Total 2,886 construction engineer job vacancies in Others category in The Philippines

Primary Purpose:

A Senior Performance Analysis Engineer will serve as a technical domain owner while delivering capabilities in support of maintaining a high level of system quality and vehicle behavior for our autonomous driving technology. Ideal candidates for this position must have experience with system and sub-system level analysis, verification and validation methodologies, and cross team collaboration across software, testing and project management groups. Different from a traditional Software Quality Assurance (SQA) role, this position uniquely cross-cuts across “testing and operations” functions on the right half of the systems V-model and “software development and systems / safety requirements” functions on the left half of the V-model.

Essential Duties:

• Take technical ownership of an entire domain/sub-domain/system/sub-system (e.g., localization, motion planning, perception, prediction etc.), and maintain deep technical understanding across the AV stack
• Serve as the primary point of contact for performance analysis within said domain.
• Provide diagnostic guidance across teams when escalations occur.
• Lead end-to-end Root Cause Analysis (RCA), Fault Tree Assessment (FTA), Failure Mode Effect Analysis (FMEA) across public roads, closed course, simulation and Hardware-in-Loop (HIL)
• Drive both diagnosis as well as prognosis (risk trajectory, recurrence patterns, release immpact, etc.)
• Provide structured and detailed performance summaries to inform release readiness, commercial deployments, and KPI governance.
• Work with and lead efforts cross functionally across software, hardware, systems testing, operations and safety teams.
• Take ownership on removing high level engineering blockers affecting multiple teams.
• Take ownership of team-wide or org-wide KPIs/OKRs.
• Ensure performance metrics are communicated in a clear, structured manner across various teams, while remaining technically grounded.
• Drive automation and scalable analysis and reporting practices.
• Provide mentorship and structured feedback to peers and teammates, and support technical growth of junior engineers within the team.
• Partial travel is optionally recommended per business needs but not required for this role
• Other duties as assigned

Required Qualifications:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The requirements listed below are representative of knowledge, skill and/or ability required.

• Bachelor's or higher degree in Engineering such as Computer Science, Electrical Engineering, Systems Engineering, Software Engineering, Robotics highly preferred; or at least four years of equivalent knowledge and work experience
• 5+ years of professional experience working on safety critical and complex systems such as -- Robotics, Autonomous Vehicles, Automotive, Medical Devices or Aerospace Technologies
• Strong understanding of system and sub-system interactions in robotics/AV architecture.
• Experience with software engineering concepts, including requirements analysis, source control, build processes, design reviews
• Experience with Linux and scripting languages (E.g: Bash/Shell, Python)
• Experience using issue tracking and configuration management tools (E.g: Atlassian Confluence, Jira, Bitbucket, Git)
• Demonstrated problem solving skills and ability to think logically and remove bias from evaluation of problems
• Strong troubleshooting, debugging, and analytical and creative problem solving skills

Preferred Skills:

• Experience with systems verification and validation techniques
• Experience with automotive standards (E.g: ISO 12207, ISO 26262, ISO 21448)
• Experience with software quality management and assurance activities (E.g: IATF 16949, ISO 9001)
• Thorough understanding of robotics systems including sensors, actuators, mechatronics and software systems
• Work in cross collaboration teams to address problems and find solutions

1.

JOB DESCRIPTION

Job Title

ENGINEER

Occupation

ENGINEER

Job Description & Requirements

Job Description & Requirements

Job Description & Requirements

Job Description & Requirements

Job Description & Requirements

• Design, control, and implement electrical systems and products
• Develop manufacturing processes according to global engineering codes and standards
• Manage engineering projects and deliver them on time
• Define customer needs and requirements
• Ensure that installations and applications are in line with customer needs and safety standards
• Collaborate with engineers and technicians to design and apply new system processes
• Perform quality and performance analysis on new and legacy IT systems
• Summarize data and report on test results
• Examine needs on new equipment, calculate costs and help prepare budgets
• Monitor maintenance and inspection plans

1.

JOB DESCRIPTION

Job Title

ENGINEER

Occupation

ENGINEER

Job Description & Requirements

Job Description & Requirements

Job Description & Requirements

Job Description & Requirements

Job Description & Requirements

Engineer duties and responsibilities:

• Design and Development:Conceptualizing, planning, and executing projects to meet specific needs and objectives.
  Developing detailed designs, blueprints, and specifications for projects.
  Analyzing data, performing calculations, and conducting research to ensure designs meet requirements.
  Developing new products, systems, or processes.
• Problem Solving:Identifying and analyzing technical challenges and developing innovative solutions.
  Troubleshooting issues that may arise during design, implementation, or operation.
• Project Management:Planning, coordinating, and managing engineering projects from conception to completion.
  Preparing project plans, budgets, and timelines.
  Ensuring projects meet safety standards, regulatory requirements, and are economically viable.
• Testing and Quality Assurance:Testing prototypes or finished products to ensure they function properly and meet safety standards.
  Conducting quality control tests on new products.
  Ensuring that products, systems, or processes adhere to relevant regulations, standards, and specifications.
• Documentation and Communication:Creating accurate project specifications and technical reports.
  Communicating technical information to clients, colleagues, and other stakeholders.Maintaining accurate records of engineering processes, parts used, and repairs done.

1.

JOB DESCRIPTION

Job Title

ENGINEER

Occupation

ENGINEER

Job Description & Requirements

Job Description & Requirements

Job Description & Requirements

Engineers design, build, and maintain structures or processes, with duties including creating plans, conducting tests, troubleshooting problems, and ensuring safety and compliance. They also research, analyze data, and develop innovative solutions.

Here's a more detailed breakdown of common engineer duties and responsibilities:

Design and Development:

• Conceptualization and Planning:Engineers are involved in the initial stages of projects, developing ideas, and creating detailed plans and specifications.
• Design and Analysis:They design systems, products, or processes, ensuring they meet specific requirements and standards.
• Prototype Development:Engineers often design and test prototypes to ensure functionality and safety.
• CAD Drawings:They create technical drawings and diagrams using computer-aided design (CAD) software.

Project Management and Execution:

• Project Planning:Engineers plan and manage engineering projects, setting timelines, budgets, and milestones.
• Coordination:They coordinate with other teams and stakeholders to ensure projects are completed on time and within budget.
• Supervision:Engineers may oversee construction or manufacturing processes, ensuring they meet quality standards and safety regulations.
• Quality Control:They conduct tests and inspections to ensure products or systems meet required standards.

Problem Solving and Innovation:

• Troubleshooting:Engineers identify and analyze technical problems, developing innovative solutions.
• Research and Development:They conduct research to identify and solve problems, and develop new technologies or processes.
• Data Analysis:They analyze data to identify trends, patterns, and potential problems, and to optimize designs or processes.

Safety and Compliance:

• Safety Standards:Engineers ensure that designs and processes comply with safety standards and regulations.
• Regulatory Compliance:They ensure that projects meet regulatory requirements and industry standards.
• Risk Assessment:They identify and assess potential risks, developing mitigation strategies.

Other Important Skills:

• Communication:Engineers need strong communication skills to effectively collaborate with colleagues, clients, and stakeholders.
• Analytical Skills:They need strong analytical skills to solve problems and make informed decisions.
• Problem-Solving Skills:They need to be able to identify problems, analyze them, and develop effective solutions.
• Attention to Detail:Engineers need to pay close attention to detail to ensure accuracy and precision in their work.

• Making plans using detailed drawings
• Preparing estimates and budgets
• Creating accurate project specifications
• Designing engineering experiments
• Creating technical reports for customers
• Completing regulatory documents concerning safety issues
• Finishing projects on time and within budget
• Communicating with clients and coworkers about analysis results

Job Description:

• Calculated BOQ and invited subcontractor for cost estimation.
• Sourced Quotations and Specifications from suppliers and contractors.
• Collected BQ and arranged cost comparison.
• Attended internal, external meeting.
• Performed site inspection to ensure that work is carried out based on specification and drawing.
• Prepared report and method statement whenever necessary.
• Supervised daily site installation.
• Day to Day management of the site, including supervised and monitored the site labour force.
• Inspected Handover inspection with consultant engineer and client.

Responsibilities:

• Checked technical specifications, M&E drawings and documents.
• Coordination of drawings with clients, main contractors and updating of drawings base on meetings and discussion.
• Produced M&E Services design drawing including electrical system and ELV system, Fire Protection system, Plumbing and waste, etc.
• Performed draft detailed for M&E shop drawings, as built drawings and standard detail and SLD drawing, Layout, Schematic based on preliminary concepts, sketches, calculation, specification sheets and other data.
• Provided technical support and assistances to project manager and engineers at every project stages.

Job description

• To assist the Project Manager or Project Engineer in the daily execution of work.
• To supervise the work of sub-contractors and in-house workers.
• To work closely with other site operations staff to meet the project schedule.
• Ensure installation is carried out as per construction drawings.
• To monitor the progress and quality of work being performed by workers.
• Ensure that works are executed within an acceptable standard of workmanship.
• Attend the daily tool-box meeting and convey clear instruction accordingly.
• Understand and ensure compliance in project requirement and scope of work.

Requirement

• At least 1 Year(s) of working experience in the related field is required for this position.
• Highly proactive attitude, self-motivated, team player, strong problem-solving and communication skills.

Responsibilities:

• Responsible for setting up and maintaining the Hazardous Area Equipment Register and associated certifications using vendor documentation and bulk purchase orders.
• Collaborate closely with completions/PIMS personnel, discipline leads, Package Responsible Engineers, job site EEHA team, and report to the EEHA Coordinator.
• Verify and compile Hazardous Area Dossiers and maintain the Competency Matrix.
• Review and verify suppliers’ schedules of electrical equipment in hazardous areas and Equipment NRTL certificates.
• Monitor and flag detailed inspection status of equipment supplied by vendors, including integrated and shipped loose items.
• Provide ongoing support to the site EEHA team.
• Input bulk site installation data received from the Job Site EEHA administrator into the HAER system.
• Good understanding of EEHA requirements for design, procurement, installation, and certification.

Requirements:

• Bachelor’s degree in Engineering.
• Holds recognized EEHA qualifications such as CompEx for NEC (Modules Ex01–Ex04), equivalent certification, or at minimum the NEC 500 Foundation Certificate.
• Completed Ex-14 (Responsible Person) training course with certification.
• Minimum 6 years of working experience in offshore oil and gas project management and engineering execution, specifically in electrical engineering.
• Experience in electrical engineering design and execution for oil and gas projects.
• Able to liaise effectively with internal and external stakeholders
• Strong understanding of strategies, work methods, processes, and systems in project and engineering execution.
• Competent in managing ambiguity, conflict, and working in a culturally diverse environment.
• Strong interpersonal and influencing skills.
• High awareness of safe working practices related to design, construction, mechanical completion, pre-commissioning, and commissioning of oil and gas facilities.

Our Addresses and Working Hours:

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thurs: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description:

• Require an experienced candidate to support IAM Transformation Program across SailPoint IIQ, CyberArk, Conjur, Secret Hub, Ping Identity, and Identity Store in the Cybersecurity Platform Operations team.
• The IAM Transformation Program will deploy and operationalize enhancements for over 150 applications across these platforms.
• The individual will be responsible for deployment activities across the IAM platforms, including production rollout, validation testing, issue remediation,and incident handling

Skillset (Must have):

• CAT-1 cleared/eligible candidate is required for this role.
• Candidate should be flexible and available towork during weekends and after-office hours when necessary to provide operational, deployment and post-deployment support
• Possess a degree in Computer Science/InformationTechnology or related field
• Minimum 3 years of hands-on and technical experience in deploying and managing Identity and Access Management (IAM)platforms, covering SailPoint IdentityIQ, CyberArk, Conjur, Secrets Hub, and Ping Identity
• Proven experience in implementing, configuring, and managing SailPoint IdentityIQ, including Lifecycle Management(LCM) and Joiner-Mover-Leaver (JML) workflows
• Experience in maintaining and troubleshooting SailPoint IdentityIQ identity workflows, roles, certification campaigns, and policies
• Experience with SSO, SAML, OAuth, OIDC, SCIM federated protocols.
• Hands-on experience deploying connectors for centralized API authentication using PingID
• Document post-deployment validation results and document Standard Operating Procedures, and provide knowledge transition to theCPO team
• Identify and propose automation opportunities to streamline operational support and reduce manual effort.
• Able to provide guidance to CPO team on resolving technical issues and incidents.

Job Responsibilities:

• Report to Project Manager
• Preparing work schedules for contractors and laborers
• Communicating with contractors and suppliers
• Organise and coordinate activities on site
• Good Knowledge on Sequence of works
• Monitor progress, quality of worksmanship and compliance with contract requirements

Qualifications:

• Strong organizational and multitasking skills.
• Excellent communication and interpersonal abilities.
• Ability to thrive in a fast-paced environment and adapt to changing priorities.

What We Offer:

• A dynamic and supportive work environment with opportunities for professional development.
• Mentorship from experienced professionals in the industry.
• Competitive salary and benefits package.

• Conduct technical reviews to ensure compliance with project requirements.

• Coordinate activities with subcontractors in accordance of project schedules and contract requirements.

  • Manage budget and expenditure of the project to ensure adherence to budgetary guidelines.
  • Manage workplace safety in accordance to safety and health regulations.

1. Skills

Welding types: Arc welding, MIG, TIG

Cutting & joining metal parts

Reading simple drawings (basic is enough)

Using tools safely

2. Experience

Freshers can join helper jobs

1–3 years experience = better salary

Site work experience (construction is useful)

3. Certification (important)

Safety course like WSQ (Workplace Safety and Health)

Welding certificates (improves job chances)

Company may test your welding skill before hiring

4. Physical Requirements

Strong body (lifting, standing long time)

Work in heat, outdoor or confined space

• $4,000 - $5,000 + Bonus
• A reputable A1 main contractor with 33+ years of experience, specializing in large-scale infrastructure projects.
• 5 days | HQ - Joo Koon (7mins walk/ 1 bus stop from Joo Koon MRT)
• Attractive welfare benefits - Comprehensive Packages (

1) Liaise with architects and engineers to gather products and structural requirements and designs

2) Creating accurate CAD drawings from hand sketches, verbal instructions, and site visits

3) Seamlessly integrating and working with project managers, design consultants, and sub-contractors, to produce and alter drawings

4) Thinking creatively and critically to support the project team in the design process, to create sketches and drawings that work.

5) Creating and continually updating project drawing lists

6) Printing various formats of drawing sets for project managers and site superintendents

7) Outstanding fluency and skill within the AutoCAD program

8) Excellent communication skills; listening; comprehension and feedback

ConstructionSupervisor Job Responsibilities:

Completesconstruction projects by planning, organizing, and controlling projects;completing quality inspections; supervising sub-contractors and staff.

ConstructionSupervisor Job Duties:

• Accomplishes construction objectives by selecting, orienting, training, assigning, scheduling, coaching, counseling, and disciplining employees; communicating job expectations; planning, monitoring, appraising job contributions;recommending compensation actions; adhering to policies and procedures.
• Manages sub-contractors by locating, evaluating, and selecting sub-contractors; monitoring and controlling performance.
• Meets operational standards by contributing information to strategic plans and reviews; implementing production, productivity, quality.
• Prevents fines and interruptions by complying with, and enforcing, codes.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures; complying with legal regulations.
• Updates job knowledge by tracking and understanding emerging construction practices and standards; participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations.
• Enhances organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.
• Laise with workers and visit workers dormitory etc..
• Maintenace good relationship with workers.