Total 644 design editor job vacancies in Art / Design / Entertainment category in The Philippines

Key Responsibilities Key Responsibilities

RTL Design and Verification

• Develop synthesizable RTL in Verilog/SystemVerilog for custom on-chip test, monitoring, and diagnostic IP targeting analog and mixed-signal failure detection.
• Design and verify digital logic blocks such as test controllers, sequencing logic, sensor/interface control logic, measurement and monitoring logic, data capture and comparison logic, and failure detection and reporting logic.
• Build clean register and bus-connected interfaces, for example APB, AHB, or AXI-lite based control and status paths, to enable firmware interaction and subsystem integration.
• Develop testbenches, assertions, checkers, and block or subsystem-level verification environments to validate controller behavior, detection logic, configuration programming, fault response, and status reporting.
• Plan and execute functional verification for normal, corner, negative, and fault-injection scenarios, with adequate coverage of critical diagnostic behaviors.
• Collaborate with analog and mixed-signal designers to create or use behavioral models, stubs, and interface abstractions for realistic verification of failure mechanisms and observability paths.
• Debug RTL and simulation issues through waveform analysis, assertion-based checks, root-cause investigation, and close interaction with integration and product teams.
• Ensure the RTL is modular, reusable, timing-aware, synthesis-friendly, and scalable for integration across multiple SoC derivatives.

SoC Integration

• Integrate custom DFT / diagnostic IP into SoC subsystems and system-level test architecture with proper consideration for clock/reset structure, interrupt handling, and status visibility.
• Work closely with SoC integration and DFT teams to ensure compatibility with system test infrastructure, production test flows, diagnostic mechanisms, and firmware control requirements.
• Support integration readiness by addressing CDC, reset interactions, timing considerations, low-power implications, and implementation handoff requirements.

Cross-Functional Collaboration

• Work closely with digital, analog, and mixed-signal design teams, DFT engineers, SoC architects, and product/test engineering teams throughout the design and validation cycle.
• Translate analog or mixed-signal failure modes into robust digital detection logic suitable for on-chip test, screening, and diagnosis.
• Contribute to technical discussions on architecture tradeoffs, observability strategy, and practical silicon debug readiness.

Required Qualifications

• Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field, with 5–7 years of relevant experience.
• Strong hands-on experience in RTL design using Verilog/SystemVerilog.
• Practical experience in RTL verification, simulation, and debugging methodologies.
• Solid understanding of ASIC / SoC design flow including coding, simulation, synthesis, and integration.
• Good foundation in digital design concepts such as FSM design, datapath design, bus protocols (AXI/AHB/APB), clock-domain handling, reset strategy, and timing considerations.
• Experience working in complex SoC environments with cross-functional teams.

Preferred Qualifications

• Experience developing control, monitoring, or diagnostic IP associated with analog or mixed-signal subsystems.
• Exposure to behavioral modeling or interface definition for analog and mixed-signal verification use cases.
• Familiarity with subsystem-level integration, production screening considerations, and silicon debug support.
• Working knowledge of scripting or automation for verification, regression, or design productivity is an advantage.

Responsibilities

1. Develop design requirements for an NPU based on system-level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug any issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 5+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on experience in digital design is a must.
4. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
5. Experience in synthesis, with analysis of power, timing and area.
6. Disciplined, quality-minded, and highly driven for excellence.
7. Excellent team player and good communication skills.
8. MSEE/BSEE in Electrical Engineering or Computer Engineering.
9. Understanding of convolution operator and number system is required.
10. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
11. Experience in UVM verification methodology is a plus.
12. A plus to have SoC design experience.
13. Experience with optimizing micro-architectures for low-power and low-area is a plus.
14. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
15. Experience with past design experience with NPU / GPU / DSP design is a plus.
16. Experience with ARM or RISC-V processor systems is a plus.
17. Passionate and strong in general programming is a plus.

DESIGN INTERN JOB DESCRIPTION

Responsibilities

·      Support the Integrated Marketing team in campaign and design work to win new business. This includes conceptualizing, exploring art directions and producing artwork for social, print and digital platforms.

·      Support clients in daily tasks that include designing layouts, infographics and producing videos to create communications collaterals.

·      Support marketing collaterals for the agency. Design collaterals and generate templates to help elevate our company’s visual identity. This applies to internal documents, client-facing materials and social media.

·      Stay up to date with latest lifestyle trends such as top shows on Netflix, latest TikTok challenges and new gradient trends which drive designers mad.

Requirements

·      Diploma or Degree undergrad in Digital Arts/Graphic Design correlated discipline

·      Technical capabilities with Illustrator, Photoshop and InDesign

·      Adaptable to work collaboratively on the cloud

·      Possess communication skills and openness to understand, explain and discuss briefs and ideas

·      Familiar with Spark AR and ability to work on basic motion graphics and video editing an added advantage

Role Overview

We are seeking a Fashion Design Intern to join our design team. This internship offers hands-on experience in conceptualizing, designing, and developing seasonal collections and is ideal for a highly organized, detail-oriented individual with a strong passion for the fashion industry. You will collaborate closely with the production team and marketing to bring each collection to life from initial concept through final samples. 

Key Responsibilities

• Assist in the preparation and execution of garment fittings, including attending fitting sessions and documenting feedback.

• Record and maintain garment measurements accurately to support product development and production requirements. 

• Support the styling team by assisting with styling preparations, mood boards, and creative direction development.

• Actively research and stay updated on emerging fashion trends, fabrics, colours, and styling to contribute innovative ideas to the collections.

• Coordinate with the manufacturers and suppliers, participate in fittings, and assist with consistency in fit, quality, and aesthetic across all product categories.

• Provide support during photoshoots and product launches. Work with the creative and marketing team on lookbooks, campaign styling, merchandising, and product storytelling.
  

Learning Opportunities and Benefits

• Practical experience in garment fitting, measurement analysis, and product refinement.

• Understanding of styling principles and how creative direction is translated into visual presentations and campaigns.

• Hands-on experience with the entire fashion design process.

• Opportunity to build a professional portfolio.

• Employee discounts.

• Potential for future full-time employment based on performance.
  

Interested candidates are invited to submit their resume and portfolio to career@chello.sg

Description:

• Take charge of ordering and preparing all materials (including but not limited to tapes, film reels and video media) and their movements;
• Design movie posters, advertisements, graphic and other printed materials including pre-press artwork preparation
• Video editing skills, a strong artistic eye who loves conceiving and executing creative work Produce compelling multimedia content, from conceptualisation, pre-production, production to post production.
• Knowledge of DCP subtitling preferred

Requirements:

• Diploma/ITE graduate in Film, Graphic, Multimedia or related discipline with minimum of 2 years of experience in Production/Video Editing
• Knowledge of Photoshop, Illustrator, Final Cut Pro, Premiere Pro is a must Knowledge of HTML, CSS, DHTML, Javascript, PHP & mySQL is preferred Able to multi-task different projects to meet tight deadlines

Strong time management and multi-tasking skill

Highly creative with a good eye for details

Positive attitude, with strong communications skills and eagerness to learn Please include your portfolio & showreel

Department:
Communications & Media Centre (CMC)/ Streams of Life (SOL)

Reports to:
Communications Senior Manager

Overall responsibilities:
We are seeking a talented and versatile individual to join our team as a Videographer & Photographer cum Video Editor. This role involves managing various aspects of video and photography projects, from project delegation to final editing. The ideal candidate is creative, detail-oriented, and proficient in both videography and photography techniques.

Key areas of Responsibility

• Project Delegation:Delegate video projects to outsourced video editors while ensuring adherence to project timelines and quality standards.
  Coordinate with external vendors and freelancers as needed.
  
• Quality Checker:Ensure the quality of major video productions, including corporate videos, promotional videos, teasers/stingers, sermons, and post-video editing.
  Conduct thorough reviews to maintain consistency and excellence in the final output.
  
• Writer/Editor:Collaborate with the team to develop scripts and storyboards for major video productions, particularly those related to corporate matters.
  Edit and refine scripts to align with the project objectives and messaging.
  
• Videographer and Photographer:Capture high-quality photos and videos during event coverages for both internal and external clients.
  Utilize creative techniques and equipment to produce compelling visual content.
  
• Video Editor for Urgent Requests:Respond promptly to urgent corporate video requests and ensure timely delivery of edited videos.
  Maintain flexibility and adaptability to meet changing project demands.
  
• Procurement of Media Equipment:Research and procure media equipment required for video and photography projects.
  Manage inventory and ensure equipment is well-maintained and in working condition.

Requirements:

• Proven experience in videography, photography, and video editing roles.
• Proficiency in video editing software (e.g., Adobe Premiere Pro, After Effects) and photography editing tools (e.g., Adobe Photoshop, Lightroom).
• Strong creative vision and storytelling skills.
• Excellent attention to detail and ability to maintain high-quality standards.
• Effective communication and interpersonal skills.
• Ability to work independently and as part of a team in a fast-paced environment.
• Experience in project management and vendor coordination is preferred.
• Knowledge of current trends and best practices in videography, photography, and video editing.

Note: This job description is intended to convey information essential to understanding the scope of the position and is not an exhaustive list of skills, efforts, duties, responsibilities, or working conditions associated with it. Responsibilities may change and evolve over time.

Job Description

• Industry/ Organization Type: Building and Construction
• Position Title: Design Manager (Facade / Building Envelope)
• Working Location: Redhill
• Working Hours: 5 Days (Mon - Fri, 8:30AM – 6PM)
• Salary Package: Basic Salary + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Lead and manage the design team in executing façade design works according to project requirements and timelines.
• Plan, organize, and monitor design activities to ensure alignment with the overall construction schedule.
• Provide leadership and guidance to team members, including work allocation, design quality checks, and productivity improvement.
• Review and verify design drawings, cutting lists, and technical deliverables to ensure compliance with specifications and standards.
• Coordinate effectively with consultants, main contractors, and other stakeholders to resolve design and technical issues.
• Identify and report any additional work or variations to the Project or Contract Manager for approval.
• Support site teams in resolving design clashes and provide technical input during construction.
• Participate in design workshops and review meetings, ensuring constructability and design quality are maintained throughout the project.
• Manage design changes efficiently to minimize schedule disruptions and cost impacts.
• Address interface issues between disciplines during various design stages and ensure smooth communication across teams.
• Perform other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum 5 years of experience in façade design or related fields.
• Proficient in design development and design management processes.
• Knowledge of Revit and Rhino is an advantage; must be able to read and extract information from 3D models in these formats.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #79467 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilities:

1. Develop design requirements for an NPU based on system-level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug any issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 8+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on experience in digital design is a must.
4. Preferably has lead a team of at least 3 to 4 people in the past at the capacity of a design lead.
5. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
6. Experience in synthesis, with analysis of power, timing and area.
7. Disciplined, quality-minded, and highly driven for excellence.
8. Excellent team player and good communication skills.
9. MSEE/BSEE in Electrical Engineering or Computer Engineering.
10. Understanding of convolution operator and number system is required.
11. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
12. Experience in UVM verification methodology is a plus.
13. A plus to have SoC design experience.
14. Experience with optimizing micro-architectures for low-power and low-area is a plus.
15. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
16. Experience with past design experience with NPU / GPU / DSP design is a plus.
17. Experience with ARM or RISC-V processor systems is a plus.
18. Passionate and strong in general programming is a plus.

Position Overview:

• As a design verification engineer, you will be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

• Experience in UVM verification methodology
• Disciplined, quality-minded, and highly driven for excellence,
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 8 years of relevant experience, but are open to fresh graduates with outstanding results
• Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities
• Experience in video processing and video analytics is a plus
• Passionate and strong in general programming is a plus

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 3+ years of Digital Design and verification related experience
• Experience / knowledge in CMOS Image Sensor and Image Signal Processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Results oriented and adaptable to changes

Description:

• You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

• Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog
• Experience in ARM or RISC-V processor system
• Experience in embedded C and assembly code programming
• Experience in analysis of power, timing and area
• Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)
• Disciplined, quality-minded, and highly driven for excellence
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 8 years of relevant experience
• Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus
• Experience in system modelling and simulation using emulator and SystemC is a plus
• Experience in UVM verification methodology is a plus
• Passionate and strong in general programming is a plus

Position Overview:

• As a design verification engineer, you will be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

• Experience in UVM verification methodology
• Disciplined, quality-minded, and highly driven for excellence,
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 8 years of relevant experience, but are open to fresh graduates with outstanding results
• Candidates with relevant experiences would be offered as Staff or Sr. Staff, taking on higher responsibilities
• Experience in video processing and video analytics is a plus
• Passionate and strong in general programming is a plus

Encore Films was established in 2003 with the aim of bringing quality movies to the audience in the Southeast Asia.

Responsibilities:

- Video Editing & Content Creation

- Design movie posters, advertisements, graphic and other printed materials including pre-press artwork preparation

- Administer and maintain company website including promotional web content and e- newsletter

- Videography during events

- Social media management

- Video assets conversions

1.       Determined appropriate construction methods, materials, and quality standards by reviewing and coordinating structural design and shop drawings to ensure compliance with project specifications and relevant codes.

2.       Drafted, interpreted, and reviewed engineering drawings, technical specifications, and construction procedures to ensure accuracy, constructability, and adherence to design intent.

3.       Coordinated with consultants, contractors, and fabrication teams to resolve technical design issues and implement necessary drawing amendments.

4.       Prepared and submitted technical documentation, including design approval requests and revised drawings, ensuring proper document control and compliance with quality management systems.

5.       Monitored design modifications, assessed their impact on construction methodology and project progress, and facilitated necessary revisions to maintain alignment with approved designs.

6.       Reviewed and checked structural design calculations provided by consultants for temporary and permanent works, ensuring operation team can met design requirements and were suitable for safe execution.

7.       Established and maintained coordination between design and site teams to support effective execution of construction activities.

8.       Provided technical support to the construction team by addressing reinforcement and structural queries raised during inspections and site activities.

9.       Maintained updated records of structural components and construction progress to ensure accurate documentation and tracking of completed works.

Job Description.:

• You need to understand the management of company operations and processes. You will need data analytics to monitor performance, identify insights, and enable data-driven in the company. You will be required to participate in the management of project processes and project timelines.

• Perform detailed scoping of the project by working closely with all functional leads – including the alignment of the workstream’s outcome, responsibilities, task lists and timelines.

• Delegating on behalf of the manager.

• Weighting in on decision-making processes by presenting reasonable, fact-based points of view.

• Carrying out specific projects or tasks as instructed by the manager.

• To handle any related administrative tasks.

Requirements

· Proficiency in MS Office (Word, Excel, Outlook and PowerPoint).

· High level of interpersonal skills in handling sensitive and confidential situations and documents.

· Proven ability to manage flexible schedules.

· Minimum 3-years management executive work experience in Singapore.

· Diploma and Bachelor’s degree in Business Management and Administrative Support are preferred.