Total 907 qc engineer job vacancies in Quality Assurance / Control category in The Philippines

Job Summary

Responsible for developing, executing, and optimizing test processes to verify product functionality and quality. Involves test setup, data analysis, failure analysis, and documentation to support process improvement and production efficiency

Key Responsibilities

• Investigate yield, quality, issues and implement improvements.
• Develop, optimize, and control manufacturing processes.
• Drive process improvements, defect reduction, and implement corrective actions
• Support test process documentation, and continuous improvement initiatives.
• Support production testing, analyze test data, identify failures, and implement corrective actions.
• Execute, and improve test procedures and systems.

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Maintain, improve, and develop QA/QC program as defined in the Company’s Quality Policy standard and control plan.
• Developing and implementing quality control systems, policies, procedures, specifications, forms, checklists, reports, etc., for services, incoming material, and factory assembly, testing and shipping.
• Lead on Quality incident 8D. Investigate quality problems by reviewing quality trends, tracking the root cause(s) of the problem(s), coordinating corrective actions, and implanting appropriate adjustments. Resolve inquires to satisfaction in a professional, timely manner, responding verbally and/or in writing.
• Implement preventive actions to reduce and/or prevent quality problems.
• Performs internal audits of the operation process using inspection results and statistical techniques to provide timely, accurate process and product analysis.
• Analysis audit results and determines proper corrective and preventive action.
• Defines and conducts both systematic/methodical and random/arbitrary tests to ensure proper Quality performance of products.
• Collaborating with operations and engineering team to develop and implement controls and improvements.
• Monitoring and analysing quality performance.
• New product capability, capacity set up, upgrade, troubleshooting and automation.
• Handle virtual factory synchronization standardization, harmonize best practice.
• Work with warehouse personnel to maintain incoming material and finish goods storage according to customer requirements with proper traceability.
• Develops and implements strategies to increase process quality performance through statistical methods and IR 4.0.

As a QA Engineer you will be supporting the development teams by ensuring the quality of their output through a combination of manual and automated testing.

Who we are

Trade Nation is a global CFD and spread betting broker. We help traders make better decisions through clear market insights, transparent pricing and fairer approach to trading.

Since 2014, we’ve grown into a market-leading, low-cost broker with our headquarters in London and offices across Europe, South Africa, Asia-Pacific, and key offshore regions including the Caribbean and Indian Ocean. Our platform is available in 14 languages, making it accessible to traders worldwide.

Built on transparency and trust, and driven by our people, our focus is simple: helping customers trade more effectively. We do that by keeping costs low, cutting unnecessary complexity and using technology to put traders first.

Your team

Our Kuala Lumpur office is a bright, modern space located at the heart of the city. The team here is expanding, making it our second-largest hub, and we’re excited to welcome like-minded individuals to join an exciting, collaborative environment filled with professionals who have a passion for innovation and driving change.

Our commitments to each other

We have each other’s backs

There when we need each other most

 We challenge each other

Be more creative, more curious, more bold

We thrive together

Taking our work to the next level

We form strong bonds

Through team building and social events

We don’t judge

Instead, we teach and are open to learning

We step up

Taking ownership and supporting each other to do the same

Key Responsibilities:

• Collaborating with cross functional teams to understand product features and architecture.
• Deriving meaningful test scenarios based on business requirements and system workflows.
• Performing functional, regression, integration and end-to-end testing on tasks and epics.
• Developing and maintaining an up-to-date regression pack to ensure ongoing testing of critical functionalities.
• Writing, executing, and maintaining test cases for automation.
• Assisting in bug reproduction, investigation and work with developers on root cause analysis.
• Maintaining test scripts to run in CI/CD environment.
• Promoting delivery of quality software.
• Communicating effectively on progress and ensure impediments are raised early to minimise impact on the delivery.

• Proven experience in quality assurance across automated and manual testing within software development with at least 3+ years of experience.
• Should have 2+ years’ experience in front-end, API and end-to-end testing.
• Develop and maintain automated scripts using tools like Playwright, Cypress, K6 and Postman.
• Strong preference for experience in scripting language such as TypeScript, JavaScript.
• Skilled in using CI/CD tooling such as GitLab, TeamCity etc
• Experience using Jira or similar project management tool.
• Maintain and enhance test documentation including test scenarios and bug reports.
• Excellent attention to detail, highly organised with a proactive and independent approach.
• Capable of working on multiple tasks simultaneously and managing deadlines.

Preferred Qualifications

• Relevant testing qualifications such as ISTQB, Agile software testing courses.
• Experience with Playwright using Typescript language.
• Experience in API testing using Postman or similar tools.
• Good to have knowledge in C#
• A positive attitude with the ability to work independently and as part of a team.
• Knowledge of Agile methodologies and experience working in an agile environment.

Lead the Quality Assurance process to ensure the achievement of quality compliances and customer satisfaction. Provide Quality Assurance support and coordinate in resolving potential issues.

Key Responsibilities

• Facilitate Customer Quality Issues and Internal Quality issues to drive Corrective & Preventive Actions.
• Facilitate Quality Planning Process [PFMEA, Control Plan, Measurement System Analysis, Quality Gate] for new process setup.
• Monitor Quality KPIs and coordinate Continuous Improvement activities.
• Analyze, compile, review Quality Metrics, and timely communication to stakeholders.
• Perform Quality Audits to ensure compliances, process effectiveness, and elimination of Quality Risks.
• Coordinate Change Control, RMA, SPC implementation and Quality Training activities 

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.
4. To support line for trouble shooting in test system.
5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

• Setup new product & improve test strategies for existing products, to perform program test time reduction for capacity improvement & test yield improvement in production.
• Support ME and QA team on analyze customer failure samples & provide countermeasure program for detect future similar failure slip through to customer.
• Provide training to technician group for smoothening daily repairing work.
• Troubleshooting test board/ tester if IC failure occur & provide permanent countermeasure.
• Ensure test station operation, performance, stability & robustness. Develop plans to investigate root cause of deviations.

Roles & Responsibilities

The incumbent is responsible for supervising/performing the steel works inspections on site as a third party in accordance with projects / consultant specifications with reference to International standards to support the achievement of the sales targets.

Job Description:

Inspection Preparation Works

Plan the inspection jobs for the assigned project as per approved Inspection Test plans (ITP):

Perform reviewing activities to ensure meeting the project requirements:

Inspection Works on Site

Carry out the assigned inspection jobs as per client requirements:

Resolve any inspection issues:

Completion of Inspection Reports

Prepare inspection reports for submission to client:

Submit inspection reports/certification for review and billing process:

Supporting Duties

Prepare for new tests / certification as per organisation requirement

Prepare /Update the calibration records and internal procedures for audits

Recommend relevant testing services to clients

Coach and guide staff on the job

Job Requirement:

Diploma/Degree in Engineering

2 years experience in Building Structural Steel works inspection

Experience in Oil & Gas shutdown projects

Able to do punch list and Piping inspection

2 years in construction/marine construction and oil & gas.

Certified with AWS CWI/SCWI or CSWIP 3.1/ 3.2 - WI

Duties and Responsibilities:

·       Photocopy and distribute documents as necessary

·       Locate and extract file information as requested

·       Maintain various internal records and produce reports summarizing data as required from time to

time

·       Enter file data onto a computer and other storage media as necessary

·       Maintain an indexing and cross-referencing system

·       Maintain daily usage of QC department gloves, finger cots, hair nets & face masks

·       Maintain inventory of QC cleanroom smocks and shoes

·       Maintain inventory of QC forms, labels & stickers

·       Assist QC Supervisor on smock & shoes cleaning schedule

·       Perform any other related duties assigned by your immediate supervisor

Minimum Job Requirements:  

·        Secondary education or equivalent

·       PC Literacy (Word / Excel / Power point / Internet /Others)

Working Hours:

Monday to Friday: 8:00 AM – 5:30 PM

Rest Days: 8 days per month

Job Description:

The company is a Singapore-based manufacturer and trader specializing in plastic packaging materials for the electronics and semiconductor industry (e.g. carrier tapes and vacuum reels)

Responsible for inspecting raw materials, identifying defects, and ensuring products meet company and regulatory standards

Perform other duties as assigned

Requirements:

Minimum 2 years of relevant experience

Able to stand for long periods

Responsible, hardworking, and able to follow instructions

Benefits:

Clean and air-conditioned working environment

Annual leave and medical leave after probation

Additional Information:

Applicants commuting by motorcycle between Malaysia and Singapore are welcome

Company shuttle bus provided at designated pick-up points

Work Location:

Woodlands MRT Station (NS9, North-South Line)

LEE LAI MUN 

R1657696

QC Executive 

Location: Boon Lay

5 Days Monday to Friday - 9am to 6pm

$3000 to $3800 

Requirements

Diploma or Degree in Food Science, Food Technology, Quality Assurance or related field.

Minimum 2-3 years of working experience in F&B manufacturing, preferably in seafood processing.

Familiar with Food Safety Management Systems (e.g. HACCP, ISO 22000, BRC, GMP) is an advantage.

Willing to travel overseas for supplier visits or audits.

Job scope

Prepare, maintain and update technical documents related to salmon/seafood raw material processing and finished products.

Maintain documentation and records for Food Safety & Quality Management System (FSQMS), including SOPs, work instructions and quality records.

Monitor and ensure compliance with food safety standards, regulatory requirements and company quality policies.

Conduct quality checks and inspections for incoming raw materials, processing stages and finished goods.

Investigate customer complaints and quality issues, perform root cause analysis and follow up with corrective and preventive actions.

Work closely with production, warehouse and purchasing teams to ensure quality requirements are met.

Assist in internal audits, external audits and regulatory inspections.

Prepare quality reports and support continuous improvement initiatives in the factory.

Participate in overseas supplier visits or audits when required.

Interested applicants kindly submit your resume through here and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Tan Yu Jing Reg No: R26161199

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Key Responsibilities

1.     To ensure that all manufactured products conform with specified standards before products are released / sold to customers.

2.     To supervise and ensure smooth QC routine raw material &work-in-progress testing.

3.    Issuing COA, COC or any other documentations upon customer's request.

4.    Collecting data and study trend analysis for improving current product application performance.

5.    Participate in assessing and qualifying new raw materials for potential use.

6.     Work with procurement to ensure that raw materials purchased are within specifications.

7.     Maintain and manage retention samples keeping &disposal.

8.     Investigate customer’s complaint, correction actions and preventive actions taken are documented.

9.     Proper isolation and disposition of non-conformance materials and products.

10. Involves in product development initiatives, lab trial sample preparation, performs formulation adjustments, conducts stability monitoring and maintain proper record and documentation.

11.  To assist the Company’s Workplace Safety and Health committee.

12.  Compile and analyze customer’s complaints to establish trends and alert Management / Sales Customer Service / Production / Procurement for concerted effort to pre-empt and eradicate issues.

13. Knowledge of ISO management systems and experience with Halal certification applications or renewals would be an advantage.

14.  Prepare technical reports for management information.

Other Duties:

The duties listed are not exhaustive and may be varied from time to time as dictated by the changing needs of the organisation.

The post holder will be expected to undertake other duties as appropriate and as requested by his/her manager.

Location: 15 Joo Koon Circle, pick up points at MRT stations (Boon Lay, Pioneer, Choa Chu Kang, Jurong East, Woodlands)

Benefits:

• Transport allowance: $240/month
• Shift Allowance: $24/night or $10/day
• Shift Premium: $200/month
• Annual Wage Supplement (AWS) of 1-month basic salary
• Variable Bonus

Responsibilities:

• Perform auxiliary / component incoming inspection per procedure.
• Perform mold-line in-process inspection per procedure.
• Perform semi-finish / finished goods inspection (visual / dimensional / document review) per procedure.
• Participate in product characteristics trend monitoring and effective escalation and follow-ups.
• Ensure all inspection activities are accurate and adequately documented (e.g. SAP system, Ms. Office, etc.)
• Exercise appropriate control to documentation records and retained samples.
• Ensure all related calibration activities are timely and appropriately performed.
• Support non-routine assignments initiated by supervisors (e.g. Handle customer complaint, Mold-monitoring activities, etc.)
• Other duties as assigned by superior.

Education and Experience:

• Able to work rotating shift - 7 to 7.15
• Academic qualification preferably Nitec or Higher Nitec in Engineering or relevant fields, and/or equivalent qualification
• Computer literate (e.g. Ms. Office skills).
• Good communication & teamwork skills.
• Self-motivated and positive thinking.
• Added advantage with cGMP and ISO working experience.
• Preferably with exposure to medical device, pharmaceutical or related manufacturing environment.

Are you a recent graduate passionate about electronics, testing, and problem-solving? We are looking for enthusiastic individuals to:

• Set up new products and enhance test strategies for existing products to improve test efficiency, yield, and production capacity.
• Support our QA team by analyzing customer failure samples and developing programs to prevent similar issues in the future.
• Train and guide technicians to streamline daily repair operations.
• Troubleshoot test boards and testers when IC failures occur, and implement permanent solutions.
• Ensure smooth operation of test stations by monitoring performance, stability, and robustness, and investigating any deviations.
• Gain hands-on experience with ATE tester platforms such as Teradyne ETS-800, Advantest T2000, T3347, Fusion-CX, and LTX.