Total 409 system engineer job vacancies in Art / Design / Entertainment category

About the Role

We are looking for a Process Utilities Engineer experienced in semiconductor utility systems.

Responsibilities

• Design and coordinate: Chilled Water (CHW) Process Cooling Water (PCW) CDA Systems Vacuum Systems Exhaust Systems
• Prepare engineering calculations and equipment specifications.
• Review vendor and subcontractor designs.
• Support installation and commissioning activities.

Requirements

• Diploma / Degree in Mechanical Engineering or other related Engineering disciplines.
• Experience in semiconductor utility systems.
• Knowledge of SEMI standards.
• Experience in design and site execution.

• Utilize commercial and in-house EDA tools (e.g. Synopsys, Cadence, Siemens) for the design and implementation of 100 ~ 400 million gate integrated circuits in 7nm/5nm/3nm/2nm process technologies.
• Able to handle a full RTL to GDS or Gates to GDS flow, inclusive of all construction stages (e.g. Placement, clock tree synthesis, detailed routing, physical verification, formal verification and timing analysis).
• Some knowledge of front end design and synthesis is advantageous
• Proficiency in UNIX/Linux and scripting languages, e.g. tcl, bash

Required Qualifications:

• Degree, Masters or PhD in Electrical/Electronics/Computer engineering.
• Minimum of 7 years or more experience in a relevant field.

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

About the Role

We are seeking an experienced HVAC / Cleanroom Design Engineer to support semiconductor and high-tech facility projects.

Responsibilities

• Design chilled water systems, AHUs, MAUs, EFUs and cleanroom HVAC systems.
• Perform cooling load calculations and airflow analysis.
• Develop HVAC layouts, duct routing and equipment specifications.
• Review subcontractor shop drawings and technical submissions.
• Support construction, testing, balancing and commissioning activities.
• Participate in design coordination and BIM reviews.

Requirements

• Degree in Mechanical Engineering.
• 5+ years semiconductor, cleanroom or industrial HVAC experience.
• Familiar with SEMI standards and cleanroom design.
• Proficient in AutoCAD and BIM coordination tools.
• Experience in construction and commissioning preferred.

Job Title: Façade Design Engineer / Senior Façade Designer

Location: Singapore

Job Summary

We are seeking a talented and experienced Façade Design Engineer to join our growing team in Singapore. The successful candidate will be responsible for façade design development from concept design through detailed engineering and shop drawing stages, ensuring compliance with project specifications, local regulations, and industry standards.

The ideal candidate should possess strong technical knowledge of façade systems, structural design principles, and local Singapore façade design practices, with the ability to support project teams throughout the design and construction process.

Key Responsibilities

• Develop façade design solutions from concept and preliminary design stages through detailed design and construction documentation.

• Prepare façade engineering calculations, technical analyses, design reports, and supporting documentation.

• Produce and review façade shop drawings, fabrication drawings, installation drawings, and as-built documentation.

• Review architectural, structural, and consultant drawings to identify design conflicts, technical issues, and constructability concerns.

• Coordinate with clients, architects, consultants, main contractors, suppliers, and project teams on design and technical matters.

• Attend design coordination meetings, technical discussions, and project review meetings as required.

• Prepare and manage Requests for Information (RFIs), technical submissions, method statements, and material submissions.

• Ensure all façade designs comply with project specifications, Singapore building regulations, and relevant industry standards.

• Support project teams in resolving site-related technical issues during fabrication and installation stages.

• Monitor design progress and drawing submission schedules to ensure project milestones are achieved.

• Stay updated on local façade design standards, engineering practices, and industry developments.

Requirements

• Diploma or Bachelor's Degree in Civil Engineering, Structural Engineering, Architecture, Building Engineering, or a related discipline.

• Minimum 3–5 years of façade design experience within the curtain wall, façade, glazing, or building envelope industry.

• Strong knowledge of curtain wall systems, aluminium façade systems, glazing systems, and related building envelope components.

• Familiarity with Singapore building regulations, façade design standards, and industry practices.

• Ability to understand and explain differences between Singapore and Chinese façade design standards and engineering requirements.

• Experience in façade concept design, engineering design, structural analysis, detailed design, and shop drawing development.

• Ability to review structural calculations, technical drawings, and engineering documentation.

• Strong understanding of façade materials, fabrication processes, installation methods, and construction practices.

• Proficiency in AutoCAD and Microsoft Office applications.

• Experience with Revit, BIM modelling, SolidWorks, Rhino, Grasshopper, or other façade design software will be advantageous.

• Strong problem-solving, communication, and coordination skills.

• Good command of English for technical communication and coordination with project stakeholders.

Preferred Qualifications

• Experience in landmark buildings, high-rise developments, transportation hubs, commercial complexes, or architecturally complex façade projects.

• Experience with freeform, irregular-shaped, or double-curved façade systems.

• Familiarity with façade performance requirements including structural, thermal, waterproofing, air infiltration, and façade testing standards.

About the role

We are looking for a capable Process Design Engineer (Black Utilities) to support the design, coordination, and optimization of utility systems such as chilled water, heating hot water, compressed air, and steam systems. This role involves system sizing and calculation, layout development, equipment selection, and cross-disciplinary technical coordination. 

Responsibilities 

• Design black utility systems, including chilled water, heating hot water, compressed air, and steam systems.

• Perform system calculations for the above utilities and develop related system layouts, piping arrangements, and equipment specifications.

• Prepare datasheets for utility equipment and valves, and participate in technical bid evaluations.

• Maintain strong knowledge of commonly used utility equipment brands, including their features and performance characteristics.

• Coordinate with other disciplines, review returned design documents, and ensure compliance with project requirements and process standards.

• Track industry trends and support company marketing efforts and technical presentations when needed.

Requirements

• Bachelor’s degree or above in HVAC, Energy, Thermal Engineering, or a related discipline.

• At least 5 years of experience in utility system design, heating/cooling source systems, or engineering management.

• Proficient in CAD and other relevant design software.

• Strong knowledge of cleanroom design standards and specifications.

• Good communication and presentation skills, with a strong sense of responsibility and self-discipline.

• Mandarin language skills are required for coordination with Mandarin-speaking stakeholders. 
  

  If interested, please submit your application to cvs@jdawms.com with your expected salary and resume.

  We regret that only short-listed candidates will be contacted shortly. By submitting your application or resume, you agree to the collection, use, retention, and sharing of your personal information with potential employers for their assessment.

  JDA WMS Pte Ltd | EA Personnel: Pham Thi Tuyet Mai

  EA License No: 23S1595 | EA Registration No: R25127838

~ 5 days work week, Monday - Friday 9am - 6pm

~ Location: Suntec

~ No experience is welcome to apply! On the job training is provided

~ 6 months contract and convertible to permanent based on performance

Our client is a solar energy solution provider in Singapore

Responsibilities:

• Responsible for operational level understanding of the requirement of the client/customer, Site Visits, Site feasibility & Solar Systems Design and complete execution. Able to check site feasibility and provide the best suitable option for enhancing suitability.
• Designing of arrangements of the solar panels for Rooftop & Ground Mounted PV system including layouts, Single line diagram (SLD), schematic diagrams, calculation of sizing and BOQ of material. Highly experienced with Autocad.
• Drawing/Document submission/approvals, scheduling, Factory inspections, proving the guaranteed prepared a generalized check list for review of all standard. End to end execution of solar projects (Rooftop & Ground Mounted) and Service Support.
• Familiar with PV simulation software such as PVsyst and Helioscope.
• In addition to the above-mentioned duties and responsibilities, any other assignments given occasionally or daily by the immediate reporting officer

Requirements:

• Possesses minimum Degree in Electrical Engineering/Renewable energy-related field
• Minimum 1.5 year of experience in handling solar projects preferred
• No experience is welcome to apply! On the job training is provided
• Has knowledge in electrical design concepts

HOW TO APPLY:
Interested applicants, please click on “Apply Now” or email to ref32@stafflink.com.sg to submit your resume.
We regret only shortlisted candidates will be notified.

Stafflink Services Pte Ltd
EA Licence No.: 04C4294
EA Personnel: Jason Bong Wee Kiat
EA Personnel Reg. No.: R23116067

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

1.       Determined appropriate construction methods, materials, and quality standards by reviewing and coordinating structural design and shop drawings to ensure compliance with project specifications and relevant codes.

2.       Drafted, interpreted, and reviewed engineering drawings, technical specifications, and construction procedures to ensure accuracy, constructability, and adherence to design intent.

3.       Coordinated with consultants, contractors, and fabrication teams to resolve technical design issues and implement necessary drawing amendments.

4.       Prepared and submitted technical documentation, including design approval requests and revised drawings, ensuring proper document control and compliance with quality management systems.

5.       Monitored design modifications, assessed their impact on construction methodology and project progress, and facilitated necessary revisions to maintain alignment with approved designs.

6.       Reviewed and checked structural design calculations provided by consultants for temporary and permanent works, ensuring operation team can met design requirements and were suitable for safe execution.

7.       Established and maintained coordination between design and site teams to support effective execution of construction activities.

8.       Provided technical support to the construction team by addressing reinforcement and structural queries raised during inspections and site activities.

9.       Maintained updated records of structural components and construction progress to ensure accurate documentation and tracking of completed works.

Key Responsibilities Key Responsibilities

RTL Design and Verification

• Develop synthesizable RTL in Verilog/SystemVerilog for custom on-chip test, monitoring, and diagnostic IP targeting analog and mixed-signal failure detection.
• Design and verify digital logic blocks such as test controllers, sequencing logic, sensor/interface control logic, measurement and monitoring logic, data capture and comparison logic, and failure detection and reporting logic.
• Build clean register and bus-connected interfaces, for example APB, AHB, or AXI-lite based control and status paths, to enable firmware interaction and subsystem integration.
• Develop testbenches, assertions, checkers, and block or subsystem-level verification environments to validate controller behavior, detection logic, configuration programming, fault response, and status reporting.
• Plan and execute functional verification for normal, corner, negative, and fault-injection scenarios, with adequate coverage of critical diagnostic behaviors.
• Collaborate with analog and mixed-signal designers to create or use behavioral models, stubs, and interface abstractions for realistic verification of failure mechanisms and observability paths.
• Debug RTL and simulation issues through waveform analysis, assertion-based checks, root-cause investigation, and close interaction with integration and product teams.
• Ensure the RTL is modular, reusable, timing-aware, synthesis-friendly, and scalable for integration across multiple SoC derivatives.

SoC Integration

• Integrate custom DFT / diagnostic IP into SoC subsystems and system-level test architecture with proper consideration for clock/reset structure, interrupt handling, and status visibility.
• Work closely with SoC integration and DFT teams to ensure compatibility with system test infrastructure, production test flows, diagnostic mechanisms, and firmware control requirements.
• Support integration readiness by addressing CDC, reset interactions, timing considerations, low-power implications, and implementation handoff requirements.

Cross-Functional Collaboration

• Work closely with digital, analog, and mixed-signal design teams, DFT engineers, SoC architects, and product/test engineering teams throughout the design and validation cycle.
• Translate analog or mixed-signal failure modes into robust digital detection logic suitable for on-chip test, screening, and diagnosis.
• Contribute to technical discussions on architecture tradeoffs, observability strategy, and practical silicon debug readiness.

Required Qualifications

• Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field, with 5–7 years of relevant experience.
• Strong hands-on experience in RTL design using Verilog/SystemVerilog.
• Practical experience in RTL verification, simulation, and debugging methodologies.
• Solid understanding of ASIC / SoC design flow including coding, simulation, synthesis, and integration.
• Good foundation in digital design concepts such as FSM design, datapath design, bus protocols (AXI/AHB/APB), clock-domain handling, reset strategy, and timing considerations.
• Experience working in complex SoC environments with cross-functional teams.

Preferred Qualifications

• Experience developing control, monitoring, or diagnostic IP associated with analog or mixed-signal subsystems.
• Exposure to behavioral modeling or interface definition for analog and mixed-signal verification use cases.
• Familiarity with subsystem-level integration, production screening considerations, and silicon debug support.
• Working knowledge of scripting or automation for verification, regression, or design productivity is an advantage.

Description:

• You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

• Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog
• Experience in ARM or RISC-V processor system
• Experience in embedded C and assembly code programming
• Experience in analysis of power, timing and area
• Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)
• Disciplined, quality-minded, and highly driven for excellence
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 8 years of relevant experience
• Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus
• Experience in system modelling and simulation using emulator and SystemC is a plus
• Experience in UVM verification methodology is a plus
• Passionate and strong in general programming is a plus

Responsibilities

1. Develop design requirements for an NPU based on system-level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug any issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 5+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on experience in digital design is a must.
4. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
5. Experience in synthesis, with analysis of power, timing and area.
6. Disciplined, quality-minded, and highly driven for excellence.
7. Excellent team player and good communication skills.
8. MSEE/BSEE in Electrical Engineering or Computer Engineering.
9. Understanding of convolution operator and number system is required.
10. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
11. Experience in UVM verification methodology is a plus.
12. A plus to have SoC design experience.
13. Experience with optimizing micro-architectures for low-power and low-area is a plus.
14. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
15. Experience with past design experience with NPU / GPU / DSP design is a plus.
16. Experience with ARM or RISC-V processor systems is a plus.
17. Passionate and strong in general programming is a plus.

Job Description

• Industry/ Organization Type: M&E Consultancy Firm
• Position Title: Electrical Design Engineer (M&E Consultancy)
• Working Location: : East – Paya Lebar
• Working Hours: 5 Days (Monday – Friday, 8:30 AM – 6:00 PM)
• Salary Package: Basic Salary + VB
• Duration: Permanent Role

Key Responsibilities

• Build and maintain good relationships with clients, contractors, consultants, and project stakeholders.
• Follow company procedures, systems, and work processes.
• Understand M&E design concepts and explain engineering solutions clearly.
• Assist in designing, coordinating, and reviewing electrical building services systems.
• Prepare electrical drawings, calculations, specifications, schedules, and technical reports.
• Perform electrical calculations using relevant engineering software.
• Review and coordinate drawings/specifications from architects and other service engineers for proper design integration.
• Carry out investigation, technical review, and coordination for ongoing and completed projects.
• Liaise with clients, contractors, authorities, and internal teams on design and technical matters.
• Assist with authority submissions, technical documents, and project coordination when required.
• Support senior engineers to ensure work meets project requirements, codes, and standards.
• Guide students, interns, and junior engineers where required, while demonstrating professional work standards.
• Perform other duties as assigned

APPLY NOW!!!

• Degree or Diploma in Electrical Engineering.
• At least 1 year of relevant experience in an M&E consultancy firm, with exposure to ACMV, fire, or hydraulic services design.
• Experience in ACMV, fire protection, or hydraulic services coordination in an M&E consultancy environment is an advantage.
• Experience in project execution as a contractor will be considered.
• Experience in Energy Storage Systems, sustainability, resource conservation, or renewable energy is an advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #84230 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilities:

• Research, design and develop lighting systems and modules for customised products or new products.
• Evaluate and develop design improvement, technical solution and cost reduction for existing products.
• Analyse manufacturing problems and recommend solutions.
• Perform and check engineering calculations and prototypes to verify product design and production methods.
• Source for and evaluate suppliers, components and products.
• Create, monitor and evaluate test programs to verify/validate product performance.
• Prepare calculations, schedules, reports, drawings and other related documentations and analysis.
• Create, check and maintain appropriate engineering documentations in support of a product design, in accordance with Company’s procedures.
• Provide sales, production, operations and project teams with technical and design support onsite and offsite.
• Track project status and coordinate for successful testing, commissioning and completion.
• Maintain library of research data, detailed methods, evaluation of components, materials, products and production methods.

Requirements:

• Bachelor Degree in Engineering (or similar based on experience).
• Minimum 5 years of relevant working experience.
• Portfolio of products designed and produced.
• Examples of solutions engineered.
• Proficiency in the use of Microsoft Office, AutoCAD 2D/3D and lighting calculation software.
• Experience in 3D printing.
• Experience in manufacturing processes and materials.
• Advanced analytical, critical thinking and decision-making skills.
• Interest in research, dive deep on subjects and able to self-learn.
• A keen eye for detail, organized, resourceful and independent.
• Team player with excellent written, pictorial and verbal communication skills.
• Good project management skills.
• Positive attitude and commitment to make a difference.

Benefits & Others:

• 5.5-day (alternate Saturday) work week.
• Training will be provided.

RESPONSIBILITIES

Electrical:

·       Design of electrical systems accordance to IEC and Singapore Standards.

·       Design for HT/LT/ELV/ICA/ Earthing and Grounding System including design calculations,sizing’s and conceptual design drawings using advance tool and software; Cad,ETAP etc.

·       Design electrical conceptual design, SLD, project specifications, Schematics & Layout design (including library design), Cable Assembly Design & sizing.

·       Perform technical bid evaluation.

·       Work closely with Process, Mechanical, Piping and other relevant disciplines, and Quantity Surveyor.

·       Co-ordinate with clients, LEW/consultants on the technical requirements and attend technical discussions and meeting with authorities, developer, and contractors.

·       Develop interfaces for systems, sub-systems in electrical package.

·       Lead off-site/ outsource design engineers for large / multiple projects .

·       Inspect installations and observe operations to ensure compliance with design and equipment specifications and safety standards.

·       Provide technical assistance to Construction team.

·       Attend Site check/verification as and when required.

·       Attend technical meetings with clients, vendors, LEW, Consultant, FAT and SAT

·       Prepare BOQ, Material Take off.

Instrumentation and Control:

·       Design of I&C systems accordance to IEC and Singapore Standards.

·       Prepare engineering drawings / documents such as; Plant Control system Configuration,CCR and equipment room layout, Instrument datasheets, location plan, I&CCable schedule, routing drawings, Instrument Hook up and Loop drawings.

·       Design Control Logic Diagrams; OLCS & CLCS according to the process.

·       CCTV and Communication system block diagram and layout.

Pre-requisites:

·       Minimum Bachelor’s Degree in Electrical/ Instrument Engineering.

·       Minimum 5 years of design experience in Power Electronics HV/MV/LT/ELV/ICA etc.,

·       Fresh graduates are welcome to apply.

·       Proficient with MS Office Program AutoCAD. Autodesk BIM/Revit will be an added advantage.

·       Knowledge on designing in 3D layout & ETAP will be an added advantage.

·       Familiar with Singapore standards, Code of Practices, electrical design & calculation will be an added advantage.

·       Good knowledge of valve selection, flow meter selection, sizing of valves, valve actuator, flow meters and Automation system DCS/PLC.