Total 37 quality control engineer job vacancies in Batu Kawan, Pulau Pinang

Job Scope :

• Assist in project planning, scheduling, and execution, ensuring alignment with approved project plans.
• Monitor and track site progress, ensuring timely completion and compliance with project timelines.
• Coordinate and liaise with site teams, subcontractors, consultants, and clients to resolve project-related issues.
• Conduct site inspections and quality control checks using QAQC procedures to ensure compliance with specifications and standards.
• Manage technical documentation, drawings, and reports, ensuring accuracy and proper version control.
• Provide technical solutions and support to resolve design or construction challenges.
• Ensure compliance with safety regulations and company policies at all times.

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Regular team activities
• Open culture
• Personal development opportunities

Job Scope :

• Assist in project planning, scheduling, and execution, ensuring alignment with approved project plans.
• Monitor and track site progress, ensuring timely completion and compliance with project timelines.
• Coordinate and liaise with site teams, subcontractors, consultants, and clients to resolve project-related issues.
• Conduct site inspections and quality control checks using QAQC procedures to ensure compliance with specifications and standards.
• Manage technical documentation, drawings, and reports, ensuring accuracy and proper version control.
• Provide technical solutions and support to resolve design or construction challenges.
• Ensure compliance with safety regulations and company policies at all times.

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Regular team activities
• Open culture
• Personal development opportunities

工作範圍：

• 協助專案規劃、進度安排和執行，確保與已核准的專案計畫保持一致。
• 監控和追蹤工地進度，確保按時完成並符合專案時間表。
• 與現場團隊、分包商、顧問和客戶協調聯絡，解決與專案相關的問題。
• 使用品質保證/品質控製程序進行現場檢查和品質控制檢查，以確保符合規範和標準。
• 管理技術文件、圖紙和報告，確保準確性和正確的版本控制。
• 提供技術解決方案和支持，以解決設計或施工難題。
• 始終遵守安全規章和公司政策。

福利待遇

• 佣金和獎金
• 津貼（旅費、交通費等）
• 定期團隊活動
• 開放文化
• 個人發展機會

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Perform failure analysis, root cause investigation, and fault isolation on SSD products during NPI, qualification, and mass production phases using test logs, diagnostic tools, and hardware analysis techniques. 

• Debug hardware and manufacturing-related failures by analyzing tester logs, power rails, NAND, DRAM, controller behavior, and interface issues to drive corrective and preventive actions. 

• Collaborate with cross-functional teams including Product Engineering, Process Engineering, Quality, Manufacturing, and Suppliers to resolve yield, process, and test related issues. 

• Develop and maintain debug procedures, cookbooks, troubleshooting guides, debugging tools, and knowledge databases to improve diagnostic accuracy, turnaround time (TAT), and operational efficiency. 

• Generate technical reports and present failure findings, corrective actions, and yield improvement recommendations to management and stakeholders while supporting continuous improvement initiatives. 

This position is designed for a skilled software engineer with deep expertise in manufacturing environments. At the core of this role is the active, hands-on programming of the critical interfaces that drive our production. Acting as a key link to our central department in Germany, you will be responsible for translating strategic objectives into robust software and optimized manufacturing processes. We are looking for a full-stack developer who not only designs solutions but takes ownership of the end-to-end technical implementation, bringing a passion for improving complex production systems.

Core Responsibilities

• Hands-On Software Development: Take direct ownership of the practical programming, implementation, and maintenance of mission-critical software interfaces, particularly between our MES and SAP systems. 
• Manufacturing Process Conception & Optimization: Leverage your extensive, multi-year manufacturing experience to design, analyze, and continuously optimize material flow and factory control processes.
• Execution of Centralized Goals: In close collaboration with the team in Germany, you will take ownership of strategic goals and be responsible for translating them directly into technical solutions for our global production network.

• Overall responsibility of Bosch semiconductor product and lead plant-specific simultaneous engineering team consisting of test engineer, process engineers for:
  • achieving quality, cost, delivery targets. Implementation of cost saving measures.
  • achieving yield targets, analyzing conspicuous lots and defining further actions for the lots
• Participation in lead-plant engineering meetings, discussions and stand in for plant specific interests. Reporting on plant specific topics and KPIs regarding products.
• Ensure implementation and coordination of product and process new product releases and related changes.
• Ensure ramp-up / ramp-down of products, including engineering trials and sample production.
• Responsible for Test data analysis, statistical analysis for yield improvement, lot evaluation and evaluation of customer returns. Root cause analysis of failure parts.
• Analysis of issues related to product and test system combinations.
• Issuing concessions, risk assessments, engineering change requests in cooperation with leadplant. Responsible for plant specific product documents.
• In case of quality issues, responsible for implementation of containments, root cause analysis and definition/implementation of corrective actions.
• Participation in Cost Savings Meetings.
• Responsible for the whole process chain of a product.
• Definition of criteria for active lots of release in cooperation with leadplant.
• Coaching/Training of Operators.
• Execute any other related duties assigned by immediate supervisor from time to time.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• You will work as SiP (System In Package ) package integration engineer in packaging engineering group. Leads new SiP product development from concept design and qualification to mass production. Generate innovative product concepts and transform them into tangible, market-ready products.
• Work closely with global functional teams in US, India, China, and Taiwan, review feasibility design drawings and propose design options. Collaborate extensively with internal teams, validate design options through characterization builds, perform comprehensive DFx (Design for x) analysis, Product performances , Quality , Cost , Manufacturability and etc, as well as review mechanical and electrical simulations, initiate assembly process flow, and deliver most optimized design for manufacturing with yield and quality.
• Ensuring build readiness, execute package qualification plan, follow up package reliability status, investigate and close failures on time. Monitor assembly and test yield on engineering/customer sample and low volume production builds. Drive yield improvement and manage excursions.
• Lead new product from low volume to high volume production transition with yield and quality meeting goals. Ensure FMEA, SOD, Control Plan, recipe guideline, SPC and other assembly controls are ready prior to high volume production.
• Lead new technology transition (new wafer tech/process/material) from engineering stage to volume production.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Responsible to audit line per IPQC Checklist and Work Instruction, compile & analyze IPQC audit results weekly and drive for compliances.
• Responsible to conduct buy off during conversion for items like component traceability, feeder, profile etc.
• Responsible in monitoring the process control in place for critical process.
• To participate in and monitor NPI activities (including tape board buy off).
• Monitor QA Line Stop activity daily and follow up and verify on effectiveness of corrective Action/closure.
• Responsible to perform testing and troubleshooting of circuits, components, instruments and mechanical assemblies. Managing Ongoing Reliability Test (ORT) and Outgoing Quality Assurance (OQA) inventory.
• Raise quality alert for line awareness when comes to line excursion or customer feedback.
• Other task assigned by superior.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Develop/Characterize, validate & verify new process dev for NPI products to successful qualify 
• Design and develop processes to optimize efficient process flow, reduce process or product variability, improve process capability 
• Develop process improvements for high efficiency and cost effectiveness 
• Develop and maintain process optimization and validation programs 
• Evaluate current processes and provide recommendations 
• To review & buyoff process CTQs data, PFMEA, control plan, SPC 
• To work close with design team for new packing/giftbox construction relate to process window/guideline 
• Sustaining production process/assembly engineering management: Yield/Cycle time/production efficiency CIP 
• Cost saving initiative from product and process introduction 

• Perform reliability testing to support production excursion evaluations and SIP package qualifications.
• Execute routine reliability monitoring for qualification and mass production, ensure accurate and timely data recording.
• Maintain up-to-date log sheets and documentation for all reliability test activities.
• Ensure full data traceability to support audits, reviews, and compliance requirements.
• Conduct first-level validation and preliminary analysis on reliability test failures.
• Escalate abnormal findings, equipment issues, or test deviations promptly to responsible engineers.
• Operate, monitor, and manage reliability test equipment and chambers (e.g., HAST, Temperature Cycling) in accordance with defined loading plans and procedures.
• Record, compile, and report reliability test results accurately and within defined timelines.
• Communicate effectively with engineers and stakeholders regarding test status, issues, and progress updates.
• Monitor and maintain reliability lab inventory, including test samples, consumables, tools, and equipment.
• Perform periodic inventory checks and ensure inventory records are accurate and up to date.
• Collaborate with requestors on test unit handling, disposition, and status tracking.
• Ensure adherence to laboratory safety guidelines, standard operating procedures (SOPs), and quality requirements.

• Develop and optimize burn-in test procedures for semiconductor devices, components, or systems.
• Support on Designing burn-in boards, fixtures, and test hardware.
• Analyze burn-in data to identify failure trends and root causes.
• Define burn-in conditions (temperature, voltage, duration, stress levels) according to product requirements.
• Troubleshoot hardware and process issues in burn-in operations.
• Support qualification and reliability testing (HTOL, HAST, temperature cycling, etc.).
• Ensure compliance with industry standards (JEDEC, MIL-STD, IPC).
• Automate data collection and reporting for yield and reliability analysis.
• Develop, program, and optimize AOI inspection programs for PCB assemblies.
• Set up and maintain AOI equipment (2D/3D inspection systems).
• Analyze defect data and improve detection capability while reducing false rejects.
• Troubleshoot AOI hardware, software, and vision-related issues.
• Support new product introduction (NPI) by creating AOI programs and validation plans.
• Monitor AOI performance metrics (FPY, false call rate, escape rate).
• Drive continuous improvement to reduce cost, cycle time, and failure rates.
• Responsible for pre-acceptance and release machines incl. support in setup, fine tuning, sustaining and maintenance.
• Mechanical, electrical alignment of the equipment according to supplier specification
• First contact person regarding appointments with equipment suppliers and regarding questions of the equipment suppliers. Monitoring of due dates. Technical discussions with supplier, engineering.
• Develop measures to reduce failures, to improve quality and output and to reduce costs together with the engineering
• Support improvement activities: Actively cooperate in improvement projects, bring in suggestions to improve production KPIs, like CT/ Output, Yield/OEE, Budget/Cost, reduce failures (MTBF, MTTR, down times) and improve quality
• Support and train Operators/Technician (as per Work Instruction) and execution of maintenance activities.
• 8D responsibility and hold lots dispose
• Align all changes with lead plant engineering
• Support FMEA and Control Plan
• Ensure spare part availability
• Execute any other related duties assigned by immediate supervisor from time to time. 

The Analyst 1 (Inventory Control) is responsible for ensuring inventory accuracy, integrity, and flow efficiency through data-driven analysis, system enablement, and process optimization. This role contributes from day one by strengthening inventory visibility, identifying discrepancies, and supporting operational decision-making. The Analyst also plays a key role in advancing inventory management from manual tracking to automated, system-driven, and intelligent control environments.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Analyze inventory data to identify discrepancies, trends, and improvement opportunities.
• Maintain high levels of inventory accuracy and data integrity across systems (WMS/ERP/MES).
• Monitor inventory movements (receipts, storage, kitting, issuance) and highlight risks such as shortages, excess, or misalignment.
• Support cycle count processes, variance analysis, and root cause identification.
• Ensure proper tracking and control of non-conforming inventory (e.g., MRB, damaged, expired).
• Enable real-time inventory visibility through dashboards and system tools.
• Identify and implement improvements to reduce manual tracking and improve system reliance.
• Support automation and digitalization initiatives (e.g., system enhancements, data integration, workflow automation).
• Apply structured problem-solving using data to eliminate recurring inventory issues.
• Collaborate with Operations, Planning, Procurement, Finance, QA, and IT to resolve inventory-related issues.
• Maintain process standards, SOPs, and system data structures to ensure consistency and audit readiness.
• Take ownership of assigned inventory processes and drive continuous improvement.
• Uphold EHS/ESD/5S standards in all activities.
• Validate and maintain inventory master data and transaction accuracy in WMS/ERP systems.
• Investigate transaction failures or data inconsistencies and coordinate resolution with relevant teams.
• Support inventory reconciliation activities and ensure timely closure of discrepancies.
• Monitor key inventory parameters (e.g., stock levels, aging, excess, shortages) and escalate risks.
• Contribute to process improvements that enhance inventory control and reduce operational inefficiencies.
• Participate in digital initiatives such as system upgrades, automation projects, and data workflow improvements.
• Assist in developing data models, dashboards, or tools that improve inventory control and decision-making.
• Continuously improve data quality, process flow, and system utilization.
• Support audit and compliance activities (ISO/internal/external) related to inventory control.
• Handle assigned operational tasks and cross-functional requests in a timely and structured manner.

KEY PERFORMANCE INDICATORS:

• Inventory Accuracy ≥ 99%
• Cycle Count Accuracy and Closure Timeliness
• Data Integrity Across Systems (WMS/ERP/MES consistency)
• Inventory Health: Reduction in excess, aging, and stock discrepancies
• Process Efficiency: Reduction in manual interventions or reconciliation effort
• Digital Contribution: Implementation of automation, dashboards, or system improvements
• Issue Resolution Effectiveness: Timely identification and closure of inventory gaps
• Audit Compliance Rate: 100% without findings

What Success Looks Like (First 6–12 Months):

• Maintains high inventory accuracy and data integrity across systems
• Identifies and resolves inventory discrepancies proactively
• Contributes to measurable improvements in inventory health and control
• Implements at least one digital or process improvement initiative
• Demonstrates ownership of an inventory process area

ESSENTIAL DUTIES AND RESPONSIBILITIES 

In this position, you will work in the Material Engineering team within the Packaging R&D organization who owns and deploys best-in-class material engineering solutions to the top-edge product and technology development across advanced semiconductor packaging, flash memory product and host levels. Your essential duties and responsibilities include:

• Drive advancement in packaging materials by addressing material-related design and process challenges. Develop solutions to support next-generation package requirements, including smaller form factors, thinner die, higher interconnect density, increased power, and enhanced reliability.
• Lead the evaluation, development, and qualification of advanced packaging materials for both product development and high-volume manufacturing. Ensure compliance with industry standards and sustain high material quality to enable reliable, high-yield, and cost-efficient manufacturing.
• Responsible for material characterization, lab testing, and design of experiments (DOE) to simulate manufacturing processes and use-condition failure. Analyze thermal, mechanical, and environmental performance to ensure materials meet reliability and performance targets.
• This position will interface with package and product design (in particular, thermal and mechanical), reliability, failure analysis, assembly R&D, and process teams to define material requirements and solutions. Collaborate with suppliers to develop, optimize, and qualify materials for successful production integration.

We are seeking a highly skilled and innovative senior engineer to lead our technical team in bringing new products to market within a dynamic environment. In this role, you will lead and contribute to the development and implementation of advanced test engineering strategies for our cutting-edge storage products. Below are the key responsibilities:

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Optimize Test Strategies: Design and execute efficient test plans, test time, yield, and quality to meet factory financial goals. Identify cost-effective testing methods through troubleshooting, validation, and continuous improvement.
• Lead and Collaborate on Engineering Solutions: Lead and implement innovative engineering solutions while collaborating with cross-functional teams to ensure project success under competitive timeline.
• Champion Innovation and Cost Efficiency: Collaboratively integrate advanced testing technologies, research, and adopt cost-saving solutions like Test Time Reduction (TTR) and new test platforms, driving CAPEX reduction. Continuously improve test programs and test infrastructure to enhance product quality and reliability.
• Technical Expertise and Support: Provide leadership in electrical failure analysis (EFA), exploring new test method/EFA technique to address RMAs, production, reliability, and DPPM improvement. Analyze test results and deliver reports to stakeholders with actionable insights for improvement.
• Technical Communication and Documentation: Develop and deliver clear, concise technical reports and documentation, including EFA, work instructions, test equipment guidelines, test reports, and specifications.
• NPI Support: Lead NPI projects, ensuring smooth transfer of test technology to mass production.
• Knowledge Sharing and Mentorship: Mentor junior engineers, promote best practices, and facilitate knowledge transfer through technical training.

As a Test Engineer - Process, you will lead the Project improvement in Burn In area, and support execution and manufacturing issues related to Test Process, and continue improve manufacturing issues with new ideas from time to time through close collaboration across teams and disciplines. In addition, you'll drive Test Process improvements to make our systems more robust and scalable via systematic and proper tools.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Own and sustain burn-in manufacturing processes to ensure stable production performance.
• Monitor burn-in process health, yield trends, uptime, and quality indicators.
• Analyze yield excursions, failures, and process deviations using data-driven methodologies.
• Lead root cause analysis (RCA) and corrective/preventive actions (CAPA).
• Drive continuous improvement initiatives to improve burn-in efficiency, reliability screening effectiveness, and cost reduction.
• Provide timely disposition and technical support for production issues impacting shipment and manufacturing flow.
• Support lot handling, disposition decisions, and recovery actions during abnormal events.
• Support qualification and release of new products into burn-in manufacturing.
• Partner closely with product managers, NPI engineers, Assembly engineers, Manufacturing supervisor and QA to scope, plan, design, and build new features as well as maintain existing functionality.
• Generate and maintain SOPs, OCAPs, FMEA, control plans, and engineering documentation.
• Ensure compliance with manufacturing standards, ESD requirements, and quality management systems
• Participate in audits and customer quality reviews as required.
• Leverage your experience and knowledge to grow your teammates’ technical breadth and depth through direct coaching and mentoring