Junior Radio Frequency Design Engineer

About Doodle Labs

Doodle Labs is the global leader in high-performance private wireless systems. We build cutting-edge mesh networks for robotics, drones, and the Industrial Internet of Things. Doodle Labs has experienced rapid growth over the past five years as our radio systems have been adopted by Fortune 500 companies (e.g. Airbus, General Electric) and industry-leading innovators (e.g. Boston Dynamics, FLIR).

Your Opportunity

Doodle Labs develops market-leading broadband mesh radios. Products include handheld mesh hotspots (Wearable Smart Radio) and tiny embedded multi-band radios for robots (Helix). Your opportunity is to build novel RF products while implementing Doodle Labs’ patented RF techniques. You will design and develop next generation wireless communication systems utilizing Wi-Fi 4/5/6/6E chipsets and protocols.

Job Description

· Perform detailed radio frequency translation plans and architectures

· Evaluate gain, noise parameters (NF, SNR), dynamic range, linearity, and power consumption analyses to execute a predictable, robust design

· Collaborate with CAD engineers and drive PCB implementation of the design with emphasis on clean power supply design, interconnect design for required EMI and RF transmission performance

· Participate in design reviews and prepare design documentations at every stage of development until the final prototype test and characterization

· Perform parametric evaluation of transceivers, like Pout, IMD/IP3, EVM, noise parameters with spectrum analyser, modulation analyser and perform wireless link level functional evaluation to complete the product characterization

· Collaborate with product engineers for various certification procedures and NPI, followed by the Transfer of Technology (ToT) for large quantity production

Job Requirements

· Bachelor’s, Master’s, or PhD in Electronics Communication Engineering or Digital Communication Engineering

· Minimum 4 year of experience as a RF system hardware with proven track record of meeting industry delivery standards in the relevant areas

· Good interpersonal and creative skills with the ability to multitask in a demanding and fast paced environment

· Hands-on experience in the design and integration of RF, Analog, and Mix signal blocks such as PA, LNA, mixer, frequency synthesizer, filter, coupler, detector, microcontroller, etc., supplemented with knowledge of specification derivation from system level requirements

· Experience working with basic CAD tools and competence in evaluation flow and operation of appropriate test equipment to evaluate product performance

· Experience in script writing such as Bash, python etc., will be a plus as it is used in test automation

Looking for individuals who are passionate and enthusiastic about learning and designing next-generation radios!

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

The Senior Design Engineer is responsible for structural analysis and design compliance are met for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the work place.

Value Add of Position

• Design and calculation report for reinforced concrete, steel and geotechnical works using British Standards and Eurocode.

Technical Competencies

• Technical expertise and knowledge in Foundation, Structural and Civil works.

Qualifications and Education Requirements

• Minimum Degree in Civil Engineering from accredited Universities
• Prior 6 years of experience in design and construction (structural). Preferably have done data centre, marine offshore, and mixed-development projects.
• Have completed at least 1 project (data centre, commercial bldg., industrial)
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software
• Well versed in Autocad and BIM software is preferred

Mechanical Design Engineer - Precision Engineering

• Office Location: Kaki Bukit Singapore
• Working Hours: Mon – Fri 8am – 5.30pm
• Monthly Salary: Basic + AWS + Variable Bonus (VB)
• Employment Type: Full time, Permanent Contract

Company Overview
A well‑established precision engineering group with decades of experience in the industry. The company specializes in designing and manufacturing high‑precision parts and tools that support advanced manufacturing processes, including semiconductor assembly, testing, and wafer fabrication. With a strong reputation for quality and innovation, it serves global customers across multiple high‑tech sectors.

Responsibility

• Design and develop semiconductor components, tooling, and related parts to deliver robust and compliant solutions.
• Create and review detailed 2D/3D CAD models, drawings, specifications, and schematics to meet performance, quality, cost, and schedule requirements.
• Support prototyping, testing, and validation activities; analyze results and implement design improvements.
• Participate in project planning, execution, and cross‑functional coordination, ensuring alignment with engineering and production teams.
• Contribute to design reviews, quality assurance processes, and provide technical support for existing products and production issues.
• Maintain accurate design documentation, test reports, and project records while driving continuous improvement and innovation in engineering practices.

Requirement

• Minimum Degree in Mechanical or related Engineering which are recognized by relevant authority
• Minimum 2 years of experience in designing molds, precision parts, and tooling for the semiconductor industry
• Familiar with SolidWorks, AutoCAD or equivalent
• Knowledge of precision component and tooling design for semiconductor applications
• Candidate who can start immediately or within short notice will be preferred

We regret to inform you that only shortlisted applicants will be notified.
Recruit Lync Pte Ltd | EA License Number: 22C1000
Chen Hoe Nam | EA Personnel License: R25158678

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Company Overview

MSE Consultants Pte Ltd, established in 1983, specializes in civil and structural engineering for diverse projects including flyovers, housing, hospitals, and commercial buildings. The firm partners with global experts to deliver excellent engineering consultation and management.

Job Summary

We are seeking a Design Engineer to design Good Class Bungalow (GCB) projects.

Responsibilities

• Lead civil and structural design for Good Class Bungalow and landed residential projects to fulfill client specifications and regulatory requirements
• Prepare detailed engineering calculations, technical drawings, and submissions to secure project approvals from authorities
• Utilize AutoCAD and relevant design software to produce accurate design documentation and plans
• Ensure all designs comply with Singapore’s building codes and regulations
• Manage project tasks independently, demonstrating accountability and proactive problem-solving
• Apply IT skills to support design and documentation workflows effectively
• Demonstrate commitment to delivering high-quality residential designs that meet client expectations

Preferred competencies and qualifications

• Experience working on bungalow or Good Class Bungalow projects, contributing to design and delivery excellence

The Senior Design Engineer is responsible for assisting the Senior/Technical Manager on structural analysis and design compliance are met for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis.
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications, and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers, and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required.
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the workplace.

Skills & Requirements

• Education: Minimum Degree in Civil Engineering from accredited Universities
• Experience: Prior 6 to 8 years of experience in design and construction
• At least 5 years of civil MRT station experience (have completed at least 1 MRT station project)
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software.
• Well versed in Autocad and BIM software is preferred.
• Technical Competencies: Technical expertise and knowledge in Foundation, Structural and Civil works (MRT Stations).

JOB DESCRIPTION

In this position, the individual thoroughly understands digital design specs of various IP blocks and SoC architecture definition

• Develop detailed module level and SoC level testplans for all the functional features, based on the design spec.

• Develop ASIC verification environment including all the respective components such as stimulus, checkers, assertions, monitors and scoreboards.

• Develop directed and constrain-random verification functional tests and simulate using EDA tools to verify functional spec is working

• Execute verification plans, including design bring-up, DV bring-up, regression enabling for all the features.

• Collaborate with digital design team to debug functional testcases and deliver functionally correct designs

The ideal individual must have proven ability to achieve results in a fast moving, dynamic environment

JOB REQUIREMENTS

· BSEE or MSEE, entry level

· Strong communication, analytical and documentation skills and ability to interface with other groups

· Strong VLSI functional verification experience, preferably with exposure to complex, high speed custom VLSI products

· Strong hardware functional verification language and Object-oriental language development skill. Prefer with SystemVerilog/ UVM experience

· Familiar with ASIC verification methodology, tools, and development flow

· Working experience or familiar with Ethernet L2/L3 switch/router, SOC, AMBA bus, high-speed IO (USB-2/3, PCIe gen2/3, SATA), Flash controller, or CPU peripherals

KEY RESPONSIBILITIES:

• Contribute to IP selection and architecture definition; create functional specifications.
• Perform PPA evaluation and optimization.Develop RTL for functional blocks/units with architectural features and timing constraints, targeting synthesis and APR.
• Support debugging across RTL simulation, gate-level, and post-layout simulations.
• Conduct quality checks using FE EDA tools such as Spyglass.lint, CDC, RDC, etc.
• Take ownership of the full project lifecycle, from architecture to production.

PREFERRED EXPERIENCE:

• > 10 years of hands-on experience in digital frontend design.
• Strong proficiency in Verilog/VHDL.
• Hands-on experience with logic FE tools (e.g., VCS, Verdi, Spyglass, DC).
• Experience in Static Timing Analysis is a strong plus.
• Prefer candidates with experience implementing advanced-process chips.
• Familiarity with low-power design and power simulation preferred.
• Proficiency in TCL, Perl, or similar scripting languages is a plus.
• Prior experience with multiple tape-outs and chip bring-up is preferred.
• Leadership or management experience is an advantage.

ACADEMIC CREDENTIALS:

• Bachelor or Masters Degree in Electronic Engineering, with years relevant work experience.

~ 5 days work week, Monday - Friday 9am - 6pm

~ Location: Suntec

~ No experience is welcome to apply! On the job training is provided

~ 6 months contract and convertible to permanent based on performance

Our client is a solar energy solution provider in Singapore

Responsibilities:

• Responsible for operational level understanding of the requirement of the client/customer, Site Visits, Site feasibility & Solar Systems Design and complete execution. Able to check site feasibility and provide the best suitable option for enhancing suitability.
• Designing of arrangements of the solar panels for Rooftop & Ground Mounted PV system including layouts, Single line diagram (SLD), schematic diagrams, calculation of sizing and BOQ of material. Highly experienced with Autocad.
• Drawing/Document submission/approvals, scheduling, Factory inspections, proving the guaranteed prepared a generalized check list for review of all standard. End to end execution of solar projects (Rooftop & Ground Mounted) and Service Support.
• Familiar with PV simulation software such as PVsyst and Helioscope.
• In addition to the above-mentioned duties and responsibilities, any other assignments given occasionally or daily by the immediate reporting officer

Requirements:

• Possesses minimum Degree in Electrical Engineering/Renewable energy-related field
• Minimum 1.5 year of experience in handling solar projects preferred
• No experience is welcome to apply! On the job training is provided
• Has knowledge in electrical design concepts

HOW TO APPLY:
Interested applicants, please click on “Apply Now” or email to ref32@stafflink.com.sg to submit your resume.
We regret only shortlisted candidates will be notified.

Stafflink Services Pte Ltd
EA Licence No.: 04C4294
EA Personnel: Jason Bong Wee Kiat
EA Personnel Reg. No.: R23116067

C&S Design Engineer (Junior/Senior Positions Available)

• A1 main contractor with well established in-house design team
• Permanent full time role with good career progression
• Large scale buildings / infrastructure projects

Job Responsibilities:

• Provide technical guidance in the design, review, and coordination of civil and structural components for construction projects.
• Coordination with authorities for updates and submission of project design
• Liaise closely with internal and external parties as well as the authorities to resolve design discrepancies and construction issues ensuring full compliance with design and project requirements.
• Collaborate closely with project teams to ensure all structural designs meet required specifications, regulations, and quality standards.
• Prepare and deliver engineering calculations, reports, drawings, and technical documentation for project designs.
• Contribute to value engineering efforts to develop efficient, cost-effective, and practical design solutions.

Requirements:

• PE Board recognized Degree in Civil or Structural Engineering
• At least 3 - 5 years of working experience in design work/design coordination for large scale building/infrastructure projects
• Good knowledge of local authorities’ requirement
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software

For more information, please apply with a word format CV to josephchua@ennobletalents.com and we can have a confidential discussion on this opportunity.

We regret that only short-listed candidates will be notified.

Registration No. R1551062

EA Licence No. 25S3022

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Responsibilities:

• Responsible for ship electrical design activities and able to process basic design information to expand the function design into detail and production information for the marine vessel. He/she shall perform engineering of electrical and navigation equipment to the related platform equipment, as well to interface Electrical equipment with Ship Management System (SMS). The scope includes  :

• • Main Power generation and distribution system network and architecture
  • Integrated electric propulsion systems, Power management systems
  • Engineering integration between ship equipment / Ship Monitoring system with Electrical power generation
  • Electrical fittings, equipment and panel arrangement
  • Preparation of equipment connection diagram and cable schedules
  • Preparation of Electrical design calculation

• Responsible for vessel electrical system design in accordance with Marine Classification and regulatory, as well as IMO/Solas
• Review vendors technical proposal to ensure solution meets the functional requirement
• Responsible for ensuring the Contractual technical requirement and Marine Classification requirement of Electrical related design are fulfilled and within project schedule.
• Liaise with client and other internal engineering trades for project coordination.
• Attend technical review and meetings with client and vendors during project execution to ensure requirement are fulfilled, technical solutions are discussed and technical issues resolved.

Knowledge & Skills:

• Knowledge of Marine Electrical and Automation systems
• Knowledge in Autocad, Naviswork, ETAP and CADCAM 3D software will have advantage
• Good Interpersonal Skills, problem solving skills and is a team player.
• Good time management and able to meet tight deadlines.

Requirements:

• Degree in Electrical, Automation, Mechatronic or any related engineering field
• Only Singapore Citizen will be considered for this role

Other Information:
 

• Location: 16 Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Position Overview

CT Singapore is seeking enthusiastic and detail-oriented individuals to join our growing team as Video Technicians or Engineers. These role supports both on-site event production and in-house equipment maintenance and logistics.

Whether you're an entry-level technician passionate about starting a career in the live events industry or a seasoned Video engineer with strong hands-on technical experience, this role offers a dynamic and rewarding work environment.

You’ll be part of an energetic team delivering high-profile live events and conferences across the region, working closely with Project Managers and Senior Engineers to ensure high-quality execution. Candidates must be team players with a proactive attitude, willing to work flexible hours and travel as required.

Key Responsibilities

On-Site (Event) Duties

• Setup, operate, and dismantle technical equipment for events:

-Video Technician/Engineer: Projectors, LED screens, Media Server and more

• Provide real-time technical support and troubleshooting during live shows.

• Work closely with event coordinators, project managers, and clients to deliver technical solutions.

• Load/unload and transport technical equipment to/from venues safely and efficiently.

• Ensure equipment and systems are functioning optimally before, during, and after events.

• Provide on-site technical support and quick troubleshooting where necessary.

Warehouse / Base Operations

• Prepare technical equipment according to event requirements.

• Conduct quality control (QC), routine maintenance, and functional testing of equipment.

• Label and organize equipment for easy identification and fast turnaround.

• Document and report faulty or damaged equipment to the management and warehouse team.

• Manage inbound and outbound shipments, sub-rented items, and create shipping manifests.

• Maintain a clean, safe, and organized warehouse working environment.

Team Support & Growth

• Participate in hands-on training and learn from senior engineers.

• Collaborate cross-functionally with other departments.

• Contribute to continuous improvements in processes, equipment maintenance, and safety standards.

Requirements

For Entry-Level Technicians:

• Basic knowledge of video systems.

• Willingness to learn and grow in the live event industry.

• Basic computer skills and familiarity with MS Office.

• Able to work flexible hours, including nights, weekends, and holidays.

• Must be able to lift equipment and perform hands-on tasks.

For Experienced Technicians / Engineers:

• Strong technical knowledge of Video systems and live event workflows.

• Experience operating:

-Video Technician/Engineer: LED walls, Media Servers, etc

• Proven ability to handle maintenance, QC, and preparation of technical equipment.

• Previous experience managing technical equipment setups on-site with minimal supervision.

• Familiarity with equipment databases or forklift certification is a plus.

Additional Information

• This is a full-time position based in Singapore.

• Willingness to work extended hours and travel across APAC

• Candidates with a valid forklift license, Class 3/4 driving license, or prior event production experience will have an advantage.

• Career progression opportunities are available from Junior Technician to Senior Engineer and beyond.

Desirable Traits

• Strong communication skills and a team-first mindset.

• Passion for delivering flawless live event experiences.

• $3,500 basic + bonus + AWS

• 5 days work week

• Career Growth in the Construction & Engineering Industry

• Stable Industry with Consistent Demand
  

Our Client, with a market presence in Europe, America, and Asia, is inviting qualified candidates to fill the position as Assistant Mechanical Engineer.

RESPONSIBILITIES:

• Create detailed 2D drawings and 3D models using SolidWorks based on engineering requirements and concepts.

• Prepare manufacturing drawings, including GD&T, tolerances, BOM, and material specifications.

• Work closely with stakeholders, project managers, and cross-functional teams to refine designs and ensure manufacturability and compliance with standards.

• Update and maintain drawing revisions, documentation, and CAD data management.

• Support prototyping, testing, and production by providing accurate technical drawings and resolving design issues.

• Demonstrate a hands-on attitude by supporting prototype builds, performing basic assembly checks, and troubleshooting design issues directly on parts or assemblies.
  
  

REQUIREMENTS:

• Diploma in Mechanical Engineering or related discipline

• 1 year relevant experience

• Good knowledge, ability, and competency in SolidWorks

• Good understanding of mechanical design and technical drawings

• Proficient in 2D and 3D CAD software (SolidWorks)

• Detail-oriented with strong technical and problem-solving skills

• Good team player with a positive learning attitude
  

OTHER INFORMATION:

• Location: Tampines

• Working Days/Hours: 5 days / 9am - 6.30pm

• Salary: $3,500 + bonus + AWS (salary will commensurate according to experience & qualifications)

• The Company strives to achieve employee satisfaction and provides conducive working environment, attractive incentives and remuneration to all staff.