Total 17,597 process engineer job vacancies

Responsibilities

• Provide technical leadership and manufacturing processes, ensuring stable, high-yield production
• Lead process optimization and scale-up for resin systems, impregnation, drying, lamination, and curing processes
• Drive process qualification and validation for new materials, formulations, equipment, and process changes
• Perform advanced troubleshooting and root cause analysis to resolve yield, delamination, voids, and surface quality issues
• Establish and improve process control strategies (SPC, Cp/Cpk) for critical parameters such as resin content, gel time, flow, and curing profiles
• Analyze production data to implement continuous improvement initiatives for yield, cycle time, and throughput
• Collaborate with R&D, Quality, and Production teams on formulation improvements, NPI, and technology transfer
• Lead engineering and productivity improvement projects, ensuring measurable gains in efficiency and cost
• Drive initiatives to reduce scrap, improve material utilization, and enhance on-time delivery(OTD)
• Develop and maintain process documentation (SOPs, work instructions, control plans) to ensureconsistency and compliance
• Ensure adherence to EHS, quality, and industry standards, particularly in handling resins, solvents, and high-temperature processes
• Mentor junior engineers and act as process owner/SME, supporting capability development and operational excellence
• Perform any other reasonable duties as required by Management from time to time

Requirement

• Bachelor’s Degree in Engineering (Chemical, Materials, Mechanical or related)
• Fresh graduates are welcome to apply
• Proven expertise in process control, yield improvement, and problem-solving methodologies (SPC, DOE, Six Sigma)
• Experience in NPI, scale-up, and cross-functional project leadership

Interested applicant, please do include the below in your resumes:

Reason for leaving your last and current employment
Last Drawn Salary and Expected Salary
Earliest Availability

Responsibilities of Process Engineer

· Process Technology development for Silicon wafer manufacturing

· Manage wafer manufacturing process in achieving quality, yield, quality and production targets.

· Collaborate with Technology counterparts globally on process alignment and qualification of new processes, suppliers and consumables if needed

· Work with cross-functional teams on process capability improvement and yield enhancement projects

· Coordinate troubleshooting of process issues and yield losses

· Drive for continuous process improvement and permanent solutions to resolve chronic process and quality issues.

· Develop best practices, routines and innovative solutions for continuous improvement

· Perform Statistical data analysis for process improvement and interpretation of data

· Apply problem solving methods (8D, Fishbone, DOE etc.) and risk analysis (like FMEA)

Requirements of Process Engineer

· University degree in Engineering or Science

· Min. 1 years relevant semicon/ manufacturing experience

· Knowledge of quality management systems, data analysis, Design of Experiments (DOE) and statistical process control (SPC)

· Proficient in statistical software like JMP, visual basic, database and queries will be an added advantage

· Self-motivated and able to work well in a team

· Good analytical and communication skills

· Willingness and curiosity to learn attitude

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Mechanical / Precision Engineering or relevant
• Min 5 years of experience in Metal Casting Process

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

The Defectivity Line Control Engineer is responsible for controlling defectivity in semiconductor wafer fabrication through daily line monitoring, OOC management, tool excursion response, and cross-functional problem solving. The role supports both routine operations and improvement activities to ensure stable process performance, product quality, and effective industrialization.

Key Responsibilities

• Analyze defect Pareto, defect maps, and characterization data to identify root causes and containment actions.
• Drive tool OOC reduction and lead sporadic defect reduction activities.
• Lead the troubleshooting of defectivity alert and involve in Material Review Board for material assessment and disposition.
• Support troubleshooting of defectivity alerts and escalation of critical issues.
• Work closely with process, equipment, device, quality, and production teams to drive defect reduction and line stability.
• Support technology transfer and industrialization activities to ensure smooth deployment of new products and processes.
• Responsible for setting up, optimizing, maintaining Process Defectivity Systems like Automation system (Auto defect sampling, Auto DOI, DOLI), Defect library.
• Opportunity to involve in deployment of Advanced Defectivity Monitoring system involving AI, Convolution Neural Network (CNN) and deep learning with DIT team and opportunities to learn and apply data analytics.

Skills and Competencies

• Degree in Material Science/Electrical/Electronics/Microelectronics/Mechanical/Physics/Chemistry. 
• Preferred minimum 3 years working experience in semiconductor wafer fabrication industry and good knowledge in Defectivity methodology and knowledge of Defectivity inspection tool. Fresh graduate is welcomed to apply as well.
• Knowledge in Klarity Defects/AceXP/Space/Spotfire and other Defectivity related tool will be an added advantage.
• Strong analytical and problem-solving skills.
• Good understanding of semiconductor wafer fab processes.
• Ability to work across departments and communicate clearly.
• Proactive mindset with strong ownership and teamwork.
• Self-driven and independent with an inquisitive mind.
• Familiar with SPC concept and other problem-solving tools: SPACE, FMEA, 8D, Data mining analysis and AI base on Convolution Neural Network (CNN) will be advantageous.

Job Summary

We are looking for a Process Control System Engineer to develop and support advanced process control, automation, and AI/ML-driven solutions that enhance manufacturing performance, productivity, and operational efficiency in a high-volume production environment.

Mandatory Skill-set

• Must have Strong programming proficiency in Python;
• Hands-on experience with SQL databases for data querying, analysis, and management;
• Understanding of manufacturing processes, process control systems, and engineering principles;
• Must have experience in workflow automation, data-driven solutions, and system integration;
• Strong analytical, problem-solving, and data interpretation skills;
• Good communication skills with the ability to work independently and collaborate with cross-functional teams;

Desired Skill-set

• Exposure to AI/ML model development and deployment;
• Experience with DevOps practices, CI/CD pipelines, Git, and automated testing;
• Knowledge of containerized services and production software maintenance;
• Semiconductor manufacturing or high-volume manufacturing industry experience is preferred;

Responsibilities

• Develop and implement advanced process control, automation, and AI/ML solutions to improve manufacturing performance and productivity;
• Design and integrate data collection systems, process control workflows, and engineering solutions using Python and SQL-based technologies;
• Build, deploy, and maintain AI/ML models and operational dashboards to support manufacturing operations;
• Implement DevOps best practices, CI/CD pipelines, and version control for reliable software deployment and maintenance;
• Analyze manufacturing data, identify improvement opportunities, and drive data-driven decision-making initiatives;
• Collaborate with engineering, IT, and global teams to ensure scalable, integrated, and sustainable solutions across manufacturing sites.

Should you be interested in this career opportunity, please send in your updated resume to apply@sciente.com at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA License No. 07C5639

Responsibilities:

• Process Development & Support: Collaborate with foundries to develop and optimize process flows; interpret PDKs and process specifications to support design teams; evaluate new process nodes.
• Problem Solving: Work with foundries on failure analysis to identify root causes and drive process improvements; manage production issues and delays.
• Yield & Reliability Improvement: Analyze yield data, optimize process windows, and support reliability testing to ensure stable mass production.
• Cross-functional Communication: Serve as a technical interface between design houses and foundries; coordinate reviews to ensure alignment between design and process.
• Tape-out & Mass Production Support: Support tape-out activities, including mask data preparation and process documentation review; monitor production yield and process parameters to proactively prevent and resolve issues.
• Other ad-hoc duties as assigned

Requirements:

• Bachelor’s degree or above in Microelectronics, Materials Science, Physics, Electrical Engineering, or a related field.
• Solid understanding of semiconductor process flows; experience in process integration or process development is preferred.
• Strong data analysis skills with the ability to independently identify and resolve process-related issues.
• Excellent communication and coordination skills, with the ability to drive cross-functional problem-solving.
• Ability to effectively support international collaboration.

Brief Summary:

Join a dynamic team as a crucial link between engineering and manufacturing operations. In this role, you will oversee complex semiconductor processes, ensuring timely and quality delivery of technical specifications.

Responsibilities:

• Coordinate tasks between internal teams and external manufacturing partners to achieve timely project completion aligned with product release schedules.
• Address and resolve technical challenges by collaborating with internal engineers and external foundry personnel to deliver high-performance, manufacturable semiconductor processes.
• Assist in planning and conducting analyses to tackle process-related challenges.
• Ensure timely qualification phases and documentation for first-time-right manufacturing processes.
• Provide technical insights to guide process development, enhancing collaboration both within and outside the department.
• Conduct theoretical studies when necessary to optimize process performance for efficient development and ramp-up.
• Work closely with device engineering and foundry teams to facilitate successful process design and ensure reliability and modeling efficiency.
• Continuously refine engineering processes and standard work to improve deliverable quality and operational efficiency.
• Collaborate on qualification transitions, yield enhancement efforts, and high-volume production maintenance as needed.
• Define the roadmap for RF process technology in response to internal designs, market trends, and customer requirements.

Requirements:

• A minimum of 8 years of experience in the semiconductor industry, with at least 5 years in technical and/or project management.
• Bachelor's degree in a relevant field.
• Strong experience in semiconductor process engineering is highly preferred.
• Proficient in data analysis, with excellent problem-solving and communication skills.
• Familiarity with Cadence Layout tools.
• Extensive experience in improving process stability (CP/CPK) and yield (DFM/DFY) within RF processes.
• Demonstrated ability to lead technical processes effectively across product teams and engineering divisions.

EA License No.: 01C4394 (PERSOL SINGAPORE PTE LTD)

Registration No.: R23112488 (Julian Nerchan)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolsingapore.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Job Responsibilities:

• Quality role to handle incoming and in process quality check and control. Govern the quality control with defined specification and update COA per specific customer requirement and specification.
• Triggering for MRB review if found non-conformity of product. Attend I-share meeting Ops and engineering
• Work with internal team for customer quality issue investigation, 8D and failure verification, setting standards for quality.
• Coordinate with internal team on Change Management and call biweekly meeting with team to review the overall change request. Prepare PCN report for notification to customer and align meeting with sales and CS on communication strategy.
• Review product specification and support for banned/restricted substance analysis and coordinate with third party.
• Support on in Process/Product Quality Audit, System and Customer audit
• Working with other staffs to establish procedures and quality standards and to measure against these targets for compliances. Determining, negotiate and agree on in house quality procedures, standards and specifications.
• Team member for PDP Gate3,4 and 5 and work with innovation team on the CTQ , specification and test method during PDP
• Coordinate with engineering team on SPC review and drive for Cpk improvement activities. Assist in internal statistical information, distribution and analysis. Knowledge of SPC and ability to use Minitab/JMP.
• Training to the quality control inspector and competency development
• Engage with inspection equipment vendor on PM, Calibration and carried out GRR
• Annual Capex and headcount planning to support operation

Job Requirement:

• Degree in Engineering/Material Science/Chemistry
• At least 3 years relevant experience is required
• ISO9001 quality management system
• Knowledge in SPC, Minitab/JMP, FMEA, and process mapping

About VSMC:

VisionPower Semiconductor Manufacturing Company Pte Ltd(VSMC), a joint venture between Vanguard International Semiconductor Corporation (VIS) and NXP Semiconductors (NXP) has started construction on a 300mm wafer manufacturing facility in Singapore, targets automotive, industrial, consumer, and mobile end markets.

Role Summary:

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the specific module (Diffusion, Etch (Dry &WET), Photolithography, Metrology, Physical Vapor Deposition, Thin Film -Chemical Vapor Deposition or Chemical Mechanical Planarization).

Key Responsibilities

• Monitor and sustain production process, assist in running and verifying process recipes on respective module tools.
• Work closely with process engineers to monitor manufacturing processes to scale up capacity swiftly and maintain with quality and urgency.
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards.
• Assist to conduct experiments, analyse complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Support to analyze production anomalies and maintaining/improving statistical process control (SPC) methods to establish and uphold robust manufacturing processes.
• Operate under rotating shifts (day/night), including weekends and holidays, in a 24/7 fab environment.

Education Qualification & Essential Experiences

• Diploma’s or higher degree in Electrical and Electronics Engineering, Chemical  Engineering or STEM related fields
• Minimum of 2 years of experience as an Process Associate Engineer.
• Experience in a 12’’ (300mm) fab environment is highly preferred.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background.
• Strong analytical and problem-solving skills to achieve positive results and outcome.
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment.
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs.
• Strong attention to details, hands-on attitude, and willingness to work in shifts if required.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Job Description

• Manage a cost effective manufacturing process procedure in wafer fabrication, through the provision of engineering support to the production line, so as to achieve organization's targeted manufacturing index.
• Take full ownership on all engineering issues of assigned process.
• Maintain and support day to day manufacturing activities through real-time problem analysis and real-time solution implementation.
• Ensure smooth process flow with high quality, high yield, low cost by working with the Maintenance Specialists, Production Supervisors and Shift Engineers to achieve overall committed targets.
• Provide cross functional/cross-dept/cross-fab support & coverage based on need & priority.
• Training of new Engineers & imparting technical knowledge to them.

You will gain Technical Skills and Competencies on: -

• Wafer fabrication technology
• Fab general safety and mandatory risk assessments
• Advance semiconductor wafer process 
• Wafer handling system
• Particulate control and prevention
• SPC, FDC application for drift detection and inline prevention
• Process robustness program and improvisation 
• Innovative solutions to manufacturing quality and equipment uptime improvement

Requirements

• A Bachelor’s Degree in, Electronics and Data, Chemical, Electrical Power Engineering, etc.  
• Ability to learn new concept and have good analytical skills
• Ability to work in a fast pace environment and able to multi-task
• Self-driven and independent with an inquisitive mind
• Able to document projects and create workspace for continuity and improvement
• Ability to learn new concept and have good analytical skills.
• Ability to work in a fast pace environment and able to multi-task.
• Able to lead and participate in cross functional problem-solving teams and with good interpersonal skills.
• Self-driven and independent with an inquisitive mind.

• Perform process setup and buyoff for both Drive Backend Assembly, ensuring that yield, cycle time, and quality outcomes meet defined targets
• Support product ID label buyoff to ensure compliance with product specifications and standards• Monitor production yield to detect any excursions, conduct process mapping, and implement immediate containment (stop bleeding)
• Establish hypotheses, design experiments to identify root causes, propose corrective actions, and report findings to engineers
• Escalate process and technical issues appropriately per PMP requirements
• Conduct basic data queries and analysis to provide relevant information and insights for engineering teams
• Ensure process sustainability by monitoring KPIVs/KPOVs and managing Fast Triggering systems to maintain stable and controlled operations
• Lead or participate in continuous improvement projects aimed at enhancing production efficiency in a consistent and sustainable manner
• Perform additional tasks and responsibilities as assigned to support team, department, and company Objectives and Key Results (OKRs)

Requirements:

• Diploma in Engineering and related disciplines
• Strong data querying and analytical capabilities
• Proficient in English with strong verbal and written communication skills
• Able to perform effectively under pressure and meet deadlines
• Demonstrates strong resilience, adaptability, and positive work attitude

To submit your application, please apply online to apply@rn-care.com or call +65 6514 9838 for a private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

• Perform process setup and buyoff for both Drive Backend Assembly, ensuring that yield, cycle time, and quality outcomes meet defined targets
• Support product ID label buyoff to ensure compliance with product specifications and standards• Monitor production yield to detect any excursions, conduct process mapping, and implement immediate containment (stop bleeding)
• Establish hypotheses, design experiments to identify root causes, propose corrective actions, and report findings to engineers
• Escalate process and technical issues appropriately per PMP requirements
• Conduct basic data queries and analysis to provide relevant information and insights for engineering teams
• Ensure process sustainability by monitoring KPIVs/KPOVs and managing Fast Triggering systems to maintain stable and controlled operations
• Lead or participate in continuous improvement projects aimed at enhancing production efficiency in a consistent and sustainable manner
• Perform additional tasks and responsibilities as assigned to support team, department, and company Objectives and Key Results (OKRs)

Requirements:

• Diploma in Engineering and related disciplines
• Strong data querying and analytical capabilities
• Proficient in English with strong verbal and written communication skills
• Able to perform effectively under pressure and meet deadlines
• Demonstrates strong resilience, adaptability, and positive work attitude

To submit your application, please apply online to apply@rn-care.com or call +65 6514 9838 for a private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

• Perform process setup and buyoff for both Drive Backend Assembly, ensuring that yield, cycle time, and quality outcomes meet defined targets
• Support product ID label buyoff to ensure compliance with product specifications and standards• Monitor production yield to detect any excursions, conduct process mapping, and implement immediate containment (stop bleeding)
• Establish hypotheses, design experiments to identify root causes, propose corrective actions, and report findings to engineers
• Escalate process and technical issues appropriately per PMP requirements
• Conduct basic data queries and analysis to provide relevant information and insights for engineering teams
• Ensure process sustainability by monitoring KPIVs/KPOVs and managing Fast Triggering systems to maintain stable and controlled operations
• Lead or participate in continuous improvement projects aimed at enhancing production efficiency in a consistent and sustainable manner
• Perform additional tasks and responsibilities as assigned to support team, department, and company Objectives and Key Results (OKRs)

Requirements:

• Diploma in Engineering and related disciplines
• Strong data querying and analytical capabilities
• Proficient in English with strong verbal and written communication skills
• Able to perform effectively under pressure and meet deadlines
• Demonstrates strong resilience, adaptability, and positive work attitude

To submit your application, please apply online to apply@rn-care.com or call +65 6514 9838 for a private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Degree in Mechanical/Manufacturing/Aeronautical Engineering or equivalent.
• Minimum 3 years of working experience in MRO industry
• Knowledge of special processes such as Weldng (TIG/EBW), Thermal Spray, Heat Treatment, Machining will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

• Perform process setup and buyoff for both Drive Backend Assembly, ensuring that yield, cycle time, and quality outcomes meet defined targets
• Support product ID label buyoff to ensure compliance with product specifications and standards• Monitor production yield to detect any excursions, conduct process mapping, and implement immediate containment (stop bleeding)
• Establish hypotheses, design experiments to identify root causes, propose corrective actions, and report findings to engineers
• Escalate process and technical issues appropriately per PMP requirements
• Conduct basic data queries and analysis to provide relevant information and insights for engineering teams
• Ensure process sustainability by monitoring KPIVs/KPOVs and managing Fast Triggering systems to maintain stable and controlled operations
• Lead or participate in continuous improvement projects aimed at enhancing production efficiency in a consistent and sustainable manner
• Perform additional tasks and responsibilities as assigned to support team, department, and company Objectives and Key Results (OKRs)

Requirements:

• Diploma in Engineering and related disciplines
• Strong data querying and analytical capabilities
• Proficient in English with strong verbal and written communication skills
• Able to perform effectively under pressure and meet deadlines
• Demonstrates strong resilience, adaptability, and positive work attitude

To submit your application, please apply online to apply@rn-care.com or call +65 6514 9838 for a private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900