Total 20 Senior Executive process improvement manager job vacancies in The Philippines

Job Responsibilities

1. Process Design and Engineering

• Develop process solutions for pure water, ultra-pure water (UPW), wastewater treatment, and water reclamation systems based on client requirements and water quality data.
• Evaluate and optimize treatment processes to achieve technical and economic objectives.
• Prepare Process Flow Diagrams (PFDs), Piping & Instrumentation Diagrams (P&IDs), and process design documents.
• Perform engineering calculations, including:
• Water balance calculations
• Chemical dosing calculations
• Membrane system design
• Tank sizing calculations
• Hydraulic calculations
• Sludge generation calculations

2. Equipment Selection and Cost Estimation

• Select and specify major treatment equipment, including:
• Reverse Osmosis (RO) systems
• Ultrafiltration (UF) systems
• Electrodeionization (EDI) systems
• Mixed Bed systems
• Membrane Bioreactor (MBR) systems
• Moving Bed Biofilm Reactor (MBBR) systems
• Dissolved Air Flotation (DAF) systems
• Filter Presses
• Prepare equipment lists and Bills of Materials (BOM).
• Conduct project cost estimation and budget preparation.
• Coordinate with suppliers on technical specifications and quotations.

3. Technical Support and Client Communication

• Participate in technical discussions, site surveys, and client meetings.
• Review and analyze water quality reports and treatment requirements.
• Prepare technical proposals, technical specifications, and tender documents.
• Provide technical support to the sales and business development teams.
• Respond to client inquiries and recommend process improvements where necessary.

4. Project Execution Support

• Provide technical handover and engineering support to project execution teams.
• Support procurement activities by clarifying technical requirements.
• Assist with system commissioning, start-up, and process optimization.
• Troubleshoot and resolve process-related issues during project implementation and operation.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Nearby public transport
• Casual dress code
• Free snacks / Happy hours
• Regular team activities
• Medical insurance
• Personal leave
• Sabbatical leave
• Open culture
• Personal development opportunities

工作職責

1. 製程設計與工程

• 根據客戶要求和水質數據，開發純水、超純水 (UPW)、廢水處理和水回收系統的製程解決方案。
• 評估並優化處理工藝，以實現技術和經濟目標。
• 編制製程流程圖（PFD）、管線和儀表流程圖（P&ID）以及製程設計文件。
• 進行工程計算，包括：
• 水量平衡計算
• 化學藥劑劑量計算
• 薄膜系統設計
• 儲罐尺寸計算
• 水力計算
• 污泥產生量計算

2. 設備選擇與成本估算

• 選擇並指定主要處理設備，包括：
• 逆滲透（RO）系統
• 超濾（UF）系統
• 電去離子（EDI）系統
• 混合床系統
• 膜生物反應器（MBR）系統
• 移動床生物膜反應器（MBBR）系統
• 溶解氣浮（DAF）系統
• 壓濾機
• 編制設備清單和物料清單（BOM）。
• 進行專案成本估算和預算編制。
• 與供應商協調技術規格和報價。

3. 技術支援與客戶溝通

• 參與技術討論、現場勘測和客戶會議。
• 審核和分析水質報告和處理要求。
• 準備技術方案、技術規格和招標文件。
• 為銷售和業務拓展團隊提供技術支援。
• 回覆客戶諮詢，必要時提出流程改善建議。

4. 專案執行支持

• 為專案執行團隊提供技術交接和工程支援。
• 透過明確技術要求來支援採購活動。
• 協助進行系統調試、啟動和流程優化。
• 在專案實施和運作過程中，排查並解決與流程相關的問題。

福利待遇

• 員工權益
• 佣金和獎金
• 津貼（旅費、交通費等）
• 附近公共交通
• 休閒著裝要求
• 免費小吃/歡樂時光
• 定期團隊活動
• 醫療保險
• 個人休假
• 學術休假
• 開放文化
• 個人發展機會

About Us

Commerze Capital Sdn Bhd is an emerging financial solutions provider focused on empowering SMEs through invoice factoring, pre-financing, and supply chain financing—particularly for those involved in government, GLC, and PLC contracts. By collaborating with leading financial institutions and ecosystem partners, we provide businesses with the working capital and financial flexibility they need to grow with confidence.

As part of our ongoing expansion, we are looking for a Relationship Manager to join our passionate team and help strengthen our engagement with SMEs, business associations, and corporate partners across Malaysia.

Key Responsibilities

• Develop and nurture strong relationships with SMEs, corporate clients, and key stakeholders.
• Identify and pursue financing opportunities within government, GLC, and PLC contract networks.
• Oversee the end-to-end client onboarding process—from application to disbursement.
• Provide tailored financial advisory on Commerze Capital’s range of financing solutions.
• Collaborate with internal teams to ensure efficient processing, accurate reporting, and client satisfaction.
• Represent Commerze Capital at industry events, networking sessions, and business forums.
• Contribute to achieving company sales goals and business growth targets.

Requirements

• Bachelor’s degree in Business, Finance, Marketing, or a related discipline.
• 2–4 years of experience in relationship management, SME banking, or B2B sales.
• Strong knowledge of SME financing, supply chain, or trade-related financial products.
• Excellent communication, negotiation, and presentation skills.
• Proactive, results-oriented, and capable of working both independently and in a team.
• Proficient in both Bahasa Malaysia and English (spoken and written).

What We Offer

• Competitive salary package with attractive performance-based incentives.
• Career growth opportunities with one of Malaysia’s up-and-coming SME financing providers.
• Exposure to collaborations with government bodies, GLCs, PLCs, and industry associations.
• A dynamic, supportive, and collaborative work environment where your ideas make an impact.

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Nearby public transport
• Flexible working hours
• Casual dress code
• Company trips
• Personal leave
• Open culture
• Dental insurance
• Paid training and development

關於我們

Commerze Capital Sdn Bhd 是一家新興的金融解決方案提供商，致力於透過應收帳款保理、預融資和供應鏈融資賦能中小企業，尤其關注那些參與政府、官聯公司和上市公司合約的企業。我們與領先的金融機構和生態系統合作夥伴攜手合作，為企業提供所需的營運資金和財務靈活性，協助其穩定發展。

作為我們持續擴張計劃的一部分，我們正在尋找一位客戶關係經理加入我們充滿熱情的團隊，以幫助加強我們與馬來西亞各地中小企業、商業協會和企業合作夥伴的關係。

主要職責

• 與中小企業、企業客戶和主要利害關係人建立並維護牢固的關係。
• 在政府、GLC 和 PLC 合約網路中尋找並尋求融資機會。
• 全面負責客戶入職流程－從申請到付款。
• 針對德國商業資本的各種融資解決方案，提供量身訂製的財務諮詢服務。
• 與內部團隊合作，確保高效處理、準確報告和客戶滿意度。
• 代表 Commerze Capital 出席業界活動、交流會和商業論壇。
• 為實現公司銷售目標和業務成長目標做出貢獻。

要求

• 商業、金融、行銷或相關專業的學士學位。
• 2-4 年客戶關係管理、中小企業銀行或 B2B 銷售經驗。
• 具備中小企業融資、供應鏈或貿易相關金融產品的紮實知識。
• 優秀的溝通、談判和表達能力。
• 積極主動，以結果為導向，既能獨立工作也能團隊合作。
• 精通馬來語和英語（口語和書面）。

我們提供的服務

• 具競爭力的薪資待遇，以及優厚的績效獎金。
• 加入馬來西亞一家新興的中小企業融資機構，獲得職涯發展機會。
• 有機會與政府機構、官聯公司、上市公司和行業協會合作。
• 充滿活力、互助協作的工作環境，在這裡你的想法能夠產生影響力。

福利待遇

• 佣金和獎金
• 津貼（旅費、交通費等）
• 附近公共交通
• 彈性的工作時間
• 休閒著裝要求
• 公司旅行
• 個人休假
• 開放文化
• 牙科保險
• 有薪培訓和發展

Job Description:

• In charge of ensuring the implementation of Lean/Continuous Improvement tools & Lean projects in the company
• Responsible for expanding and sustaining the lean deployment efforts through facilitating Value Stream Mapping (VSM), Kaizen and Continuous Improvement events
• In charge of identifying, deployment and driving successful completion of Lean projects/initiatives
• In charge of leading Continuous Improvement initiatives and managing the efficiently the sharing of best practices among departments

Job Requirement:

• Minimum Degree in Aersopace Engineering or relevant
• Minimum 5 years of working experience in driving continous improvement projects
• Experience in Lean Six Sigma Green/Black Belt, JIRA, Power BI, VBA and Macros will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

JOB SCOPE & JOB RESPONSIBILITIES

• Familiar with RO, demin, mixed bed, ultra-pure, neutralization, chemical preciptation (including HF, heavy metal, backgrind etc.), biological treatment etc. and specialty processes.
• Develop process design packages: heat & mass balances; PFDs; P&IDs; process calculations.
• Perform equipment sizing and prepare specification (pumps, blowers, air compressors, vessels, tanks) and materials selection; define instrumentation and control philosophy with cause-and-effect matrices.
• Liaise with OEMs/vendors to validate technologies and recommend best-fit solutions based on performance, compliance, schedule, and total cost of ownership (CAPEX+OPEX); drive technical clarifications and value engineering.
• Prepare and review equipment lists, line lists, valve list and load lists as required.
• Prepare and check process datasheets for RFQs; evaluate vendor proposals for compliance with technical specs, codes, and regulations; lead technical clarifications.
• Prepare technical proposal according to client's RFQs. Provide solution to clarifications and prepare cost estimation.
• Plan and participate in HAZOP and related reviews, coordinate action close-out.
• Produce/peer-review submission documentation; support project FAT/SAT, plant start-up, performance testing, process optimization, and handover.
• Compile/author ITP/IP and IOM manuals; interface with multidisciplinary teams (C&S, MEICA, controls) and construction/site teams.

JOB REQUIREMENTS

• Degree in Chemical or Environmental Engineering (or equivalent)
• Standards & codes: Familiar with relevant international standards/codes and onshore/offshore practices
• Proficiency with MS Office
• Working knowledge of AFT Fathom (hydraulic analysis) and AutoCAD Plant 3D (P&ID) is an advantage

WORK EXPERIENCES

• Process Engineer: More than 2 years in a similar scope, preferably in Oil & Gas, Power, or Water/Wastewater
• Senior Process Engineer: More than 5 years with demonstrated leadership in design reviews, HAZOP facilitation/close-out, vendor management and mentoring junior engineers.

We are seeking an experienced Senior Process Engineer to join our client’s dynamic team.

Job Description (JD)| Senior Process Engineer

This role focuses on patient acquisition, conversion, and relationship management.

Role Summary:

This is a full-time, permanent role where the incumbent will play a crucial part in the design, implementation and optimization of our client’s industrial water treatment processes.

Responsibilities

• Lead the development of mass balances, hydraulic profiles (P&IDs) and process flow diagrams for water treatment plants.

• Conducting process modelling, simulations and pilot testing to validate new technologies and process improvements

• Size and specify process equipment, such as pumps, blowers, tanks and etc. to meet system performance and reliability requirements

• Evaluate supplier proposals, quotations to ensure compliance with technical and commercial requirements

• Collaborating with cross-functional teams to plan and execute projects

• Provide onsite technical support during project execution and lead troubleshooting of operational issues

• Lead plant testing and commissioning.

• Prepare commissioning plans, SOPs, O&M manuals and training materials.

• Support proposal development and tender preparation.

• Mentor junior engineers and designers.

• Execute other ad-hoc tasks assigned to support project and team objectives

Requirements

• Degree in Chemical Engineering, Environmental, Civil Engineering or a related technical discipline

• 8+ years' experience as a Process Engineer or Senior Process Engineer, preferably in the water treatment industry

• Proficient in AutoCAD

• Strong problem-solving, analytical and critical thinking skills

• Excellent interpersonal and communication skills

Com & Ben Packages

• Monthly Basic salary ranges from S$4k to S$7k

• Annual Leaves, Medical Leaves are as per Singapore’s statutory laws.

• Career development opportunity

• The HR Management team is very friendly and co-operative .

Please contact Recruitment Manager Leeza Shaheed (Registration ID: R1770675) at leeza@aethelra.com, info@aethelra.com, aethelraconsulting@gmail.com for further enquiries about the roles and mention the following information on your CV: Executive summary, Nationality, Language proficiencies, Total years of experience, relevant work-related experience- for how many years, availability, expected monthly basic salary, latest drawn monthly basic salary.

AethelRa Consulting Pte. Ltd. UEN: 202536338H | EA Licence No.25C3084

1 North Bridge Rd, #18-03, High Street Centre, Singapore 179094

Emails: leeza@aethelra.com| info@aethelra.com | aethelraconsulting@gmail.com

Website: https://aethelra.com

LinkedIn: https://www.linkedin.com/in/aethelra/

Key Tasks and Responsibilities:

• Technical Guidance – Provide expert advice and technical support to the wider BWO organisation on Process Safety / Technical Safety activities in Asset Operations, Projects and Concept Development.
• Verification Activities – Ensure Asset Operations and Projects compliance with Technical Standards, Design Performance Standards and Operational Performance Standards. Support the internal verification process, performing process safety verification activities in coordination with the Verification / Continuous Improvement department.
• Monitor and report Key Performance Indicators (KPIs) related to Process Safety. Conduct regular performance analysis to uncover weak signals and proactively identify areas of improvement.
• Support development and maintenance of BWO’s Technical Standards – These define the minimum requirements for Asset Operations and Projects within own discipline.
• Support Level 3 Incident Assessments, where required.
• Continually seek improvements in personal areas of responsibility.

Qualifications:

• A minimum of 10+ years’ experience in the offshore Oil & Gas industry, or closely related industry.
• Technical Safety experience in Projects is required, preferably within the FPSO industry.
• Operational expertise from both project and operations phases of offshore facilities, including experience in audit and verification activities is preferred.

Skills:

• Team player with the ability to lead.
• Proactive and able to work independently, applying a structured and systematic approach.
• Strong communication skills and the ability to ask relevant questions and provide thorough explanations.
• Ability to deliver high quality work on time.
• Ability to work in a multidisciplinary / multinational environment.
• In-depth knowledge of Technical Safety design and Process Safety.
• Well-versed in relevant international Codes and Standards.
• Good awareness of safety management systems and best practices across the industry.

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job requirement:

• Ability to perform first level investigation out of control situation and line excursions, abnormal lot/tool judgement due to inline OOC and OOS from SPC Chart.
• Process condition optimization.
• Work closely with equipment and production to ensure key module objectives are met.
• Evaluation to improve process margin.
• Cost reduction projects.
• Ensure safety, discipline and housekeeping compliance by all personnel.
• Analyze different types of defects and provide clear problem description with maintenance counterparts on troubleshooting.

Job requirement:

• Diploma in Electrical/Electronics/Chemistry/Microelectronics/Engineering or equivalent.
• Relevant working experience in Photo Process semiconductor front-end industry
• Willing to work in cleanroom environment.
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Description
The Senior Engineer, Process Development & Sustaining will lead the development, optimization, and sustaining of manufacturing processes for WD's HDD storage products. This is a technically deep, cross-functional role requiring strong foundation in chemistry, materials science, or chemical engineering.

You will drive process characterization, chemical/material qualification, and yield improvement initiatives while ensuring manufacturing processes remain stable, compliant, and cost-competitive. You are expected to operate with high technical autonomy, interface with global R&D and process teams, and mentor junior engineers on the Penang floor.

This role is ideal for a Master's, or Bachelor's graduate in Chemical Engineering or Materials Science who is passionate about translating lab-scale science into high-volume manufacturing solutions.

Key Responsibilities

Process Development

• Design and develop new manufacturing processes or significantly improve existing ones for HDD production
• Conduct Design of Experiments (DOE) to characterize process windows, identify critical process parameters (CPPs), and optimize process outputs
• Evaluate and qualify new chemicals, materials, and process consumables for manufacturing use
• Develop process recipes, control plans, and standard operating procedures (SOPs)
• Translate R&D/lab-scale processes into robust, scalable, high-volume manufacturing processes

Process Sustaining

• Own sustaining engineering for assigned process modules — ensure processes remain stable, in control, and within specification
• Monitor Statistical Process Control (SPC) charts; respond to out-of-control signals with structured problem-solving
• Lead Engineering Change Orders (ECOs) for process changes, chemical substitutions, and material updates
• Manage process deviation requests and ensure timely resolution
• Maintain process documentation, control plans, and work instructions per WD QMS

Chemical & Material Engineering

• Lead chemical/material qualification activities including incoming material testing, process compatibility studies, and shelf-life evaluations
• Evaluate alternative chemistries and materials for cost reduction, sustainability, or supply chain risk mitigation
• Work with EHS team to ensure safe handling, storage, and disposal of process chemicals per regulatory requirements
• Support RoHS, REACH, and PFAS compliance reviews for process chemicals and materials

Yield & Quality Improvement

• Lead yield loss analysis and drive structured RCCA (Root Cause and Corrective Action) for process-related defects
• Apply Six Sigma / SPC / Lean methodologies to reduce process variation and improve Cpk
• Partner with Quality Engineering to resolve customer escapes and field returns linked to process issues
• Drive continuous improvement projects with measurable cost and quality impact

NPI & Technology Transfer

• Support New Product Introduction (NPI) process readiness — from process concept to mass production release
• Lead or support technology transfer of new processes from R&D/HQ to Penang manufacturing
• Develop process qualification protocols (PQ), installation qualification (IQ), and operational qualification (OQ) plans

Cross-Functional Collaboration

• Interface with R&D, Product Engineering, Quality, EHS, Supply Chain, and Equipment Engineering teams globally
• Present process data, findings, and recommendations to senior management and global stakeholders
• Collaborate with equipment engineers on process-equipment interactions and optimization

People & Mentorship

• Mentor and coach junior and mid-level process engineers
• Lead technical reviews, knowledge-sharing sessions, and engineering forums
• Support capability building within the Penang process engineering team

We are seeking an innovative and technically skilled researcher to join our team, specializing in adaptive machining. is a key technology for generative and regenerative applications at the heart of ARTC’s remanufacturing and manufacturing research. We are looking for people with the passion and drive to join us as part of the Remanufacturing Process Technology (RPT) Group. The scope of the role will be to work on research in advancing machining technologies by integrating adaptive techniques, leveraging knowledge in CNC machining, CAD/CAM programming, software development, and basic Artificial Intelligence (AI) concepts. This role provides an exciting opportunity to contribute to cutting-edge research aimed at improving efficiency, precision, and sustainability in machining processes.

Responsibilities:

• Perform research, conduct experimental work and analysis in a project-based environment
• Lead / Support the technical execution and delivery of projects, including project scoping activities and industrial customer engagement as well as capability development in line with the technical roadmap of the Group and Division, fostering collaboration with other teams / groups / research entities as needed
• Conduct research on adaptive machining techniques, including automated decision-making systems, dynamic process adjustments, toolpath optimization, scanning and data gathering technologies, and machine to machine communication.
• Algorithm Development: Design, develop, and implement algorithms for 3D data analysis for feature recognition and machining strategy selection for automatic tool path generation, and adaptive machining. Collaborate with cross-functional teams to integrate these algorithms into existing machining systems.
• Data Analysis: Analyse large datasets generated from machining operations to identify patterns, anomalies, and optimization opportunities. Develop predictive models to optimize machining parameters and improve overall efficiency.
• Documentation and Reporting: Prepare technical reports, documentation, and presentations to communicate research findings, project progress, and recommendations to stakeholders. Publish research papers in relevant journals and present findings at conferences and seminars.
• Technical Innovation Culture: Mentor and coach interns, fostering a culture of technical innovation and excellence.
• Any other ad-hoc work for the team, Group, Organisation and A*STAR with possible secondary roles

Job Requirements:

• At least a Bachelor’s Degree in in Mechanical Engineering, Manufacturing Engineering, Computer Science, or a related field.
• Prior experience of CNC machining, familiarity with machining processes and equipment, knowledge of machine communication (OPC-UA, TCP/IP) is advantageous.
• Proficiency in CAD/CAM/CAE software, preferably in Siemens NX / Solidworks / PowerMill
• Proficiency and/or knowledge in programming languages such as Python, VB.Net, C#, C++, MatLab, etc.
• Preferably with experience working in an industry-driven R&D environment
• Fluency in English with good written, spoken and comprehension skills
• Ability to communicate, interact and work professionally in a collaborative environment as a team player
• Ability to work in a dynamic fast-paced environment in an agile manner to adapt to fast-changing requirements of internal and external stakeholders
• Ability to think critically and is problem-solving oriented
• Ability to work effectively and independently
• Ability to demonstrate high level of initiative to learn and adapt new technologies to stay relevant

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Summary

The ideal candidate will lead Topsides Process Engineering for FPSO, FLNG, or offshore projects, providing strategic focus across Conceptual, pre-FEED, FEED, and EPC(I) phases with hands-on engineering expertise and leadership in offshore oil and gas.

Responsibilities

• Lead development and continuous improvement of corporate technical standards, procedures, workflows, and engineering platforms to ensure practical, fit-for-purpose solutions incorporating project lessons learned
• Manage topside process engineering resources by monitoring project progress and assigning competent personnel aligned with project needs in close collaboration with Project Management Teams
• Maintain and disseminate the Lessons Learned database for project execution and operations to enable preventive and mitigative actions and promote design standardization
• Serve as Project Discipline Lead for Topsides Process, applying hands-on engineering expertise to guide project execution and technical decisions
• Report regularly to Head of Process Discipline on project concerns, resource planning, progress updates, and forecasts, participating in corporate meetings
• Provide technical guidance and career development opportunities for engineers and designers, facilitating access to international conferences and training
• Support Hanwha Ocean engineering teams across global locations including India, Seoul, and Houston for offshore project phases from Conceptual to FEED
• Travel internationally as required to support project and team needs

Required competencies and certifications

• Bachelor’s or Master’s degree in Petroleum or Chemical Engineering
• Proven hands-on process engineering experience in FPSO or offshore EPCI projects, including process simulation (steady state, dynamic), HB/MB, utility consumption, blowdown/flarenet studies, hydraulic and equipment sizing, control narrative, HAZOP, and technical safety action close-out
• Experience leading FPSO FEED/EPCI projects as Project Lead for Topsides Process, covering Conceptual and Feasibility Studies
• Experience managing topside process engineering resources and project progress in offshore or onshore oil and gas industry projects
• Proficiency with process engineering tools such as Aspen HYSYS, Flarenet, Pipe-net, or equivalents, with ability to interpret simulation results
• Extensive knowledge of process engineering principles, industry codes, standards, and scientific problem-solving methods
• Strong analytical and problem-solving skills applied to engineering challenges
• Effective communication skills in English, both oral and written, to collaborate with multidisciplinary teams, vendors, and clients
• Ability to work independently and collaboratively with strong attention to detail and accuracy

Preferred competencies and qualifications

• Experience in Field Engineering during construction or onshore/offshore commissioning phases
• Familiarity with zero carbon emission technologies and CCUS (Carbon Capture, Utilization, and Storage) technologies