Total 1,066 construction quality control job vacancies in Quality Assurance / Control category in The Philippines

Quality Engineer will be responsible for investigation, identification, and resolution of issues within design, specification, installation, commissioning, handover, service, warranty, and sustaining operations.
 

Responsible:

• Incoming and In Process Support: Support in managing and developing programs and reporting systems for all product types globally in collaboration with Program Management. Lead global engagement to enable shared processes development and usage.
• Issues Resolution Leadership: Lead and drive issues to resolutions through hyper collaboration across the entirety of the Organization. Go to the work and drive a solution for corrective and preventative actions.
• Documentation and Quality Record Maintenance: Maintain quality records such as inspection reports, test data, and non‑conformance logs. Ensure documentation is complete, accurate, and aligned with company quality procedures and regulatory requirements for energy storage products.
• Testing and Validation Support: Assist in quality testing activities for assembled battery energy storage containers, including functional testing, safety checks, wiring verification, and system-level commissioning tests. Help ensure units meet performance and reliability standards before shipment
• Issues Triage: Serve as the front line for the quality intake systems and tasked with reducing ticket backlog and intake though the incorporation of lessons learned. Work to ensure tickets are properly assigned, prioritized, and evaluated for commercial risk. Use data analytics to review Non-Conformance Requests in the form of CAPAs, JIRAs, NCRs, and more.
• Product Readiness: Drive product development cycle decisions using quality-based business intelligence systems.

Job Description

·        To Coordination of product registration (new andrenewal) in the designated countries including provision of documents fordossier preparation and certificates within the specified timeframe proactivelyto complete product registration.

·        Point of contact between factories and theregulatory team of designated countries.

·        To Provide regulatory assessment for newproduct/change introduction

·        To Provide advice to internal and external teamsin interpreting relevant guidance documents and standards.

·        To Support preparation of documents for tendersubmission.

·        Any other ad-hoc duties which the superior mayassign from time to time

Qualification

•             Degree inrelevant Discipline

•             Min 3years relevant experience

Interested candidates please send in your resume to:

valerie@recruitexpress.com.sg

EA Personnel: Valerie Yong Kian Fung

CEI No.: R1103704

Recruit Express Pte Ltd, EA License No.: 99C4599

Key Responsibilities

• Define and implement comprehensive QA strategies, standards, and governance frameworks for ICT systems.
• Lead end-to-end testing efforts including functional, integration, system, regression, API, and performance testing.
• Design and develop automation frameworks using tools such as Selenium, Playwright, and Robot Framework.
• Integrate automated testing into CI/CD pipelines using tools like Jenkins, GitLab, Maven, and Docker.
• Collaborate with cross-functional teams including developers, product owners, and stakeholders to ensure quality delivery.
• Manage defect lifecycle, perform root cause analysis, and drive continuous improvement initiatives.
• Ensure compliance with security, regulatory, and government standards for ICT systems.
• Establish and monitor quality metrics, KPIs, and reporting dashboards.
• Lead and mentor QA teams, promoting best practices in Agile and Scrum environments.
• Support UAT, SIT, and production releases, ensuring system stability and reliability.

Technical Skills & Tools

• Automation & Testing Tools: Selenium, Playwright, Robot Framework, Cucumber, TestNG, Appium
• API & Performance Testing: Rest Assured, JMeter
• Programming Languages: Java, Python, TypeScript
• DevOps & CI/CD: Jenkins, GitLab, Maven, Docker
• Test Management & Collaboration: JIRA, TestLink, Confluence, Bitbucket

Qualifications

• Bachelor’s or Master’s degree in Computer Science, Information Technology, or related field (MCA preferred).
• 10+ years of experience in software quality assurance, with at least 5 years in a leadership or specialist role.
• Strong experience in ICT systems, enterprise applications, or government platforms.
• Proven ability to design scalable automation frameworks and drive test automation adoption.
• Experience working in Agile/Scrum environments with distributed teams.

The Project LSS Quality Executive is responsible for supporting the implementation and maintenance of the Quality Management System (QMS) at project sites, particularly for Large Scale Solar (LSS) developments. The role ensures that all construction and installation activities comply with ISO 9001 standards, regulatory requirements, client specifications, and approved methodologies, while promoting a strong quality culture across project teams.

Key Responsibilities

Quality Management & Compliance

• Assist in implementing and maintaining the Quality Management System (QMS) in accordance with ISO 9001, project specifications, and regulatory requirements.
• Ensure all site activities comply with approved method statements, inspection and test plans (ITP), and quality procedures.
• Monitor and verify material approvals, workmanship standards, and installation quality at site.
• Liaise with internal teams, consultants, and clients on quality-related matters.

QA/QC Inspection & Monitoring

• Conduct daily site inspections and quality checks for civil, mechanical, and electrical works related to solar farm construction.
• Ensure proper documentation and records are maintained for all inspections, tests, and approvals.
• Raise and track Non-Conformance Reports (NCR), Site Observation Reports (SOR), and ensure timely closure.
• Witness testing and commissioning activities where required.

Audit & Documentation Control

• Support internal and external quality audits at project sites.
• Maintain proper control of quality documents including drawings, method statements, ITPs, and reports.
• Prepare and submit quality reports, inspection records, and audit findings in a timely manner.

Continuous Improvement

• Assist in identifying quality issues, root causes, and implementing corrective and preventive actions (CAPA).
• Promote continuous improvement initiatives to enhance project quality performance.
• Support lessons learned documentation and implementation across projects.

Training & Awareness

• Support the implementation of Quality-related training and On-the-Job Training (OJT) at site.
• Promote quality awareness among site personnel to ensure adherence to standards and best practices.

Coordination & Support

• Work closely with Project Engineers, Site Supervisors, and subcontractors to ensure quality compliance.
• Support the QSHE Manager and Project Manager in achieving project quality objectives.
• Ensure timely communication of quality issues and progress updates.

• Bachelor’s Degree in Engineering (Civil, Mechanical, Electrical, or related discipline) or equivalent.
• Minimum 2–5 years of experience in QA/QC or Quality Assurance, preferably in solar, renewable energy, or construction projects.
• Basic knowledge of ISO 9001 Quality Management System and QA/QC practices.
• Experience in site inspection, documentation, and quality control processes is preferred.

Key Competencies:

• Strong attention to detail and commitment to quality.
• Good analytical and problem-solving skills.
• Effective communication and coordination abilities.
• Ability to work independently and in a team environment.
• Proficiency in MS Office and documentation control.

• 5-Day Work Week: Mondays – Fridays , 8:30am to 6:00pm

• Location: East

• Basic Salary: Up to S$4,200 (commensurate with experience)

• Industry: Healthcare

A leading healthcare provider is seeking a Quality Management Executive to support and drive quality improvement initiatives, patient safety standards, and regulatory compliance across its operations.

Job Responsibilities:

• Manage incidents, customer feedback and complaints, ensuring timely resolution and implementation of preventive measures

• Identify and assess risks to patient safety and quality of care

• Develop strategies to mitigate risks and enhance clinical quality and patient safety outcomes

• Monitor, analyse and evaluate data to assess effectiveness of quality programmes and initiatives

• Collaborate with internal stakeholders and external consultants to achieve and maintain certifications

• Support implementation of healthcare regulatory requirements, including data protection and health information policies

• Work with cross-functional teams to review and improve healthcare processes, workflows and procedures

• Track and maintain quality indicators (productivity, customer satisfaction, incidents, feedback) and prepare management reports

• Maintain document control and oversee organisation-wide documentation inventory

• Manage and track external correspondences with regulatory bodies

Job Requirements:

• Min. Diploma in any discipline

• Min. 3 years of relevant experience in quality management, preferably within the healthcare sector

• Experience in quality assurance, quality improvement, patient safety, and/or personal data protection

• Sound knowledge of statutory regulations and healthcare-related guidelines across all areas of healthcare operations

• Exposure to Root Cause Analysis (RCA) and Failure Modes and Effects Analysis (FMEA) will be advantageous

Looking for a change or a new challenge? Please email your detailed resume in MS Word format to cherry.cheng@celecti.com.sg

Cherry Cheng Wei (Ms.) | Talent Acquisition Consultant | CEI Reg. No: R26160225| Mobile no.: 89038330

Job Description & Requirements

The Quality System / QC Engineer is responsible for maintaining and improving the Quality Management System (QMS) and ensuring Product Quality through inspection, testing, and continuous improvement activities. The role ensures compliance with ISO 9001, ISO 14001, and ISO 45001 standards, customer requirements, and regulatory guidelines while supporting operational excellence.

________________________________________

Key Responsibilities

1. Quality Management System (QMS)

• Maintain and improve the Quality Management System in accordance with ISO 9001 / IATF 16949 / ISO 13485 (as applicable).

• Create and update Work Instructions, Procedures, Process Flow charts, Control Plans, and FMEA documents.

• Control and manage all QMS documents, including customer drawings, specifications, and procedures.

• Coordinate and conduct internal audits for ISO 9001, ISO 14001, and ISO 45001.

• Support customer audits and certification audits.

• Monitor corrective and preventive actions (CAPA) and ensure timely closure.

• Ensure compliance with customer-specific requirements.

• Cross-Functional Collaboration - Work closely with Planning, Production, R&D/Engineering Team

________________________________________

2. Quality Control (QC) Operations

• Supervise and manage QC Inspectors in their daily activities on the production floor.

• Establish and monitor incoming, in-process, and final inspection activities on the production floor.

• Review incoming, in-process, and final inspection reports, ensuring proper documentation and record retention in the system.

• Track and monitor in-coming and final outgoing product yield

• Manage non-conforming materials and disposition activities.

• Establish Statistical Process Control (SPC) and monitor process capability (Cp, Cpk).

• Analyze process data to identify trends, variations, and improvement opportunities.

• Drive root cause analysis and corrective actions report for process-related quality issues or customer complaints.

• Support new process introduction (NPI)

• Provide guidelines and training to QC Operators

• Coordinate and monitor construction activities to ensure work progresses according to the project schedule.
• Plan and track site works in line with the master programme and detailed work schedules.
• Liaise with the Professional Engineer on matters relating to temporary works and technical requirements.
• Work closely with consultants and subcontractors to resolve technical issues and ensure smooth site operations.
• Conduct site inspections, maintain construction quality standards, and address engineering issues promptly.

Requirements:

• Diploma in Civil Engineering or equivalent
• At least 5 years of relevant experience in construction projects with LTA infrastructure works.
• Experience with diaphragm wall (D-wall), bored piling, or tunnelling works.
• Able to coordinate site teams, subcontractors, and consultants effectively.
• Strong problem-solving skills and ability to manage site operations in a structured manner.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Information

· Salary Package: Basic (starting from 2k) + Performance Bonus

· Other Benefits: Medical & Dental coverage

· Working Days: Monday – Friday + Half-day Saturday

· Working Hours: 8.30am – 5.30pm (Weekdays), 8.30pm – 12.30pm (Saturday)

· Working Location: Ubi/Eunos

· Job Contract: Full-time Permanent role

Responsibilities

• Perform daily, weekly & monthly inspection reports.
• Analyse and trouble-shooting production quality issues.
• Material receiving inspection
• Disposition of non-conforming products (incoming & outgoing).
• Handle customers’ complaint (CAR) with effective corrective actions.
• Provide training to QC inspectors.
• Liaise with client inspector on inspection point(s).
• Conduct regular line audit and drive for quality improvement.
• Conduct internal ISO audit and manage external customer audit.
• Conduct PMI, Pressure & PT tests
• To keep and update all the Welding Procedure Specifications (WPS) and
  Procedure Qualification Records (PQR)
• To keep and update all non-conformance reports (NCR), follow-up sheet, calibration status report of measuring and test equipment.
• Carry out any other duties as and when assigned by the immediate supervisor or higher management.

Requirements

• 2 years relevant working experience in related industries
• ASNT Level II
• Attention to Detail
• Strong written and verbal communication skills
• Effective time management
• Independent & keen learner
• Flexible and adaptable
• Able to manage high levels of stress
• Proficient in Microsoft applications: Outlook, Excel, Word, Power Point, etc.

• Serving as technical expert to support production and resolve manufacturing issues.
• Supporting engineering changes, deviation request, training, qualification and update procedures.
• Streamline process through supporting continuous improvement and automation implementation.
• Providing support on improvement activities through workflow and digital tools.
• Ad hoc duties

Requirements:

• Min Diploma in Engineering
• Min 1-2 years of experience in production/manufacturing
• Able to think out of the box with strong desire to learn and a great teammate.
• Good communication skills

Interested & qualified applicants, please forward your latest CV to fion@pnnacle.com.sg

Responsibilities:

• Maintain and continuously improve the ISO 9001 quality management system, ensuring effectiveness across machining and sheet metal fabrication processes

• Plan and conduct internal quality audits, focusing on process compliance and effectiveness on the shop floor

• Lead, coach, and develop QA/QC inspectors to support in-process and final inspection activities

• Develop and implement inspection strategies and control plans aligned with tight tolerance machining and sheet metal fabrication requirements

• Interpret complex engineering drawings and ensure proper deployment of GD&T requirements into manufacturing and inspection processes

• Review and approve First Article Inspection (FAI) reports for new products and engineering changes

• Lead internal non-conformance management, including MRB activities, disposition (rework/repair/scrap), and validation of corrective actions

• Drive structured problem-solving (8D, 5 Whys) for internal quality issues, ensuring robust root cause identification and sustainable corrective actions

• Analyze quality data (scrap, rework, Cp/Cpk, yield trends) to identify systemic issues and drive continuous improvement

• Support New Product Introduction (NPI) to ensure manufacturability, inspection readiness, and quality risk mitigation

• Perform hands-on dimensional inspection for critical and complex features when required

• Drive shop-floor quality improvements, including mistake-proofing (poka-yoke) and standardization of best practices

• Take on additional responsibilities aligned with business and operational needs

Requirements:

• Diploma or Degree in Mechanical, Manufacturing, or related Engineering discipline

• Minimum 3 years of experience in a precision machining and/or sheet metal fabrication environment

• Proven hands-on experience with GD&T application and CMM inspection (FARO Arm / Fixed CMM)

• Experience handling tight tolerance components and complex geometries

• Practical experience in SPC, FMEA, and structured problem solving (8D)

• Strong working knowledge of ISO 9001 quality systems within precision machining and sheet metal environments

• Advanced GD&T proficiency (ASME Y14.5), with the ability to interpret complex drawings and support tolerance-related decisions

• Hands-on experience with CMM systems, including FARO Arm and fixed CMM, with capability in measurement execution, basic programming, and results interpretation

• Strong understanding of CNC machining (turning, milling) and sheet metal processes (laser cutting, bending, welding, finishing) and their impact on dimensional and cosmetic quality

• Proficiency in inspection techniques for tight tolerances, complex geometries, and formed components

• Solid knowledge of SPC, Cp/Cpk, FMEA, and control plans, with practical application on the shop floor

• Strong problem-solving capability, using structured methodologies such as 8D, 5 Whys, and Fishbone analysis

• Effective interpersonal and communication skills, with the ability to work cross-functionally with production, engineering, and quality teams

• Team-oriented, hands-on approach, comfortable operating in a fast-paced manufacturing environment

• High attention to detail with a practical, solution-focused mindset

Responsibilities:

• Maintain and continuously improve the ISO 9001 quality management system, ensuring effectiveness across machining and sheet metal fabrication processes

• Plan and conduct internal quality audits, focusing on process compliance and effectiveness on the shop floor

• Lead, coach, and develop QA/QC inspectors to support in-process and final inspection activities

• Develop and implement inspection strategies and control plans aligned with tight tolerance machining and sheet metal fabrication requirements

• Interpret complex engineering drawings and ensure proper deployment of GD&T requirements into manufacturing and inspection processes

• Review and approve First Article Inspection (FAI) reports for new products and engineering changes

• Lead internal non-conformance management, including MRB activities, disposition (rework/repair/scrap), and validation of corrective actions

• Drive structured problem-solving (8D, 5 Whys) for internal quality issues, ensuring robust root cause identification and sustainable corrective actions

• Analyze quality data (scrap, rework, Cp/Cpk, yield trends) to identify systemic issues and drive continuous improvement

• Support New Product Introduction (NPI) to ensure manufacturability, inspection readiness, and quality risk mitigation

• Perform hands-on dimensional inspection for critical and complex features when required

• Drive shop-floor quality improvements, including mistake-proofing (poka-yoke) and standardization of best practices

• Take on additional responsibilities aligned with business and operational needs

Requirements:

• Diploma or Degree in Mechanical, Manufacturing, or related Engineering discipline

• Minimum 3 years of experience in a precision machining and/or sheet metal fabrication environment

• Proven hands-on experience with GD&T application and CMM inspection (FARO Arm / Fixed CMM)

• Experience handling tight tolerance components and complex geometries

• Practical experience in SPC, FMEA, and structured problem solving (8D)

• Strong working knowledge of ISO 9001 quality systems within precision machining and sheet metal environments

• Advanced GD&T proficiency (ASME Y14.5), with the ability to interpret complex drawings and support tolerance-related decisions

• Hands-on experience with CMM systems, including FARO Arm and fixed CMM, with capability in measurement execution, basic programming, and results interpretation

• Strong understanding of CNC machining (turning, milling) and sheet metal processes (laser cutting, bending, welding, finishing) and their impact on dimensional and cosmetic quality

• Proficiency in inspection techniques for tight tolerances, complex geometries, and formed components

• Solid knowledge of SPC, Cp/Cpk, FMEA, and control plans, with practical application on the shop floor

• Strong problem-solving capability, using structured methodologies such as 8D, 5 Whys, and Fishbone analysis

• Effective interpersonal and communication skills, with the ability to work cross-functionally with production, engineering, and quality teams

• Team-oriented, hands-on approach, comfortable operating in a fast-paced manufacturing environment

• High attention to detail with a practical, solution-focused mindset

Company Overview

Innovative Pest Pte Ltd (Singapore) specializes in pest control and disinfecting services. We have expanded our expertise to meet client needs with a dedicated team committed to high service standards. Join us to grow your career in a supportive environment.

Job Summary

You will conduct pest inspections and treatments, communicate treatment plans to clients, maintain equipment and vehicles, and complete service documentation to ensure effective pest control operations.

Responsibilities

• Conduct thorough pest inspections and apply appropriate pest control treatments to client sites
• Communicate clearly with clients to explain treatment plans and address their concerns
• Maintain pest control equipment and company vehicle to ensure operational readiness and safety
• Complete accurate service reports and daily logs to document treatments and activities

Required competencies and certifications

• NEA certification
• Class 3 driving license
• Physical fitness to perform outdoor work safely and effectively

Preferred competencies and qualifications

• Good communication skills to interact professionally with clients and team members
• Responsible and punctual work habits to maintain service reliability

Other Information

Key Responsibilities:

• Monitor demand and issuance of inventory items with precision to ensure materials are available for production without delays.
• Process and manage all production demands efficiently, coordinating closely with the production team to meet their requirements.
• Monitoring accurate record of inventory and stock management system.
• Conversion of stock from SBUs. Including raising CV, arranging for transportation and managing transport adhoc form.
• Handle the processing and monitoring of parts returned from production, ensuring proper recording and timely updates in the system.
• Prepare and execute stocktake plan include processing physical inventory documents and preparing stocktake report.
• Prepare inventory status, issuance, returns, MOQ, stocktake and shelf-life reports and other ad hoc requests.
• Update Materials Requirement Planning (MRP) settings as requested by the Material Planning team.

Requirements and Skills:

• Completion of "O" Level/ Nitec or equivalent qualification is preferred.
• Proficient user of Microsoft Office applications, particularly Excel and Word, to manage data and reporting tasks efficiently.
• Familiarity with SAP system is preferred.
• Possess good interpersonal skill and a positive attitude to handle challenging customers and resolve tense situations.
• Strong interpersonal skills coupled with a positive, solution-oriented mindset, capable of handling challenging customer interactions professionally and resolving tense situations calmly.
• Ability to work effectively under pressure with a strong sense of urgency, maintaining accuracy and quality in a fast-paced environment. Willingness and flexibility to support operational requirements.

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported revenue of over $12b in 2025 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Best-in-Class Asia Pacific Index

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Job Title:  Quality Assurance Intern

Location: Wisma Capital A, Level 5, Wisma Tune, 19, Lorong Dungun, Bukit Damansara, 50490 Kuala Lumpur, Wilayah Persekutuan Kuala Lumpur
Type: Internship (Full-time)
Duration: min 3 months
Reports To: Product Manager

About the Role:

As a QA Intern, you will gain hands-on experience in ensuring the quality and reliability of our products. You’ll work closely with the engineering team to design, execute, and maintain test cases, automate testing processes, and contribute to the overall improvement of our software quality. This role is an excellent opportunity to apply QA concepts in a real-world environment, sharpen your technical skills, and learn industry best practices in software testing and automation.

Key Responsibilities:

• Assist in creating and maintaining automated test scripts for web and/or API testing.
• Support regression testing and continuous integration pipelines.
• Document and execute test cases, report defects, and collaborate with the team to resolve issues.
• Participate in code reviews and contribute to improving test coverage.
• Document test results and provide feedback on application usability and performance.
• Learn and apply QA best practices in a real-world product environment.

Requirements:

• Currently pursuing a Bachelor’s or Master’s degree in Computer Science, Software Engineering, or a related field.
• Basic understanding of QA concepts, SDLC, and STLC.
• Familiarity with at least one programming language (e.g., Java, JavaScript, or TypeScript).
• Exposure to automation frameworks (e.g., Selenium, Playwright, Karate) is a plus.
• Knowledge of REST APIs and tools like Postman is desirable.
• Strong problem-solving skills and eagerness to learn.
• Good communication and collaboration skills.

Bonus (Nice to Have):

• Experience with version control systems (e.g., Git, GitHub, GitLab).
• Familiarity with CI/CD tools such as Jenkins, GitHub Actions, or GitLab CI.
• Exposure to Agile or Scrum development methodologies.
• Basic understanding of database queries (SQL).
• Prior internship, academic project, or coursework involving QA or test automation.
• Curiosity for new technologies and a passion for building reliable, user-friendly products.

Job Description

As a Quality and Compliance Specialist, you will play a pivotal role in ensuring that all products and operations within Project WATT meet regulatory requirements and quality standards. This role focuses on managing product certification, conducting regulatory audits, and ensuring that operational processes align with local and international laws. Collaborating with technical and operational teams, you will safeguard compliance while driving continuous improvement in quality management.

Responsibilities

• Product Quality Compliance:

1. Ensure that all products (hardware and software) comply with relevant regulations and industry standards, such as TR25 for EV charging systems in Singapore.
2. Maintain and update product certifications and manage regulatory audits and inspections.
3. Review testing results and performance reports to verify adherence to quality standards.

• Operational Compliance:

1. Oversee business operations to ensure alignment with legal and regulatory requirements, such as data privacy and environmental standards.
2. Develop, update, and optimize internal compliance policies and procedures to reflect current regulations.
3. Prepare and submit compliance reports, maintaining effective communication with regulatory authorities.

• Team Collaboration:

1. Work closely with technical teams, including Firmware Engineers and Integration Engineers, to validate the compliance of products and systems.
2. Provide compliance guidance and training to other teams to promote a culture of regulatory awareness.

• Risk Identification and Management:

1. Identify potential compliance risks and recommend actionable improvements to mitigate them.
2. Lead quality and compliance enhancement projects, ensuring continuous improvement in these areas.

Requirements

• A bachelor’s degree in Engineering, Quality Management, Law, or a related field, with at least 3 years of experience in product quality or compliance management. Equivalent professional experience will also be considered.
• Strong understanding of regulatory requirements for EV charging systems or IoT products, including certifications such as TR25.
• Experience managing audits and certification processes with regulatory bodies.
• Proven ability to collaborate effectively with cross-functional teams to ensure adherence to compliance and quality standards.
• Strong analytical and problem-solving skills with meticulous attention to detail in documentation and reporting.
• Knowledge of operational compliance standards, such as data privacy laws or environmental regulations, is a plus.

Reporting to:

Project Manager