Total 312 mechanical engineer job vacancies in Maintenance / Repair category in The Philippines

Job Responsibilities:

• Project & Service Co-ordination with suppliers / preparation of risk assessment
• Handle installation & commissioning of HVAC & Power System
• To perform schedule preventive & corrective maintenance of the system
• To carry out troubleshooting and repair works if necessaryting and repair works if necessary.

Job Requirements:

• NITEC/ Higher NITEC/ Diploma/ Degree in Electronic & Electrical Engineering or equivalent.
• 1 - 2 years of relevant working experience.
• Fresh graduates are welcome. Necessary training will be provided to successful candidates.
• Candidate with good experience will be considered for senior post
• Possess Good Interpersonal & Communication Skills
• Able to work independently, self-motivated and a team player
• Class 3 Driving License preferred

Other Info

• Industry/ Organization Type: Datacenter / Critical Infrastructure & Industrial Segment
• Working Location: Aljunied
• Working Hours: Monday - Friday (9:00 AM - 6:00 PM)
• Salary: Basic + Allowance
• Duration: Permanent Role

Key Roles and Responsibilities

• To troubleshoot and maintain/service security systems at clients’ premises
  
• Attend to fault calls during/after office hours
  
• Support Maintenance Lead to upkeep Clients’ security system inventory list and maintenance spares
  
• Support Maintenance Lead to liaise with clients, integrated facility management representatives and trade contractors to facilitate work at clients’ premises
  
• Liaise closely with clients, integrated facility management representatives on all service/maintenance related issues to achieve optimal results
  
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act
  
• Perform any other technical tasks as required including new installations, A&A, HOTO, T&C and equipment replacement etc
  

Requirements

• Diploma/Higher Nitec/Nitec in Engineering/IT or relevant working experience in the related field
  
• Hands on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems, CCTV systems and Electronic Key Management System
  
• Additional knowledge in hardware configuration, System Networking and integration with third-party systems will be an advantage
  
• Must be a team player, independent and willing to take ownership and pro-active in problem solving
  
• Driving License (Car or Motorbike) – Preferably if candidate possesses its own vehicle
  
• Singapore Citizens are preferred
  
• Work Location is at 3 Shan Road/Clients’ premises
  
• 5 days work week
  
• Require to perform rotational standby duties
  
• Experienced candidates will be considered for Maintenance Engineer
  
• Fresh Graduates keen to seek a career path in security system are welcome to apply as a Maintenance Technician

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Degree in Mechanical/Manufacturing/Aeronautical Engineering or equivalent.
• Minimum 3 years of working experience in MRO industry
• Knowledge of special processes such as Weldng (TIG/EBW), Thermal Spray, Heat Treatment, Machining will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

• Responsible for corrective and preventive maintenance of plant machinery and monitoring of critical spare parts.
• Carry out corrective maintenance on plant machines.
• Support on preventive maintenance and machine repair.
• Attend to machines installation, modification, safety items, laboratory equipment, etc.
• Identify and carry out improvement items for machines.
• Liaise with machine agents for repair or maintenance of machines.

Requirements:

• Degree in Electrical/Electronic or Mechanical Engineering
• Prefer 2-3 year(s) of experience in maintenance/repair of machine in a manufacturing environment.
• Good trouble shooting, presentation and analytical skills.
• Good knowledge of PLC programming skills.
• Self-disciplined, independent and able to work under pressure.
• Able to communicate with all levels of staff.
• Able to commit to 12 hours shift work.

Manufacturing Industry

Loyang Area

Interested Applicants, kindly email your detailed resume via email to hr@tempserv.com.sg

Tempserv Pte Ltd

License No : 06C3745

Audris Teo/ EA Personnel No: R1102063

Main Duties and Responsibilities

a. Building System Maintenance

• Plan, execute, and oversee preventive maintenance of building facilities systems.
• Systems include: Electrical System, HVAC System, MV System, Compressed Air System, P&S System etc.
• Ensure compliance with safety standards and operational reliability.

b. Predictive Maintenance

• Implement predictive maintenance strategies leveraging IoT sensor solutions and AI-driven applications.
• Drive KPIs for energy savings, power interruption, and faster breakdown recovery.
• Continuously improve maintenance efficiency through data-driven insights.
• To support and develop AI-Driven Maintenance Work Process (MWP)

c. Utilities System Management

• Manage and maintain utilities supply systems including HT/LT, Digital Metering, Energy Monitoring Systems, Water Supply, and Gas Supply.
• Monitor performance and ensure uninterrupted supply of critical utilities.

d. Vendor Submission and Management

• Lead and manage plant facilities repair and improvement projects.
• Collaborate with cross-functional teams to review vendor design submissions and ensure timely approvals.
• Responsible for mandatory checks and approval process for external vendor electrical design submissions
• Manage vendor’s work quality and safety compliances
• Deliver projects within scope, budget, and timeline.

e. Integrated Facilities Management (IFM)

• Develop and implement an Integrated Facility Management model to coordinate M&E maintenance and engineering works.
• Responsible for cost saving and better streamline of repair works through IFM management.
• Enhance collaboration across different discipline for seamless facility maintenance.

4.  Qualification/Experiences

• Bachelor's degree in FM/Engineering or relevant discipline.
• 5–8 years of relevant experience in facilities maintenance and management.
• Strong expertise in Electrical & Mechanical Systems maintenance.
• High level of computer proficiency; tech-savvy with an AI-driven mindset.
• Excellent problem-solving, project management, and vendor coordination skills.
• Strong communication and leadership abilities.
• Innovative thinker with a passion for leveraging technology in facilities management.
• Results-oriented with a focus on energy efficiency and sustainability.
• Ability to work independently while collaborating effectively with cross-functional teams.
• Work Experience in Manufacturing Industry environment is preferred. 

We are seeking a mission-oriented and proactive Maintenance, Repair and Overhaul Engineer to be a member of our Maintenance, Repairs, Overhauls (MRO) – Engineering team to ensure the smooth functioning of our engineering, quality and reliability processes supporting Ground Support Equipment (GSE) maintenance operations at our customer’s premises, SATS Pte Ltd. You will play a key role in maintaining operational reliability, troubleshooting issues, engaging the customer in technical/engineering issues, and implementing process improvements to enhance efficiency and performance.

You will report to the Operations Manager onsite at SATS Maintenance Centre (SMC) at 34 Changi North Crescent S(499614) based on a 5-day work shift (Monday to Friday), and professionally report to Head MRO-Engineering Department at the company HQ (for support of hydraulic, mechanical and electrical technical matters), with the following responsibilities:

- Troubleshoot, analyse, and resolve technical issues utilizing practical fault tree analysis methodologies to minimize GSE downtime.

- Conduct failure mode analysis and recommend enhance maintenance scheme to improve GSE reliability.

- Communicate with the customers on troubleshooting, failure mode and corrective/preventive actions on technical defects.

- Prepare technical report and presentation deck for submission and presenting to the customer when required.

- Develop, review, and update technical documentation including maintenance manuals, repair procedures, and engineering change requests.

- Perform spare parts obsolescence management which include identifying obsolete spare parts and mitigating risk through monitoring, alternative parts identification and build safety stocks.

- Collaborate closely with operations, quality assurance, and supply chain teams to optimize maintenance schedule planning.

- Respond to urgent technical issues, emergencies during off-office hours and weekends when necessary.

- Ensure compliance with safety, security, and regulatory standards.

Job Requirements:

- Bachelor’s degree in mechanical, electrical, mechatronics, automotive, or related engineering with at least 2 years of working experience OR Diploma in mechanical, electrical, mechatronics, automotive, or related engineering with at least 6 years working experience in automotive, GSE or related field.

- Proven experience in maintenance operations, engineering, or related roles.

- Strong problem-solving, troubleshooting, and analytical skills.

- Excellent communication (written and verbal) and teamwork abilities.

- Excellent collaborative and innovative team culture.

- Conversant in Microsoft office skills: Words, Excel, and Power Point.

- Able to read and understand schematics diagrams (mechanical and hydraulic, electrical is a plus).

- Familiarity with CAD software tools, SolidWorks and hydraulic system software simulation tools is a plus.

1. Ensure Maintenance Key Performance Indicators (KPIs) — including MTBF, MTTR and MWT — for production lines consistently meet or exceed set targets.
2. Execute all relevant activities to achieve departmental KPIs (S,Q,D,C), while driving continuous improvement through realistic goal setting in collaboration with the team.
3. Lead or support root cause analysis using structured methodologies such as Fishbone Diagram, Why- Why, Is/Is not analysis.
4. Ensure all maintenance-related content and documentation reflect the most current data and insights to support informed decision-making and continuous process optimization (PDCA, SPL, OCAP, PSS.PFMEA,CP)
5. Actively participate in Value Stream Daily Leadership Review (DLR) and MyKATA sessions to align with operational priorities and drive engagement.
6. Contribute meaningfully to Value Stream Continuous Improvement Projects (CIP) on a quarterly basis, supporting long-term performance enhancements.
7. Perform troubleshooting and repair of for equipment related issues involving mechanical, electrical and PLC automation systems
8. Collaborate closely with process owners and other stakeholders to resolve quality issues, technical issues and implement improvement initiatives effectively.
9. Train, coach, and develop technician technical know-how to independently and effectively handle assembly station troubleshooting and sustainment activities.
10. New project early involvement to evaluate equipment performance and TPM readiness with technical analysis for rational decision justification. Manage and ensure timely preparation and uploading of all maintenance-related manufacturing documents prior to operational release.
11. Participate actively in TEF departmental initiatives such as Lean After Lean, Digitalization and Automation Projects, and BPS-TPM activities.
12. Carry out any other duties as assigned by the immediate superior, ensuring flexibility and commitment to team and organizational goals.

Workshop Technician role reporting to Operations Manager performs critical Testing, Repair and Troubleshooting of Flight Control Actuations ensuring that final products are safe and meet customer expectations while keeping the repair process as effective and cost-efficient as possible.

Responsibilities include:

· Test, Repair and Troubleshooting Tasks

· Shop Process Control and Monitoring

· Safety Management and Human Factors

· Documentation and Data Input

· Preventive Maintenance of Equipment

· Continuous Improvement Initiatives

Experienced level position with candidates undergoing extensive training and qualifications. Diploma or NITEC in an Aerospace/Aviation science or engineering discipline. Aviation background and experience preferred, aviation regulatory papers a plus.

• Analytical skills – need to be able to spot problems quickly and find the underlying causes so changes can be made
• Critical thinking – once problems are identified, solutions and improvements must be found. This might involve thinking about a process, procedure or problem in a completely new way.
• Attention to detail – as the people responsible for the technical work performed, as well as the people who notice and report on problems, every detail must be noticed and acted upon when necessary
• Numerical skills – statistical analysis and data analysis
• Communications skills – strong written and verbal communication skills are key. Must be able to relay potentially complex ideas to a wide range of audiences – both in personal consultations but also through company SOPs and technical documentation
• Team working skills – working as part of the operations team, and in close coordination with other teams throughout the facility (as well as potential for interaction with suppliers and customers)

Jobscope:

• Performs corrective and preventive maintenance for site equipment which includes process and utility equipment.
• Execute maintenance and repair work orders by adhering to maintenance SOPs and Work Instructions (WI).
• Apply LOTO where applicable and perform maintenance jobs on static and rotating equipment according to job plans or Work Instruction (WI).
• Carryout and coordinate annual or routine utilities shutdown, startup, swing over and equipment servicing and inspection.
• Promptly identify, provide troubleshooting and diagnostic of equipment failure to determine the root cause and perform immediate corrective actions with minimum supervision.
• Ensure that all work orders are completed and updated timely in computerized maintenance management system (CMMS).
• Participate and contribute to plant and equipment improvement efforts to improve reliability and availability of equipment.
•  Maintain high level of EHS, GMP compliance and good housekeeping throughout maintenance activities.
• Coordinate with external contractors for specialized maintenance work.
• Provide feedback on maintenance issues and trends associated with failures and root causes.
• Any other appointments assigned by Section Head.

Requirements:

• Diploma / ITC / NITEC / NTC in Mechanical or Mechatronics with 5 years of experience in maintenance or engineering field with industrial experience.
• Work experience in Pharmaceutical or Petrochemical industry is preferred.
• Specific maintenance knowledge, hands-on experience and simple operation knowledge in process equipment such as filter dryer, centrifuge, single cone dryer, glasslined reactors, temperature control unit etc. will be key consideration.
• Familiarity with process equipment’s instrument such as temperature, pressure, level, flow, RH, analyzers, pneumatic system and others (e.g. Sensors, indicators, recorders, transmitters, transducers, control valves, annunciators, pH and conductivity meters) will be advantageous.
• Welding skill will be an added advantage.
• Always work towards ‘Right First Time’ mindset to prevent rework or property damage that can jeopardize maintenance operation cost or manufacturing schedule.
• Ability to prepare report or Excel tables in MS Office and complete workorders in Computerized Maintenance Management System (CMMS)
• Communicates in a clear and unambiguous manner

To apply, please visit www.gmprecruit.com

To learn more about this opportunity, please contact Fiona Koh; fiona.koh@gmprecruit.com

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Fiona Koh| Registration No: R11092393

Key Roles and Responsibilities

• To troubleshoot and maintain/service security systems at clients’ premises
• Attend to fault calls during/after office hours
• Support Maintenance Lead to upkeep Clients’ security system inventory list and maintenance spares
• Support Maintenance Lead to liaise with clients, integrated facility management representatives and trade contractors so as to facilitate to carry out work at clients’ premises
• Liaise closely with clients, integrated facility management representatives on all service/maintenance related issues to achieve optimal results.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act.
• Perform any other technical tasks as required including new installations, A&A, HOTO, T&C and equipment replacement etc

Requirements

• Diploma/Higher Nitec/Nitec in Engineering/IT or relevant working experience in the related field
• Hands on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems, CCTV systems and Electronic Key Management System.
• Additional knowledge in hardware configuration, System Networking and integration with third-party systems will be an advantage
• Must be a team player,Independent and willing to take ownership and Pro-active in Problem solving
• Driving License (Car or Motorbike) – Preferably if candidate possesses its own vehicle
• Singapore Citizens are preferred
• Work Location is at 3 Shan Road/Clients’ premises
• 5 days work week
• Require to perform rotational standby duties
• Experience Candidate will be considered for Maintenance Engineer
• Fresh Graduates keen to seek a career path in security system are welcome to apply as a Maintenance Technician

Role- Senior Technician and Engineer.

Applicant need to able to operate lens grinding machine and experience working in production environment.

Able to fit ophthalmic lenses on spectacle frame - type rimless, rimlon and full frame. Experience in operating Nidek and MEI grinding machine is a must. understand and able to do color tint on lenses will be added advantage. Need to work overtime and require to do minor repair of machine.

Job description

About Gain City

At Gain City, we deliver expertise and quality solutions in air-conditioning, home appliances and consumer electronics. Established in 1981, Gain City is a trusted household name in Singapore. We take pride in our strong customer focus, innovative spirit and commitment to service excellence. With a dynamic workforce and a network of stores and service centres island wide, we offer a vibrant and growth-oriented environment where employees are empowered to thrive, take ownership and make a real impact.

About the Role

The Maintenance Engineer is responsible for the overall performance, reliability, and continuous improvement of the Automated Storage and Retrieval System (ASRS) within GAIN CITY warehouse. The role involves managing system maintenance, troubleshooting complex technical issues, coordinating with vendors, and supporting automation enhancements to ensure efficient and uninterrupted warehouse operations. The role may also require work at height during inspection, maintenance, or troubleshooting of ASRS equipment and racking structures.

Key Responsibilities

• Oversee the operation, maintenance, and performance of the ASRS system and related warehouse automation equipment.

• Diagnose and resolve complex mechanical, electrical, and system faults affecting ASRS operations.

• Plan and implement preventive and corrective maintenance programs for ASRS equipment.

• Coordinate with automation vendors, system integrators, and contractors for maintenance, repairs, and system upgrades.

• Monitor system performance and analyse data to identify opportunities for operational improvement and optimisation.

• Support system testing, commissioning, and integration with Warehouse Management System (WMS).

• Lead troubleshooting during system breakdowns to minimise operational downtime.

• Develop and maintain technical documentation, maintenance procedures, and system reports.

• Ensure compliance with Workplace Safety & Health (WSH) regulations and company safety policies.

• Provide technical guidance and training to ASRS technicians and operators.

• Perform inspection and maintenance activities at height when required, using proper safety equipment and following approved Work at Height (WAH) procedures.

Qualifications and Requirements

• Degree / Diploma in Mechanical Engineering, Electrical Engineering, Mechatronics, Automation Engineering, or related field.

• 3–5 years of experience in warehouse automation, ASRS systems, or automated material handling systems such as shuttle systems, conveyors, and robotic systems

• Strong knowledge of automation systems, controls, sensors, motors, and conveyors.

• Experience working with Warehouse Management Systems (WMS) or system integration will be an advantage.

• Familiarity with operating boom lift / scissor lift in warehouse or industrial environments will be an advantage.

• Ability to troubleshoot mechanical, electrical, and automation system faults.

• Familiarity with Work at Height (WAH) safety requirements in warehouse or industrial environments.

• Manage Work-at-Height Certification

What We Offer

At Gain City, we are committed to the growth and development of our employees. You will be offered learning and development opportunities within a collaborative, forward-thinking and growth-oriented environment. Competitive remuneration and benefits will be provided based on experience and performance.

Join Our Team

If you are passionate about logistics excellence, operational efficiency and leading a motivated team, apply now to join our growing organisation!

Job summary

Maintain and optimize ASRS systems to ensure smooth, efficient warehouse operations daily.

Key selling points

• Hands-on role with advanced automation (ASRS systems)
• Stable industry leader with strong growth opportunities

Company location at Tuas, transport provided islandwide MRT locations.

Responsibilities:

• Perform preventive and corrective maintenance,inspections, and troubleshooting on DP-area equipment to ensure reliableoperations.
• Support equipment installation, commissioning, FAT/SAT,IOQ, and start-up activities, including resolving technical issues.
• Handle breakdowns, support audits, and assist indeviation investigations, CAPA, change controls, and risk assessments.

Requirements:

• Diploma/Degree
• 2 years with pharmaceutical industry
• Comfortable with shift work

Kindly email your resume in a comprehensive Word formatto jacqueline.goh@talentvue.com.sg

We regret to inform that only shortlisted candidates will be notified.

Please be informed that by applying for the advertisedposition, the candidate is considered to have given their consent for us tocollect, utilize, or disclose their personal information for the purposesrelated to the services we provide.

Jacqueline Goh

EA License Number: 22C1430

Registration Number: R1326664

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Cloud & Data Centre Solutions

ST Engineering Cloud and Data Centre Solutions Pte Ltd provides all aspects of cloud management, services, and solutions, from initial setup and migration to ongoing operations and optimization. Services include engineering works to design, build and provide facility management service for mission critical environments such data centers, disaster recovery, and business continuity sites.

Together, We Can Make A Significant Impact

This position involves maintaining and operating equipment, troubleshooting issues, conducting preventive maintenance, and ensuring facility safety & security. Responsibilities include participating in emergency response activities, documenting procedures, and performing various maintenance tasks. The individual will need to work effectively as part of a team and communicate professionally with colleagues and supervisors.

Be Part of Our Success

• Resolve identified engineering issues with equipment to keep downtime to minimum
• Active participation in first level troubleshooting / root cause isolation / recovery action on all reported incidents and escalate incidents to supervisor
• Perform planned preventive maintenance (PPM) / Reactive Maintenance (RM) / Service order (SO) to minimize equipment downtime
• Documentation of standard operating procedures / Checklist of equipment Tasks
• Work as a team to monitor and perform facility inspections and report on condition affecting operations
• Performs repairs, maintenance and installation.
• Conduct routine monitoring and spot checks of all building equipment and systems
• Involve in company’s Emergency Response team (ERT), first aid and environmental health & safety (EHS) activities
• Ensure calls are answered and emails are responded in a timely, efficient and professional manner
• Perform any other duties assigned and assist in ad-hoc tasks by supervisor or manager
• Contributes to team effort by accomplishing related results as needed.
• Ensure proper handover and takeover during shift changes
• Lead a team of fellow FM Engineers
• Specialise in Mechanical and/ or Electrical works

Qualities We Value

• Computer literate with the ability to compile and submit daily reports.
• Experience and with understanding mechanical and electrical field / engineering & building services industry will be a plus
• Able to read architectural, structural, mechanical and electrical as built will be a plus
• Able to commit to 12 hours rotating shift work that includes day, night and weekends

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Machine Learning / GenAI Engineer

Domain: Smart Manufacturing & AI Solutions

Role Overview

We are hiring ML/GenAI Engineers to design and deploy AI solutions for smart manufacturing. The role focuses on improving production efficiency, reducing downtime, and enabling Industry 4.0 capabilities using machine learning and generative AI.

Key Responsibilities

• Build ML models for predictive maintenance, anomaly detection, and process optimization 
• Develop GenAI applications (chatbots, automated reports, simulations) 
• Create data pipelines for IoT, sensor, and MES data 
• Integrate AI solutions with factory systems for real-time insights 
• Apply AI/vision techniques for quality control and defect detection 
• Monitor model performance and automate retraining (MLOps) 
• Collaborate with engineering and IT teams; present insights via dashboards 

Required Skills

• Atleast 3 years of experience in Software and IT arena
• Strong programming in Python, R, or Java 
• Experience with TensorFlow, PyTorch, or Scikit-learn 
• Knowledge of MLOps tools (MLflow, Docker, Kubernetes) 
• Understanding of manufacturing/MES systems and industrial data 
• Experience with predictive analytics and real-time data processing 
• Solid data engineering skills (SQL/NoSQL, IoT datasets, cloud platforms) 
• Good problem-solving and communication skills 

Nice to Have

• Experience in Industry 4.0 / smart factories 
• Exposure to GenAI/LLMs or computer vision