Total 2,945 technician job vacancies

Mechanical Technician (Repair, Maintainance, Changi)

Job Responsibilities:

• Response to all equipments faults arriving onsite at equipment location
• Conduct preventive maintenance per checklist and schedule
• Conduct tools check before start work
• Able to troubleshoot and perform corrective maintenance for minor equipment faults
• Update maintenance record for PM carried out

Job Requirements:

• N level/ NITEC/Higher Nitec/Diploma in Mechanical/Electronics/Electrical Engineering
• Ability to use Schematics Diagram for troubleshooting, or repair the mechanical componets
• Understanding of computers, operating systems and network knowledge is a plus
• Class 3 Driving License is a plus

We regret that shortlisted candidates will be notified.
Registration No.: R1980765
EA License No.: 02C3423

• Well Established Company
• Basic up to $3200 + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8am to 5.10pm

Job Responsibilities:

• Perform regular checks in inventory software system to ensure inventories are in place
• Perform regular repairs and maintenance of yard and workshop tools and equipment
• Help maintain the tool room through 5S initiatives and good housekeeping practices
• Any other ad hoc duties as assigned

Job Requirements:

• Possess relevant technical certification with minimum 1-2 years relevant working experience
• Possess Class 3 and forklift driving license will be an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Technician III

• S$2,200 basic to S$3,000 basic
• 5.5 days a week
• Mon - Fri 8.30 am. to 5.30 pm
• Saturday 8.30 am to 12.30 pm
• Tuas Avenue 10

Key Responsibilities

Vehicle Maintenance & Repair

• Perform preventive, routine, and annual maintenance on heavy-duty trucks.
• Diagnose, troubleshoot, and repair mechanical, electrical, hydraulic, pneumatic, and transmission systems.
• Conduct inspections and servicing in accordance with manufacturer standards and workshop procedures.
• Perform oil, lubricant, coolant, grease, and fluid replacement across vehicle systems.
• Carry out brake system inspections, adjustments, and diagnostics.
• Perform transmission and gearbox inspections, adjustments, and repairs.
• Conduct basic wheel alignment, tyre inspections, and suspension checks.

Diagnostics & Technical Support

• Utilize diagnostic equipment and technical tools to identify fault codes and system issues.
• Read and interpret vehicle electrical circuit diagrams.
• Use multimeters and diagnostic equipment for electrical testing and fault tracing.
• Perform diagnostics on engine, transmission, braking, electrical, and telematics systems.
• Support breakdown recovery and on-site troubleshooting when required.

Quality & Compliance

• Ensure all repairs and servicing activities meet manufacturer and workshop quality standards.
• Accurately document repair activities, labour hours, and findings in work orders.
• Follow warranty procedures and service guidelines.
• Ensure genuine parts are used in accordance with service requirements.
• Maintain compliance with workplace safety, environmental, and company policies.

Operational Excellence

• Maintain cleanliness and organization of assigned work bays and workshop areas.
• Ensure proper handling and accountability of workshop tools and equipment.
• Keep Team Leaders informed of repair progress, technical issues, and additional repair requirements.
• Contribute to workshop productivity, efficiency, and customer satisfaction targets.
• Participate in technical training and skills upgrading programmes as required.

Other Duties

• Attend customer breakdowns when assigned.
• Perform any other duties assigned by management to support business operations.

Requirements

• Diploma in Automotive Engineering or related field
• Valid Singapore Class 3, 4, or 5 Driving Licence.
• 3–5 years of experience servicing and repairing heavy commercial vehicles.
• Strong understanding of vehicle systems, including: Diesel engines, Transmissions and gearboxes, Brake systems, Electrical systems, Hydraulic and pneumatic systems
• Familiarity with diagnostic tools and fault-finding procedures.

This is an excellent opportunity for automotive professionals who are passionate about vehicle technology, diagnostics, and continuous learning within a structured and safety-focused environment.

Chemical Technician (Manufacturing/ Pharma/ GMP)

12 Months Contract

Location: Gul Circle

Up to $3,000 + Shift Allowance

Industry: Pharmaceutical

Our client aims at creating a new manufacturing concept consisting of a new generation of evolutive multi-product facilities, modular, adaptable, and agile, leveraging new disruptive technologies, to better address vaccine business challenges.

Job Purpose

• Operate and monitor the chemical production activities in the plant, ensuring that the product is manufactured within set production schedule and to the required standards of quality in a safe, efficient, responsible and cost-effective manner.

Responsibilities:

• Operate the different streams of the plant for their specific processes.
• Each of these processes comprises the following activities.

1. Handover checks computerised and/or manual.
2. Obtaining, following and completing process related documentation.
3. Pre and post batch cleaning of vessels and lines.
4. Pre batch checks.
5. Charging vessels either manually or via a pump.
6. Post charging checks and taking corrective action where necessary.
7. Adjusting and monitoring process conditions as required to start the process.
8. Monitoring process; both with computer and manually observing temperature, pressure, flow, pH, volume, colour, moisture content and adjusting the parameters accordingly.
9. Carrying out routine sampling and Bulk packing and testing of samples as required.
10. Recognise end point of the reaction and altering process parameter to stop reaction.
11. Transferring product to the next stage.

• Comply with HSE and quality policies and defined procedures. Bring out unsafe conditions and acts / procedures for correction.
• Record all operational and analytical data on the appropriate documents and inform the Shift Supervisor of any process abnormalities.
• Maintain product separation and accurate labelling of all documents, bags and vessels at all times.
• Carry out routine checks and scheduled cleaning procedures including cleanrooms.
• Request and collect raw materials and consumables, observe clean areas procedures, monitor raw materials stock and notify Shift Supervisor for any abnormalities.
• Notify Shift Supervisor of requirements for maintenance. Prepare equipment before maintenance work e.g. depressurizing, cleaning of lines and equipment, de-energizing, LOTO etc.
• Perform basic maintenance of equipment using tools such as TPM.
• At the Shift Supervisor's request, to carry out on-the-job training of other Chemical Technicians, incorporating cGMP and safety procedures.
• To observe cGMP and Health & Safety rules and regulations at work at all times in accordance with Company set standards.
• To be aware of the potentially hazardous nature of the chemicals in the area and must take the appropriate precautions when using them.
• Maintain housekeeping of the plant, daily API cleanrooms cleanings and provide suggestions for improvements.
• To operate ancillary facilities e.g. water system, tank farms, solvent recovery, salt crushing activities etc.

Requirements:

• Minimum NITEC or Higher NITEC in Chemical Processing or related
• Be prepared to work 12-hour shifts and overtime.
• Able to perform manual handling tasks including lifting of materials which are weights up to 25kg.
• Medically fit, and to be part of Company’s firefighter CERT team.
• Able to use process control systems for operation of plant equipment
• Familiar with operation of manufacturing equipment such reactors, centrifuges, filters, dryers etc
• Familiar and able to apply GMP in manufacturing processes
• Able to identify and manage hazards that may occur within biopharmaceutical plant

Lim Pey Chyi - Apple.lim@manpower.com.sg

Recruitment Consultant (R2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423

Responsibilities

• In charge of supporting the clients by providing training, installation, setup, and upgrades of electronics devices
• Responsible in responding to on-site technical support requests when client raise a request.
• In charge of making scheduled visits to troubleshoot and resolve devices issues.

Requirement

• Min Nitec in Engineering and relevant
• Class 2B or 3 driving license required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of execution of service and maintenance workflow.
• Responsible for liaising closely with client representatives on all service and maintenance related issues.
• Manage day-to-day client interactions and expectations for optimal results.
• Assisting the supervisor in employing teams on service deliveries and distribute responsibilities.
• Responsible in providing support to supervisor in ensuring the timely delivery and completion of troubleshoot, service and maintenance of security systems at clients’ premises.
• Familiarise yourself and deliver customer satisfaction base on each client's business, organization and objectives.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act.
• Perform any other technical tasks as and when required.

Job Requirements:

• Min Nitec in Electrical/Electronic Engineering
• Min 2 year of working experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must
• Possess Class 2 or 3 driving license

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description:

• In charge of leading and directing projects and ensure they are directed towards a common objective
• Responsible for engaging and communicating with stakeholders to deliver project milestones and comply with strict deadlines
• In charge of ensuring client satisfaction and manage escalations, acting as single point of contact to the client
• In charge of ensuring that the project delivers as-sold solution, remains within the baseline budget and is delivered on time whilst maintaining quality criteria and client satisfaction
• Coordinate activities of the project teams through task delegation, resource assignment and programme management
• Take charge of proper documentation is in order
• Any other duties as assigned

Job Requirement:

• Minimum Nitec in Electronics / Mechanical / Electrical/ Mechatronics Engineering or related field
• Minimum with 1 year working experience in assembly of equipment / machinery industry

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

• Select, use, and maintain service tools correctly to perform assigned tasks efficiently and safely.
• Install electrical components, including switches, sensors, transducers, transmitters, current transformers, alternator components, and control panels.
• Perform engine wiring installation in accordance with engineering drawings and specifications.
• Disassemble and assemble engine components, including oil pumps, water pumps, cylinder heads, and related parts.
• Carry out engine valve lash adjustments to ensure optimal engine performance.
• Assist in and perform mechanical installation works, including radiator assemblies, couplings, engines, alternators, gearboxes, piping systems, and hoses.
• Assist in and perform alignment works for radiator assemblies, engines, and alternator installations.
• Prepare generator sets for load testing activities.
• Conduct safety device testing and load testing, including recording and documenting all required operational parameters and test results.
• Connect and utilize Electronic Technician (ET) diagnostic tools to retrieve engine diagnostic codes, event logs, and operational data.
• Perform troubleshooting and fault diagnosis on engines and generators, identifying root causes and implementing corrective actions.
• Ensure all work is carried out in compliance with safety regulations, quality standards, and company procedures.

Requirements

• Possess an ITE or equivalent.
• Minimum 5 years of relevant hands-on experience.
• Electrical hands-on experience is a must.

To submit your application, please apply online to apply@rn-care.com or call +(65) tel: 6514 9838 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description & Requirements :

Job Description and Requirements :
Job Description :

We are an established engineering system integrator looking for a skilled technician like you to bring expertise to our team.
Your primary role is to provide high quality, cost effective repair services and technical support to our valued air technology users.
You will work closely with our service, engineering and project teams in implementing this strategy.

Responsibilities :
- Troubleshooting and repair of mechanical and electrical equipment such as vacuum pumps, compressors, control panels, sensors etc.
-Running and interpreting QC tests results and make diagnostic recommendations
- Assist in preparation of service and safety documentation including Work Permits, Safe Work Procedures, Method of Statement, Risk Assessments and Service Reports
- Keeping abreast of advancements in your field, attending courses and workshops as required
- Build and maintain strong relationships with customers
- Work closely together with other technicians /engineers as a team in projects and site work

Requirements :
-Minimum higher NITEC/ITE qualification in Electrical or Mechanical Engineering
- At least 2 years experience in servicing and repair of facilities equipment. Experience in control panels, PLC, lo T, vacuum pumps, compressors and diaphragm pumps is an important plus
- Working knowledge in control panel electrical circuits & troubleshooting, Instrument circuit drawings, understand pumps construction drawings and MOM safety regulations.
- Good interpersonal and communication skills
-Able to work with others in a team
-Self motivated and result orientated
-Shows initiative and eagerness for self-improvement

Job Description

• Operate the machine and carry out the required tasks at the workstations according to the established operating procedures and safety risk assessment
• Coordinates and execute hands-on physical production task to meet daily output targets. E.g. Safely operate reach trucks and forklifts to transport raw materials, staging components, mixing blending and packaging of finished goods
• Ensure all necessary paperwork (eg: quality related checklist) for the station are completed
• Ensure the product quality is within the specification at all times
• Support production, process, maintenance, QA and project engineering activities as needed
• Support plant activities as required by Management
• Monitor the production supply required in the station and alert when necessary
• Lead problem-solving within the station
• Conduct on-the-job training for new technicians and complete all required certification forms as and when required by the company
• Lead & Deploy resources within the station and during plant shut down period
• Develop and update SOP, SRA and other training materials when needed
• Identify opportunities and work with other teams to drive continuous improvement on EHSS, cost saving, quality and/or yield
• Actively participate in EHSS activities including Concern reporting, Safety Risk Assessment (SRA) Review and EHSS committee meeting participation
• Conform to local regulations and SHEM
• Ensure housekeeping of the work area

Requirements

• Min. GCE “N”, GCE “O”, NITEC, Higher NITEC or equivalent
• Preferably minimum 1 to 2 years of hands-on experience in Manufacturing environment Compounding operation. Fresh graduate is welcome apply
• Able to control DCS consoles
• Good communication skills (both oral and written) and interpersonal skills
• Demonstrate good trouble shooting and analytical skills Independently
• Strong adherence to EHSS requirements
• Good knowledge in MS Software (Excel)
• Preferably with Forklift Driver License
• Able to perform rotating shift work

Job Description

• Industry/ Organization Type: Construction/Building
• Position Title: Electrical Technician
• Working Location: Kaki Bukit
• Working Hours: 5.5 days (Monday-Friday, 8.00am-5.00pm; Saturday, 8.00am-12.00pm)
• Salary Package: Basic salary + AWS + OT + Medical Benefits
• Duration: Permanent Role

Key Responsibilities

• Perform service and repair work at assigned sites.
• Carry out electrical installation and maintenance work at assigned sites.
• Keep all tools and equipment in good working condition.
• Ensure all work follows safety rules and regulatory requirements.
• Give timely updates to supervisors on site progress and any issues.
• Provide good service to customers.
• Support daily team operations and communicate clearly with customers and coworkers.
• Able to train coworkers on basic electrical knowledge and skills.

APPLY NOW!!!

• ITE/NTUC or equivalent certification in Electrical or a related field.
• At least 1 to 2 years of relevant work experience in a related industry; experience in residential projects is an advantage.
• Good understanding of lighting, power points, wiring, and electrical circuits.
• Positive work attitude and able to work independently.
• Valid Class 3 driving licence.
• On-the-job training will be provided.
• Entry-level applicants are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #81331 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilities

• In charge of supporting the clients by providing training, installation, setup, and upgrades of electronics devices
• Responsible in responding to on-site technical support requests when client raise a request.
• In charge of making scheduled visits to troubleshoot and resolve devices issues.

Requirement

• Min Nitec in Engineering and relevant
• Class 2B or 3 driving license required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

• In charge of inspecting and examining aircraft components for leaks, cracks, breaks, or other issues.
• In charge of reading and utilizing maintenance manuals, illustrated parts catalogues, service bulletins, and other maintenance documents to troubleshoot and complete work assignments.
• In charge of maintaining, repairing, and rebuilding aircraft structures, functional components, and parts such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, gaskets, and seals.
• Responsible in performing routine maintenance operations, such as the replacement of equipment and aircraft components.
• Responsible in interpreting specifications or diagrams to inform installation, development or operation activities.
• In charge of performing regular inspections to check for cracks, oil leaks, burned areas, foreign object damage, warping, distortions, missing segments, and wear
• In charge of completing all tasks in the allotted time frame and to the quality standards of our company
• Responsible in promoting safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines, and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns
• Taking charge of the order supplies, equipment, materials, and parts for repairs and general maintenance
• Taking charge of keeping detailed records of the inspections performed, repairs finished, maintenance procedures and ordered parts.

Requirements

• Min Nitec in Aerospace Engineering or related
• Min 5 years of working experience in Aerospace Base Maintenance

To submit your application, please apply online to apply@rn-care.com or call +(65) tel:6513 56976514 9838 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

• Responding to and resolving fault calls referred by other technicians.
• Performing basic checks and troubleshooting on PC systems and power generators.
• Liaising with relevant authorities (like NCS and LTA in Singapore) regarding application and network issues for the VEP system.
• Troubleshooting CEPAS readers and conducting monthly power generator checks.
• Arranging the deployment of other technicians and managing liaison with LTA representatives regarding project faults. .

Requirements

• Min Nitec and above
• Min 1 year of working experience

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities

• In charge of supporting the clients by providing training, installation, setup, and upgrades of electronics devices
• Responsible in responding to on-site technical support requests when client raise a request.
• In charge of making scheduled visits to troubleshoot and resolve devices issues.

Requirement

• Min Nitec in Engineering and relevant
• Class 2B or 3 driving license required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900