The Mechanical Engineer shall be responsible to perform engineering analytics, provide engineering solutions and perform defect investigations to support equipment refurbishment & maintenance projects. The candidate shall be required to independently conduct defect troubleshooting, failure analysis, engineering analysis and develop engineering solutions to the problems identified. The candidate shall also collaborate with other internal and external stakeholders on engineering and maintenance efforts and ensure high equipment reliability and availability.

Responsibilities

• Lead in the identification and consolidation of engineering standards for the respective mechanical/electrical and electronics/hydraulic and structural systems/thermal systems.
• Develop work instructions, test parameters, test jigs and test benches to enhance equipment repair and overhaul capabilities.
• Lead in the conduct of engineering analytics for equipment failure and trending of defect data to seek engineering insights and identify areas for reliability and safety improvements.
• Lead in the development of in-house capabilities to support the evolution from preventive to predictive maintenance.
• Lead in the development of engineering solutions, propose relevant modifications and work with Ops and Maintenance team to implement and validate safety and effectiveness of the solutions.
• Identify / develop / evaluate alternate parts, out-of-manual repair and modifications to support obsolescence management.
• Lead in the conduct of defect investigation to identify root cause and follow-up, including developing of fault tree analysis, FEMCA and conduct of forensic investigation.
• Perform review of project design specifications to support refurbishment & maintenance projects to ensure adequate safety, reliability, maintainability and operability considerations.
• Any other tasks assigned by supervisor.

Qualifications & Work Experience

• Diploma or Degree in Mechanical / Electrical & Electronic Engineering/Mechatronics Engineering or equivalent from a recognized institution.
• Preferably with at least 2 years’ working experience in automotive, aerospace or heavy equipment environment.
• Fresh graduates from local universities are welcome to apply.

Skills

• Comfortable to work hands-on in a maintenance workshops environment alongside other Engineers, Assistant Engineers and Technical Officers.
• Adept with diagnostics and reliability engineering methods such as FMECA, Fault Tree analysis etc.
• Possess basic understanding of hydraulic/electrical/mechanical systems for vehicular platforms.
• Able to read and understand technical/ electrical drawings.
• Equipped with Solidworks Software skills for 3D Modelling and Drafting.
• Possess knowledge in Finite Element Analysis (FEA) an advantage.
• Good interpersonal and communication skills.
• Able to present ideas, approach, and objectives clearly.
• Strong analytical and decision-making abilities.
• Able to work independently and as a team effectively adjusting oneself flexibly to different work situations.
• Effective organizational and planning skills.

About the Role:

• Oversee design, installation, and commissioning of electrical systems (lighting, power distribution, ELV systems) for residential, commercial, or mixed-use developments.

• Manage electrical works across project lifecycle—from tendering and contractor coordination to site supervision and handover.

• Plan and oversee preventive and corrective maintenance of building electrical systems to ensure safety, reliability, and compliance.

• Ensure all electrical installations meet regulatory standards (e.g., local codes, safety regulations) and conduct periodic inspections/audits.

• Liaise with contractors, consultants, property managers, and authorities for electrical works, upgrades, and issue resolution.

About You:

• Diploma or Degree in Electrical Engineering or related field.

• 8–10 years of hands-on experience in electrical projects and maintenance, preferably within real estate, property management, or construction environments.

Why join Cushman & Wakefield?

As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from;

• Being part of a growing global company;

• Career development and a promote from within culture;

• An organisation committed to Diversity and Inclusion

We're committed to providing work-life balance for our people in an inclusive, rewarding environment.

We achieve this by providing a flexible and agile work environment by focusing on technology and autonomy to help our people achieve their career ambitions. We focus on career progression and foster a promotion from within culture, leveraging global opportunities to ensure we retain our top talent. We encourage continuous learning and development opportunities to develop personal, professional and technical capabilities, and we reward with a comprehensive employee benefits program.

We have a vision of the future, where people simply belong.

That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, gender, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status. We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us.

Responsibilities

• Provide on-site technical support during construction and commissioning activities
• Identify, troubleshoot, and resolve technical issues in coordination with engineering teams and stakeholders
• Ensure all site issues, queries, and solutions are properly documented, tracked, and closed
• Support equipment installation, plant configuration, and LV secondary systems including cabling activities
• Monitor daily site progress and coordinate closely with contractors, partners, and internal teams
• Act as the interface between site teams and engineering offices, ensuring timely communication and resolution
• Participate in technical meetings and support the Site Manager in discussions with stakeholders
• Ensure proper implementation of change management, site queries, redlines, and documentation processes
• Maintain accurate as-built documentation and ensure all teams use the latest approved drawings
• Analyze technical issues, assess impacts on schedule/cost, and propose practical solutions
• Capture lessons learned and contribute to continuous improvement across projects
• Ensure compliance with environmental, health, and safety (EHS) requirements and promote safe work practices

Requirements

• Degree in Electrical Engineering or a related discipline
• Experience in HVDC, substations, or large-scale AC power or infrastructure projects
• Prior experience supporting construction and commissioning in a site-based role
• Strong understanding of electrical drawings (SLD, layouts, cable lists, connection diagrams, etc.)
• Knowledge of equipment installation, cabling systems, and construction sequences
• Familiar with engineering processes such as change management and site documentation workflows
• Proficient in Microsoft Office applications (Excel, Word)
• Strong analytical and problem-solving skills
• Good communication and stakeholder management skills
• Ability to work effectively in a multicultural, fast-paced site environment
• Organized, detail-oriented, and able to work both independently and as part of a team
• Strong commitment to safety, quality, and compliance standards

We regret that only shortlisted candidates will be notified.

Brunel International S.E.A Pte. Ltd.

UEN No: 199603098R

EA License No: 16S8067

Shahidan Yusof - R1658969

Brief Summary:

As a Quotation Engineer within our Product Management team, you'll spearhead the seamless generation of quotations for optical components. Collaborating closely with our engineering department, you'll take charge of sourcing sub-component parts from third-party vendors, ensuring precise and consistent quotes for our sales teams.

Job Description:

• Receive and process RFQ requests from the sales team, entering them into our system and tracking progress using designated trackers.

• Create comprehensive RFQ worksheets, including detailed drawings and specifications, and distribute them to relevant engineering personnel for assessment.

• Coordinate with the engineering, planning, purchasing and quality team to gather inputs on material cost, process cycle times, yields, tooling and manufacturing feasibility. Ensuring RFQs are accurate and complete before submission back to the sales team.

• Conduct thorough analysis and review of high-value quotes with the management team, providing insights and recommendations as necessary.

• Build and maintain strong working relationships with the sales team through effective communication, timely quotation support, and close coordination to meet customer requirements and business objectives.

• Maintain and enhance quotation databases, costing models, Power BI dashboards, and KPI tracking reports.

• Support automation, digitalisation, and data structure improvement initiatives to improve quotation efficiency and data accuracy.

• Ensure compliance with company policies, quality standards, and documentation requirements.

• Participate in cost reduction, productivity improvement, and process optimization initiatives.

• Undertake any other duties as assigned by the management team to support the overall goals and objectives of the Product Management department.

Qualifications:

• Minimum Diploma in Engineering or related discipline.

Required Skills & Abilities:

•  5 years of experience in a manufacturing environment or 2 years of experience in quotations.

• Strong communication, interpersonal, and organizational skills.

• Proficiency in MS Office required

• Experience with business intelligence tools (e.g. Power BI and SAP) and knowledge in optics is advantageous.
  

  Interested candidates may also send your resume to hr@edmundoptics.com.sg

Job Description

• Reports Project Manager
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.

Job Requirement

• Degree in Civil Engineering or equivalent (Recognized degree by PE board or BCA)
• RE Registration with IES of Singapore
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage

Job Overview

The world will become more and more intelligent and automated in the future. Are you interested in automation?

UMC will expand production capacity and will build the first 22-nanometer production line in 'Garden City' Singapore. You'll have the opportunity to use your passion and expertise in semiconductors to turn your ideas into world-changing products.

We are looking for automation engineers to join our newly expanded fab in Singapore. You will have the opportunity to lead new technology transfer, new line setup, maintenance, quality and productivity improvements to ensure production runs smoothly.

Responsibilities

• Manage AMHS (Automatic Material Handling system), Sorter and FOUP performance metric
• Lead in AMHS daily operation, maintenance & troubleshooting and vendor liaison
• Create new function or tune system to optimize EQ/system performance
• Interact with various groups such as IT, manufacturing, EQ/Process owner and vendors to minimize downtime and maximize throughput.
• Initiate project management on cost, quality, scope and schedule to ensure timely delivery

Qualifications

• Possess at least a Bachelor in related Engineering (Electrical engineering /mechanical engineering / mechatronics / computer management)
• Possess good communication skills in working as a team
• Is self-demanding and committed to innovative solutions to complete task
• Able to think critically with strong problem solving skills
• Possess prior experience in basic IT infrastructure setup / maintenance / troubleshooting / (mainly windows based IPCs) will be an advantage
• Candidates with relevant AMHS hardware commissioning and maintenance experience may be considered for a senior position

Job Description:

• In charge of designing the PCB layout of electronic circuit boards and generate Gerber files for PCB fabrication.
• Responsible in research and define efficient and reliable architecture to fulfil electronic circuit board requirements for the company drone systems.
• In charge of firmware programming in embedded C/C++ language.
• In charge of testing PCB assemblies thoroughly and ensure they operate as expected.
• Responsible in sourcing suitable electronic components to implement the design architecture.
• In charge of studying datasheets of the electronic components and design the schematic of electronic circuit boards that can fulfil the requirements.
• Responsible in generateing documents and drawings of design and test.

Job Requirement:

• Minimum Degree in Mechanical/ Electrical/ Aerospace/ Mechatronics Engineering or relevant
• Minimum 3 years of working experience in electronic hardware and firmware design
• Experience in analog and digital circuit design with experience in designing electronic circuits with microcontrollers, digital signal processors (DSP), field programmable gate arrays (FPGAs), etc
• Proficient in schematic and PCB design tools such as Altium Designer, OrCAD Capture and PCB Designer, Autodesk EAGLE, etc and using instruments such as multimeters, oscilloscopes, logic analysers, etc. to troubleshoot issues on electronic circuit boards.
• Proficient in C/C++ programming language.
• Knowledge in various communication buses and protocols such as UART, I2C, SPI, CAN, Ethernet, etc.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of Implementing and maintaining the Quality Management System standards and Environment, Health and Safety SOPs and Manuals.
• Responsible in ensuring adherence to Compliance and Regulatory Oversight for Standard Operating Procedure, Quality and Safety Manuals, Maintenance Organisation Expositions.
• In charge of Certification Audits by Civil Aviation and liaising with assigned CAA Principal Maintenance Inspector for approvals, certifications and inspections.
• Responsible in conducting Internal Quality Audit, External vendor QMS audits as well as managing vendor qualification into the Approved Vendor List
• Take charge of assigned audit conducted by Customer.
• In-Charge of the Quality and Safety of assigned workshop
• Responsible for conducting investigations for incidents and accidents, warranty
• Responsible assisting the Manager in developing, reviewing, improving and implementing quality and safety management procedures
• Attend meetings and other duties as delegated by the Quality Manager

Requirements:

• Min Diploma in aerospace engineering/engineering
• Min 3 years of in QMS in Aerospace Industry.
• Qualified Auditor is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

The QA/QC Engineer is responsible for ensuring that all construction andstructural works are carried out in accordance with project specifications,approved drawings, quality standards, and regulatory requirements. The roleinvolves implementing quality control procedures, conducting inspections,managing documentation, and ensuring compliance with company Quality ManagementSystems (QMS).

1. Develop, implement, and maintain Quality Assurance (QA) and

Quality Control (QC) procedures for construction projects.

2. Ensure all construction activities comply with project specifications,

approved drawings, contract requirements, and applicable standards. 3.Prepare and manage Inspection and Test Plans (ITP), Method

Statements, Quality Plans, and related QA/QC documentation.

4. Conduct regular site inspections and quality audits to verify

workmanship and material compliance.

5. Coordinate inspections with clients, consultants, main contractors,

and relevant authorities.

6. Monitor and verify incoming materials to ensure compliance with

approved specifications and standards.

7. Prepare, submit, and maintain quality records, inspection reports,

test reports, checklists, and NCR (Non-Conformance Reports).

8. Investigate quality issues, identify root causes, and recommend

corrective and preventive actions.

9. Follow up on rectification works and verify closure of quality-related

issues.
10. Coordinate with project teams, site supervisors, engineers, and

subcontractors to ensure quality requirements are met.

11. Monitor subcontractors' performance and ensure compliance with

quality standards and project requirements.

12. Attend project meetings and provide updates on quality matters.

13. Support project handover activities and preparation of quality

dossiers and as-built documentation.

14. Perform other duties assigned by the Project Manager or QA/QC

Manager.

Responsibility

• Assists day-to-day operation by picking up the phone calls/email/walk-ins/ticketing system to understand user’s enquires/request, provide IT support and perform troubleshooting or escalate to the relevant PIC, or provide alternatives to resolves the cases.
• Ad-hoc duties such as software installation, clone laptops, inventory checks, disposal etc.
• Perform troubleshooting in systems and report the status to superior on time without delay .
• To support project from another team/section/department as instructed by superior .
• To perform any ad-hoc assignment as instructed by superior .

Requirements

• Diploma or Higher Nitec studied in IT or related fields
• Preferable with at least 1-2 years of relevant working experience
• Responsible, meticulous, fast learner and able to understand the internal system process quickly
• Able to follow the internal systems thoroughly to make sure the tasks are smoothly process

Interested applicants, please Email , and look for

Jensen Fang Lifa

jensenfang@recruitexpress.com.sg

Recruit Express Pte Ltd

EA License No. 99C4599

EA Personnel Registration Number: R2197080

We regret that only shortlisted candidates will be contacted.

Job Descripton

• Review Process Flow Diagrams (PFDs), Piping and Instrumentation Diagrams (P&IDs), electrical schematics, and functional design specifications (FDS).

• Develop comprehensive, project-specific T&C procedures, Method Statements, Commissioning Risk Assessments.

• Conduct pre-commissioning walkthroughs and Punch-List generation to identify construction or installation defects prior towet testing.

• Lead field testing activities, including loopchecks, instrument calibration verification, pump alignment/rotation checks,and valve operational tests.

• Oversee the initial loading of process media,resin beds (cation/anion/mixed beds), RO membranes, etc.

• Collaborate with PLC/automation engineers to perform input/output (I/O) verification, interlock testing, and functional sequence tuning.

• Start up and optimize the different water treatment system like DI, UPW, WWTP, Recycling plant, chemical dosing systemetc.

• Monitor, measure, and record critical process parameters such as flow rates, trans-membrane pressures (TMP), differential pressures, pH, conductivity, and TOC, etc.

• Troubleshoot process upsets, hydraulic bottlenecks, or equipment failures during the startup phase.

• Compile complete commissioning data books, including signed-off test sheets, calibration certificates, and rawwater/product water quality analytical reports.

• Conduct hands-on technical training sessions for the client’s operations and maintenance (O&M) teams.

Job Requirements:

• Degree in Chemical/ Environmental/ Mechanical Engineering related discipline.

• Minimum 3 years’ relevant experience inmanaging quality

• Candidates with senior experiences willbe considered for a senior role.

1. To assist Director in monitoring and controlling of level of professional standard of work carried out by the project teams.

2. To carry out Complex Structures design and submissions to the authorities.

3. To carry out analyses using Finite Element Analysis software and trouble-shoot any error found.

4. To perform Value Engineering onstructural schemes and solutions.

5. To assist Directors with the preparation of presentation slides.

6. To review problems arising during the course of each project and to initiate non-conformance preventive and corrective actions.

7. To report to the Director/Associate on all matters regarding design and technical issues.

8. To develop and monitor Project from conception to completion.

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Technician/Assistant Engineer
• Working Location: West (Nearest MRT: Joo Koon)
• Working Hours: 5 days (Mon to Fri: 8.30 am to 6.18 pm)
• Salary Package: Basic + OT Pay + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Operate and monitor equipment for surface treatment (e.g. UV-ozone or plasma), screen printing of conductive and dielectric inks, thermal curing, enzyme dispensing, and pattern cutting (e.g. laser or die cut).
• Maintain production records and documentation.
• Perform basic checks on product quality during production.
• Help improve processes and support pilot production runs.
• Carry out other tasks as directed by supervisors.

APPLY NOW!!!

• ITE – Higher Nitec or equivalent.
• Experience in printed electronics, screen printing, micro dispensing, or biosensor/flexible circuit manufacturing is a plus.
• Good attention to detail and troubleshooting skills.
• Able to work OT on Saturdays if required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #78155 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description

• Industry/ Organization Type: Engineering Services
• Position Title: Mechanical Engineer (ACMV)
• Working Location: Kallang
• Working Hours: 5 days (Mon – Fri: 8.45am – 5.45pm)
• Salary Package: Basic $3,800 – $4,500 + AWS + VB
• Duration: Permanent

Key Responsibilities

• Coordinate and supervise ACMV installation works on-site.
• Review engineering drawings, specifications, and technical submissions.
• Liaise with consultants, subcontractors, suppliers, and project teams.
• Monitor site progress, work quality, and material deliveries.
• Prepare material requisitions and project documents.
• Attend site meetings and help resolve technical issues.
• Support testing, commissioning, and handover activities.
• Ensure work follows safety, quality, and project requirements.

APPLY NOW!!!

• Degree in Mechanical Engineering or a related discipline.
• Relevant ACMV or construction industry experience will be an advantage.
• Able to read engineering drawings and technical specifications.
• Proficient in Microsoft Office applications.
• Good communication and coordination skills.
• Willing to learn and take on assigned responsibilities.
• Able to work at the Tuas project site when required. Transportation is provided from the designated MRT station to the site office.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #10100 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131