Total 204 process improvement manager job vacancies in Maintenance / Repair category in The Philippines

• Support departmental objectives and daily test operations
• Coordinate Glide and TDS processes, including spec enhancement, process improvement, and special rescreen specifications
• Support continuous cost improvement initiatives related to test heads
• Support continuous quality improvement initiatives especially analysis on customer returns.
• Drive continuous test process and quality system improvement (e.g. SMART Test, CAS)
• Coordinate Test Cell Controller processes, including recipe setup to meet product requirements and support engineering runs
• Improve product quality through early detection, prevention, and post‑test failure analysis
• Support continuous improvement of test quality triggering systems and media yield without impacting HDD performance
• Ensure all test process indicators, triggering limits, monitoring, and reaction plans are adequate and effective
• Verify, control, monitor, and propagate new processes and new equipment into PN Test
• Coordinate deployment and updates of test machine, robot, and tester software
• Assist engineers with daily operational support and special projects
• Ensure compliance with ISO standards, documentation, safety rules, and cleanroom protocols

• Support departmental objectives and daily test operations
• Coordinate Glide and TDS processes, including spec enhancement, process improvement, and special rescreen specifications
• Support continuous cost improvement initiatives related to test heads
• Support continuous quality improvement initiatives especially analysis on customer returns.
• Drive continuous test process and quality system improvement (e.g. SMART Test, CAS)
• Coordinate Test Cell Controller processes, including recipe setup to meet product requirements and support engineering runs
• Improve product quality through early detection, prevention, and post‑test failure analysis
• Support continuous improvement of test quality triggering systems and media yield without impacting HDD performance
• Ensure all test process indicators, triggering limits, monitoring, and reaction plans are adequate and effective
• Verify, control, monitor, and propagate new processes and new equipment into PN Test
• Coordinate deployment and updates of test machine, robot, and tester software
• Assist engineers with daily operational support and special projects
• Ensure compliance with ISO standards, documentation, safety rules, and cleanroom protocols

JOB SUMMARY:

The job involves supporting departmental objectives and daily testing operations, coordinating various processes to enhance specifications and improve quality and cost efficiency. Responsibilities include managing test cell processes, overseeing recipe setups, and improving product quality through early detection and failure analysis. The role also requires ensuring compliance with ISO standards and safety protocols, as well as assisting engineers with operational support and special projects. Continuous improvement in testing processes and quality systems is a key focus.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Support departmental objectives and daily test operations
• Coordinate Glide and TDS processes, including spec enhancement, process improvement, and special rescreen specifications
• Support continuous cost improvement initiatives related to test heads
• Support continuous quality improvement initiatives, especially analysis of customer returns.
• Drive continuous test process and quality system improvement (e.g. SMART Test, CAS)
• Coordinate Test Cell Controller processes, including recipe setup to meet product requirements and support engineering runs
• Improve product quality through early detection, prevention, and post‑test failure analysis
• Support continuous improvement of test quality, triggering systems, and media yield without impacting HDD performance
• Ensure all test process indicators, triggering limits, monitoring, and reaction plans are adequate and effective
• Verify, control, monitor, and propagate new processes and new equipment into PN Test
• Coordinate deployment and updates of test machine, robot, and tester software
• Assist engineers with daily operational support and special projects
• Ensure compliance with ISO standards, documentation, safety rules, and cleanroom protocols

JOB SUMMARY:

The job involves supporting departmental objectives and daily testing operations, coordinating various processes to enhance specifications and improve quality and cost efficiency. Responsibilities include managing test cell processes, overseeing recipe setups, and improving product quality through early detection and failure analysis. The role also requires ensuring compliance with ISO standards and safety protocols, as well as assisting engineers with operational support and special projects. Continuous improvement in testing processes and quality systems is a key focus.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Support departmental objectives and daily test operations
• Coordinate Glide and TDS processes, including spec enhancement, process improvement, and special rescreen specifications
• Support continuous cost improvement initiatives related to test heads
• Support continuous quality improvement initiatives especially analysis on customer returns.
• Drive continuous test process and quality system improvement (e.g. SMART Test, CAS)
• Coordinate Test Cell Controller processes, including recipe setup to meet product requirements and support engineering runs
• Improve product quality through early detection, prevention, and post‑test failure analysis
• Support continuous improvement of test quality triggering systems and media yield without impacting HDD performance
• Ensure all test process indicators, triggering limits, monitoring, and reaction plans are adequate and effective
• Verify, control, monitor, and propagate new processes and new equipment into PN Test
• Coordinate deployment and updates of test machine, robot, and tester software
• Assist engineers with daily operational support and special projects
• Ensure compliance with ISO standards, documentation, safety rules, and cleanroom protocols

RESPONSIBILITIES

BROAD FUNCTIONS:

• Responsible for smooth operations of the plant utilities system
• Coordinate and provide support to production / manufacturing needs
• Coordinate and execute Facilities cost saving & improvement programs
• Ensure all the subscribe system are maintained
• Lead and liaise with relevant local government agencies & contractors
• Lead and develop direct reports

Regular

• Oversee and lead the team to establish procedure, system monitoring & preventive maintenance to ensure smooth operation
• Identify system weakness and implement improvement/enhancement project to ensure smooth operation
• Lead facilities operation team to support production / manufacturing needs
• Lead facilities operation team in review & analyse the operating data to optimize the Facilities operating system
• Plan, supervise and lead the team in execute cost saving & improvement program
• Control operating expenses to ensure within budget
• Ensure compliance to IMS, ISO9000, ISO14000, Contamination Control, Housekeeping & Safety
• Liaise with contractor, consultant on the facilities related matters
• Lead and develop direct reports through hands-on and proper training.
• Carry out special task as assigned by Senior Manager/ Dept. Head
• Support the activities to the company needs

Job Summary:
The Sputter Process Technician is responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. 

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform process characterization for sputter equipment and materials.
• Conduct  buy-off by verifying key process input variables (KPIV), including pressure, temperature, and voltage.
• Perform measurements and data collection for characterization samples.
• Monitor key process output variables (KPOV) during production to ensure process stability and product quality.
• Perform process adjustments as needed to maintain specifications and resolve deviations.
• Assist in troubleshooting process and equipment issues to minimize downtime.
• Maintain accurate records of process parameters, test results, and adjustments.
• Adhere to safety guidelines and cleanroom protocols at all times.

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

As a Process Technician, you will support plant operations by assisting with troubleshooting, process optimization, and monitoring processing parameters. Your duties include preparing solutions, staging components for autoclaving, and aiding in production sample testing. You will ensure compliance with GMP, EHS standards, and regulatory requirements, follow procedures, evaluate documentation, and contribute to safety audits while working with internal and external inspectors.

Key Responsibilities

• Play a key role in the hands-on execution of plant operations while providing valuable support to Manufacturing Associates in troubleshooting and resolving issues.
• Monitor and analyze processing parameters to identify trends and uncover opportunities for process optimization and improvement.
• Prepare solutions and equipment, ensuring smooth operation and efficiency.
• Stage components for autoclaving and washing, contributing to the production flow.
• Assist in the testing of production samples and leverage any experience with analytical instruments to enhance process accuracy.
• Actively participate in continuous improvement initiatives, helping to drive operational excellence.
• Contribute to safety audits and ensure that all activities align with industry standards and regulations.
• Ensure strict adherence to EHS, regulatory, and GMP requirements, maintaining a high level of compliance.
• Follow written procedures, quickly recognize malfunctions, and take prompt action to report and resolve issues.
• Evaluate documentation and data in line with company and regulatory guidelines, ensuring accuracy and compliance.
• Engage with internal and external inspectors, maintaining open communication and fostering transparency.
• Apply your knowledge of GMP to ensure the highest standards of production practices.
• Use basic statistical and mathematical skills to analyze data and make informed decisions.
• Effectively organize tasks, manage multiple priorities, and meet deadlines in a fast-paced environment.
• Leverage your understanding of basic chemistry, biology, and physical principles to support various plant operations.
• Have a solid grasp of analytical methods to ensure precision and quality in production.

Required Qualifications

• Diploma in Science or Engineering.
• NTC/ITC/Diploma in Chemical, Pharmaceutical, Life Sciences, or Bio-processing-related disciplines.
• Fresh graduates are highly encouraged to apply.
• Proficiency in reading and writing English.
• Strong commitment to cGMP and EHS compliance in clean-room plant operations (prior experience with cGMP is a plus).
• Knowledge of plant and unit operations (e.g., autoclaves, parts washers, process equipment) and strong problem-solving skills.
• Excellent self-motivated team player with a hands-on attitude and effective communication skills.
• Familiarity with systems like Emerson DeltaV, LIMS, and TrackWise.
• Ability to understand, apply, and evaluate basic chemistry, biology, and physical principles.
• Willingness to work shifts, including 24/7 operations.
• Strong mechanical ability and expertise.

Why join us?

• Generous Leave Policy.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions? If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

Role& Accountabilities:

• Assure compliance with KC site Environment, Health and Safety Management System(EHSMS) and Quality Management System (QMS) requirements, policies and procedures

• Ensure conformance to product specifications and team delivered quality products, quality d efects are identified and rectified immediately

• Achieve the production target and limit the waste within budget within the shift

• Encourage cohesiveness of the team to support the department’s objectives

• Allocates and guide the team members to perform required tasks safely and efficiently

• Ensure that all SOP and check list are accomplished during the operations

• Lead problem solving and guide the team member to resolve the machine issues within the crew

• Initialed the jobs rotation and crew training

• Ensure alignment to corporate/regional internal control guidelines when putting up process and procedures

Job Responsibilities

• Verify and analyze hold lot rejects whether valid, invalid and escalate if in doubt or not meeting internal requirements.
• Ensure smooth release of hold lots to meet shipment through verification, analysis and disposition.
• Pre-alert, trigger and feedback hold lot or issues to upstream process for containments and/or action improvements.
• Provide hold lot or low yield reports to engineering team for tracking, monitoring, continuous improvements and/or escalation.
• Coordinate and follow up with cross functional team on incoming and Backend lot disposition to ensure shipment deliverables.

Job Requirements

• Higher Nitec or Nitec in any Engineering field
• Minimum 3 years working experience preferred

• Serve as the first point of contact for all process-related issues
• Support engineers in handling process-related functions to ensure efficient production
• Assist in developing and maintaining process operation flows based on customer and business requirements
• Ensure production work instructions are properly maintained, including SFC control and SAP processes
• Participate in continuous improvement initiatives (Kaizen activities)
• Conduct training for production staff on work instructions and process updates
• Provide support for New Product Introduction (NPI) and mass production runs
• Participate in ISO-related activities, including implementation and maintenance

Requirements

• Strong knowledge of manufacturing processes with a good understanding of process workflows
• Prior experience in a relevant manufacturing environment is preferred
• Knowledge of BOM management (Agile system preferred)
• Ability to identify, follow up, and resolve BOM-related issues
• Good team player with strong interpersonal skills
• Able to collaborate effectively with peers, engineers, and management

Interested candidates, please send your detailed resume stating Past Employments, including Reasons of Leaving, Last Drawn Salary for the most recent 2 positions (breakdown of basic salary, allowance, bonuses etc), Expected Basic Salary and availability.

WE REGRET TOINFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)
Posting Personnel: Quennie Chen
EA Personnel Reg No.: R1222837

By sending your job resume to us, it shall be deemed that you have agreed and hereby give your consent to MANFIELD in collecting, using and/ or disclosing your personal data for the purpose of accessing and processing your job application and/ or for future job opportunities within MANFIELD and/ or with the client(s) of MANFIELD. If you wish to withdraw your consent, please notify us. Kindly visit our company website for more information on the Privacy Policy.

Job Description:

• Contribute to Life Science projects for Antaes Asia clients
• Perform routine preventive, corrective, and predictive maintenance on manufacturing and utility equipment (e.g. bioreactors, chromatography skids, ultrafiltration systems, mixers, autoclaves, CIP/SIP systems).
• Troubleshoot mechanical/electrical issues to minimize equipment downtime and support uninterrupted production.
• Assist in equipment installation, commissioning, and qualification (IQ/OQ/PQ) in compliance with regulatory expectations.
• Create and update Bill of Materials (BOMs), spare parts lists, and maintenance documentation in CMMS/ERP systems.
• Execute maintenance activities according to SOPs, GMP, safety, and EHS standards.
• Support root cause investigation and implement corrective/preventive actions (CAPA) for equipment-related deviations.
• Collaborate with cross-functional teams including Manufacturing, Engineering, Validation, and Quality.
• Participate in continuous improvement initiatives to enhance equipment reliability and lifecycle management.
• Participate in design reviews, HAZOPs, FATs/SATs as needed for utility and equipment systems.
• Contribute to the promotion of Antaes services on top of assistance provided to clients

Job Requirements:

• Diploma / Technical Certificate in Mechanical, Electrical, Mechatronics, Engineering, or related field.
• 2–5 years of hands-on maintenance experience in pharmaceutical, biologics, or regulated manufacturing is preferred.
• Experience working with GMP-regulated equipment and CMMS systems (e.g. SAP, Maximo).
• Familiarity with BOM structuring, spare parts management, and equipment documentation.
• Strong mechanical/electrical troubleshooting skills
• Understanding of GMP and cleanroom practices
• Ability to interpret P&IDs, schematics, and equipment manuals
• Strong analytical, troubleshooting, and documentation skills.
• Candidate must be highly motivated, be able to work independently as well as in a team and have good organizational and oral and written communication skills

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Degree in Mechanical/Manufacturing/Aeronautical Engineering or equivalent.
• Minimum 3 years of working experience in MRO industry
• Knowledge of special processes such as Weldng (TIG/EBW), Thermal Spray, Heat Treatment, Machining will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description

• Masking, grit blasting, and chemically cleaning parts to prepare for coating or heat treatment.
• Operating vacuum furnaces for processes like hardening, tempering, annealing, and brazing.
• Setting up and performing plasma spray coating, judging spray flow and speed for precision.
• Measuring coating thickness, maintaining logs, ensuring work meets specifications and quality requirements.
• Using stackers and other machinery to move materials and parts.
• Completing paperwork, system transactions, and adhering to safety & quality protocols.

Requirements

• Min Nitec in Precision Engineering / Aerospace Machining / Mechanical or equivalent
• Min 2 year of experience in laboratory in Aerospace Industry

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Responsibilities:

·      Manage the daily operations and maintenance of assigned properties, ensuring all facilities and M&E systems and equipment are functioning effectively.

·      Oversee and manage the team of Engineers, Technical officers, specialists, sub-contractors in all the disciplines.

·      Oversee both Hard and Soft maintenance Facilities Services, ensure technical maintenance and operational support services to maintain building functionality and service quality.

·      Responsible for planning and implementing preventive maintenance program for all services and ensure proper contracts administration and management. Involve with M&E services maintenance and oversee soft services contractors.

·      Ensure operational issues and emergencies are attended promptly and rectified with minimal inconvenience and disruption.

·      Monitor and track all maintenance works and their progress status. Monitoring of KPIs to ensure compliance with performance framework.

·      Ensure compliance with safety and environmental regulations.

Requirements:

·      Minimum8-10 years' experience in facilities management

·      Strong technical knowledge of M&E facilities maintenance / building systems, maintenance procedures and regulatory requirements

·      Degree qualification in facilities management, engineering, building or any relevance

We would like to invite interested applicants to apply.

Thomas Tan Teck Nang

Registration No: 12C6253

License No:R2094900

By submitting an application or your resume, you are deemed to have consented to Dynamic Human Capital Pte Ltd collecting, using and disclosing your personal data for the purposes stated in our privacy notice (https://dhc.com.sg/privacy-policy). You acknowledge that you have read, understood, and agree with the terms in our privacy notice.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

Ship Repair Manager 
Working hours : 5.5 days (Weekday 830AM - 530PM ; Saturday 830AM-1230PM)
Working location: Pioneer Sector 1, Singapore 628416 (Transport provided in Jurong)
Salary: $4000 - $5000

Job Description:

• Conduct feasibility studies of prospective projects to evaluate profitability and sustainability of production operations
• Design manufacturing plans for machining, forming, joining and other relevant processes based on project requirements
• Determine additional infrastructure requirements to support manufacturing and production requirements
• Oversee production timelines against production status reports
• Approve production strategies proposed by team members after evaluating budgets and resources
• Verify feasibility of design specifications for equipment installation locations and set-ups
• Review vibration analysis, thermal analysis and other performance test results to confirm installation techniques
• Strategise appropriate launching methods for ships
• Verify acceptability of ballast tank conditions prior to launch
• Produce keel laying plan for launch
• Take stock of individual machinery, equipment and system status on board ships and/or rigs prior to launch
• Prepare emergency response procedures for launch failures
• Verify commissioning requirements proposed by team members
• Review commissioning test results
• Manage a team of production engineers
• Evaluate results from market research and propose implementation of best practices in manufacturing
• Design equipment coding standards for organisation in liaison with quality department
• Approve deployment of new technologies for relevant manufacturing processes after evaluating budgets and skills on hand
• Manage department's compliance to risk management framework policies and processes
• Analyse viability of workplace improvements and change management initiatives

Requirement:

• Experience in ship repair / marine industry with team management experience.

• Relevant Diploma / Degree in Engineering or Marine-related field preferred.

• Familiar with safety and compliance procedures in shipyard operations.
  

  If you are keen to apply, please send me your resume and job applied for on WhatsApp at 9789 3505 or email me at anabel.thesupreme@gmail.com (˶ᵔ ᵕ ᵔ˶)

  ❄️Anabel Boon Xue Qi | Recruitment Consultant (R25159272) |