Total 807 technical engineer job vacancies in Quality Assurance / Control category

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 5 years of experience in QMS, AS9100, NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Enabling safe and rewarding digital lives for genuine people, everywhere

We make it our mission to ensure more genuine people have digital access to opportunities, and businesses have access to more genuine people. Our technology draws on diverse and reliable data to create a single point of truth for identity and address verification.

With over 30 years of experience behind us our team and technology are focused on enabling safe and rewarding digital lives for everyone. Regardless of age, location or background, genuine people everywhere should be able to digitally prove who they are and where they live.

About the team and role

Team - ID3

GBG’s ID3 is a world-leading software-as-a-service product providing identification services to financial institutions, telecommunications providers and other businesses where customer identification is essential. This excellent opportunity will have you working on the ID3 on-line identity product which is used by many of UK and Europe’s most progressive businesses.

QA Engineer

Reporting into the Lead Software Developer, you will champion an automation first testing strategy within the Agile team. You will design, build and maintain automated test frameworks while performing focused exploratory testing to validate new features, investigate defects and ensure broad, meaningful coverage across the product.

What you will do

As part of Agile development teams: 

• Create thorough test scenarios and test cases based on agreed acceptance criteria. 
• Provide advice, especially to the Product Owner, on any gaps in, or issues with, the acceptance criteria from a testing perspective. 
• Perform focused exploratory testing activities, documenting results and creating clear, actionable defect reports (using Jira and Xray). 
• Create and execute automated test scripts and contribute to the maintenance of automated test suites. 
• Assist with the creation, management and execution of test plans for larger feature development activities where needed. 
• Actively contribute to Agile team ceremonies, working to ensure they provide input and value to the team. 
• Actively contribute to quality assurance improvements and initiatives. 
• Provide guidance on QA processes, product knowledge as well as test automation knowledge to the Agile team. 
• Review test automation scripts, as well as monitoring failed test cases and maintain its correctness and efficiency. 

Skills we’re looking for

Technical Skills 

• Strong experience in testing web-based and API-based applications, with a focus on automation-first quality practices. 
• Hands-on experience with modern test automation frameworks such as Playwright, Selenium or Cypress, with the ability to design and maintain scalable UI and API test suites. 
• Experience using API testing tools (e.g., ReadyAPI, Postman, or similar), including creating data‑driven API tests — transferable tooling skills are valued over specific products. 
• Proficiency in building and maintaining automation frameworks using Page Object Model (POM) and data‑driven test design patterns. 
• Knowledge of CI/CD processes and experience integrating automated tests into pipelines such as Azure DevOps or GitHub Actions. 
• Experience with performance testing using JMeter, ideally executed and managed through Azure Load Testing. 
• Strong exploratory testing skills and a solid understanding of risk‑based testing approaches. 
• Excellent analytical skills for reviewing acceptance criteria, identifying test gaps, and ensuring effective test coverage. 
• Experience working within Agile development teams and contributing to continuous quality practices. 
• Familiarity with cloud platforms — experience with Azure is beneficial, and experience with or willingness to learn AWS is advantageous as we transition. 
• Openness to using AI-assisted development and testing tools, including GitHub Copilot, to accelerate analysis, test creation and automation workflows. 

Interpersonal Skills 

• Excellent verbal and written communication skills in English, enabling effective collaboration within cross‑regional Agile teams. 
• A demonstrated ability to work as a team within a fast-paced team. 
• Flexible, resilient and able to change focus on demand. 
• Self-motivated and enthusiastic. 
• Demonstrated ability to learn quickly within a continually changing, challenging environment. 
• Ability to prioritise and to work independently, takes ownership of own workload. 
• Ability to guide or coach team members on QA related skills and knowledge. 
• A focus on thorough software quality and documentation, takes pride in high-quality product releases. 

To find out more

As an equal opportunity employer, we are dedicated to creating a diverse and inclusive workplace where everyone feels valued and empowered. Please inform your GBG Talent Attraction Partner if you require any reasonable adjustments to the interview process.

To chat to the Talent Attraction team and find out more about our benefits and why we’re a great place to work, drop an email to behired@gbgplc.com and we’ll be in touch. You can also find out more about careers at GBG and check out our current opportunities at gbgplc.com/careers.   

Key Responsibilities

Develops and applies quality standards in accordance with company and customer requirements. Develops and conducts related tests.

Designs and implements methods and procedures for inspecting, testing, and evaluating the precision and accuracy of products and/ or production equipment.

Develops methods and parameters, project methodology and/ or project proposals.

Develops and uses procedures.  Prepares documentation for inspection/ testing procedures. Recommends corrective action for procedural, product, or process deficiencies.

Analyze operational data; Develop and implement recommendations.  Participates in and may lead audits. 

Evaluates work methods, procedures and policies. Tracks progress of qualification status, reviews reliability test results, determines disposition of non-compliant products, reviews and releases qualification packs 

Utilizes drawings, specifications, industry standards, and sketches, adapting inspection measuring devices and procedures when necessary. Read and interpret technical drawings and specification requirements.

Reduces qualification cycle time and cost while still meeting quality performance requirements. 

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Key Responsibilities

Develops and applies quality standards in accordance with company and customer requirements. Develops and conducts related tests.

Designs and implements methods and procedures for inspecting, testing, and evaluating the precision and accuracy of products and/ or production equipment.

Develops methods and parameters, project methodology and/ or project proposals.

Develops and uses procedures.  Prepares documentation for inspection/ testing procedures. Recommends corrective action for procedural, product, or process deficiencies.

Analyze operational data; Develop and implement recommendations.  Participates in and may lead audits. 

Evaluates work methods, procedures and policies. Tracks progress of qualification status, reviews reliability test results, determines disposition of non-compliant products, reviews and releases qualification packs 

Utilizes drawings, specifications, industry standards, and sketches, adapting inspection measuring devices and procedures when necessary. Read and interpret technical drawings and specification requirements.

Reduces qualification cycle time and cost while still meeting quality performance requirements. 

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Mechanical / Precision Engineering or relevant
• Min 5 years of experience in Oil & Gas industry with experience in Supplier Quality
• Oversea travelling is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

- Obtain immediate containment, root cause and corrective action(s) on defects discovered at incoming inspection / manufacturing floor.

- Work closely with Buyers and Vendors to close out defect cases

- Drive internal corrective action with immediate disposition for defects deemed responsibility.

- Drive continuous improvement throughout supply base to meet quality and corporate goals.

- Perform supplier assessments and audits as required by audit plans.

- Guide new vendors and enforcing requirements to meet world class Quality standards

- Provide presentation materials for the following meetings: Board of Directors, Quality, Supplier and Manufacturing.

- Hold Quality Performance Review with vendors

- Make MRB decisions and drive immediate actions by working with responsible engineers.

- Responsible for measuring and hiting all inspection metrics including incoming defect rate,

ship to stock rate, inspection backlog and SCAR metrics.

- Responsible for Quality performance to Goals 5S/Safety requirements.

- Responsible for departmental compliance to division’s ISO9000 Quality System and all associated procedures, including engineering drawings, assembly and test procedures, etc.

- Responsible for the assessment, development and execution of inspection schedules in accordance with company requirements

- Manage safety reporting for the department.

- Well versed in inspection techniques in order to perform first article inspections and production validation of piece part components and assemblies during source inspection

- Familiar with inspection equipment from vernier to complex CMM layout inspection to perform source inspection at vendor’s site where necessary

- Electrical / electromechanical experience preferred

- Experience in driving quality improvement for mechanical commodities such as machining, sheet metal, frames or consumables

- Experience in driving quality improvement for electrical commodities such as PCBA, box build, cable & harness

- Able to interpret complex mechanical & electrical drawings and geometric tolerancing

Interested candidates, please email your resume to annasee@recruitexpress.com.sg

Anna See Sing Yee

CEI Reg R25157535

Recruit Express Pte Ltd

EA License No: 99C4599

We regret that only shortlisted candidates will be contacted

• Obtain immediate containment,root cause and corrective action(s) on defects discovered at incoming inspection / manufacturing floor.
• Work closely with Buyers andVendors to close out defect cases
• Drive continuous improvementthroughout supply base to meet quality and corporate goals.
• Perform supplier assessmentsand audits as required by audit plans.
• Provide presentation materialsfor the following meetings: Board of Directors, Quality, Supplier and Manufacturing.
• Hold Quality Performance Review with vendors
• Make MRB decisions and drive immediate actions by working with responsible engineers.
• Responsible for measuring and hitting all inspection metrics including incoming defect rate, ship to stock rate, inspection backlog and SCAR metrics.
• Responsible for Quality performance to Goals 5S/Safety requirements.
• Responsible for departmental compliance to division’s ISO9000 Quality System and all associated procedures, including engineering drawings, assembly and test procedures,etc.
• Responsible for the assessment, development and execution of inspection schedules in accordance with company requirements to ensure schedule attainment.
• Manage safety reporting for the department

⭐ Apply now !! ⭐

Interested candidates, please email your resume to shermainesoo@recruitexpress.com.sg

Shermaine Soo Yi Ning

CEI Reg R1877837

Recruit Express Pte Ltd

EA License No; 99C4599

We regret that only shortlisted candidates will be contacted

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Oversea travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job description

• Test program development for Digital, PMIC, RF & Mixed Signal products on ATE (primarily on Advantest 93k - SmarTest 7, SmarTest 8 / Teradyne UFLEX)

• Work closely with the design engineers on the first silicon debug, device characterization, test program bring up and production release activities

• Debug of digital vectors (JTAG/SCAN/ATPG / Functional / Mbist) and Device characterization across PVT (Process, Voltage and Temperature)

• Understanding and experience in characterization of Mixed Signal IP (ADC, DAC, PLL and etc.)

• Involve on test program hand off, production release, yield improvement and test time reduction

• High level of collaboration and interaction with diƯerent Product Engineering, Design Engineering, Quality Engineering, and Foundry Engineering teams.

Job Requirements

• Graduates from Diploma/ Degree in Electronics / Electrical Engineering

• Minimum 2-5 yrs relevant experience on the Test Engineering is preferred

• Hands on experience on Teradyne Ultra Flex or Advantest 93K ATE’s is added advantage.

• Good Knowledge of analog and digital electronics is desired.

• Strong analytical and problem solving ability with desire to perform hands-on work within a lab environment is a must.

• Very strong verbal and written communication skills and able to work independently

• Only Singaporeans/ SPR preferred.

Job Description & Requirements

Roles and Responsibilities

· Preparing inspection testing plan for all welding activities

·Conducting material inspection and material traceability

·Prepare, review of Welding Procedure Specifications (WPS) based on ASME and EN Standards ·Conduct a welding procedure and welder qualification tests

·Coordinate with client inspector for site & workshop inspection activities for piping, structural and equipment like heat exchangers pressure vessel, column

·Review the calibration status and keep a calibration log of test equipment

·Verify in process inspection, final inspection and welding

·Carry out Welding control and inspection . .

·Record result of inspections and maintain records of specific items as per client specifications ·Raise RFI request to Client and 3rd party and coordinate for inspection as identified ITP hold points

·Reviewing incoming material with Mill test certificates, Dimensional check and physical condition check

·Checking and verifying of receiving materials (pipes, flanges, fitting, Valves & Equipment, etc.,,) as per MTO, ensure that materials are correct according to the specification and description upon received

·Conduct inspection during all phases of fabrication, prior welding, during welding and after welding preparing Daily Welding Reports (DWR)

·Witnessing nondestructive testing (NDT) activities to follow up and confirm repairs, re-testing and re-inspection in accordance with specifications

·Witnessing post weld heat treatment (PWHT), Heating method & temperature record system ·Witnessing positive material identification (PMI), verify that all PMI of material has been performed as per specification

·Reviewing of RT, UT, MT, PT, PMI, PWHT & Hardness Test Reports

·Preparing welding surveillance report as per client requirement

·Prepare the of weld & NDT summary

·Completing/Endorsing all inspection records from initial inspection to final acceptance of weld joints

·Coordination with Client/its Representative /Third party inspector/ Suppliers for inspection requirements of the project

·Review hydro-test procedure and preparing hydro-test packages and spool release & Weld History documents

·Ensure that calibration certificate of test instruments such as pressure gauge, relief valve, manifold, pressure and temperature recorder prior to hydro test

·Ensure that the correct rating gaskets are installed

·Ensure that the A- punch list items Shall be closed before hydro test

·Witnessing & visual Inspection of pipeline internal cleaning /gauging

·Witnessing valve Hydro test in different ratings

·Witnessing valve installation, spool installation and bolt tightening

·Witnessing of pneumatic test, hydro-test, flushing

· Line check before commissioning activities and assist in Punch list preparation and punch list items closing

·Coordination with construction Team for Re-Instatement activities

·Preparing and maintaining QA/QC documents and final test packages for system lay-up.

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in QC/ Audit
• Extensive travelling is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Summary

You will lead end-to-end testing activities for an integrated epayment system, driving test automation and quality assurance throughout the development lifecycle to ensure robust, secure, and efficient system delivery.

Responsibilities

• Plan and execute comprehensive testing activities for an integrated epayment system, ensuring alignment with business and system requirements
• Analyze requirements to design, develop, and execute detailed test cases and procedures
• Prepare and maintain test environments to support effective testing operations
• Develop and implement automated test solutions using scripting or programming languages to enhance test efficiency and coverage
• Create traceability matrices to map test cases to requirements, identify gaps, and address them proactively
• Log, track, and manage defects through to resolution, collaborating with stakeholders to ensure quality outcomes
• Conduct test reviews with internal and external teams to validate test coverage and results
• Perform root cause analysis on production and user acceptance defects to improve testing processes and prevent recurrence
• Develop clear design documents and user manuals to guide testers and stakeholders in using test automation solutions
• Implement and maintain automated testing pipelines within DevSecOps frameworks to integrate functional, performance, and basic security testing throughout the development lifecycle

Required competencies and certifications

• Tertiary qualification in Information Technology or Engineering
• Minimum 3 years of experience executing testing and developing test automation solutions for device-based (UI or embedded) and/or back-office systems, covering the full system development lifecycle
• Proficient written and verbal communication skills to collaborate effectively within teams and independently

Preferred competencies and qualifications

• Certification in software testing
• Experience with Micro-payments or Automatic Fare Collection systems using Smart Cards, including System Integration Testing, User Acceptance Testing, and Performance Testing
• Familiarity with DevSecOps tools such as Confluence, Jira, Xray, GitLab CI/CD, or similar platforms with security plugin integration
• Experience in API security testing automation and microservices security validation

Other Information

• Working Location Arrangement: The working location shall be at either the Authority’s Bedok Campus or Site Office (Kim Chuan Depot).

Key Responsibilities

• Develop test strategies, test plans, and detailed test cases based on functional and technical requirements
• Perform manual testing including functional, regression, integration, and system testing
• Execute API testing using tools such as Postman
• Design and maintain automation scripts using tools such as Selenium, Cypress, or Playwright
• Perform performance testing using JMeter
• Support User Acceptance Testing (UAT) and coordinate with business stakeholders
• Track, report, and manage defects using tools such as JIRA or similar
• Participate in Agile/Scrum ceremonies including sprint planning, daily stand-ups, and retrospectives
• Work closely with developers, product owners, and project managers to ensure quality deliverables
• Ensure compliance with SDLC processes and quality standards

Requirements

• 3 years of experience in software testing (manual + automation)
• Strong experience in test planning and test case design
• Experience in functional, regression, integration, and system testing
• Hands-on experience with API testing tools such as Postman
• Experience in automation tools such as Selenium, Cypress, or Playwright
• Exposure to performance testing tools such as JMeter
• Good understanding of SDLC and Agile methodologies
• Experience using defect tracking tools (e.g., JIRA, Azure DevOps)

Position involves test program development,characterization, data analysis, and silicon debug, preferably with experiencein area of Test Program, Fuse and characterization program generation, hardwareDIB design requirements, and support of IP level tests bring up in leading edgeprocess technologies.

KEY RESPONSIBILITIES:

·    Test patterns & test flows development, debug, test and characterization

·    Experience skillsets include ATE Test Program development 93K, PBI (Post Burn-in) test program, ATE test methodologies development, DIB design, Fuse module tests, Thermal module tests.

·       Characterization and debug of new silicon designs and process technologies

·       Optimization of test coverage and flows for increased quality, yield, cost improvement, and test time reduction

·       Analysis of part failures leading to testcoverage improvement

·       Analysis of characterization data

Soft Skills:

·               Strong problem-solving, communication, and teamwork skills.

Self-motivated and independent, with excellent interpersonal abilities.

 PREFERRED EXPERIENCE:

·                5 years or more industry experience

·                Good communication skills including data analysis and presentation

·                Unix and Windows proficiency and Java, Perl, Python scripting skills

·                ATE Test handling/ execution and development experience - Advantest V93K experience preferred.

·                Some IP knowledge, development and debug experience will be advantage

·                Unix and Windows proficiency and Java, Perl, Python scripting skills

·                ATE Test handling/ execution and development experience - Advantest V93K experience preferred.

·                Some IP knowledge, development and debug experience will be advantage