improvement opportunities.
• Collaborate closely with Process Engineering, Yield Engineering, Production, and Quality teams to improve process capability and manufacturing performance.
• Drive engineering projects related to equipment improvements, automation enhancement, and productivity optimization.
• Develop and maintain equipment documentation including SOPs, maintenance procedures, troubleshooting guides, and best practices.
• Work closely with OEM vendors and suppliers to resolve technical issues, implement upgrades, and support equipment technology development.
• Support cost reduction initiatives through engineering optimization, reliability improvements, and maintenance efficiency.
• Ensure all equipment operations comply with company safety policies, regulatory requirements, and industry standards.
• Participate in continuous improvement initiatives, including Lean manufacturing, automation deployment, and digitalization programs.
• Perform other duties and responsibilities as assigned by management.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Perform failure analysis, root cause investigation, and fault isolation on SSD products during NPI, qualification, and mass production phases using test logs, diagnostic tools, and hardware analysis techniques. 

• Debug hardware and manufacturing-related failures by analyzing tester logs, power rails, NAND, DRAM, controller behavior, and interface issues to drive corrective and preventive actions. 

• Collaborate with cross-functional teams including Product Engineering, Process Engineering, Quality, Manufacturing, and Suppliers to resolve yield, process, and test related issues. 

• Develop and maintain debug procedures, cookbooks, troubleshooting guides, debugging tools, and knowledge databases to improve diagnostic accuracy, turnaround time (TAT), and operational efficiency. 

• Generate technical reports and present failure findings, corrective actions, and yield improvement recommendations to management and stakeholders while supporting continuous improvement initiatives. 

As a Senior Equipment Engineer specializing in sputter media, you will be responsible for leading equipment sustaining, reliability, and continuous improvement activities to support high-volume hard disk media manufacturing. You will play a key role in driving equipment performance, improving operational efficiency, and supporting new technology implementation. This role requires strong technical leadership to guide technicians in maintaining stable manufacturing operations, reducing equipment downtime, and enabling next-generation product and process requirements.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Lead day-to-day equipment sustaining activities, including troubleshooting, failure analysis, and resolution of equipment-related production issues.
• Drive equipment reliability improvement initiatives to enhance equipment uptime, reduce chronic failures, and improve overall operational stability.
• Develop, implement, and optimize preventive and predictive maintenance strategies to improve long-term equipment performance.
• Lead root cause analysis (RCA) for major equipment failures and implement effective corrective and preventive actions.
• Support equipment upgrades, hardware modifications, and machine conversion activities to meet product and technology roadmap requirements.
• Coordinate new equipment installation, commissioning, qualification, and acceptance to ensure systems meet operational and safety standards.
• Monitor and analyze equipment performance indicators such as OEE, MTBF, MTTR, and downtime trends to identify improvement opportunities.
• Collaborate closely with Process Engineering, Yield Engineering, Production, and Quality teams to improve process capability and manufacturing performance.
• Drive engineering projects related to equipment improvements, automation enhancement, and productivity optimization.
• Develop and maintain equipment documentation including SOPs, maintenance procedures, troubleshooting guides, and best practices.
• Work closely with OEM vendors and suppliers to resolve technical issues, implement upgrades, and support equipment technology development.
• Support cost reduction initiatives through engineering optimization, reliability improvements, and maintenance efficiency.
• Ensure all equipment operations comply with company safety policies, regulatory requirements, and industry standards.
• Participate in continuous improvement initiatives, including Lean manufacturing, automation deployment, and digitalization programs.
• Perform other duties and responsibilities as assigned by management.

Job Description:

• Analyse SPC chart. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyse split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on pass down to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Manufacturing can have more flexibility.
• Perform process matching between equipment to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self-audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide feedback/ training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics /Microelectronics / Chemical Process Engineering / Chemistry / Physics related major
• Min 2 years working experience in Diffusion (implant, Furnace and WET/Clean Tech) Process.
• Good interpersonal skills and is an excellent team player
• Logical thinking capability and good analytical skill
• Highly level of integrity with good ownership and accountability
• Passion for the semiconductor / manufacturing industry

Job Description & Requirements

You will be responsible to provide an excellent and consistent level of service to your customers. The Technician is responsible to assist in the smooth and efficient running of the Engineering Department in support of all other operating departments.

Qualification in Electrical/Mechanical Engineering and/or Building Management/Facilities Management

Minimum 2 years work experience as Technician/Tradesman in a hotel or a similar large building/complex with central plant

Must have knowledge and hands-on skills in, Electrical, Plumbing, HVAC, and Painting.

4 off days monthly, rest days depend on schedule. able to work long hours and late in evenings and weekends

Competitive salary 3k and above

Positive and nurturing working environment

Work location: islandwide

If you have an interest in applying for this role, please WhatsApp me at 98198786 to apply. Only shortlisted candidates will be notified. Priority will be given to Singaporeans

Young hon Lim/ manager

Render private limited

EA licence no 15c7827

EA reg no R1550906

Requirements:

• Degree/Diploma in Computer Science, Information Technology, Electronics Engineering, or related field
• 6+ years of experience in DevSecOps, DevOps, or related roles
• Proficiency in at least three scripting/programming languages (e.g., Bash, PowerShell, Python, Go)
• Strong experience with Git and modern branching strategies
• Hands-on experience with public cloud platforms (AWS, Azure, or Google Cloud)
• Expertise in infrastructure automation tools (Ansible, Terraform, Puppet, Vagrant)
• Experience with virtualization technologies (VMware, KVM, Hyper-V)
• Strong knowledge of containerization (Docker, Kubernetes)
• Experience building and managing CI/CD pipelines (GitLab, Jenkins, Bitbucket, ArgoCD)

Roles & Responsibilities

We are looking for someone who has Building and Construction, Steel and Structural, and Safety Knowledge, or the construction site knowledge professional firm.

Job Descriptions:

· Monitor and Handle quality, Budget, Quality, Product Knowledge, and arrangement for site delivery and site - matter.

· Handle and Instructions employees on machine operation, safety, and company policies.

· Inspect Inputs/outputs to check for QC/materials., PO from established quality standards.

· Coordinator workflow, processes, and machineries.

· Research or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines.

· Monitor team and work procedures to meet production schedules

· Provide direction for project tasks and hold all team members accountable for safety, quality, and production

· Conduct daily briefings with workers to review site goals and performance feedback

Qualifications and Requirements:

· Minimum of 2 years++ experience as a site engineer in construction and Steel of Structural, or having related safety certificate, etc.

· In-depth knowledge of extrusion procedures, equipment, and WSH guidelines.

· Able to read and understand the AutoCAD or 3D drawings.

· Problem-solving abilities and Responsivity and Mature

· Trueful and Honesty

· Observant and alias the project, dateline, and follow instructions by the production Supervisors, and follow closely and with the administration work.

1. Have experience in lightning protection system and earthing system (LPS&ESS) in Singapore, familiar with the electrical technical standards, LPS&ESS regulations and requirements in Singapore.

2. Participate in relevant technical meetings of consultants, Main contractors, and the owner.

3. Be responsible for the cable work of part of equipment.

4. Mainly be responsible for the LPS&ESS work on site.

5. Be responsible for the progress and quality control of the LPS&ESS site work; ensure compliance with the drawings and the requirements of Singapore, be responsible for the testing and site inspection on site, prepare and submit inspection forms.

6. Cooperate with LEW to prepare BCA acceptance documents, Cooperate in the relevant inspection and handover work.

Job Description

· Plan, organize, supervise and liaise closely with operation team and sub-contractors on all lifting activities.

· Overall in-charge for preparing lifting and erection plan for all the Gantry Cranes.

· Prepare, develop and review Lifting plans, Method Statement, Risk Assessment and Safe Work Procedure of all subcontractor for any lifting activities.

· Conduct routine checks and inspections on work site to ensure compliance with authorities and client’s requirements.

· Daily walk about around assign areas of site and make a note of compliance and non-compliance to HSE operating procedure.

· Able to prepare and review lifting plan and coordinate site lifting supervisors, riggers and signalman, and being the focal point for all site lifting operations Perform discipline checks of the procedures and analysis. Read project specifications and provide feedback from an engineering perspective. Liaise with clients, and subcontractors

Job Requirements:

Minimum five (5) years of engineering experience with Degree in Civil Engineering recognized by the PE Board or qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer or Recognized Degree in the relevant field subject to the acceptance of the Engineer, and at least three (3) years of experience in the construction supervision of building project.

The Lifting Engineer shall manage all heavy lifting of construction materials, including ensuring concreting works are safely carried out In compliance with the Rapid Transit System Regulations, and no lifting works shall pose safety risks to operating railway at all times.

Must have a Lifting Engineer certificate from The Institute of Engineers Singapore, 5-Day Course for Appointed Person - Lifting Operations

World No.1 player in industry is hiring Associate Engineers

Company Introduction

Angel Group owns the world’s largest share for the manufacture of casino playing cards and related equipment. Angel has 70 years of history; started from Japan and now has offices in USA, Singapore, Australia, Macau, Philippines, Mexico and France with a total of over 500 employees in the world. We are the first company in the Jurong Innovative District and this four-storey building is our next regional Headquarters, with an R&D Centre and factory.

Job Description

• Execute production as per production schedule and meet targeted output as set by management.
• Perform initial level of troubleshooting of equipment-related problems to minimise downtime.
• Interact with staff support to ensure smooth and optimum level of machine operational efficiency.
• Establish effective preventive maintenance.
• To control the quality of outputs using advanced technologies.
• To control the flow of various goods and materials through digital quantity monitoring system.
• Mange multiple priorities.
• Other related tasks.

Requirements

• No experience required (Fresh Graduates welcome)
• Any relevant Diploma in Engineering

Other information

• Location : West
• Company coach available from Jurong East MRT
• Working Hrs : 8:30AM – 5:30PM Off on Sat & Sun
• Lunch and uniform including safety gear are provided.

Job Descriptions:

• Assist the Project Engineer and Project Manager in project planning and to co-ordinate and oversee all works on the site.

• Monitor & co-ordinate the works with supervisors.

• Handling of technical and engineering problems.

• Assist in planning, programming and monitoring of construction works progress.

• Liaison with client's representative, relevant authorities and consultants.

• Identify and assess any foreseeable risk arising from the workplace or work processes, minimise environmental impact associated with the construction activities.

• Take reasonable practical measures to eliminate any foreseeable risk to any person who is at the workplace.

• Ensure safe work procedures and environmental control measures are implemented at the work site.

Job Requirements:

• Degree in Civil / Structural Engineering or its equivalent.

• Preferably Degree be recognized by Board of Engineers.

• Minimum 3 yrs experience in Residential Construction Industry/ HDB project experience is an advantage.

Job Responsibilities:

• Responsible for Full-chip Physical Verification Sign-off in area of (DRC, LVS, ANT, ERC, ESD, PERC) for tape-out.
• Co-work with Place & Route team to resolve full-chip layout integration issues.
• Coordinates with internal IP owners on IP related issues.
• Coordinates with Manufacturing Team on DRC related issues.
• Provide automation solutions to improve efficiency in tape-out flow.
• Report on tapeout PV issues.

Requirements:

• Bachelor/master’s degree in electrical/Electronic Engineering/Computer Science
• Familiar with IC Design front-to-backend flow
• Preferably well-versed in Calibre, ICV, Assura, Star-RCXT
• Proficient in script programming, such as Python, TCL, Perl, or C-shell
• Proficient in UNIX (Linux) platforms
• Strong communication skills, problem solving and analytical skills.
• Experience with 3D IC design (e.g., CoWoS, SoIC, EMIB) is a plus.

Location: One North, Singapore