Total 497 systems engineer job vacancies in The Philippines

Job Description:

• In charge of leading and directing projects and ensure they are directed towards a common objective
• Responsible for engaging and communicating with stakeholders to deliver project milestones and comply with strict deadlines
• In charge of ensuring client satisfaction and manage escalations, acting as single point of contact to the client
• In charge of ensuring that the project delivers as-sold solution, remains within the baseline budget and is delivered on time whilst maintaining quality criteria and client satisfaction
• Coordinate activities of the project teams through task delegation, resource assignment and programme management
• Take charge of proper documentation is in order
• Any other duties as assigned

Job Requirement:

• Minimum Diploma in Electronics & Communication Engineering or related field
• Minimum with 2 years’ relevant work experience in Security Industry
• Basic technical knowledge on ELV, Automation, Networking and Security Systems (CCTV, Card Access, Alarm System) will be an advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of designing the PCB layout of electronic circuit boards and generate Gerber files for PCB fabrication.
• Responsible in research and define efficient and reliable architecture to fulfil electronic circuit board requirements for the company drone systems.
• In charge of firmware programming in embedded C/C++ language.
• In charge of testing PCB assemblies thoroughly and ensure they operate as expected.
• Responsible in sourcing suitable electronic components to implement the design architecture.
• In charge of studying datasheets of the electronic components and design the schematic of electronic circuit boards that can fulfil the requirements.
• Responsible in generateing documents and drawings of design and test.

Job Requirement:

• Minimum Degree in Mechanical/ Electrical/ Aerospace/ Mechatronics Engineering or relevant
• Minimum 3 years of working experience in electronic hardware and firmware design
• Experience in analog and digital circuit design with experience in designing electronic circuits with microcontrollers, digital signal processors (DSP), field programmable gate arrays (FPGAs), etc
• Proficient in schematic and PCB design tools such as Altium Designer, OrCAD Capture and PCB Designer, Autodesk EAGLE, etc and using instruments such as multimeters, oscilloscopes, logic analysers, etc. to troubleshoot issues on electronic circuit boards.
• Proficient in C/C++ programming language.
• Knowledge in various communication buses and protocols such as UART, I2C, SPI, CAN, Ethernet, etc.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of designing the PCB layout of electronic circuit boards and generate Gerber files for PCB fabrication.
• Responsible in research and define efficient and reliable architecture to fulfil electronic circuit board requirements for the company drone systems.
• In charge of firmware programming in embedded C/C++ language.
• In charge of testing PCB assemblies thoroughly and ensure they operate as expected.
• Responsible in sourcing suitable electronic components to implement the design architecture.
• In charge of studying datasheets of the electronic components and design the schematic of electronic circuit boards that can fulfil the requirements.
• Responsible in generateing documents and drawings of design and test.

Job Requirement:

• Minimum Degree in Mechanical/ Electrical/ Aerospace/ Mechatronics Engineering or relevant
• Minimum 3 years of working experience in electronic hardware and firmware design
• Experience in analog and digital circuit design with experience in designing electronic circuits with microcontrollers, digital signal processors (DSP), field programmable gate arrays (FPGAs), etc
• Proficient in schematic and PCB design tools such as Altium Designer, OrCAD Capture and PCB Designer, Autodesk EAGLE, etc and using instruments such as multimeters, oscilloscopes, logic analysers, etc. to troubleshoot issues on electronic circuit boards.
• Proficient in C/C++ programming language.
• Knowledge in various communication buses and protocols such as UART, I2C, SPI, CAN, Ethernet, etc.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of leading and directing projects and ensure they are directed towards a common objective
• Responsible for engaging and communicating with stakeholders to deliver project milestones and comply with strict deadlines
• In charge of ensuring client satisfaction and manage escalations, acting as single point of contact to the client
• In charge of ensuring that the project delivers as-sold solution, remains within the baseline budget and is delivered on time whilst maintaining quality criteria and client satisfaction
• Coordinate activities of the project teams through task delegation, resource assignment and programme management
• Take charge of proper documentation is in order
• Any other duties as assigned

Job Requirement:

• Minimum Diploma in Electronics & Communication Engineering or related field
• Minimum with 2 years’ relevant work experience in Security Industry
• Basic technical knowledge on ELV, Automation, Networking and Security Systems (CCTV, Card Access, Alarm System) will be an advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of designing the PCB layout of electronic circuit boards and generate Gerber files for PCB fabrication.
• Responsible in research and define efficient and reliable architecture to fulfil electronic circuit board requirements for the company drone systems.
• In charge of firmware programming in embedded C/C++ language.
• In charge of testing PCB assemblies thoroughly and ensure they operate as expected.
• Responsible in sourcing suitable electronic components to implement the design architecture.
• In charge of studying datasheets of the electronic components and design the schematic of electronic circuit boards that can fulfil the requirements.
• Responsible in generateing documents and drawings of design and test.

Job Requirement:

• Minimum Degree in Mechanical/ Electrical/ Aerospace/ Mechatronics Engineering or relevant
• Minimum 3 years of working experience in electronic hardware and firmware design
• Experience in analog and digital circuit design with experience in designing electronic circuits with microcontrollers, digital signal processors (DSP), field programmable gate arrays (FPGAs), etc
• Proficient in schematic and PCB design tools such as Altium Designer, OrCAD Capture and PCB Designer, Autodesk EAGLE, etc and using instruments such as multimeters, oscilloscopes, logic analysers, etc. to troubleshoot issues on electronic circuit boards.
• Proficient in C/C++ programming language.
• Knowledge in various communication buses and protocols such as UART, I2C, SPI, CAN, Ethernet, etc.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

• Select, use, and maintain service tools correctly to perform assigned tasks efficiently and safely.
• Install electrical components, including switches, sensors, transducers, transmitters, current transformers, alternator components, and control panels.
• Perform engine wiring installation in accordance with engineering drawings and specifications.
• Disassemble and assemble engine components, including oil pumps, water pumps, cylinder heads, and related parts.
• Carry out engine valve lash adjustments to ensure optimal engine performance.
• Assist in and perform mechanical installation works, including radiator assemblies, couplings, engines, alternators, gearboxes, piping systems, and hoses.
• Assist in and perform alignment works for radiator assemblies, engines, and alternator installations.
• Prepare generator sets for load testing activities.
• Conduct safety device testing and load testing, including recording and documenting all required operational parameters and test results.
• Connect and utilize Electronic Technician (ET) diagnostic tools to retrieve engine diagnostic codes, event logs, and operational data.
• Perform troubleshooting and fault diagnosis on engines and generators, identifying root causes and implementing corrective actions.
• Ensure all work is carried out in compliance with safety regulations, quality standards, and company procedures.

Requirements

• Possess an ITE or equivalent.
• Minimum 5 years of relevant hands-on experience.
• Electrical hands-on experience is a must.

To submit your application, please apply online to apply@rn-care.com or call +(65) tel: 6514 9838 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of leading and directing projects and ensure they are directed towards a common objective
• Responsible for engaging and communicating with stakeholders to deliver project milestones and comply with strict deadlines
• In charge of ensuring client satisfaction and manage escalations, acting as single point of contact to the client
• In charge of ensuring that the project delivers as-sold solution, remains within the baseline budget and is delivered on time whilst maintaining quality criteria and client satisfaction
• Coordinate activities of the project teams through task delegation, resource assignment and programme management
• Take charge of proper documentation is in order
• Any other duties as assigned

Job Requirement:

• Minimum Diploma in Electronics & Communication Engineering or related field
• Minimum with 2 years’ relevant work experience in Security Industry
• Basic technical knowledge on ELV, Automation, Networking and Security Systems (CCTV, Card Access, Alarm System) will be an advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

• Select, use, and maintain service tools correctly to perform assigned tasks efficiently and safely.
• Install electrical components, including switches, sensors, transducers, transmitters, current transformers, alternator components, and control panels.
• Perform engine wiring installation in accordance with engineering drawings and specifications.
• Disassemble and assemble engine components, including oil pumps, water pumps, cylinder heads, and related parts.
• Carry out engine valve lash adjustments to ensure optimal engine performance.
• Assist in and perform mechanical installation works, including radiator assemblies, couplings, engines, alternators, gearboxes, piping systems, and hoses.
• Assist in and perform alignment works for radiator assemblies, engines, and alternator installations.
• Prepare generator sets for load testing activities.
• Conduct safety device testing and load testing, including recording and documenting all required operational parameters and test results.
• Connect and utilize Electronic Technician (ET) diagnostic tools to retrieve engine diagnostic codes, event logs, and operational data.
• Perform troubleshooting and fault diagnosis on engines and generators, identifying root causes and implementing corrective actions.
• Ensure all work is carried out in compliance with safety regulations, quality standards, and company procedures.

Requirements

• Possess an ITE or equivalent.
• Minimum 5 years of relevant hands-on experience.
• Electrical hands-on experience is a must.

To submit your application, please apply online to apply@rn-care.com or call +(65) tel: 6514 9838 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

• Acts as the main technical advisor on construction sites, supervising staff, tools, and materials to ensure projects are completed safely, on time, and within budget.
• Interpret technical designs, set out site layouts, provide technical advice, and enforce safety regulations.
• Setting out, leveling, and surveying the site to establish building locations, grades, and elevations, ensuring all structural work follows design plans.
• Overseeing daily construction activities, managing subcontractors, and coordinating materials and labor to meet project goals.
• Providing technical solutions to site issues and conducting quality assurance inspections to ensure compliance with standards and regulations.
• Enforcing safety protocols, conducting safety audits, and ensuring compliance with Occupational Health and Safety (OHS) regulations.
• Maintaining accurate project documentation, such as site diaries, daily progress reports, and change orders.

Requirements:

• Min Degree in Civil Engineering or related field
• Min 3 years of relevant experience in geotechnical works and site supervision
• Experience in pipe jacking, tunnelling, or mining works preferred
• Knowledge of safety regulations and geotechnical construction standards

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

• Acts as the main technical advisor on construction sites, supervising staff, tools, and materials to ensure projects are completed safely, on time, and within budget.
• Interpret technical designs, set out site layouts, provide technical advice, and enforce safety regulations.
• Setting out, leveling, and surveying the site to establish building locations, grades, and elevations, ensuring all structural work follows design plans.
• Overseeing daily construction activities, managing subcontractors, and coordinating materials and labor to meet project goals.
• Providing technical solutions to site issues and conducting quality assurance inspections to ensure compliance with standards and regulations.
• Enforcing safety protocols, conducting safety audits, and ensuring compliance with Occupational Health and Safety (OHS) regulations.
• Maintaining accurate project documentation, such as site diaries, daily progress reports, and change orders.

Requirements:

• Min Degree in Civil Engineering or related field
• Min 3 years of relevant experience in geotechnical works and site supervision
• Experience in pipe jacking, tunnelling, or mining works preferred
• Knowledge of safety regulations and geotechnical construction standards

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

• Acts as the main technical advisor on construction sites, supervising staff, tools, and materials to ensure projects are completed safely, on time, and within budget.
• Interpret technical designs, set out site layouts, provide technical advice, and enforce safety regulations.
• Setting out, leveling, and surveying the site to establish building locations, grades, and elevations, ensuring all structural work follows design plans.
• Overseeing daily construction activities, managing subcontractors, and coordinating materials and labor to meet project goals.
• Providing technical solutions to site issues and conducting quality assurance inspections to ensure compliance with standards and regulations.
• Enforcing safety protocols, conducting safety audits, and ensuring compliance with Occupational Health and Safety (OHS) regulations.
• Maintaining accurate project documentation, such as site diaries, daily progress reports, and change orders.

Requirements:

• Min Degree in Civil Engineering or related field
• Min 3 years of relevant experience in geotechnical works and site supervision
• Experience in pipe jacking, tunnelling, or mining works preferred
• Knowledge of safety regulations and geotechnical construction standards

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of providingengineering support for product modifications, cost reductions, manufacturing process improvementsResponsible f
• In charge of leading and participating in design and development activities from concept to production with a well-defined Product Development Process.
• Responsible in driving successful development of new product development projects, research and develop ideas for new and improved designs of the components part
• In charge of generating design specifications, design proposals and/or product designs that meet customer requirements.
• Responsible in working with cross-functional team involved in new product development and manufacturing

Job Requirement:

• Minimum Degree in Mechanical/ Manufacturing/ Electronics Engineering or related field
• Minimum 2 years of working expereince in product design in components

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description

• Responsible in analyzing and troubleshooting customer issues via phone or email as well as on-site
• Taking charge of conducting product application testing for sales reps and customers.
• Responsible in conducting post sales application training to customers.
• In charge of receiving phone calls or emails from sales reps and customers and answering to the enquiries concerning product capabilities, specifications, and applications
• Responsible in creating and updating manuals for post sales application training for customers.
• Responsible to travel yo customer’s site for on-site support including setup, adjustment/ finetuning the system.
• In charge of assisting sales engineer with on-site presentations to customers when required
• Other duties or projects, as assigned

Requirements

• Minimum Diploma in Electrical / Electronic Engineering or equivalent
• Minimum 1 Years of working experience in industrial equipment industry
• Familiar with Logic control, Microsoft Excel skills, communication protocol (i.e Serial, Modbus TCP, Ethernet, EIP etc.) and HMI programming

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• Identify and manage projects and sales opportunities and develop new accounts to drive revenue growth with potential & existing customer.
• Prepare and deliver technical presentations explaining product or services to existing and prospective customers.
• Understand customers’ needs and competitors in order to develop strategy to win sales.
• Liaise and work closely with sales support staff/application engineer.
• Provide sales and first-level technical support to all customers’ enquiries, deliveries and issues or feedback.
• Product selection and generate quotations based on RFQ.
• Project sales management and submission of Sales Report.

Job Requirements:

• Min Diploma in Engineering (Mechanical) or equivalent.
• Min 1 years of working experience in the related field is required.
• Possess Class 3 Driving License.

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.

EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in Supplier Quality/ Audit
• Oversea travelling is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900