Total 317 Others process improvement manager job vacancies in Art / Design / Entertainment category in The Philippines

Responsibilities:

• Recognize changes to scope and notify the discipline Lead Engineer.
• Interface with other departments to obtain input for Discipline designs and drawings.
• Interact with suppliers, other discipline Engineers (Control & Instrumentation, Piping, Mechanical).
• Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager.
• Review vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary.
• Check engineering performed by others within Discipline.
• Process simulations (Hysys or similar) / Heat and material balances
• Process flow diagrams (PFD)
• Drafting and preparation of Piping and instrument diagrams (P&ID).
• Equipment and instrument process datasheets
• Process specifications
• Equipment list (process data)
• Line list (process data)
• Equipment and line sizing calculations
• PSV sizing calculations
• Experience in Heat Recovery Systems (WHRUs, HRSG, CCPP) or Power Industry would be an added advantage.
• Operating philosophy and startup and operating manuals.
• Perform any other duties as assigned by immediate supervisor.

Pre-requisites:

• Minimum bachelor’s degree in chemical engineering.
• Minimum 5 years in Design Engineering Consultant predominantly performing detail design.
• Fresh graduates are welcome to apply.
• Experienced in Auto Cad.
• Familiar with the content and application of standards, codes and guidelines as applicable.

About the Role

We are looking for a Process Utilities Engineer experienced in semiconductor utility systems.

Responsibilities

• Design and coordinate: Chilled Water (CHW) Process Cooling Water (PCW) CDA Systems Vacuum Systems Exhaust Systems
• Prepare engineering calculations and equipment specifications.
• Review vendor and subcontractor designs.
• Support installation and commissioning activities.

Requirements

• Diploma / Degree in Mechanical Engineering or other related Engineering disciplines.
• Experience in semiconductor utility systems.
• Knowledge of SEMI standards.
• Experience in design and site execution.

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

About the role

We are looking for a capable Process Design Engineer (Black Utilities) to support the design, coordination, and optimization of utility systems such as chilled water, heating hot water, compressed air, and steam systems. This role involves system sizing and calculation, layout development, equipment selection, and cross-disciplinary technical coordination. 

Responsibilities 

• Design black utility systems, including chilled water, heating hot water, compressed air, and steam systems.

• Perform system calculations for the above utilities and develop related system layouts, piping arrangements, and equipment specifications.

• Prepare datasheets for utility equipment and valves, and participate in technical bid evaluations.

• Maintain strong knowledge of commonly used utility equipment brands, including their features and performance characteristics.

• Coordinate with other disciplines, review returned design documents, and ensure compliance with project requirements and process standards.

• Track industry trends and support company marketing efforts and technical presentations when needed.

Requirements

• Bachelor’s degree or above in HVAC, Energy, Thermal Engineering, or a related discipline.

• At least 5 years of experience in utility system design, heating/cooling source systems, or engineering management.

• Proficient in CAD and other relevant design software.

• Strong knowledge of cleanroom design standards and specifications.

• Good communication and presentation skills, with a strong sense of responsibility and self-discipline.

• Mandarin language skills are required for coordination with Mandarin-speaking stakeholders. 
  

  If interested, please submit your application to cvs@jdawms.com with your expected salary and resume.

  We regret that only short-listed candidates will be contacted shortly. By submitting your application or resume, you agree to the collection, use, retention, and sharing of your personal information with potential employers for their assessment.

  JDA WMS Pte Ltd | EA Personnel: Pham Thi Tuyet Mai

  EA License No: 23S1595 | EA Registration No: R25127838

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Job Responsibilities:

• Quality role to handle incoming and in process quality check and control. Govern the quality control with defined specification and update COA per specific customer requirement and specification.
• Triggering for MRB review if found non-conformity of product. Attend I-share meeting Ops and engineering
• Work with internal team for customer quality issue investigation, 8D and failure verification, setting standards for quality.
• Coordinate with internal team on Change Management and call biweekly meeting with team to review the overall change request. Prepare PCN report for notification to customer and align meeting with sales and CS on communication strategy.
• Review product specification and support for banned/restricted substance analysis and coordinate with third party.
• Support on in Process/Product Quality Audit, System and Customer audit
• Working with other staffs to establish procedures and quality standards and to measure against these targets for compliances. Determining, negotiate and agree on in house quality procedures, standards and specifications.
• Team member for PDP Gate3,4 and 5 and work with innovation team on the CTQ , specification and test method during PDP
• Coordinate with engineering team on SPC review and drive for Cpk improvement activities. Assist in internal statistical information, distribution and analysis. Knowledge of SPC and ability to use Minitab/JMP.
• Training to the quality control inspector and competency development
• Engage with inspection equipment vendor on PM, Calibration and carried out GRR
• Annual Capex and headcount planning to support operation

Job Requirement:

• Degree in Engineering/Material Science/Chemistry
• At least 3 years relevant experience is required
• ISO9001 quality management system
• Knowledge in SPC, Minitab/JMP, FMEA, and process mapping

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Role purpose

Designs the ITSM process workflows that support delivery of stable EUX operations — Incident, Problem, Change and Release Management aligned to Customer's operational governance standards.

Key responsibilities

• Author detailed process workflows for Incident, Problem, Change and Release across the in-scope EUX services.

• Document runbooks, escalation matrices and operational handover artefacts.

• Partner with Customer ITSM owners to align workflows to existing tooling and governance.

• Validate workflows during pilot and refine based on operational telemetry.

Required experience and qualifications

• 5+ years designing ITSM processes for enterprise organisations.

• ServiceNow process design experience is a plus.

• Demonstrable delivery of process design on at least one regulated-industry transformation.

• Demonstrable delivery experience in a regulated industry — financial services, government, pharmaceuticals, energy or similar — including familiarity with change control, audit and compliance constraints.

• Experience working in a large, geographically distributed global organisation, comfortable operating across multiple time zones and cultural contexts.

• Experience working within a globally distributed team, collaborating effectively across multiple time zones and cultural contexts.

• Excellent written and verbal communication skills; able to engage with senior stakeholders and translate technical detail for non-technical audiences.

• Comfortable working in a hybrid client/partner team with clear ownership boundaries.

Technical skills

• ITSM design — Incident, Problem, Change, Release, Demand & Capacity, Financial Controls.

• Service Transition planning aligned to Customer operational governance and tooling.

• Process workflow design and runbook authoring.

• Target-state operations model definition and BAU handover.

Desirable

• Banking or finance experience.

• Experience in role, delivering complex, global End User transformation in a regulated industry.

• ITIL v4 Foundation (Managing Professional is a plus) or equivalent service-management certification.

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Our client, an well-established local MNC in commercial Air-Con industry is seeking for ACMV Manager (Design) Facility Manager / Operations Manager ( Commercial Building / Retail Mall ) - Salary: $ 7,000.00 to $ 9,000.00 + VB / 5 days work week

Requirements

• Degree in Mechanical Engineering or Electrical Enigneering or relevant

• At least 5 to 8 years of experience in designing and optimising efficient, cost-effective chiller plant and airside systems to support both project acquisition and delivery.

• At least 5 to 8 years of experience overseeing a team of Engineers and Technicians to run daily operation in either Industrial plant or Commercial Office or Retail shopping mall

• Experience in Regional / Asia coverage

• Strong in ACMV design, analytical, and problem-solving skills

• Mandatory certifications: BCA Energy Auditor, GMAP/GMAAP, SCEM

• Good communication, analytical skill and stakeholder management skill

• Independent, confident and leadership qualities

Others

• Salary: $ 7,000.00 to $ 9,000.00

• 5 Days work week (Monday to Friday), office hour
  

Interested candidate can send in your resume (word format prefer) to grayson.su@thetalentnetwork.com.sg

• Managing the overall design process for civil and infrastructure projects from design development to construction stage.

• Coordinate and interface with various stakeholders including civil, structural, geotechnical, and M&E consultants, as well as LTA, authorities, and contractors.

• Review and evaluate technical submissions, design drawings, and reports to ensure compliance with statutory requirements and design intent.

• Support in managing the design schedule to ensure timely delivery of all design packages according to project milestones.

• Participate in design and technical meetings, identifying and resolving design discrepancies and constructability issues.

• Ensure authority submissions are prepared accurately and submitted on time; follow through until approvals are obtained.

• Implement and monitor design quality assurance/control systems and ensure that all designs meet relevant safety, environmental, and sustainability standards.

• Assist in the evaluation of design changes, variation proposals, and value engineering opportunities.

• Any other duties that assigned by a superior.

Requirements:

• Bachelor's Degree in Civil Engineering recognized by PE Board Singapore

• Min 12 years of engineering experience and at least 8 years of experience in the design of civil and infrastructure project structures of similar scale, complexity and nature of work. Preference will be given to candidate with LTA experience.

• Strong technical understanding of civil and structural engineering design, construction methods, and sequencing.

• Proficient in AutoCAD, Revit, and other relevant design software.

• Good team player, self-motivated with strong ability to multi-task and able to handle fast-paced projects.

• Excellent interpersonal, communication, and coordination skills.

As a manager, you will ensure that your diverse portfolio of international and local clients receive the same level of excellent service and client care. You will proactively manage and take responsibility for the compliance aspects of your client companies and provide a full range of company secretarial services. In addition, you will train, supervise, guide and coach your team-mates to provide exceptional services.

Requirements:

• Minimum 8-12 years of relevant corporate secretarial managerial experience
• Must be CSIS / ICSA qualified.
• Experience working with a diverse portfolio of private and listed companies across various industries.
• Adept at handling multiple projects independently with excellent planning skills
• Adopt a positive leadership approach towards empowering and coaching team members.
• Strong communicator with stellar people management skills.
• Keen passion for change and continuous improvement.

Please visit our website at www.drewnapier.com for other available vacancies.

Kindly state full details of qualifications, experience, current and expected salary in your resume.

(We thank all applicants for writing in. Only shortlisted candidates will be notified. All applications will be treated with the strictest confidential).

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Job Description.:

• You need to understand the management of company operations and processes. You will need data analytics to monitor performance, identify insights, and enable data-driven in the company. You will be required to participate in the management of project processes and project timelines.

• Perform detailed scoping of the project by working closely with all functional leads – including the alignment of the workstream’s outcome, responsibilities, task lists and timelines.

• Delegating on behalf of the manager.

• Weighting in on decision-making processes by presenting reasonable, fact-based points of view.

• Carrying out specific projects or tasks as instructed by the manager.

• To handle any related administrative tasks.

Requirements

· Proficiency in MS Office (Word, Excel, Outlook and PowerPoint).

· High level of interpersonal skills in handling sensitive and confidential situations and documents.

· Proven ability to manage flexible schedules.

· Minimum 3-years management executive work experience in Singapore.

· Diploma and Bachelor’s degree in Business Management and Administrative Support are preferred.

1. 1. Sales & Business Development

• Lead the sales team in handling client enquiries and closing renovation projects

• Develop and execute strategies to achieve monthly and quarterly sales targets

• Build strong relationships with high-value clients and key accounts

  
  

  2. Project & Operations Coordination

• Work closely with subcontractors, suppliers, and project managers

• Ensure smooth workflow from sales handover to project completion

• Resolve client issues and escalations professionally
  

Requirements

• Minimum 4 years experience in Interior Sales Design / Renovation Industry

• Strong knowledge of renovation processes, materials, and costing

• Proven track record of achieving sales targets

• Excellent communication skills in English & Mandarin (to liaise with bilingual customers)

• Able to manage multiple projects and team priorities

• Passionate about interior design and customer service