Total 1,010 qa engineer job vacancies in Quality Assurance / Control category in The Philippines

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 5 years of experience in QMS, AS9100, NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Responsibilities

Quality Assurance & Control:

• Establish, implement, and maintain quality control plans for manufacturing processes and products.

• Ensure compliance with quality management systems (e.g. ISO 9001, AS9100, ISO 13485, or equivalent).

• Monitor product quality through inspections, audits, SPC, and process capability studies.

• Review and approve inspection plans, control plans, work instructions, and quality procedures.

• Lead root cause analysis and corrective/preventive actions (CAPA) using structured problem-solving methodologies.

• Quality Lead for customer audits/visits, working with respective Production/Engineering Team to get all the documents and production shop floor ready for the audits.

• Interpret technical drawing and analyze CMM inspection reports.

• Perform measuring on critical dimensions of the parts by CMM, micrometer, vernier caliper, gauges, smart scope, roundness tester, microscopes etc.

• Use of the Departmental Quality Systems, Smart QC, High QA and NCR module to perform day-to-day duties.

• Generate Inspection Plans for Incoming, In-process and Outgoing Inspections.

• Generate Work Instructions for inspection-related processes.

• Perform First Article Inspection report and buyoff with the customers.

• Perform Source Inspection with the customers as requested.
  
  

Process & Continuous Improvement:

• Drive continuous improvement using Lean, Six Sigma, Kaizen, and other quality tools.

• Analyze manufacturing data to identify trends, risks, and opportunities for quality improvement.

• Support process optimization to reduce defects, scrap, rework, and customer complaints.

• Participate in failure mode and effects analysis (FMEA) for new and existing processes.

• Responsible for scheduled maintenance and calibration of measuring equipment, jig and fixtures.

New Product Introduction (NPI)/Engineering Support:

• Support new product launches by ensuring quality standards are defined and met.

• Participate in design reviews and ensure design-for-quality and manufacturability principles are applied.

• Validate process changes and engineering updates to ensure compliance with quality requirements.

• Generate Process Control Plan and FMEA with Engineering Team.

• Responsible for maintaining Non-conforming Product Control (Reject Material Report) procedure.  Analyze and review Reject Material Report (RMR) with Engineering/Production when non-conformance found. Work with Engineering/Production to resolve on any of the non-conformance found.
  
  

Audits & Compliance:

• Plan and conduct internal audits and support external audits from customers, certification bodies, and regulatory agencies.

• Ensure timely closure of audit findings and non-conformances.

• Maintain documentation and records in accordance with quality standards and company policies.

Position Requirements

Education Requirements: Minimum Diploma in Mechanical Engineering or related field

Experience Level Requirements: 3 years of QC/QA experience in Precision Engineering, manufacturing environment will be preferred

Skills Desired:

• Strong knowledge of manufacturing processes and quality methodologies.

• Proven experience in a regulated or high-volume manufacturing environment.

• Demonstrated track record in driving quality improvements and resolving complex quality issues.

• Knowledge in Statistical Process Control (SPC) techniques such as Gage R&R, CPK, DOE will be advantageous.

• Familiarity with statistical analysis and quality software tools.

• Ability to interpret engineering drawings, specifications, and technical standards.

• Strong analytical and problem-solving capabilities.

• Excellent communication and stakeholder management skills.

• Ability to work independently and manage multiple priorities effectively.

• High attention to detail with a process-oriented mindset.

- Obtain immediate containment, root cause and corrective action(s) on defects discovered at incoming inspection / manufacturing floor.

- Work closely with Buyers and Vendors to close out defect cases

- Drive internal corrective action with immediate disposition for defects deemed responsibility.

- Drive continuous improvement throughout supply base to meet quality and corporate goals.

- Perform supplier assessments and audits as required by audit plans.

- Guide new vendors and enforcing requirements to meet world class Quality standards

- Provide presentation materials for the following meetings: Board of Directors, Quality, Supplier and Manufacturing.

- Hold Quality Performance Review with vendors

- Make MRB decisions and drive immediate actions by working with responsible engineers.

- Responsible for measuring and hiting all inspection metrics including incoming defect rate,

ship to stock rate, inspection backlog and SCAR metrics.

- Responsible for Quality performance to Goals 5S/Safety requirements.

- Responsible for departmental compliance to division’s ISO9000 Quality System and all associated procedures, including engineering drawings, assembly and test procedures, etc.

- Responsible for the assessment, development and execution of inspection schedules in accordance with company requirements

- Manage safety reporting for the department.

- Well versed in inspection techniques in order to perform first article inspections and production validation of piece part components and assemblies during source inspection

- Familiar with inspection equipment from vernier to complex CMM layout inspection to perform source inspection at vendor’s site where necessary

- Electrical / electromechanical experience preferred

- Experience in driving quality improvement for mechanical commodities such as machining, sheet metal, frames or consumables

- Experience in driving quality improvement for electrical commodities such as PCBA, box build, cable & harness

- Able to interpret complex mechanical & electrical drawings and geometric tolerancing

Interested candidates, please email your resume to annasee@recruitexpress.com.sg

Anna See Sing Yee

CEI Reg R25157535

Recruit Express Pte Ltd

EA License No: 99C4599

We regret that only shortlisted candidates will be contacted

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Mechanical / Precision Engineering or relevant
• Min 5 years of experience in Oil & Gas industry with experience in Supplier Quality
• Oversea travelling is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Oversea travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• Responsible for performing job inspection at first piece, in process and final inspection per the Job Instructions Sheet plans.
• Responsible for performing First Article Inspection (FAI).
• Responsible for performing dimensional inspection using a variety of inspection gages & equipment.
• Taking care of initiate Quality Notification (QN) for non-conformance when products are not meeting Quality and Engineering requirement.
• Responsible for performing proper use and maintenance of gages and inspection equipment.
• Responsible for performing proper documentation including inspection stamping of quality paperwork.
• Maintain and improve 5S standards on workstations and responsible areas.

Job Requirements:

• Min Nitec in Precision/Mechanical Engineering or higher.
• Min 2 Years of experience in quality control with experience in CMM

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Overview
We are looking for a Technical Test Engineer (Interfaces) to support testing activities for a large-scale financial payment platform initiative. The role focuses on validating system integrations and interfaces, ensuring that application behaviour aligns with technical and functional requirements.
The successful candidate will be responsible for designing and executing test cases, performing integration and system testing, and supporting defect management throughout the testing lifecycle.
Responsibilities

• Design, develop, and execute comprehensive test cases and test scenarios based on both technical and functional specifications.
• Conduct integration testing and system testing to validate application behaviour against defined change requirements.
• Perform manual testing activities, including exploratory testing and participation in user acceptance testing when required.
• Identify, document, and track defects through to resolution, ensuring proper communication and collaboration with development teams.
• Work closely with test automation engineers to identify test cases suitable for automation and improve overall testing efficiency.
• Understand and execute business scenarios and test cases to validate system functionality and integration workflows.
• Support overall testing lifecycle activities, including test preparation, execution, defect management, and reporting.

Requirements

• Bachelor’s Degree in Computer Science, Information Technology, Software Engineering, or a related field.
• Minimum 5 years of experience in software testing, quality assurance, or system testing.
• Experience in integration testing and interface testing, particularly for complex systems or platforms.
• Good understanding of software testing methodologies, defect lifecycle management, and testing best practices.
• Experience with test management and defect tracking tools (e.g., JIRA, TestRail, HP ALM, or similar).
• Familiarity with API testing, interface validation, or message-based integrations is good to have.
• Excellent analytical and problem-solving skills with high attention to detail.
• Ability to collaborate effectively with developers, automation engineers, and business stakeholders.

gem.cabria@manpower.com.sg (R1434374), stating the position as the subject title in the email.

Jireli Gem Mejia Cabria | EA License No. 02C3423 | Personnel Registration No. R1434374

Please note that your response to this advertisement and communications with us pursuant to this advertisement will constitute informed consent to the collection, use and/or disclosure of personal data by ManpowerGroup Singapore for the purpose of carrying out its business, in compliance with the relevant provisions of the Personal Data Protection Act 2012. To learn more about ManpowerGroup's Global Privacy Policy, please visit https://www.manpower.com.sg/privacy-policy

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Extensive travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• Responsible for developing, testing, and improving premium connections and OCTG products during the development phase, ensuring they meet rigorous industry standards.
• Coordinating with customers and providing technical advice/training on the range of OCTG products, often involving rig field services.
• Executing validation tests (often in specialized, high-pressure, or high-temperature environments) to verify the integrity and performance of new designs.
• Planning, managing, and documenting test results for internal and client review.

Requirements:

• Min Diploma in Mechanical/ Manufacturing/ Precision Engineering, or equivalent.
• Minimum 3 years of experience in Oil and Gas, specifically with OCTG and downhole tools.
• Knowledge of ISO/API standards related to OCTG and connections. 

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Please note that this is a yearly renewable contract position.

Engineer's Responsibilities

• Process Monitoring: Ensure manufacturing processes comply with defined SOPs, work instructions, and quality standards.
• In-Process Inspections: Conduct routine inspections at critical points in production to detect defects early.
• Defect Prevention: Identify potential quality issues and implement preventive measures to reduce defect occurence.
• Data Recording & Reporting: Document inspection results, process deviations, and defect trends accurately.
• Collaboration: Work closely with production teams, line leaders, and engineers to resolve quality issues promptly.
• Corrective & Prevention Actions (CAPA): Assist in root cause analysis and verify the effectiveness of corrective actions.
• Compliance & Audits: Ensure adherence to company quality standards and support internal/external audits.
• Continuous Improvement: Recommend process improvements to enhance product quality and process effciency.

Requirements:

• Understanding of manufacturing and assembly processes.
• Ability to read and interpret engineering drawings, BOMs, and work instructions.
• Strong analytical and problem-solving skills.
• Attention to details and consistency in inspection practices.
• Good communication and teamwork skills.