QA/QC Engineer (Site) — Semiconductor Construction

Quality Assurance Management (QAM) Asia Pte. Ltd. · Singapore · On-site

Build the cleanrooms behind the world's most advanced chips.

Every wafer that ships from Singapore's fabs starts with piping that was welded right, pressure-tested right, and signed off right. That's the job.

QAM is the QA/QC partner the biggest names in semiconductor — Micron, Intel, TI, and the major foundries — trust to make sure their facilities are built to spec the first time. We're looking for a mechanical/Electrical/Process QA/QC Engineer who takes pride in catching the defect before it becomes a problem, and we'll put you on the largest projects in the region.

If you know your way around a weld map, a helium leak test, and an MOS — and you'd rather be on the floor than behind a desk — read on.

What you'll do

• Own the mechanical and process-piping QA/QC scope on live semiconductor construction sites — UHP and specialty gases, high-purity process piping, CDA, PCW, chilled water and process utilities.
• Run the inspections that matter: weld fit-up and visual inspection, walk-downs against P&IDs, ISO drawings and specs, and hold-point sign-offs that gate the work forward.
• Witness and verify pressure, helium leak, moisture, oxygen and particle-purity testing — and make sure every result is documented and traceable.
• Review and mark up ITPs, method statements (MOS), WPS/PQR and material submittals; verify incoming material authenticity before it's installed.
• Raise, track and close out SORs and NCRs — and coach the crews so the same issue doesn't come back.
• Keep the quality record clean and current in the project's digital systems, right through to testing, commissioning and handover.

What you'll bring

• 4–7 years of QA/QC site experience in semiconductor, electronics, pharmaceutical, oil & gas or comparable high-spec industrial construction.
• Hands-on knowledge of process and high-purity piping: orbital welding, tube fit-up, fittings, valves, pressure testing and leak/purity validation.
• Confident reading P&IDs, isometrics, layouts and technical specs, and applying ASME, ANSI, ASTM and relevant codes.
• A degree or diploma in Mechanical Engineering (or equivalent technical experience), and the discipline to keep documentation audit-ready.
• Comfortable on an active construction site, coordinating with contractors, vendors and owner teams — and not shy about stopping work when quality demands it.

Bonus points: Will to travel, Malaysia, Vietnam, Europe and India. UHP gas / high-purity systems experience, prior work on semiconductor fab or ATM facilities, exposure to CxAlloy / Autodesk ACC or similar QA platforms, and any T&C / commissioning background.

Why QAM

• Work on the most advanced semiconductor facilities being built in Asia, with a company that's been doing this for three decades.
• Join a 300-strong regional field team and a real career path — from site engineer to discipline lead to programme leadership.
• ISO 9001 / 14001 / 45001 certified, bizSAFE STAR, SEMI member — quality and safety aren't slogans here, they're the product.
• Modern, tablet-based digital QA tools that let you do the engineering, not the paperwork.

Ready?

QAM Asia is an equal-opportunity employer. Singapore-based role;

Job scope:

• Act as the primary owner of plant automation systems, including PLC, SCADA, MES, and historian platforms.
• Ensure automation systems comply with data integrity, cybersecurity, and applicable regulatory standards.
• Maintain automation systems in a validated state in accordance with GAMP 5 and cGMP requirements.
• Design, develop, and deploy automation solutions for both new and existing manufacturing processes, including integration with digital manufacturing technologies.
• Serve as the subject matter expert (SME) in the development and review of URS, FS, SDS, HDS, and validation documentation.
• Lead or participate in FAT, SAT, IQ, OQ, and PQ activities for automation-related projects.
• Champion Industry 4.0 initiatives, including predictive maintenance, real-time data analytics, and smart sensor technologies.
• Utilize Lean and Six Sigma principles to enhance process efficiency, minimize downtime, and improve system performance.
• Implement effective alarm management practices and advanced process control methodologies.
• Oversee automation projects throughout the entire lifecycle, from conceptualization to implementation, including budget control, scheduling, and vendor coordination.
• Deliver automation enhancements and expansion projects on time while aligning with operational and business objectives.
• Provide technical expertise, guidance, and mentorship to operations and maintenance personnel.
• Develop and conduct training programs focused on automation troubleshooting, system optimization, and best practices.
• Ensure compliance with regulatory and industry standards, including 21 CFR Part 11, GAMP 5, and cybersecurity frameworks.
• Support internal audits and regulatory inspections related to automation, control systems, and metrology infrastructure.
• Familiar with Allen Bradley and Siemens plc

Company Overview

We are representing a well-established automation engineering company specializing in the design, manufacturing, and installation of automated material handling systems. The company serves clients across Singapore and Southeast Asia and is recognised for its innovation and technical excellence in industrial automation solutions.

Job Summary

We are seeking an Automation Engineer to design, develop, and implement automation control systems for industrial applications. The role involves PLC programming, electrical design, system integration, and technical support across project lifecycles. You will collaborate closely with project teams to ensure smooth commissioning and successful system delivery.

Responsibilities

• Design, develop, and implement PLC, HMI, and SCADA programs to optimise industrial automation systems
• Conduct testing, troubleshooting, and debugging of control systems to ensure reliable and efficient operations
• Develop electrical schematics, wiring diagrams, and panel layouts using CAD software
• Prepare technical documentation including functional design specifications, project schedules, and user manuals
• Participate in system integration projects from planning to commissioning
• Attend site surveys and project kick-off meetings to align technical requirements and project scope
• Provide technical support and training to operators and maintenance teams
• Ensure smooth system handover and knowledge transfer to end users
• Work independently to meet project deadlines with a proactive and positive attitude
• Maintain strong communication and customer relationship management throughout project execution

Requirements

• Diploma or Degree in Engineering or related discipline (Mechatronics preferred)
• Fresh graduates are welcome to apply
• Knowledge or interest in PLC, HMI, SCADA, or industrial automation systems
• Ability to read or develop electrical drawings is an advantage
• Good communication skills in English (written and spoken) preferred
• Strong problem-solving skills and willingness to learn

Additional Information / Benefits

• East Region, Singapore
• 5-day work week (Full-time role)
• Group medical insurance
• Long service awards
• 14 days annual leave per year
• Supportive team environment with flexibility and collaboration
• Competitive salary and benefits package

About the Role

We are looking for a Streaming Data Engineer to design and build scalable real-time data pipelines and streaming data platforms. This role focuses on building high-throughput, low-latency data systems capable of processing large-scale event streams and enabling real-time analytics.

Key Responsibilities

1. Design and develop real-time streaming data pipelines

2. Build event ingestion systems using Kafka or similar messaging systems

3. Implement stream processing jobs using Flink / Spark Streaming

4. Develop scalable stream processing jobs

5. Build and optimize real-time analytical databases

6. Build and maintain data pipelines supporting both batch and streaming workloads

7. Support real-time dashboards and data APIs

8. Implement monitoring and alerting for streaming pipelines

9. Work closely with Data Scientists, Data Analysts, Backend Engineers, and Platform Engineers

What We’re Looking For

1. 3–6 years of experience in Data Engineering / Backend Engineering

2. Experience with real-time analytical databases (Starrocks / Clickhouse / Doris)

3. Experience with streaming data technologies (building distributed data systems)

4. Proficiency in Python / Java / Scala / SQL

5. Apache Kafka / Apache Flink / Spark Streaming

What We Offer

1. A collaborative and inclusive work environment.

2. Opportunities for professional growth and development.

3. The chance to play a pivotal role in shaping the future of our organization.

Job Summary

Assist the Project Manager in executing building projects by planning activities, coordinating technical and site issues, and collaborating with teams to ensure timely and quality project delivery.

Responsibilities

• Plan and monitor project activities to align with the master schedule and ensure timely completion of tasks
• Coordinate with consultants to identify, analyze, and resolve technical issues impacting project progress
• Manage on-site coordination with subcontractors to address and resolve site-related challenges efficiently
• Collaborate with the project team to analyze technical problems and implement effective solutions to maintain project quality
• Support the Project Manager in tracking project milestones and preparing progress reports for stakeholders

Preferred competencies and qualifications

• Bachelor's Degree, Post Graduate Diploma, or Professional Degree in Engineering (Civil) or equivalent
• Minimum of 2 years of relevant experience in building project management and execution

Job Responsibilities:

· Responsible for projects management, planning and design works

· Meeting clients & services providers on scope of service and conduct field surveys

· Handling project evaluation, budgets, documentation, technical specification and coordination

· Conduct analysis and selection of systems; evaluate project budgets

· Complete design documents & technical specifications

· Work coordination with other disciplinary teams including architectural, mechanical and electrical

· Assist in e-Submission to authorities for utilities services and related building regulatory submission

Requirements:

· Degree in Civil Engineering accredited by Professional Engineer Board, Singapore.

· Minimum 3 years of experience in the industry, preferably in consultancy firm

· Able to work independently with minimal supervision

We would like to invite interested applicants to apply.

Thomas Tan Teck Nang

Registration No: 12C6253

License No: R2094900

By submitting an application or your resume, you are deemed to have consented to Dynamic Human Capital Pte Ltd collecting, using and disclosing your personal data for the purposes stated in our privacy notice (https://dhc.com.sg/privacy-policy). You acknowledge that you have read, understood, and agree with the terms in our privacy notice.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

Company Overview / Employee Value Proposition

ACE WATER PTE. LTD. is a rapidly expanding water treatment company specializing in consultancy and EPC turnkey services for water treatment, reclamation, and desalination plants in Singapore and the Asia Pacific region. We develop innovative, robust, and cost-competitive solutions based on extensive field experience and deep understanding of both conventional and state-of-the-art technologies for municipal and industrial water and wastewater challenges.

Job Summary

You will independently lead water and wastewater projects, managing budgets, schedules, and deliverables while collaborating with clients, project teams, and subcontractors to ensure seamless project execution and compliance with safety and quality standards.

Responsibilities

• Lead water and wastewater projects independently by managing budgets, planning, schedules, and deliverables to achieve project objectives
• Coordinate effectively with clients, project teams, and subcontractors to ensure smooth project implementation and timely resolution of issues
• Collaborate with Project Manager and BIM Designer to review, update, and submit drawings promptly for approval
• Prepare detailed method statements, risk assessments, progress reports, and technical submissions to support project execution and compliance
• Conduct regular site inspections to monitor project progress, quality standards, safety, and health practices, and address any arising issues
• Participate in plant testing and commissioning activities on site to ensure operational readiness and performance
• Systematically manage engineering and project documentation to maintain accuracy and accessibility
• Certify completed jobs and prepare progress claims to facilitate project financial tracking
• Provide technical support during tender preparation to enhance proposal quality and competitiveness
• Collaborate with the Operation Department to support ISO audit processes and maintain certification standards
• Lead and motivate the project team to comply with safety regulations and promote a zero-accident workplace culture
• Execute other ad-hoc assignments as required to support business needs

Required competencies and certifications

• Recognized Diploma or Degree in Mechanical, Electrical, Civil, Chemical, or Environmental Engineering
• Proficiency with AutoCAD to produce and review technical drawings accurately
• Minimum 3 years relevant experience in water treatment or related industry to effectively manage project scope and challenges
• Strong interpersonal and communication skills to engage with diverse stakeholders across all workforce level
• Self-motivated with the ability to work independently and collaboratively as a team player

Responsibilities:

• Carry out design review of C&S and geotechnical design and analysis for coastal structures such as quay wall, port, jetty, revetment and land reclamation etc. for local and/or oversea projects
• Assist the Design Manager to coordinate, manage, and oversee all design related matters including:
• Ensure design coordination, document submission from Contractor is in accordance with the time schedule
• Ensure Instructions issued by Employers are co-ordinated with the Contractors
• Study and review of submissions from the Contractors
• Resolve design discrepancies or technical conflicts which may arise from the Contractor while carrying out the construction works
• Co-ordinate with Contract and Construction team and provide necessary information or correspondences on changes which deviate from the contract and may lead to time and cost implications.
• Chair all design coordination meetings.
• Assist the Project Lead / Project Manager to carry out:
• Review on plan for Site investigation and result interpretation,
• Review on C&S, environmental and geotechnical design and analysis for coastal structures such as quay wall, port, jetty, revetment and land reclamation (i.e. deep and shallow foundation, temporary and permanent retaining system, soil improvement, instrumentation, etc.)
• Managing sub-contracts (i.e. soil investigation contract, Accredited Checker contract, biodiversity contract etc.)
• Managing main contracts
• Supervise both design and/or site work
• Prepare technical reports and submission to Clients and Authorities (i.e. GIR, concept design, detailed design, risk assessment, ground improvement, etc.)
• Ensure all engineering works comply with all relevant statutory standards, regulations and Codes of Practice
• Engage and manage stakeholders, such as clients, design team, site team and other relevant parties
• Support on pursue project: assist in tender submission
• Assist in other Coastal department activities i.e: beach clean up, sports day, etc

Qualifications:

• Bachelor/Master Degree in Civil / Environmental Engineering from recognised and reputable university
• Minimum 5 years of relevant civil engineering experience in large scale infrastructure/reclamation projects

Required Skills:

• Possess the skill, knowledge and ability to manage and co-ordinate all the design activities
• Strong written and verbal communication skills in English
• Team player and able to multi-task
• Discipline, self-motivated and resourceful
• Experience in contract administration will be advantageous
• Well-versed in Microsoft Office Suite of Software (e.g. Word, PowerPoint, Excel etc)
• Proficiency in engineering software such as AutoCAD, Civil 3D, Plaxis etc

Job Summary

We are seeking a proactive Fire Protection Engineer to design, coordinate, and implement fire protection systems (alarms, sprinklers, dry risers, hose reels). You will ensure compliance with Singapore’s fire safety codes and liaise closely with consultants, site teams, and authorities like SCDF and FSSD.

Key Responsibilities

System Design & Coordination

• Design & Review: Develop fire protection systems following SCDF/FSSD regulations, Singapore Fire Code, and project specs.

• M&E Coordination: Coordinate fire services with architects, consultants, and other trades.

• Technical Drawings: Prepare design calculations, layout drawings, and schematic diagrams.

Submission & Compliance

• FSSD Submissions: Prepare and submit fire safety plans and calculations for approval.

• Stakeholder Liaison: Work with QPs and RIs for submissions, site inspections, and clearances.

• Standards Compliance: Ensure all systems align with SS CPs, local codes, and relevant NFPA standards.

Project Implementation & Supervision

• Site Inspections: Verify that on-site installations match design intent and safety standards.

• Technical Support: Assist site teams with material selection, troubleshooting, and system integration.

• Testing & Commissioning: Prepare inspection documents, test reports, and assist in the T&C process.

Documentation & Tenders

Project Handover: Assist with as-built drawings and O&M manual preparation.

Commercial Support: Provide technical input for project tenders and variation claims.

Qualifications

- 3 years experience in Fire Protection trade

Employment type: 1-year contract (Renewable)
Location: Ang Mo Kio
Working Days/ Hours: Mon-Fri 8:30am to 6pm
Eligibility: Singaporean ONLY

Job Overview:

We are looking for a Technical Specialist with AI competencies to support the development and implementation of digital learning applications, including Learning Management Systems (LMS) and other learning technology platforms.

This role involves designing, integrating, and maintaining intelligent learning solutions that enhance user experience, personalize learning pathways, and improve platform capabilities through AI technologies. The ideal candidate will combine strong software engineering skills with knowledge of AI tools and technologies applied to learning environments.

Key Responsibilities:

Learning Application Development

• Develop, customize, and maintain learning applications such as Learning Management Systems (LMS) and other digital learning platforms.

• Support system implementation, configuration, and deployment of learning technologies.

• Ensure applications are scalable, secure, and aligned with system architecture standards.

AI Integration & Development

• Design and integrate AI-powered features into learning platforms, such as recommendation engines, chatbots, or adaptive learning tools.

• Work with AI frameworks and APIs to enhance learning analytics, learner engagement, and personalization.

• Explore and implement AI-driven solutions to improve content discovery, learner support, and performance tracking.

System Integration

• Integrate LMS platforms with other enterprise systems (e.g., HR systems, authentication systems, analytics platforms) using APIs and middleware.

• Ensure compatibility with e-learning standards such as SCORM, xAPI, or LTI.

Testing & Optimization

• Conduct system testing, debugging, and performance optimization for both application and AI components.

• Monitor platform performance and identify opportunities for improvement.

Collaboration

• Work closely with instructional designers, project managers, and product teams to translate learning requirements into technical solutions.

• Collaborate with data engineers and AI specialists to implement machine learning models and intelligent features.

Documentation & Support

• Maintain technical documentation for system architecture, integrations, and AI components.

• Provide technical troubleshooting and support during system implementation and deployment.

Skills & Experience Required

• Technical Skills: Experience in software development using Python, JavaScript, C#, or Java. Knowledge of HTML5, CSS, REST APIs, microservices architecture, and Learning Management Systems (LMS) or learning technology platforms. Hands-on experience with relational databases such as Microsoft SQL Server, MySQL, or PostgreSQL.
• AI & Data Competencies: Familiarity with AI/ML frameworks such as TensorFlow, PyTorch, or Scikit-learn. Experience integrating AI APIs/services including NLP, recommendation engines, or chatbot frameworks. Understanding of learning analytics, data processing, and AI-driven personalization.
• Systems & Integration: Experience integrating enterprise systems through APIs or middleware. Understanding of cloud platforms such as AWS, Azure, or Google Cloud. Familiarity with SCORM, xAPI, LTI, or other digital learning standards is advantageous.
• Soft Skills: Strong analytical, problem-solving, and communication skills, with the ability to translate technical concepts into practical solutions and work effectively in cross-functional teams.
• Systems Administration: Knowledge of user access management, data backup processes, and security protocols in cloud-based environments.
• Project Collaboration: Experience working with both technical and non-technical stakeholders in collaborative project environments.
• Attention to Detail: Ability to ensure configurations, customizations, and integrations meet required specifications and standards.

Preferred Qualifications

• Bachelor’s degree in Computer Science, Information Technology, Engineering, or related field
• Certifications: Relevant certifications in AI, cloud platforms, or software engineering are an advantage. (e.g., Machine Learning, AWS, Microsoft, LMS-specific certifications).
• Experience with Cloud-Based Systems: Experience with cloud platforms like AWS, Azure, or Google Cloud, particularly in the context of learning platforms
• Experience with SCORM/ xAPI: Familiarity with e-learning standards like SCORM, xAPI, and Tin Can API for tracking and reporting learning activities.
• Familiarity with Data Security: Knowledge of data security practices, especially as they apply to sensitive learning and employee data.

Develop Lifting Plans: Establish critical rigging math, calculations, and lifting sequences for complex or tandem lifts.

Assess Environmental Conditions: Evaluate ground bearing capacity, wind speed limits, and nearby overhead power lines.

Select Machinery: Choose the correct crane models, boom configurations, and certified lifting gears (slings, shackles, spreader beams) based on load attributes.

Coordinate the Team: Instruct and define clear boundaries for the Lifting Supervisor, Signalman, and Crane Operator.

Enforce Safety Boundaries: Oversee the implementation of physical exclusion zones to prevent personnel from walking under suspended loads.

• Develop and maintain test programs for characterization, wafer sort, and production using the Advantest V93000 (93K) platform.
• Design and validate test hardware solutions for high-speed I/O (HSIO) applications.
• Lead projects across all development phases, from bring-up to production ramp.
• Collaborate with DFT and DFM teams to improve testability, optimize yield, and enhance overall test methodologies.
• Establish and implement robust test practices, including GR&R, HTOL, and characterization procedures.
• Drive continuous improvement of test coverage, efficiency, and quality.
• Provide technical leadership and mentorship as needed across cross-functional teams.

As a Staff Equipment Engineer specializing in sputter media, you will be responsible for overseeing the operation, maintenance, and continuous improvement of sputtering equipment used in the production of hard disk media. You will work closely with cross-functional teams to ensure optimal equipment performance, minimize downtime, cycle time improvement and contribute to the development of new processes and technologies.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Oversee day-to-day equipment maintenance activities, troubleshooting, and line issue management to ensure high equipment availability and minimal production downtime.
• Lead equipment reliability, maintenance, and engineering improvement initiatives to support stable and efficient manufacturing operations.
• Drive preventive and predictive maintenance strategies to improve equipment reliability, reduce failures, and sustain long-term operational performance.
• Lead equipment upgrades, machine conversions, and technology improvements to support next-generation HDD product requirements.
• Manage new equipment installation, commissioning, and acceptance testing to ensure systems meet operational, safety, and process specifications before production release.
• Monitor and analyze equipment performance, reliability, and OEE data to identify improvement opportunities and drive operational excellence.
• Lead root cause analysis for equipment failures, implementing effective corrective and preventive actions to prevent recurrence.
• Collaborate with Process Engineering and Sputter Yield teams to improve yield performance, reduce defects, and enhance process capability.
• Coordinate closely with Production, Quality, Facilities, and other cross-functional teams to ensure smooth production operations and achieve manufacturing targets.
• Manage engineering projects related to equipment upgrades, modifications, and system improvements, ensuring timely execution within scope and budget.
• Provide technical leadership, guidance, and mentorship to junior engineers and technicians to strengthen team capability and technical competency.
• Develop and maintain engineering documentation, including SOPs, maintenance procedures, and best practices for equipment operation and sustainment.
• Ensure all equipment and related systems comply with safety regulations, company policies, and industry standards.
• Support continuous improvement initiatives by introducing new technologies, automation solutions, and engineering best practices.
• Strengthen knowledge sharing and technical skill development within the engineering team to build a high-performing equipment engineering organization.
• Maintain strong collaboration with OEM suppliers and technical partners to support equipment upgrades, troubleshooting, and technology development.
• Perform other duties and responsibilities as assigned by management.

As a Senior Equipment Engineer specializing in sputter media, you will be responsible for leading equipment sustaining, reliability, and continuous improvement activities to support high-volume hard disk media manufacturing. You will play a key role in driving equipment performance, improving operational efficiency, and supporting new technology implementation. This role requires strong technical leadership to guide technicians in maintaining stable manufacturing operations, reducing equipment downtime, and enabling next-generation product and process requirements.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Lead day-to-day equipment sustaining activities, including troubleshooting, failure analysis, and resolution of equipment-related production issues.
• Drive equipment reliability improvement initiatives to enhance equipment uptime, reduce chronic failures, and improve overall operational stability.
• Develop, implement, and optimize preventive and predictive maintenance strategies to improve long-term equipment performance.
• Lead root cause analysis (RCA) for major equipment failures and implement effective corrective and preventive actions.
• Support equipment upgrades, hardware modifications, and machine conversion activities to meet product and technology roadmap requirements.
• Coordinate new equipment installation, commissioning, qualification, and acceptance to ensure systems meet operational and safety standards.
• Monitor and analyze equipment performance indicators such as OEE, MTBF, MTTR, and downtime trends to identify improvement opportunities.
• Collaborate closely with Process Engineering, Yield Engineering, Production, and Quality teams to improve process capability and manufacturing performance.
• Drive engineering projects related to equipment improvements, automation enhancement, and productivity optimization.
• Develop and maintain equipment documentation including SOPs, maintenance procedures, troubleshooting guides, and best practices.
• Work closely with OEM vendors and suppliers to resolve technical issues, implement upgrades, and support equipment technology development.
• Support cost reduction initiatives through engineering optimization, reliability improvements, and maintenance efficiency.
• Ensure all equipment operations comply with company safety policies, regulatory requirements, and industry standards.
• Participate in continuous improvement initiatives, including Lean manufacturing, automation deployment, and digitalization programs.
• Perform other duties and responsibilities as assigned by management.