Total 76 process development engineer job vacancies in The Philippines

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

• Assist Management Representative and collaborate with committee members to establish, implement, effectively maintain and continually improve Energy Management System (EnMS)
• Coordinate and guide the Energy committee on technical discussion in meeting
• Assist the Energy committee in developing measurement plans, identifying potential efficiency improvement projects, establishing criteria and method to ensure operation and control of the EnMS are effective
• Ensure action plans to continually improve energy performance is implemented
• Report performance of EnMS and energy efficiency performance to top management or management representative at determined intervals
• Perform the role as a Waste Disposal Coordinator in advising executives on the design of work and manufacturing processes to avoid waste and specifying rules on the separation and labelling of waste, including collection, delivery, storage, and in-company transportation.
• Promote the participation and consultation of workers to support Energy and Environmental related programs and awareness campaign
• Ensure conformance to EnMS, Wastes Management, and LEV requirements and compliance to local regulations
• Assume responsibilities as per Energy Efficiency and Conservation Act (EECA) 2024
• Ensure Energy, Wastes and LEV related documentation is accessible and well maintained
• Involve in ISO 9001, ISO 14001, TS16949, ISO50001 and other audits inclusive of government and customer audits. Ensure all OPL’s related to this audit is closed on a timely manner.
• To work closely with Site Safety Officer (HSE) and DH in ensuring safe work practice is always practiced in Bosch.
• Participate and contribute in Cluster Service Team (CST) and Regional Service Team (RST) activities.
• Responsible to propose and conduct continuous improvement plan for job scope related system
• Responsible to work closely with respective departments to resolve all FCM Energy and Environment related issues. Support and work towards achieving the departmental goal.
• To attended and complete to any other duties assigned by the immediate Superior

• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:-
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure log, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.
• Assist Manufacturing in troubleshooting manufacturing related problems.
• Provide post-production support.

• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:-
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure log, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.
• Assist Manufacturing in troubleshooting manufacturing related problems.
• Provide post-production support.

• Responsible for new product quality requirement, PQE function.
• Ensure products manufactured meet Customer requirements. 
• Responsible for Line process control and complaint management. Follow rule : 1-2-14 1.4.
• Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
• Ensure closed loop of internal and external audit finding include product safety audit.
• Monitor and supervise QMM technician performance to ensure efficiency in quality management process.
• Responsible for process improvement project and update Management on the improvement result.
• Responsible for Quality problem resolution through problem solving sheet PSS/8D.
• Responsible for inspection plan for incoming and outgoing (FQ, VQ).
• Responsible for component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities without delay.
• Monitor, report of KPI’s in timely manner and establish action plan.

New Product Introduction

• Responsibility for –Start up projects, warranty, customer complaint, first article approval (ISIR), reliability testing, etc.
• New project product qualification test include fulfill the regulation requirement.
• Actively involves in UX, QG, FMEA, PQP and production line release. Ensure all the QG open point closed within defined due date or latest 3 months after SOP.
• Prepare product test plan, product inspection plan (EP), QZ test plan (QZTI) and FQ/VQ checklist.
• Provide training to QMM test technician on all the related inspection plan and checklist.
• Work with service center to understand the product quality level in the market, at least monthly reporting is expected.
• Coordinate project testing, investigate the failure and ensure close loop of the action implemented. Follow rule of PSS/8D 1-2-14.
• Responsible for part release.
• Ensure all ISIR requirements are fulfill before ISIR released i.e. Cpk > 1.33, PQA sign off, control plan and released critical components supplier qualification process.
• To ensure measurement methodology alignment between PgP2 and supplier during technical discussion with supplier via PQA.
• To ensure all related fixture including incoming inspection, short endurance for VQ/FQ audit, practical tests are ready 2 weeks before pilot.

Operation Support

• Responsible for in process & outgoing product quality performance.
• Responsible for MSA, calibration, concession management, customer complaint management, etc.
• Provide assistance to resolve line FOR issues.
• Support PUQ on supplier incoming material quality issue disposition and 8D verification and evaluation.
• Support cost saving activities and approve alteration change.
• Regular review with production personnel for PQP and FMEA.
• Perform failure analysis on customer – warranty complaint tool and drive for improvement to achieve the agreed target. Target to roll out improvement actions within 3 months after solution is defined.
• Ensure ANDI/CR contents is checked before release and implemented correctly.
• Conduct periodic audits to ensure line and process compliances. Expected monthly audit reporting is needed to submit to supervisor and include action plan of manufacturing.
• Conduct Failure Investigation with cross-functional team eg. ENG, PUQ, MSE for non conformance incidents if needed.
• Drive cross functional team for Quality process improvement (e.g. Elimination of inspection, warranty limit).
• Responsible for plant to plant quality complaint management.
• Responsible for product transfer on quality measures between plant.
• Responsible for monthly Product CIP, Process CIP, warranty analysis reporting.

1. Planning of assembly processes flow considering manufacturing efficiency. Collaborate
with project team to seek and strive for minimizing product cost through design and
process optimization.
2. Support in the RFQ calculation; calculate and provide investment needed for standard
assembly process modules.
3. Define equipment specification in accordance to product specification. Plan, purchase
(with supervision), setup and release manufacturing cells on time, at budget and with
desired requirement.
4. Involve in each project stages to evaluate equipment and process performance.
Formulate technical and/or performance reports by collecting, analyzing and
summarizing information and trends.
5. Identify and establish process specifications, maintenance strategies and other
manufacturing documents required for line release activity.
6. Conduct problem solving methodology in assembly processes and equipment. In
meantime also developing troubleshooting guide and training of technical know-how to
technician.
7. Actively participate in system CIP on value disposition as in S-Q-C-D (Safety, Quality,
Cost & Delivery).
8. Provide effective countermeasure in technical flaw encompassed with corrective and
preventive action plan.
9. Study, evaluate and improve the technical capacity and capability in assembly
processes accorded to customer’s demand.
10. Continuously strive for higher and sustainable OEE, FPY, MTTR, MTBF.
11. Emphasize the intensity of team work culture in VSO (Value Stream Organization)
moving towards operational excellence.
12. Any other duties assigned by immediate superior from time to time.

• As a subject matter expert, you will consistently work to improve our suppliers' performance and the quality of our products.
• Supplier Auditing: Own the auditing process across all supplier management phases, including potential analysis, Cooperate Social Responsibility audits, initial sample process audits and comprehensive process audits.
• Supplier Development: Lead and support supplier quality and cost improvement activities. Conduct workshops, trainings, and regular follow-up visits to enhance supplier capabilities and performance in line with Bosch's requirements.
• Problem Solving: Intervene in critical supplier quality issues. You will take the lead onsite when our global plants require local support or when progress is stalled. Your role is to expertly coach the suppliers to master and apply structured problem-solving tools (e.g., 8D, 5-Why, Ishikawa) to ensure root causes are identified and holistically eliminated.
• Supplier Escalation Management: Manage supplier escalations that require higher management involvement, including the implementation and execution of dedicated quality measures, through to successful de-escalation.

• Responsible as the line/process quality for the Sensors and ASICs production line. Ensure the line/process is complied with quality requirements. Interfacing with Process/ Equipment Engineer.
• Responsible for the product quality for Sensors and ASICs, internally and externally, including incoming product quality issues and customer issues. Interfacing with Product Engineer, Simultaneous Engineering (SE) Team, Central Customer Quality Engineer and/or Central Supplier Quality Engineer.
• Responsible to key in report, generate quality notification in SAP such as Q-Info, Delivery Release and QM-View.
• Responsible for the problem-solving coordination and moderation for the quality issue internally and externally as Problem Solving Expert.
• Responsible as the SPC coordinator for the Sensors and ASICs line.
• Support as PgP5 Internal Auditor, including audit execution, closing and effectiveness verification of audits focus on IATF 16949 and VDA 6.3.
• Support any external/customer audits, including follow-up and closing of related OPL.
• Support department 6S activity.
• Support change management 4M checklist verification.
• Support lessons learned activity. Sharing input to the lesson learned plant coordinator. 
• Support MSA study, including review of MSA study reported by Process/Equipment Engineer.
• Support Daily Leadership Meeting for any quality issue regarding Sensors and ASICs line.
• Responsible for return materials to supplier, including the improvement of the return process.
• Responsible for IB process for return material from customers.
• Responsible for continuous improvement in the area of responsibility.
• Execute any other related duties assigned by supervisor from time to time.

• Develop embedded firmware which run on Bosch products.
• The developed embedded firmware shall base on test requirement from customer, internal engineering and manufacturing.
• The embedded firmware shall be able to interact with manufacturing and engineering test system via physical interface such as Serial, Ethernet, and USB
• Work closely with embedded firmware team in Malaysia and Germany in order to achieve common product development goal.
• Assist global engineering team to perform HW-SW integration bring up during development phases.
• Assist global manufacturing sites in troubleshooting manufacturing related problems.
• Provide postproduction and failure analysis support.
• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary, develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure logs, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.

• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:-
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure log, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.
• Assist Manufacturing in troubleshooting manufacturing related problems.
• Provide post-production support.

• Responsible in SMT paste printing and glue process to develop, optimize processes for new product introduction/ development and sustaining product engineering activities based on proper studies (e.g. Design of Experiment, risk assessment, equipment & process capability).
• Generate and maintain the standardized work documents.
• Ensure that the respective area workstation and system are well maintained in operation condition.
• Define equipment preventive maintenance plan in close collaboration with maintenance team. Provide training on machine maintenance, operation and processes when necessary.
• To assist in major machine breakdown troubleshooting.
• To participate in new product development discussion and contributes ideas and comments for PCB assembly and process technology.
• To participate, setup and review traceability for respective area and improve timely.
• To be the Data Owner of the processes under care and set-up of a proper Data Management for Data Visualization and Analytics.
• Responsible for process & yield improvement, cost reduction and cycle time reduction. Apply statistical method, systematically problem-solving tools (e.g. fault tree analysis, 3x5xwhy, DOE, 6- Sigma, Kepner Tregoe) or management tool (e.g. System CIP) to get desired results.
• To work closely with CoC (Centre of Competence) team to comply, standardize and improve processes via PFMEA and VVts/DMDs.
• Conduct equipment capability studies and evaluate processes. If needed, prepare ROI analysis and arrange supporting purchases.
• To achieve the department goal through continuous process improvement activities.
• Provide support in process and line audits, technical advice request from project team.
• Product engineer for the model assigned
• Any other assigned by immediate supervisor from time to time.

• To formulate maintenance plan for new equipment and machines based on inputs from station owners and suppliers.
• Perform troubleshooting based on troubleshooting guide from station owners and study on eliminating the problem from repeating.
• Liaise with station owners and machine suppliers on continuous improvement.
• To train, coach and develop technicians to handle test stations effectively in the area of troubleshooting and sustaining.
• To manage and ensure all manufacturing documents related to maintenance are being prepared and uploaded accordingly and promptly before release for manufacturing operations.
• To optimize and improve equipment reliability and design.
• To execute related activities to meet key performance indicators of department goals and drive for continuous improvement with realistic goal setting together with the team.
• To evaluate Test Technicians performance according to department and individual goals
• To summarize breakdown report and feedback to line support team for improvement (MTTR and MTBF).
• To execute any other related duties assigned by immediate superior from time to time.

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

Job Summary
1. Role
1.1 Q-Support to PPU in Production Part Approval Process (PPAP) and Preventive Quality Planning (PQP) as part of TTM process.
1.2 Main interface of rBU all supplier quality related issues after SOP (e.g. ECR, 8D, concessions, defect cost reimbursement, and etc).
1.3 First escalation level for the Plant for purchased parts quality issues.
1.4 Support achievement of Cost targets for related Product Group along the entire Product Life Cycle.

2. Job Scope
2.1 Purchasing Quality responsibility and accountability for the responsible Product Group within the rBU along the product life cycle.
2.2 PQP (Preventive Quality Planning) for purchased parts; Operative handling of initial samples / ISIR release.
2.3 Complaint management.
2.4 Blocked stock handling & Concession handling.
2.5 Represent Purchasing in Plant Point-CIP activities.
2.6 Measure supplier Quality Performance: Plant / rBU specific KPIs.
2.7 Operative handling of quality cost reimbursement.
2.8 Trigger escalation of supplier (as input of Q-escalation process).
2.9 Support all the relevant quality projects in rBU project team.
2.10 RPP / Tooling (incl. tooling transfer): Tech. Discussion, measurement harmonization, Process audit, Test & qualification-check, Product Certifications.
 

Test Planning & Execution

• Plan, coordinate, and execute testing activities according to approved test plans and procedures.
• Ensure testing is conducted accurately, consistently, and in compliance with defined standards.
• Monitor test progress and ensure timely completion of testing activities.
• Review test results with Product Quality Engineers and approve test reports in accordance with quality requirements.
• Support root cause analysis and follow up on corrective actions until closure.

Test Lab Management & Operations

• Responsible for overall test laboratory operations including capacity planning and workload balancing.
• Ensure optimal utilization of test equipment, materials, and resources.
• Manage inventory control for testing materials and consumables.

Equipment Maintenance & 7S

• Ensure all testing equipment is properly maintained in good working condition.
• Maintain safe and organized lab environment.

Training & Competency Development

• Ensure all test technicians and workers are properly trained before performing any testing activities.

Knowledge and Exposure

• Data analysis and reliability testing
• Failure analysis and problem-solving methodology
• Good in 7S.

Behavioral Competencies

• Drive achievement and excellence.
• Independent, initiative and proactive.
• Able to work with peers and functional team.
• Able to lead and guide a group of technicians.