Total 485 structural engineer job vacancies in Art / Design / Entertainment category in The Philippines

Description:

• You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

• Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog
• Experience in ARM or RISC-V processor system
• Experience in embedded C and assembly code programming
• Experience in analysis of power, timing and area
• Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)
• Disciplined, quality-minded, and highly driven for excellence
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 8 years of relevant experience
• Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus
• Experience in system modelling and simulation using emulator and SystemC is a plus
• Experience in UVM verification methodology is a plus
• Passionate and strong in general programming is a plus

Key Responsibilities Key Responsibilities

RTL Design and Verification

• Develop synthesizable RTL in Verilog/SystemVerilog for custom on-chip test, monitoring, and diagnostic IP targeting analog and mixed-signal failure detection.
• Design and verify digital logic blocks such as test controllers, sequencing logic, sensor/interface control logic, measurement and monitoring logic, data capture and comparison logic, and failure detection and reporting logic.
• Build clean register and bus-connected interfaces, for example APB, AHB, or AXI-lite based control and status paths, to enable firmware interaction and subsystem integration.
• Develop testbenches, assertions, checkers, and block or subsystem-level verification environments to validate controller behavior, detection logic, configuration programming, fault response, and status reporting.
• Plan and execute functional verification for normal, corner, negative, and fault-injection scenarios, with adequate coverage of critical diagnostic behaviors.
• Collaborate with analog and mixed-signal designers to create or use behavioral models, stubs, and interface abstractions for realistic verification of failure mechanisms and observability paths.
• Debug RTL and simulation issues through waveform analysis, assertion-based checks, root-cause investigation, and close interaction with integration and product teams.
• Ensure the RTL is modular, reusable, timing-aware, synthesis-friendly, and scalable for integration across multiple SoC derivatives.

SoC Integration

• Integrate custom DFT / diagnostic IP into SoC subsystems and system-level test architecture with proper consideration for clock/reset structure, interrupt handling, and status visibility.
• Work closely with SoC integration and DFT teams to ensure compatibility with system test infrastructure, production test flows, diagnostic mechanisms, and firmware control requirements.
• Support integration readiness by addressing CDC, reset interactions, timing considerations, low-power implications, and implementation handoff requirements.

Cross-Functional Collaboration

• Work closely with digital, analog, and mixed-signal design teams, DFT engineers, SoC architects, and product/test engineering teams throughout the design and validation cycle.
• Translate analog or mixed-signal failure modes into robust digital detection logic suitable for on-chip test, screening, and diagnosis.
• Contribute to technical discussions on architecture tradeoffs, observability strategy, and practical silicon debug readiness.

Required Qualifications

• Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field, with 5–7 years of relevant experience.
• Strong hands-on experience in RTL design using Verilog/SystemVerilog.
• Practical experience in RTL verification, simulation, and debugging methodologies.
• Solid understanding of ASIC / SoC design flow including coding, simulation, synthesis, and integration.
• Good foundation in digital design concepts such as FSM design, datapath design, bus protocols (AXI/AHB/APB), clock-domain handling, reset strategy, and timing considerations.
• Experience working in complex SoC environments with cross-functional teams.

Preferred Qualifications

• Experience developing control, monitoring, or diagnostic IP associated with analog or mixed-signal subsystems.
• Exposure to behavioral modeling or interface definition for analog and mixed-signal verification use cases.
• Familiarity with subsystem-level integration, production screening considerations, and silicon debug support.
• Working knowledge of scripting or automation for verification, regression, or design productivity is an advantage.

Responsibilities

1. Develop design requirements for an NPU based on system-level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug any issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 5+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on experience in digital design is a must.
4. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
5. Experience in synthesis, with analysis of power, timing and area.
6. Disciplined, quality-minded, and highly driven for excellence.
7. Excellent team player and good communication skills.
8. MSEE/BSEE in Electrical Engineering or Computer Engineering.
9. Understanding of convolution operator and number system is required.
10. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
11. Experience in UVM verification methodology is a plus.
12. A plus to have SoC design experience.
13. Experience with optimizing micro-architectures for low-power and low-area is a plus.
14. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
15. Experience with past design experience with NPU / GPU / DSP design is a plus.
16. Experience with ARM or RISC-V processor systems is a plus.
17. Passionate and strong in general programming is a plus.

Responsibilities

• Perform product design, prepare production drawing and must have sound knowledge of CNC programming.
• To schedule and plan all the orders including doors, locks and other products to meet project delivery schedule stipulated by the Projects and Sales Dept.
• To plan, forecast, optimize and organize various resources and provide technical support for the site installation work to achieve the quality and efficency for te project.
• To review and maintain quality assurance processes, in-process till finished product and installation quality control.
• To review and make improvement to product designs, process flows and QA/QC procedures, upkeep all quality manuals and SOPs, including reviewing productivity and efficiency of line and production of design and cutting drawings.
• To review periodically with the QC/QA engineer of the OEM to ensure that production are complying with the company quality standard.
• To assist in other business activities as and when assigned.

Requirements

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma, Bachelor's Degree/Post Graduate Diploma/Professional Degree in Mechanical Engineering.
• At least 5 Years of working experience in the related field of sheet metal products and fabrication.
• Proficient in 3D Modeling and AutoCAD.
• Proficient in SolidWorks.
• Experienced in design and calculation for Sheet metal products is a must for this position.

Leadtop Technology Pte Ltd is a chip design company based in Singapore. The Company has strong R&D capabilities and the core technical team members all have numerous years of experience in the semiconductor industry. We have rich industry experience and deep practical accumulation in IC design and business management.

Job Description:

1. Works with the front-end design team to complete the chip floorplan , clock architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 2 years of work experience in the digital backend design field. Tapeout experience at advanced technology is preferred.

3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be a plus.

4. Strong communication ability, good confidence and self-motivation, good teamwork spirit.

5. Salary is negotiable for excellent candidates.

Responsibilities:

1. Develop design requirements for an NPU based on system-level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug any issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 8+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on experience in digital design is a must.
4. Preferably has lead a team of at least 3 to 4 people in the past at the capacity of a design lead.
5. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
6. Experience in synthesis, with analysis of power, timing and area.
7. Disciplined, quality-minded, and highly driven for excellence.
8. Excellent team player and good communication skills.
9. MSEE/BSEE in Electrical Engineering or Computer Engineering.
10. Understanding of convolution operator and number system is required.
11. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
12. Experience in UVM verification methodology is a plus.
13. A plus to have SoC design experience.
14. Experience with optimizing micro-architectures for low-power and low-area is a plus.
15. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
16. Experience with past design experience with NPU / GPU / DSP design is a plus.
17. Experience with ARM or RISC-V processor systems is a plus.
18. Passionate and strong in general programming is a plus.

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 3+ years of Digital Design and verification related experience
• Experience / knowledge in CMOS Image Sensor and Image Signal Processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Results oriented and adaptable to changes

• Design and develop automation and semiconductor equipment modules, optimizing performance, yield, and manufacturability using Design of Experiments (DOE).
• Lead the product development lifecycle from concept, design, and prototyping through validation and transition to high-volume manufacturing.
• Collaborate with Engineering, Integration, Modules, and cross-functional teams to troubleshoot technical challenges and ensure alignment throughout project execution.
• Ensure designs are manufacturing-ready, supporting integration into production with a focus on scalability, reliability, and cost efficiency.
• Define performance metrics, monitor development progress, and prepare technical reports and documentation for continuous improvement.

Requirements:

• Degree in Mechanical/Mechatronics Engineering or equivalent
• At least 3 years of experience in automation or semiconductor equipment design, with knowledge of high-precision machine design.
• Proficient in 3D CAD software and capable of producing detailed mechanical drawings with GD&T understanding.
• Strong problem-solving skills with the ability to collaborate across teams and support manufacturing integration.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Leadtop Technology Pte Ltd is a chip design company based in Singapore. The Company has strong R&D capabilities and the core technical team members all have numerous years of experience in the semiconductor industry. We have rich industry experience and deep practical accumulation in IC design and business management.

Job Description:

1. Works with the front-end design team to complete the chip floorplan , clock architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.

3.Researches the physical design methodology of advanced process nodes, and improvise the automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 5 years of work experience in the digital backend design field. Hands-on project experience is required. Tapeout experience at advanced technology is preferred.

3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be a plus.

4. Strong communication ability, good confidence and self-motivated, good teamwork spirit.

5. Salary is negotiable for excellent candidates.

• Lead engineering teams to design and develop semiconductor equipment modules, ensuring integration into full machines through structured design reviews, comprehensive documentation, and thorough issue investigations.
• Implement Continuous Improvement Programs (CIP) to extend product lifecycle, enhance competitiveness, and improve gross margins, while ensuring reliability and feasibility through rigorous testing and verification.
• Support Sales by reviewing specifications, evaluating costing, and assisting in product assessments; respond to sales and service enquiries with accurate technical input.
• Ensure product performance on-site, resolve technical field issues across Sorters, Laser Mark, and Scan product families, and deliver effective solutions to maintain customer satisfaction.

Requirements:

• Degree or Master’s in Mechanical Engineering or equivalent. At least 5 years of experience in automation or semiconductor machine design.
• Strong technical background in high‑precision, high‑speed semiconductor equipment, with proficiency in Creo or SolidWorks.
• Proven leadership and project management skills, with the ability to coach, motivate, and solve problems systematically.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Job Responsibilities:

- Responsible for projects of Design Department.

- Plan, allocate and assign jobs to subordinates and accountable for project result.

- Lead, guide and supervise subordinates.

- Check and approve design drawings and documents produced by subordinate

- Responsible for the effective implementation and control of the Design Control functions and quality system of the total Quality Management System.

- Prepare material requisition lists for job requirements.

- Plan and design electrical switchboards, consoles and control panels according to customer's requirements and standards.

- Prepare approval drawings, shop drawings, final drawings / documents, short circuit calculations, instruction manuals as required for submission to clients and shopfloor production.

- Co-ordinate with clients and consultants on the technical requirements. Attend technical discussions with clients and consultants when required.

- Feedback to Sales & Marketing Department for changes of technical requirements by clients for claims of additional costs and time.

- Check and follow-up on design and shop drawings with production departments.

- Assist and advise Sales & Marketing Department on technical matters; provide technical backup for securing of contracts.

- Institute work improvements to bring cost savings and reduce wastage for the Company.

- Carry out other responsibilities as and when assigned by the superiors.

- Follow the procedures of the Quality Management System for effective implementation and control.

Job Requirements :

- Diploma in Electrical Engineering or equivalent;

- 5 years of relevant working experience;

- Knowledge of switchboards / panels

- Good knowledge of DC-grid power system and switchboard

Job Description:

• Lead and manage the Structural scope from design development to construction stage.
• Review and coordinate Structural drawings with Archi, M&E, and specialist trades to ensure buildability, constructability and minimize clashes.
• Provide value engineering proposal from the tender stage throughtout the contruction stage.
• Understand and assist project manager to set up the rebar ratio discipline and guideline, liaise with consultant to implement and control the rebar ratio.
• Act as main point of contact between the design consultants and construction team.
• Attend and lead design coordination meetings, resolving technical and design issues promptly
• Provide technical guidance during construction to ensure design quality and intent are maintained.
• Work with site team to resolve discrepancies between design and site conditions.
• Oversee submission of structural shop drawings, material approvals, and as-built drawings;
• Coordinate with precaster to produce the precast drawings, including but not limited to PPVC, PBU, APCS drawings.

Job Requirements

• Education: Degree in civil engineering, or equivalent.
• Experience: Minimum 5–10 years of relevant experience in structrual coordination or design for residential projects in Singapore;
• Knowledge: Strong understanding of Singapore building codes, BCA regulations, authority submission process, and industry standards.
• Familiar with precast and advanced construction methods.
• Proficient in reading and interpreting drawings and specifications.
• Strong coordination, communication, and leadership skills.
• Ability to resolve design and site issues effectively.
• Competent in BIM / AutoCAD and related coordination tools

Responsibilities:

• Prepare material requisition lists for job requirements.

• Design electrical switchboards, consoles and control panels accord to customer's requirements.

• Prepare approval drawings, shop drawings, final drawings, circuit calculations, instruction manuals

• Coordinate and discuss with clients/consultants on technical requirements.

• Feedback to sales on changes of technical requirements by clients for claims/costs and time.

• Check/follow-up on design and shop drawings with production departments.

• Develop and improve on design of electrical switchboards, consoles and control panels.

• Follow procedures of design control, documentation and data control, and quality system.

• Diploma in Electrical with 1 year design experience. Graduate welcome to apply.

• Proficient in AutoCad and Solidwork
  
  

  
  Interested applicants, send in your updated resume by clicking “Apply Now”.

  Lin Weikang
  EA Personnel No: R21102570
  EA License No: 23C1894

Job Requirements

1)To Work as lead Engineer for Oil & Gas Project

2)Leading a Team of Electrical Engineers in Preparation & Review of Load lists, Single Line diagram of PCC, PMCC, MCC, DB's, Equipment Sizing Calculation, System Study through ETAP (Version 19.1) and Preparation & Review of Layouts like Hazardous Area classification, Lighting Layout, Cable and Power Layout, Substation Equipment layout, Earthing & Lightning protection Layout.

3)Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies

4)Preparation, Monitoring and Control Engineering Document Control List and expedite for delay/ approvals/resolution of open issues

5)Review and Ensures that all works are carried out in accordance with project specification. Maintain Design integrity and quality within the Project Engineering Team

6)Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.

7)Preparation of Material Requisition, Specifications, Technical Bid Evaluation for Electrical works.

8)Preparation and Compliance for Engineering Audit Requirements.

9)Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.

10)Technical assistance to construction activities and attending to Site Queries.

11)Reviewing Vendor Drawings for Transformers, Switchgears, Cables, Distribution Boards, Junction Box, LCS, Motors etc.

12)FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.

13)Coordination with PMC / QP and Construction Coordination.

14)Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness and correctness in works

15)Inspecting various equipment like LV & MV Bus duct, LV & MV Switchgear, Cables, Transformer, AC / DC UPS

16)Field Engineering Support Activities to complete the task in accordance with the project schedule.

17)To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

18)To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Software Requirements

ETAP, DIALUX, Auto cad, MS Excel, MS Word

Employee Name, Signature and Date

Qualification

Preferably Bachelors’ Degree in Electrical Engineering

Experience

Preferably Minimum 20 years of experience