Total 419 qa engineer job vacancies in Art / Design / Entertainment category in The Philippines

Electrical Engineer

• Office: Jalan Besar / Lavender MRT
• Project Site: TUAS areas (Transport provided for designation MRT station to site office)
• Junior: $4000 to $4500, Senior: $4500 to $6000
• Working days: Mon to Fri 8/8.30am to 5/5.30pm, Sat may need works depends on site (if works 8 hours can claim allowances)

Requirements

• Diploma or Degree in Electrical Engineering or equivalent.
• At least 3-5 years relevant experience.
• Familiar with Singapore electrical standards, codes and PUB requirements.
• Able to interpret electrical drawings and technical specifications.
• Experience in the construction industry and Building Management System (BMS) projects is preferred.
• Proficient in MS Office; AutoCAD knowledge is an advantage.

Job scopes

• Coordinate and supervise electrical works for retrofitting, A&A, infrastructure, industrial, water treatment, or wastewater treatment projects.
• Interpret and review electrical drawings, technical submissions, method statements, and material submissions to ensure compliance with project requirements and applicable standards..
• Coordinate with consultants, contractors, subcontractors, and project teams to ensure smooth project execution and resolve technical issues.
• Monitor and oversee installation, testing, and commissioning of electrical systems, including LV power distribution, switchboards, MCCs, control panels, and ELV systems.

Interested applicants kindly submit your resume through here or Whatsapp +65 9019 3218 (Joevy), and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Tan Yu Jing Reg No: R26161199

The Supreme HR Advisory Pte Ltd EA No: 14C7279

JOB-00548

What You’ll Do (Key Responsibilities)

• Advanced Layout Design: Architect multi-layer, high-density PCBs for complex satellite communication equipment, managing critical constraints like signal integrity (SI), power integrity (PI), and thermal management.

• RF & High-Speed Routing: Execute impedance-controlled routing, grounding strategies, and microwave-frequency layouts for critical RF components (SSPAs, BUCs, LNAs).

• End-to-End Execution: Drive the entire ECAD workflow using Altium Designer (or equivalent)—from schematic capture and library management to generating production-ready manufacturing packages (Gerber, ODB++, pick-and-place).

• Simulation & Validation: Utilize RF simulation tools (HFSS, AWR) to optimize board performance and minimize EMI/EMC risks before fabrication.

• Lab Testing & Bring-Up: Roll up your sleeves in the lab to support prototype assembly, board bring-up, debugging, and root-cause analysis using spectrum analyzers, network analyzers, and oscilloscopes.

• Design for Excellence (DFX): Partner with manufacturing teams to conduct DFM/DFA reviews, ensuring seamless production scaling and strict adherence to IPC standards.

What You Bring (Qualifications & Experience)

• Education: Bachelor’s or Master’s degree in Electrical/Electronics Engineering, Telecommunications, or a related discipline.

• Experience: 3–5+ years of proven experience in multi-layer PCB design, with a strong emphasis on RF, wireless, or telecommunications hardware.

• ECAD Expertise: High proficiency in Altium Designer, Cadence Allegro/OrCAD, or Mentor Graphics.

• Technical Depth: Deep understanding of analog, digital, mixed-signal, and high-speed digital layout techniques (controlled impedance, differential pairs).

• RF Component Familiarity: Working knowledge of RF communication building blocks like Transceivers, Down-Converters, BUCs, and LNAs.

• Lab Skills: Hands-on experience troubleshooting physical hardware using RF lab equipment (VNA, Spectrum Analyzers).

• Standards: Familiarity with IPC guidelines, EMI/EMC compliance, and aerospace/defense reliability standards.

Please submit your updated resume in Word format by using the Apply Now Button.

We regret that only shortlisted candidates will be notified.

Email resume to che••••••••••@peopleprofilers.com

People Profilers Pte Ltd, 20 Cecil Street, #08-09 PLUS Building, Singapore 049705

Tel: 69•• •744

Posting Personnel: Ding Xin Er

EA Licence Number: 02C4944

Registration Number: R22106669

Electrical Engineer

• Office: Jalan Besar / Lavender MRT
• Project Site: TUAS areas (Transport provided for designation MRT station to site office)
• Junior: $4000 to $4500, Senior: $4500 to $6000
• Working days: Mon to Fri 8/8.30am to 5/5.30pm, Sat may need works depends on site (if works 8 hours can claim allowances)

Requirements

• Diploma or Degree in Electrical Engineering or equivalent.
• At least 3-5 years relevant experience.
• Familiar with Singapore electrical standards, codes and PUB requirements.
• Able to interpret electrical drawings and technical specifications.
• Experience in the construction industry and Building Management System (BMS) projects is preferred.
• Proficient in MS Office; AutoCAD knowledge is an advantage.

Job scopes

• Coordinate and supervise electrical works for retrofitting, A&A, infrastructure, industrial, water treatment, or wastewater treatment projects.
• Interpret and review electrical drawings, technical submissions, method statements, and material submissions to ensure compliance with project requirements and applicable standards..
• Coordinate with consultants, contractors, subcontractors, and project teams to ensure smooth project execution and resolve technical issues.
• Monitor and oversee installation, testing, and commissioning of electrical systems, including LV power distribution, switchboards, MCCs, control panels, and ELV systems.

Interested applicants kindly submit your resume through here or Whatsapp +65 9019 3218 (Joevy), and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Tan Yu Jing Reg No: R26161199

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Essential Responsibilities:

Together with a team of engineers, to take on detailengineering task for water and wastewater treatment plants to fulfill business obligations, e.g., on-time delivery, satisfy contract specifications or industrial standards, and bring value to customers. Work shall include, but not be limited to, the following:

• Prepare P&IDs Drawing
• Prepare Fabrication Drawing
• Prepare Equipment Layout Drawing
• Prepare Pipe Routing Drawing -Prepare Equipment Modeling Drawing
• Perform material take off
• Liaison with the in-house design team on board to meet engineering deliverables.
• Perform value engineering to drive costs down.
• Support business initiative to bid and win jobs as required.
• Support the Project Management/ Construction Team on construction activities as required.
• Support the Commissioning Team on commissioning activities as required.

Qualifications/Requirements:

• At least 3 years of working experiences
• Highly motivated and able to work under pressure
• Familiar with Google Drive, Google Meet, MS SharePoint, MS Teams, and Navisworks
• Familiar with Autodesk Construction Cloud, AutoCAD, AutoCAD Plant 3D, and REVIT
• Ability to operate SolidWorks and SAP is a plus point

Brunel International S.E.A Pte. Ltd.

UEN No:199603098R

EA License No: 16S8067

JasonAustria - R1217761

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Design Engineer (Construction)
• Working Location: Tuas
• Working Hours: 5 days (Mon – Fri, 8.00am – 5.30pm)
• Salary Package: Basic salary up to $4,500 + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Carry out detailed analysis and design of civil and structural parts for various projects
• Work with other teams to develop effective and practical design solutions
• Prepare technical drawings, reports, and specifications to support project work
• Ensure all designs follow relevant codes, regulations, and safety standards
• Provide support on site during construction and help solve any issues that arise

APPLY NOW!!!

• Bachelor’s degree in Civil or Structural Engineering, or relevant discipline
• 5 years of experience in specialist building works
• Skilled in engineering design software such as ETABS, SAP2000, SAADPRO, and AutoCAD
• Knowledge of Singapore’s structural codes and regulations

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #76727 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Position Overview

CT Singapore is seeking enthusiastic and detail-oriented individuals to join our growing team as Video Technicians or Engineers. These role supports both on-site event production and in-house equipment maintenance and logistics.

Whether you're an entry-level technician passionate about starting a career in the live events industry or a seasoned Video engineer with strong hands-on technical experience, this role offers a dynamic and rewarding work environment.

You’ll be part of an energetic team delivering high-profile live events and conferences across the region, working closely with Project Managers and Senior Engineers to ensure high-quality execution. Candidates must be team players with a proactive attitude, willing to work flexible hours and travel as required.

Key Responsibilities

On-Site (Event) Duties

• Setup, operate, and dismantle technical equipment for events:

-Video Technician/Engineer: Projectors, LED screens, Media Server and more

• Provide real-time technical support and troubleshooting during live shows.

• Work closely with event coordinators, project managers, and clients to deliver technical solutions.

• Load/unload and transport technical equipment to/from venues safely and efficiently.

• Ensure equipment and systems are functioning optimally before, during, and after events.

• Provide on-site technical support and quick troubleshooting where necessary.

Warehouse / Base Operations

• Prepare technical equipment according to event requirements.

• Conduct quality control (QC), routine maintenance, and functional testing of equipment.

• Label and organize equipment for easy identification and fast turnaround.

• Document and report faulty or damaged equipment to the management and warehouse team.

• Manage inbound and outbound shipments, sub-rented items, and create shipping manifests.

• Maintain a clean, safe, and organized warehouse working environment.

Team Support & Growth

• Participate in hands-on training and learn from senior engineers.

• Collaborate cross-functionally with other departments.

• Contribute to continuous improvements in processes, equipment maintenance, and safety standards.

Requirements

For Entry-Level Technicians:

• Basic knowledge of video systems.

• Willingness to learn and grow in the live event industry.

• Basic computer skills and familiarity with MS Office.

• Able to work flexible hours, including nights, weekends, and holidays.

• Must be able to lift equipment and perform hands-on tasks.

For Experienced Technicians / Engineers:

• Strong technical knowledge of Video systems and live event workflows.

• Experience operating:

-Video Technician/Engineer: LED walls, Media Servers, etc

• Proven ability to handle maintenance, QC, and preparation of technical equipment.

• Previous experience managing technical equipment setups on-site with minimal supervision.

• Familiarity with equipment databases or forklift certification is a plus.

Additional Information

• This is a full-time position based in Singapore.

• Willingness to work extended hours and travel across APAC

• Candidates with a valid forklift license, Class 3/4 driving license, or prior event production experience will have an advantage.

• Career progression opportunities are available from Junior Technician to Senior Engineer and beyond.

Desirable Traits

• Strong communication skills and a team-first mindset.

• Passion for delivering flawless live event experiences.

Leadtop Technology Pte Ltd is a chip design company based in Singapore. The Company has strong R&D capabilities and the core technical team members all have numerous years of experience in the semiconductor industry. We have rich industry experience and deep practical accumulation in IC design and business management.

Job Description:

1. Works with the front-end design team to complete the chip floorplan , clock architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 2 years of work experience in the digital backend design field. Tapeout experience at advanced technology is preferred.

3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be a plus.

4. Strong communication ability, good confidence and self-motivation, good teamwork spirit.

5. Salary is negotiable for excellent candidates.

Job Description

• Industry/ Organization Type: M&E Consultancy Firm
• Position Title: Electrical Design Engineer (M&E Consultancy)
• Working Location: : East – Paya Lebar
• Working Hours: 5 Days (Monday – Friday, 8:30 AM – 6:00 PM)
• Salary Package: Basic Salary + VB
• Duration: Permanent Role

Key Responsibilities

• Build and maintain good relationships with clients, contractors, consultants, and project stakeholders.
• Follow company procedures, systems, and work processes.
• Understand M&E design concepts and explain engineering solutions clearly.
• Assist in designing, coordinating, and reviewing electrical building services systems.
• Prepare electrical drawings, calculations, specifications, schedules, and technical reports.
• Perform electrical calculations using relevant engineering software.
• Review and coordinate drawings/specifications from architects and other service engineers for proper design integration.
• Carry out investigation, technical review, and coordination for ongoing and completed projects.
• Liaise with clients, contractors, authorities, and internal teams on design and technical matters.
• Assist with authority submissions, technical documents, and project coordination when required.
• Support senior engineers to ensure work meets project requirements, codes, and standards.
• Guide students, interns, and junior engineers where required, while demonstrating professional work standards.
• Perform other duties as assigned

APPLY NOW!!!

• Degree or Diploma in Electrical Engineering.
• At least 1 year of relevant experience in an M&E consultancy firm, with exposure to ACMV, fire, or hydraulic services design.
• Experience in ACMV, fire protection, or hydraulic services coordination in an M&E consultancy environment is an advantage.
• Experience in project execution as a contractor will be considered.
• Experience in Energy Storage Systems, sustainability, resource conservation, or renewable energy is an advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #84230 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Senior Design Engineer

• Working Location: Jurong East

• Working Days: Monday - Friday

• Working Hours: 8:30am - 5:15pm

• Salary range: SGD 5,500 to SGD 8,000 monthly, 13th month, SGD 250 transport allowance

Basic Functions

Specialize in customization on electrical design work related to diesel generator sets, synchronizing system, switchgears, controllers and associated equipment. Design drawings, BOM for factory production fabricating. Preparing documentation for approval. Integration with other equipment industry, such as generators protection, switchgears, BMS, etc.

Specific Responsibilities

1. Design & produce electrical drawings, BOM and documentation for factory production

2. Understands the ISO standards and various regions standards for design considerations

3. Works closely with procurement to engage and qualify suppliers and parts

4. Works closely with manufacturing team in the electrical installations of the product and ensures smooth flow in the production line

5. Have good understanding of generator controller and alternator working concepts

6. Works closely with Industrial Solutions and sales to understand the design requirements and provide timely response to tender submission

7. Support in testing and validation of design including parameter optimization for controllers, governors, AVR, PLCs, HMI 

8. Design & Program various controllers, PLCs, HMI if necessary

9. Provides on-site and remote troubleshooting support if needed

10. Lead in continuous improvement projects to reduce costs and improve work efficiency

11. Assists in managing, training, developing and mentoring junior engineers, ensure standard engineering practice among the engineers

Qualifications / Requirements

• Degree in Electrical Engineering with 7-8 years of relevant experience; or

• Diploma in Electrical Engineering with 10-12 years of relevant experience

• Required to be skilled in SEE Electrical.

• Experience in process change management tools and methodologies

• Specialized skills or subject matter expert in electrical related field will be an advantage 

• Knowledge in PLC electrical design, controllers, generators, switchgears and transformers

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279 

My Client:

My client is a global technology company focused on advanced semiconductor and high-performance computing systems. The engineering team is dedicated to building next-generation ASIC solutions across advanced process nodes, supporting large-scale compute-intensive applications.The team operates in a highly technical and fast-paced environment, with strong emphasis on physical implementation, performance optimization, and full-chip delivery. They are currently expanding their physical design team to support growing project demands across advanced nodes.

Job Responsibilities:

• Perform end-to-end physical design implementation from netlist to GDSII for advanced ASIC projects.
• Work on key stages including floorplanning, power planning, placement, clock tree synthesis (CTS), routing, and optimization.
• Drive timing closure across MMMC scenarios, including setup/hold fixing, clock optimization, and ECO implementation.
• Conduct physical verification and signoff tasks (DRC, LVS, IR drop, EM analysis) to ensure tape-out readiness.
• Optimize power, performance, and area (PPA) through iterative design improvements.
• Collaborate closely with front-end design, DFT, and signoff teams to resolve integration and late-stage issues.
• Contribute to design methodology improvements and automation through scripting and tooling enhancements.

Job Requirements:

• Bachelor’s degree or above in Microelectronics, Electronic Engineering, or related fields.
• Understanding of physical design flow and IC development process.
• Familiarity with PnR tools such as ICC2, Fusion Compiler, or Innovus.
• Knowledge of timing analysis, power optimization, and physical verification concepts.
• Basic scripting skills (TCL / Python / Shell) for automation is a plus.
• Strong learning ability and willingness to work in advanced technology environments.

What They Offer:

• Opportunity to work on cutting-edge semiconductor projects at advanced technology nodes.
• Exposure to full-chip design flow and large-scale ASIC development.
• Competitive compensation and long-term growth opportunities.

About Us

Dada Consultants was established in 2017, with the commitment of providing the best recruitment services in Singapore. We are comprised of a dynamic head-hunting team dedicated to sourcing for highly competent professionals in IT industry. We provide enterprises with customized talent solutions, and bring talents to career advancement.

If it sounds like your next move, please don’t hesitate to apply. Kindly note that only shortlisted candidates will be contacted. Appreciate your understanding. Data provided is for recruitment purposes only.

www.dadaconsultants.com

EA Registration Number: R2197058

Business Registration Number: 201735941W. Licence Number: 18S9037

THE ROLE:

The candidate is responsible for driving advanced device development, reliability engineering, and process integration to enable robust technology development and qualification. This position plays a critical role in supporting next-generation technology exploration through close collaboration with DTCO, design, and technology teams across global sites.

THE PERSON:

This role requires a candidate with a proactive mindset and the ability to work independently, while also demonstrating strong collaboration skills within a team-oriented environment.

KEY RESPONSIBILITIES:

• Drive advanced device development and process integration activities, leveraging deep understanding of semiconductor device physics and process optimization.
• Support technology development, qualification, and ramp, ensuring robust device performance and manufacturability.
• Lead or support reliability engineering efforts, including identification and analysis of key failure mechanisms.
• Develop and maintain design guidelines for TDDB, aging, and electromigration, translating foundry reliability rules into actionable design practices.
• Collaborate closely with DTCO, design, and technology teams to optimize design–process interactions.

PREFERRED EXPERIENCE:

• 10+ years of hands-on experience in semiconductor technology development, with strong background in: Device physics, Process optimization, Reliability engineering
• Proven experience in advanced CMOS technologies (e.g., FinFET, GAA, or equivalent advanced nodes).
• Solid understanding of device reliability fundamentals and process–device interactions.
• Demonstrated understanding and hands-on experience with SPICE simulation and related scripting or programming languages.

ACADEMIC CREDENTIALS:

• Educational Qualification: Master's degree required; Doctoral degree preferred.

• Field of Study: Degree in Electrical Engineering, Materials Science and Engineering, or a related field.
  

Responsibilities

• Design and develop mechanical and hydraulic systems based on industry standards, good engineering practices and contractual requirements
• Perform design/sizing/selection/integration of steel structures, mechanical & hydraulic components
• Design and produce mechanical and hydraulic system drawings/BOM and all associate project document such as operation and maintenance manual
• Carry out function testing/troubleshooting/commissioning in factory as well as in container terminals
• Provide engineering support/advice to Sales, After-Sales and Production department and conduct user training when required

Requirements

• Degree in Mechanical or Mechatronic Engineering
• Experience in design of machines, mechanism, components and hydraulic system, preferably in heavy industries such as cranes and construction equipment
• 3D CAD design experience and ability to conduct engineering calculation and analysis according to industry standard are essential
• Knowledge in steel fabrication and machining processes will be an advantage
• Experience in design set-ups, component selection, testing and troubleshooting preferred

Responsibilities:

• Analyze product designs for manufacturability and cost efficiency (DFM).
• Develop 3D/2D tool designs using AutoCAD and SolidWorks for plastic injection molding.
• Create mold design layouts, lead design reviews, and ensure accuracy.
• Design precision molds meeting product specs and production standards.
• Manage mold projects, coordinate with teams and customers.
• Prepare bills of materials, maintain documentation for traceability.
• Participate in First-Off Tool reviews and evaluate tool readiness.
• Analyze tooling issues, identify root causes, and implement solutions.
• Develop complex mold designs for production release.
• Apply knowledge of plastics and elastomers for informed design decisions.
• Utilize 3D modeling and GD&T expertise for design precision.
• Communicate effectively with stakeholders, collaborate as a team player.

Requirements:

• Proficiency in SolidWorks, AutoCAD, and GD&T.
• Knowledge of plastic injection molding and automotive industry standards.
• Strong problem-solving skills, attention to detail, and teamwork mindset.
• 5 days' work week.

Responsibilities:

· 3 - 5 years working experiences in the construction industry with background in both consulting firms and contractor firms

· Familiar with Euro codes and structural and geotechnical software.

· Conduct design calculations complying with euro-codes, local codes of practices and project specifications.

· Check and verify temporary work designs submitted by sub-contractors.

· Analyse and interpret technical data to ensure that designs meet project requirements and specifications.

· Proficient in using Micro-station and Bentley software.

· Closely work with in-house drafting team and co-ordinate with interfacing contractors to prepare and review the shop drawings.

· Resolve design and construction issues as they arise during the project.

· Update, keep and maintain design submission records / trackers and design meeting / discussion minutes to ensure that all work is completed on time and to the required quality standards.

· Collaborating with other professionals, such as external PEs and specialists, etc., to ensure that project goals are met.

Requirements:

· Bachelor's degree recognised by PEB Singapore in Civil, Structural or in a related field;

· 3-5 years working experience in large scale infrastructure projects

· Technical and problem-solving skills and reasoning ability

· Ability to communicate effectively and clearly

· Must be self-motivated and able to work independently

About Company

Founded in 2022, XG Tech is driving the future of smart vehicles. Its mission is to empower the digital transformation of automobiles, moving from distributed computing to a centralized, cross-domain platform.

XG Tech focuses on the intelligent cockpit—the next frontier of differentiation—while seamlessly integrating advanced driving systems. By reimagining cars as mobile living spaces, XG Tech aligns with the evolving trend of vehicles becoming the “third living space.”

Role Summary

As an IC Design Engineer, you will develop and implement micro-architectures and RTL designs for complex digital IPs and SoCs. You will work across the full ASIC flow, from RTL coding to synthesis, timing closure, and validation, ensuring high-quality, efficient, and reliable designs.

Key Responsibilities

• Develop and implement micro-architecture for complex digital blocks.
• Write synthesizable RTL code in Verilog/SystemVerilog for various IPs and SoCs.
• Perform linting, CDC (Clock Domain Crossing), and low-power checks (UPF/CPF).
• Conduct logic synthesis, timing constraints generation, and timing closure support.
• Collaborate with verification engineers to define test plans and ensure design quality.
• Support pre-silicon validation and post-silicon bring-up and debug activities.
• Create and maintain technical documentation.

How you will stand out

• Bachelor’s or Master’s degree in Electrical/Electronics Engineering or a related field.
• Proven experience in ASIC design flow and methodologies.
• Strong proficiency in RTL coding using Verilog or SystemVerilog.
• Hands-on experience with synthesis, timing analysis, and scripting languages (e.g., TCL, Python).
• Knowledge of low-power design techniques and power integrity issues is a plus.
• Familiarity with industry-standard EDA tools from Synopsys, Cadence, or Siemens.
• Excellent problem-solving skills and a strong team-oriented mindset.
• Effective communication skills and the ability to work in a dynamic, global team environment.

XG Tech is committed to providing equal employment opportunities by country, state, and local laws. XG Tech does not discriminate against employees or applicants based on conditions such as race, color, gender identity and/or expression, sexual orientation, marital and/or parental status, religion, political opinion, nationality, ethnic background or social origin, social status, disability, age, indigenous status, and union.