Total 1,491 technical support engineer job vacancies in Others category

Job Description & Requirements

• Liaise with Clients, Consultants, and Authorities for management of the project
• Must have the experience in Diaphragm wall and pilling
• Perform Civil/Structure engineering design works
• Responsible for on-site technical / engineering / administrative matters
• Involve in project planning, implementation, and close monitoring of projects
• Determine best materials and methods with Professional Engineers
• Liaise with Architects on design and safety of the structure
• Analysis of structural components with engineering software
• Prepare drawings, specifications, and computer models of the structure
• Ad-hoc duties as assigned by the Senior Engineer

Requirements:

• Candidate must possess at least Degree in Civil/Structural Engineering
• Minimum 8 years of LTA experience required
• Required Skill(s): Good communication and interpersonal skills, ability to liaise with all levels of people
• Relevant experience in the design of Buildings, Civil and Infrastructure works
• Preferably with project site co-ordination experience
• Knowledge of engineering software and MS Office

Job Responsibilities

• Apply statistical tools (SPC, DOE, FDC, ECMS) t optimize equipment performance and robustness.
• Establish and optimize Preventive Maintenance (PM) plans to improve equipment quality, cost, and productivity.
• Work with vendors to resolve equipment issues and improve performance.
• Collaborate with Process and Manufacturing Engineers to address yield, WAT, and operational issues.
• Manage spare parts and consumables inventory to support maintenance based on production forecasts.
• Lead new equipment start-up from facility hookup to production acceptance.
• Drive continuous improvement projects to enhance equipment efficiency, reliability, and cost reduction.
• Set targets to minimize wafer scrap, reduce equipment cost per wafer, and optimize utilization.
• Provide training and guidance to AEs and TAs on troubleshooting, equipment knowledge, and risk assessment.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for issue resolution.
• Develop long-term solutions for recurring hardware and operational issues.
• Create and maintain implant operation SOPs and work instructions.

Job Requirement:

• Degree in Electrical / Electronics / Mechanical /Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 3 years of relevant work experience in Diffusion Implant Equipment
• Familiar with all the implant tools: Varian E500,VIISTA900, VIISTA HCP, GSD, Axcelis HE/VHE. AMAT XR80.
• Strong logical thinking capability and good analytical skill
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Description & Requirements

• Liaise with Clients, Consultants, and Authorities for management of the project
• Must have the experience in Diaphragm wall and pilling
• Perform Civil/Structure engineering design works
• Responsible for on-site technical / engineering / administrative matters
• Involve in project planning, implementation, and close monitoring of projects
• Determine best materials and methods with Professional Engineers
• Liaise with Architects on design and safety of the structure
• Analysis of structural components with engineering software
• Prepare drawings, specifications, and computer models of the structure
• Ad-hoc duties as assigned by the Senior Engineer

Requirements:

• Candidate must possess at least Degree in Civil/Structural Engineering
• Minimum 8 years of LTA experience required
• Required Skill(s): Good communication and interpersonal skills, ability to liaise with all levels of people
• Relevant experience in the design of Buildings, Civil and Infrastructure works
• Preferably with project site co-ordination experience
• Knowledge of engineering software and MS Office

JobDescription:

The IT Support Specialist is to provide technical support to our enterprise customers.The ideal candidate will be deployed offsite and will be on a 5-day work week schedule. He/She will be grown to lead a team if the performance is outstanding.

Responsibilities:

• Provide advanced support for Windows 11
• Manage device provisioning, configuration, imaging, and deployment for Windows environments.
• Perform break-fix support for hardware, software, and mobile devices.
• Troubleshoot and resolve:
• BitLocker / File vault encryption issues
• BSOD/crash diagnostics
• Administer Intune for device management  and deployment.
• Install, upgrade, and maintain operating systems, applications, and peripherals.
• Handle O365 support, including Word, Excel, Outlook, PowerPoint, and Access.
• Perform basic network troubleshooting, including switches, wired/wireless connectivity.
• Collaborate with internal IT teams to ensure seamless service delivery.
• Work within a ticketing system to manage multiple tasks in a fast-paced environment.

DesiredSkills & Experience:

• Minimum 1 year of IT support experience in enterprise environments.
• Strong knowledge of Windows 11, BitLocker, and imaging tools.
• Proficiency in troubleshooting hardware issues and replacing components.
• Familiarity with Microsoft Office Suite and O365 administration.
• Understanding of network fundamentals and connectivity troubleshooting.
• Excellent customer service and communication skills.
• Ability to work under pressure and manage multiple tickets simultaneously.

Education:

• 1+ years of work experience with Microsoft Intune

• 1+ years of work experience with Windows

*We regret that only shortlisted candidates will be notified.

The Analyst, Operations (Rep Support) will play a critical role in ensuring smooth onboarding, offboarding, and ongoing support for representatives. The role involves handling all rep-related operational tasks, queries, and follow-ups to maintain high efficiency and service quality. This position requires strong attention to detail, organizational skills, and the ability to manage multiple tasks independently.

Key Responsibilities:

• Take care of the end-to-end onboarding and offboarding processes for representatives, including documentation, system setup, and timely creation of agent codes.
• Send rep confirmation notices upon successful onboarding and follow up on offboarding debts for recovery.
• Take care of CRM rep data, including setup and maintaining updated records.
• Liaise with internal departments to ensure smooth transitions and coordination for rep-related processes.
• Act as the point of contact to ensure timely and effective support for representatives.
• Resolve enquiries efficiently and escalate issues where required.
• Track and maintain records of rep support requests and resolutions.
• Review and streamline workflows to improve efficiency and service quality.
• Ensure timely and accurate retrieval, archiving, and reporting of documents.
• Assist with ad hoc operational projects as assigned by management.

Requirements:

• Meticulous, detail-oriented, and able to meet deadlines consistently.
• Strong proficiency in MS Office, particularly Excel.
• Excellent organizational and communication skills.
• Ability to work independently and collaboratively as part of a team.
• Fresh graduates are welcome to apply; prior operations or insurance experience is a plus.

By submitting your job application, you give consent that SGA and any affiliates and any person authorised by SGA is allowed to use your personal data for assessing and evaluating your suitability for employment in any current or prospective positions within SGA.

Job Description

• Design, analysis and plan for Civil & Structural engineering works
• Prepare design calculations, drawings and carry out Authority submissions
• Responsible for timely submission of plans and reports to Consultant and Authorities
• To coordinate & liaise with consultant, sub-con and other trades eg M&E and architectural for projects specifications & other technical issues
• To assist in project coordination and oversee of all structural/Civil works on site and ensure all related activities are carried out as per drawings
• Attend meetings inclusive technical meetings (not withstanding to minutes down the meeting if necessary) and site walks during the construction phase of project
• Keep track of test reports, tests, ST, Green Mark scheme and constructability scheme
• Document control and compilation accordance to company ISO standard

Requirements

• Degree in Civil/Structural Engineering / Building
• Min 5 years structural coordinator experience in building construction Project
• Good knowledge of Structural specifications & requirements
• Preference will be given to those who can commence immediately

Job Description

• Planning, design, assembling and installing equipment and facilities.
• Coordinate and liaise with main con, consultants, sub-contractors.
• Supervise and check subcontractors’ works according to design drawings, specifications and regulation.
• Plan and prepare projects based on stage of activities, schedule work activities.
• Reporting to electrical engineer if discrepancies in safety measures or installation procedures are found and take steps to solve the problem.
• Check and ensure the equipment and material offered in compliance with the specification and drawings.
• Oversee and be overall responsible for works carried out by supervisors assigned under his/her care.
• Generate incident reports
• Perform all other duties as assigned and required.

Requirements

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic) or equivalent.
• At least 3 year(s) of working experience in the construction or Electrical related fields is required for this position.
• Required Skill(s): Microsoft Office, Microsoft Project, Autocad, Project Management
• Preferably Junior Executive
• specialized in Engineering- Electrical or equivalent.

Position Summary
The Process Engineer (Thin Film) is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.
• Other ad-hoc duties as assigned

Requirement

• Minimum bachelor’s degree in Materials Science, Microelectronics, Chemical Engineering or relevant disciplines
• Minimum 3 years hands-on working experience in thin film process
• Experience working in Wafer-level Fanout packaging production line or LCD/FPD production line preferred
• Experience in process engineering, process control engineering and yield enhancement
• Experience in SPC, DOE, FEMA, and 8D reports

Responsibilities:

• Produces complete controls solutions and electrical design packages based on customer specification, and standardized design practices.
• Formulates and produces complete electrical design package such as detailed schematics, cable routing diagrams, panel layouts, bills of materials, and purchase of material.
• Designs and implements HMI or PLC programs specific to customer and project requirements.
• On site testing and commissioning (local & overseas).
• Document control, project monitoring and provide solution for any technical and functional problems.

Requirements:

• Degree in Control & Instrumentation/Electrical/IT Engineering or equivalent discipline.
• Strong trouble-shooting, problem-solving skills.
• Knowledge of PLCs, HMI and VFD would be an advantage.

Position Summary

The Process Engineer (Lithography) is responsible for the development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line for lithography process
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.
• Any other ad-hoc duties as assigned.

Requirements

• Minimum Bachelor’s Degree in Materials Science, Microelectronics, Chemical Engineering or relevant engineering degrees.
• Minimum 3-years hands-on Lithography process experience in area of in the Wafer-level Fanout packaging production line or LCD/FPD production line.
• Knowledge in process engineering, process control engineering and yield enhancement.
• Experience in SPC, DOE, FMEA, and 8D reports

about the company

A leading financial institution in Asia with an extensive global network and a heritage spanning over eight decades. This organization is committed to driving digital transformation and innovation within the banking sector, fostering a team-based culture focused on long-term success and excellence in customer service.

about the job

Take the lead on a major digital transformation project focused on enhancing cross-border payment capabilities and mobile banking infrastructure.

• Direct the end-to-end delivery of testing services for a high-priority digital payments initiative.

• Oversee the performance and output of appointed external service providers to ensure alignment with organizational quality standards.

• Collaborate with diverse internal stakeholders across infrastructure and security to meet project milestones and technical requirements.

• Monitor and report on key performance indicators and service level agreements to maintain high delivery standards.

• Act as the primary point of contact for issue resolution and escalation within the digital domain.

skills and experience required

• At least 10 years of experience in test delivery within large-scale, complex environments, specifically in the financial services sector.

• Demonstrated expertise in managing multiple external vendors and third-party service providers.

• Proficiency in modern delivery methodologies including Agile, DevOps, and Waterfall.

• Technical familiarity with industry-standard testing tools such as Selenium, JIRA, or mobile automation frameworks.

• Strong leadership capabilities with a track record of managing diverse, multi-cultural teams.

Please click on the 'apply' button to apply online. For more information, please reach out to Amrita Chandran. (EA: 94C3609 / R1440037)

.Supervise project team and sub-contractors to take positive actions and accountability for their assigned work and complete their works on time as per agreed.

· Liase with Client, Consultants and Project team for planning, executive and completion of projects.

· Manage and supervise the team of technical staff and subcontractors carry out maintenance services, schedules, improvement works . To make sure standards of building performance, quality, time and cost schedules and safety complied.

· Leading monthly meetings and submission of routine reports.

· Oversea and overall responsible for works carried out by Junior Supervisors assigned.

· Responsible for keeping daily work schedule.

· Attend regular meetings with client , supplier and sub-contractors.

· Analyze, manage and track projects costs against budget

As a Senior High Bandwidth Memory Test Engineer at Micron, you will develop, debug, and maintain code that enables the parallel testing of advanced memory devices. Micron Test Engineers support R&D, interacting closely with global teams, as well as taking part in the designing and debugging of test hardware. In this position, you will constantly learn new device specifications and operations in order to develop efficient and innovative solutions of production test flows thru test algo optimization. Additionally, you will take responsibility to gain a firm understanding of the functionality of advanced memory devices as defined in product data sheets.

RESPONSIBILITIES AND TASKS:

• Experienced of definition of Test Plans for new tests and test algorithms for HBM, which covers test software and hardware requirements, defect coverage, characterization, trending, process flow, and test times.

• Experienced on test programs development for products using primarily Python and C coding on automated test equipment in the given area followed by test program release to manufacturing area.

• Demonstrate a thorough understanding of the device/part as it applies to device/part testing.

• Ensure all test programs, scripts, and any other software adhere to the release quality standards. 

• Independently debug and identify root causes on test issues and provide solutions across internal/external groups.

• Provide meaningful statistical data analysis, analytics and justification on program validation and its release to ensure program quality.

• Evaluate and verify yields/quality with global teams to ensure we are shipping the highest quality product to our customers with enforce to all data sheet specifications.

• Support both internal and external groups on experiments designed to improve yield or capacity by resolving test issues that impact site in a timely manner.

• Drive Innovation and Improvement with the end goal of reducing the Cost of Test for Micron in the Test Department.

• Support intra-departmental (and multi-site) teams in development of new processes and capabilities to support product roadmap; lead teams and drive development where necessary.

• Communicate effectively with both internal and external customers Implement Solutions to Issues Related to Probe and Test processes in a Timely Manner 

• Demonstrate ability to leverage on existing resources Serve as a Liaison and Coach 

• Actively share and/or present technical information to a wide variety of audiences, including formal presentations (when necessary) to area, department, site, or larger industry groups 

REQUIREMENTS:

• Bachelor’s Degree in Electrical, or Electronics Engineering 

• Minimum 5 years of experience in test solution engineering in semiconductor industry.

• Experienced in digital systems and digital logic for DRAM or HBM.

• Strong logical thinking and problem solving.

• Display Micron Value of People. Innovation, Tenacity, Collaboration and Customer Focus
  

  Directs and coordinates engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment and control devices. Determines conditions under which tests are to be conducted, and phases of test operations. Coordinates operational, functional and performance phases of tests. Analyzes and interprets test data. Prepares technical reports of for use by engineering personnel.

Job Description

• Comply with the local construction code and approved Quality document
• Assist project teams to identify quality requirements and develop Project Quality Plans for projects
• Conduct inspection reports for all subcontractors work to ensure alignment with the quality standards
• Assist Project Teams with control vendor performance/non-conformance issues and implement actions to correct non-compliance
• Prepare and submit Request for Inspection (RFI) to consultant prior to official QA/QC inspection and testing activity
• Carry out the execution of the project as per plan
• Register all incoming materials and items for the project
• Responsible for managing day to day lifting operations
• Plan, organize, supervise and liaise closely with sub-contractors and operation teams on all ongoing lifting activities
• Conduct routine checks and inspections of works on site to ensure compliance with authorities' and client’s requirements
• Review project safety (e.g. lifting plans, etc.)
• Other ad hoc duties as assigned

Job Requirements

• Degree in Civil Engineering or equivalent
• At least 5 years of working experience in the related field is required
• Ability to work with tight deadlines
• Work closely with project team to resolve technical issues
• Good attitude and communication skills
• Willing to multi-task
• Need to be stationed at site
• Willing to work 6 days at project site
• Location: East

ROLESUMMARY

The Platform Operations Engineer is responsible for managing, maintaining, and optimizing enterprise platforms and environments to ensure stability, performance, and scalability. The role focuses on platform reliability, automation, and continuous improvement across cloud and on-premises systems in mission-critical and regulated environments.

KEYRESPONSIBILITIES

· Manage and support platform environments across development, testing, and production.

· Monitor platform health, performance, and availability; ensure proactive issue resolution.

· Provide L2/L3 support for platform-related incidents, service requests, and escalations.

· Perform deployment support, environment configuration, and release validation.

· Automate platform operations, provisioning, and maintenance tasks.

· Ensure high availability(HA), backup, and disaster recovery (DR) readiness.

· Troubleshoot system, application, and integration issues across the platform stack.

· Manage configurations, patches, and upgrades of platform components.

· Support CI/CD pipelines and ensure smooth deployment processes.

· Maintain platform documentation, runbooks, and operational procedures.

· Collaborate with DevOps, infrastructure, and application teams for continuous improvement.

· Ensure adherence to SLAs, operational standards, and governance processes.

TECHNICALSKILLS & TOOLS

· Platforms: Linux/Unix, Windows, middleware, application servers (WebLogic, Tomcat, JBoss)

· Cloud: AWS, Azure, GoogleCloud (platform services)

· Containers: Docker, Kubernetes

· DevOps & Automation: Jenkins, GitLab CI/CD, Terraform, Ansible

· Monitoring: Prometheus, Grafana, ELK Stack

· Scripting: Python, Bash, PowerShell

· Databases (Basic): SQL, database connectivity and troubleshooting

SECURITY& COMPLIANCE

· Implement platform-level security controls and access management.

· Ensure patching, hardening, and compliance with ISO 27001 and security policies.

· Monitor logs and support incident response activities.

· Support audits and governance requirements.

QUALIFICATIONS& EXPERIENCE

· Degree/Diploma in IT, Computer Science, or related field.

· 3–7 years of experience in platform operations or system engineering.

· Experience in cloud or hybrid environments preferred.

· Strong troubleshooting, automation, and collaboration skills.

PREFERRED(GOOD TO HAVE)

· Experience with SRE practices and platform reliability engineering.

· Certifications in cloud(AWS/Azure/GCP) or Kubernetes.

· Exposure to microservices and cloud-native architectures.