Total 112 construction supervisor job vacancies in Maintenance / Repair category

Responsibilities:

• Supervise and lead a team of electrical technicians and contractors in the installation, maintenance, and repair of electrical systems and equipment
• Drive the structured On-the-Job Training (OJT) programme for E&I team members to support skills development and competency building
• Conduct site inspections and quality control checks for all electrical works to ensure strict compliance with relevant local and international electrical codes, specifications and standards
• Review and approve electrical-related permits, including electrical isolation, excavation, and instrument-related work permits
• Lead investigations into electrical maintenance issues or abnormalities to determine root causes, propose solutions, and implement corrective actions
• Collaborate with electrical engineers to develop and execute preventive and predictive maintenance programs to enhance equipment reliability and address maintenance concerns
• Conduct daily toolbox meetings to reinforce safety practices and ensure smooth coordination of maintenance activities

Requirements:

• Diploma in Electrical, Electronic, Instrumentation, Chemical Engineering or equivalent
• Minimum 8 years of supervisory electrical and maintenance experience, preferably in oil and gas, petrochemical or related industries
• Strong technical expertise in low and medium voltage electrical systems, power distribution, network communication systems, motors, Closed-Circuit Television (CCTV) and security systems, earthing, lightning protection, and Programmable Logic Controllers (PLCs). Experience with Distributed Control System (DCS) is an added advantage.
• Familiarity with industry codes and standards such as International Electrotechnical Commission (IEC), Institute of Electrical and Electronics Engineers (IEEE), National Electrical Code (NEC), and SS (Singapore Standards)
• Physically fit and able to participate in emergency response duties

Role Summary

Lead and/or execute preventive maintenance(PM), corrective works, and emergency response across medium-voltage (MV) ringmain units (RMUs) and industrial burner-related mechanical/electrical systems. Ensure all works are carried out safely under Permit-to-Work (PTW), meet technical specifications, and are fully documented for client acceptance and billing.

Key Responsibilities

1) Field Service & Troubleshooting

·      Attend customer sites for breakdown support; coordinate safe isolation, access, and permits before work starts.

·      Troubleshoot electrical and mechanical faults within competence; escalate safety-criticalcommissioning/tuning when required.

·      Provide clear updates to clients on findings, risks, and recommended rectification actions.

2) RMU / Substation Maintenance (22 kV / 6.6 kV and associated equipment)

·      Plan and execute PM and servicing activities to maintenance manuals and client specifications.

·      Supervise and coordinatetechnicians/contractors on-site: manpower planning, task allocation, toolbox briefings, and workmanship checks.

·      Oversee insulating oil activities (where applicable): draining, internal cleaning, foreign object checks, refilling/topping-up, and record oil quality checks.

·      Ensure required testing is performed and recorded (e.g., dielectric strength, insulation resistance, partial discharge checks) and that test instruments are within calibration.

·      Coordinate urgent/emergencyrectification works and mobilise within required timeframes when on-call.

3) Burner / Industrial M&E Service Support

·      Perform PM visits using checklists; document condition, parts used, and improvement recommendations.

·      Support service activities forburners/burner controls and related components (e.g., ignition, controls,gas-train components) where trained.

·      Identify correct replacement parts and provide feedback for stocking/kitting decisions.

4) Safety, Quality & Documentation

·      Enforce PTW workflows, safe work procedures, and PPE compliance; stop unsafe work immediately.

·      Produce clear service reports(photos, test results, action items) and obtain customer sign-off.

·      Prepare and submit completion documentation: checklists, test reports, claim forms, and supporting evidence for client Completion Certificates and invoicing.

5) Tools, Spares & Housekeeping

·      Maintain tools/test equipment and PPE in good condition; ensure calibration status is valid before use.

·      Manage spares and consumables: track usage, maintain critical spares readiness, and raise requisitions as needed.

Requirements (Must-Have)

·      Diploma/ITE in Electrical Engineering, Mechanical Engineering, Mechatronics, Building Services/M&E, or equivalent technical qualification.

·      Hands-on maintenance/serviceexperience (e.g., MV switchgear/RMUs, substation equipment, industrial M&E systems, controls, pumps, instrumentation).

·      Good understanding of PTW workflows, basic risk control practices, and field safety supervision.

·      Able to read technicaldrawings/manuals, follow checklists, and write clear job reports.

·      Customer-facing communication and professional on-site conduct.

·      Physically fit for field work; willing to travel to customer sites in Singapore; able to support urgentcall-outs when required.

Nice-to-Have

·      Experience with MVswitchgear/RMU servicing and insulating-oil handling (training can be provided depending on site needs).

·      Exposure to burners/boilers, burner controls/ignition components, fuel-train components, pumps, or industrial controls.

·      Valid Class 3 driving licence.

Working Conditions

·      Worksites: client substations, switchrooms, and industrial/commercial facilities (islandwide).

·      Work hours typically aligned to client working hours; overtime/after-hours works may be required for outages and urgent rectification.

·      Occasionalconfined/limited-access switchroom work and strict adherence to site safety controls.

Job Summary

To supervise and coordinate facilities maintenance activities, leading a team of technicians and technical officers to ensure smooth M&E operations and timely resolution of maintenance issues.

Responsibilities

• Lead and coordinate preventive and corrective maintenance activities to ensure operational efficiency of building facilities and M&E systems
• Manage and guide a team of technicians and technical officers to deliver effective maintenance and repair services
• Liaise and collaborate with subcontractors and vendors to oversee projects, maintenance, repair, shutdown, and overhaul works, ensuring quality and timeliness
• Conduct regular inspections of building premises, systems, and equipment to identify maintenance needs and ensure compliance with safety standards
• Prepare and submit costings and quotations to support project and maintenance budgeting as needed
• Respond promptly to user requests and feedback on fault issues, coordinating with the team to achieve timely resolution
• Perform routine inspections and maintenance of electrical facilities and services, maintaining accurate maintenance checklists and records
• Assist the safety team by conducting risk assessments in line with Workplace Safety and Health policies and practices
• Utilize Microsoft Office applications proficiently to document and report maintenance activities and communications

Required competencies and certifications

• Minimum Higher Nitec in Mechanical/Electrical Engineering or Building Services
• Minimum 3 years of relevant working experience in the Facilities Management industry, including at least 3 years in M&E Facilities Maintenance

Preferred competencies and qualifications

• Diploma or Degree in any Facilities Management related qualification
• Strong technical knowledge of building maintenance and M&E systems including Electrical, ACMV, Chiller, and Fire Protection systems
• Effective communication skills and ability to work collaboratively within a team

Other Information

• Work schedule: 5.5 work days per week

• Supervise and lead a team of electrical technicians and contractors in the installation, maintenance, and repair of electrical systems and equipment
• Drive the structured On-the-Job Training (OJT) programme for E&I team members to support skills development and competency building
• Conduct site inspections and quality control checks for all electrical works to ensure strict compliance with relevant local and international electrical codes, specifications and standards
• Review and approve electrical-related permits, including electrical isolation, excavation, and instrument-related work permits
• Lead investigations into electrical maintenance issues or abnormalities to determine root causes, propose solutions, and implement corrective actions
• Collaborate with electrical engineers to develop and execute preventive and predictive maintenance programs to enhance equipment reliability and address maintenance concerns
• Conduct daily toolbox meetings to reinforce safety practices and ensure smooth coordination of maintenance activities

Requirements:

• Diploma in Electrical, Electronic, Instrumentation, Chemical Engineering or equivalent
• Minimum 8 years of supervisory electrical and maintenance experience, preferably in oil and gas, petrochemical or related industries
• Strong technical expertise in low and medium voltage electrical systems, power distribution, network communication systems, motors, Closed-Circuit Television (CCTV) and security systems, earthing, lightning protection, and Programmable Logic Controllers (PLCs). Experience with Distributed Control System (DCS) is an added advantage.
• Familiarity with industry codes and standards such as International Electrotechnical Commission (IEC), Institute of Electrical and Electronics Engineers (IEEE), National Electrical Code (NEC), and SS (Singapore Standards)
• Physically fit and able to participate in emergency response duties4 off days monthly, rest days depend on schedule. able to work long hours and late in evenings and weekends
• Competitive salary 3k and above
• Positive and nurturing working environment
• Work location: co office area
• Duration: permanent
• Requirements
• Qualifications - diploma or high school diploma
• Work experience- at least one year working experience in related fields
• Job type- full time
• Required languages: English and able to communicate with mandarin speaking customers
• If you have an interest in applying for this role, please WhatsApp me at 98198786 to apply. Only shortlisted candidates will be notified. Priority will be given to Singaporeans
• Young hon Lim/ manager
• Render private limited
• EA licence no 15c7827
• EA reg no R1550906

Maintenance & Logistics Assistant

Job Responsibilities

Maintenance Coordination

• Coordinate maintenance activities with internal technicians, vendors, and subcontractors to ensure machinery and equipment remain operational.
• Monitor and track preventive maintenance schedules for construction equipment, generators, excavators, vehicles, and other assets.
• Liaise with service providers on repairs, servicing, inspections, and equipment breakdowns.
• Maintain maintenance records, reports, and documentation in the ERP system.
• Monitor equipment readiness and provide regular updates to stakeholders on maintenance status.
• Assist in investigating equipment issues and coordinate corrective actions to minimize downtime.
• Ensure maintenance activities comply with workplace safety requirements and company procedures.
• Prepare weekly and monthly maintenance reports.

Logistics Coordination

• Coordinate transportation arrangements for workers, materials, equipment, and site resources.
• Liaise with transport providers, suppliers, dormitory operators, and project teams to support operational requirements.
• Monitor daily deployment of drivers and vehicles to ensure timely delivery and collection of materials and personnel.
• Verify purchase orders, delivery orders, and related documents for accuracy before collection or delivery.
• Assist in managing workers' transportation, accommodation logistics, and site mobilization arrangements.
• Respond to operational enquiries and coordinate with relevant parties to resolve logistics issues.
• Maintain accurate logistics records and documentation in the ERP system.
• Process timesheets, leave applications, and logistics-related administrative tasks.

General Administration

• Prepare reports, maintain records, and update operational databases.
• Support department initiatives and projects as assigned by management.
• Perform other ad-hoc duties related to maintenance, logistics, and operations support.
  
  
  Job Requirements
• Diploma, Higher NITEC, NITEC, or equivalent qualification in Mechanical Engineering, Logistics, Supply Chain, Facilities Management, or related disciplines.
• Minimum 1–3 years of experience in maintenance coordination, logistics coordination, fleet management, facilities management, or construction operations.
• Experience in the construction, marine, engineering, or industrial sector will be an advantage.
• Familiarity with construction equipment such as excavators, generators, heavy vehicles, or machinery is preferred.
• Proficient in Microsoft Office applications (Excel, Word, Outlook).
• Experience using ERP systems will be an advantage.
• Good coordination, communication, and problem-solving skills.
• Able to work independently and manage multiple tasks in a fast-paced environment.
• Possess a Class 3 driving licence will be an advantage.
• Willing to travel between project sites, dormitories, and company premises when required.

Overview

Our company specializes in façade inspection and rectification services. To enhance operational efficiency, safety, and precision, we are actively developing and deploying robotic solutions to support and augment our inspection and maintenance activities.

Key Responsibilities

• Provide technical support to the team in the development, testing, and deployment of robotic systems.
• Collaborate closely with colleagues from various disciplines, including mechanical, electrical, and software engineering.
• Perform administrative duties such as procurement, inventory management, preparation of checklists, bill of materials (BOMs), and maintenance of project documentation.
• Carry out hands-on technical tasks, including 3D printing, mechanical assembly and disassembly, soldering, electrical wiring, and calibration of hardware components.
• Support operational activities by preparing robots and equipment for deployment, ensuring all checklist requirements are completed, and coordinating logistics and transportation arrangements when necessary.
• Promote and uphold a strong safety culture by identifying and communicating any concerns related to work activities, equipment, or robotic systems.
• Work proactively with the team to achieve project milestones and deliver planned objectives within established timelines.
• Contribute to the continuous improvement of processes, systems, and operational efficiency.

Job Requirements

• Strong teamwork and interpersonal communication skills.
• Well-organized with the ability to maintain accurate and structured documentation.
• Diploma or Degree in Engineering, Robotics, Mechatronics, Electronics, Mechanical Engineering, or a related field is preferred but not mandatory. A positive attitude, strong work ethic, and willingness to learn are highly valued.
• Prior experience in hands-on technical work, robotics, automation, engineering, or façade-related industries will be an advantage.
• Knowledge or skills in mechanical systems, electrical and electronics systems, programming, or robotics are advantageous.
• Familiarity with safety standards and best practices in robotics, engineering, or industrial environments is beneficial.
• Proactive, resourceful, and willing to take initiative to solve problems and drive tasks to completion.
• Passion for robotics, façade technologies, innovation, and problem-solving.
• Enjoy working collaboratively with people and possess a strong attention to detail.
• Fresh graduates and candidates with a keen interest in robotics and engineering are encouraged to apply.

Job Description:

• Investigate, troubleshoot and resolve IT-related issues involving operating systems, software, hardware, networks, printers and scanners.
• Assist in the setup, configuration, maintenance, and troubleshooting of office IT infrastructure including LAN, internet connectivity, routers, switches, wireless access points and NAS system.
• Install, configure, and maintain end-user equipment such as desktops, laptops, monitors and peripherals.
• Assist HR with IT onboarding and offboarding, including granting system access, conducting induction for new hires, and preparing devices.
• Ensure IT security and data privacy practices are followed, including antivirus updates, access controls, and basic security checks.
• Liaise with external IT vendors and service providers for issue escalation, maintenance, and IT-related projects.
• Maintain accurate IT asset tracking, including hardware inventory, software licenses, and equipment lifecycle records.
• Document IT procedures, system configurations, troubleshooting steps, and infrastructure changes.
• Assist the team with ad-hoc IT tasks, projects, and improvements as required.

Job requirements:

• Min Diploma or equivalent qualification in Information Technology, Computer Science, related field.
• Min 2 years of relevant experience preferred.
• Proficient in Microsoft Office applications and Windows operating systems.
• Basic understanding of TCP/IP, LAN technology, DNS, DHCP and network fundamentals.
• Hands-on experience or working knowledge of Synology NAS administration, including backup configuration and access management.
• Knowledge of Internet security and data privacy principles.
• Familiarity with hardware troubleshooting, cabling, and basic network devices is an advantage.
• Strong problem-solving, communication, and time-management skills.
• Proactive team player with the ability to work independently with minimal supervision
• 5 day work week

Job Duties and Responsibilities

1. Perform installation, maintenance, troubleshooting, repair, and servicing of equipment, machinery, systems, or facilities as assigned.
2. Attend to service calls, breakdowns, and emergency maintenance requests promptly and efficiently.
3. Conduct routine inspections and preventive maintenance to ensure equipment operates safely and effectively.
4. Diagnose faults and recommend appropriate corrective actions.
5. Ensure all work is carried out in accordance with company procedures, safety regulations, and industry standards.
6. Complete assigned work orders, service reports, maintenance records, and other required documentation accurately and on time.
7. Maintain tools, equipment, and work areas in a clean, safe, and organized condition.
8. Monitor and report equipment conditions, defects, safety hazards, and maintenance requirements to supervisors.
9. Coordinate with supervisors, customers, contractors, and team members to ensure work is completed efficiently and professionally.
10. Attend assigned work sites and remain available during working hours to perform duties as required.
11. Comply with company attendance requirements, work schedules, and reporting procedures.
12. Assist in inventory control and the proper use of spare parts, materials, and consumables.
13. Participate in training programs and continuously improve technical knowledge and skills.
14. Perform any other duties or responsibilities assigned by management that are reasonably related to the position.

Job Responsibilities

1. Project Leadership & Coordination

• Lead and manage all Instrumentation & Monitoring (I&M) activities throughout the project lifecycle.
• Attend and chair project meetings related to instrumentation, monitoring, and geotechnical performance.
• Act as the primary liaison between project teams, consultants, clients, and authorities on I&M matters.

2. Instrumentation Management

• Plan, coordinate, and supervise the installation, testing, commissioning, and maintenance of geotechnical and structural instrumentation systems.
• Ensure all instrumentation works are carried out in accordance with project requirements, specifications, and industry standards.
• Monitor contractor performance and ensure timely completion of instrumentation activities.

3. Monitoring & Data Analysis

• Review and analyze instrument readings, monitoring results, and trend data.
• Assess ground movement, structural behavior, and excavation performance to ensure project stability and safety.
• Identify abnormal readings and recommend corrective actions where necessary.
• Ensure compliance with ERSS (Earth Retaining or Stabilizing Structures) monitoring requirements.

4. Reporting & Stakeholder Management

• Coordinate directly with QPD/QPS, consultants, and relevant authorities on instrumentation and monitoring matters.
• Prepare and submit monitoring reports, technical assessments, and presentation materials.
• Provide regular updates on instrumentation performance, risks, and mitigation measures.

5. Site Management & Execution

• Work closely with Site Managers, Construction Managers, and project teams to ensure smooth site execution.
• Conduct site inspections to verify installation quality and monitoring effectiveness.
• Support construction activities by providing technical advice based on monitoring results.

6. Quality, Safety & Compliance

• Ensure compliance with project specifications, regulatory requirements, and workplace safety standards.
• Maintain proper documentation, records, and calibration certificates for instrumentation systems.
• Participate in audits, inspections, and technical reviews as required.

Job Requirements

• Bachelor's Degree in Geology, Geotechnical Engineering, Civil Engineering, or a related discipline.
• Minimum 8–10 years of relevant experience in instrumentation, monitoring, and geotechnical engineering within construction, infrastructure, tunnelling, or deep excavation projects.
• Proven experience managing instrumentation installation, monitoring programs, data interpretation, and reporting.
• Experience working with ERSS, deep excavation, tunnelling, or large-scale infrastructure projects is highly preferred.

• Analysis of water-physical, chemical and microbiological parameters
• Analysis of ores and minerals
• Analysis of water, soil, aggregates, concrete and scale samples
• Operation of equipment like pH / EC / TDS meters, UV-visible spectrophotometers, ovens, furnaces, incubators, fusion machines
• Prepare the reagents, standard solution and ensure standardisation of the solution used in the laboratory
• Handling and storage all chemicals as per the Material Safety Data Sheet (MSDS)
• Managing the calibration of glass wares and the instruments
• Performance of qualitative and quantitative laboratory tests and analysis of other substances as per standard method
• Issue reports and receive samples to and from the respective entities
• Involvement in site and field testing with various international standards or in-house procedures
• Ensure work compliance to ISO 17025 requirements
• Coordinating with the other technicians in the team to carry out work as per the planning schedule
• Manual handling of samples
• General maintenance, cleaning and checking of equipment
• Working to all HSE standards
• Interaction with clients during witnessed testing
• Generating test reports for clients (data entry, quality assurance)
• Ensuring compliance to all Element Material Technology quality standards
• Driving to customer site to collect samples and / or conduct testing at their lab on a regular / daily basis
• Willing to assist in other activities from time to time that may be requested by the department manager to assist in the execution of Element Material Technology annual targets and budget

Requirement:

Have a diploma in chemistry with at least 2 years experience in similar role

Have the ability to work in teams under pressure and flexible to work Good English communication skills: reading, writing, speaking

Good maths skills

Knowledge and experience of safe operation of testing equipment and operating in an independent / chemistry / consultant laboratory

Transport and Lunch will be provided

• Assist and learn all aspects of work the environmental department carry out including stack emissions monitoring, ambient air quality monitoring, soil and groundwater monitoring and noise monitoring
• A willingness to embrace new skills in the above mentioned areas and apply them in a practical context is considered prerequisite
• Assist with planning and execution of projects 
• Assist with report preparation
• Assistance with maintenance and calibration of environmental department equipment
• Assistance with maintenance of Health and Safety and Quality standards within a UKAS accredited 17025 quality management systems.

Requirement:

• Minimum ITE qualification (NITEC/Higher NITEC) or Diploma in a relevant science or engineering discipline
• Holds a valid Class 3 / 3A Singapore Driving License
• Relevant laboratory experience will be an advantage and may be considered in lieu of formal education
• Must be physically fit to perform sampling activities
• Ability to work independently

Job Responsibilities

• Lead and manage daily cleaning operations across multiple sites, ensuring high standards and smooth workflows
• Work closely with supervisors and clients to maintain service quality and promptly resolve any issues
• Conduct regular site inspections and monthly audits to ensure cleanliness, safety, and compliance standards are met
• Manage inventory, equipment, and maintenance schedules to ensure operational readiness
• Support and engage cleaning crew through regular check-ins and team coordination
• Collaborate with account managers to address operational needs and handle ad hoc requests
• Handle and report operational incidents in a timely and professional manner

Requirements

• Experience in cleaning operations, facilities management, or related field
• Strong leadership and team management skills
• Good communication and problem-solving abilities
• Able to manage multiple sites in a fast-paced environment
• Responsible, detail-oriented, and customer-focused

Your role

Our major Oil & Gas Downstream Client is urgently looking for Instrument Engineer who will provide instrumentation and DCS/Systems execution support for projects and turnaround instrumentation scope. You will provide Planning, technical guidance and support complex troubleshooting during major turnarounds.

In addition, you will support technical training to contractors pertaining to Quality Control. You will provide execution and engineering support for Systems Migration Projects.

Responsibilities:

• Ensure that HSE considerations are consistently treated as high priority throughout engineering, construction, and turnover
• Act as a leader and role model to promote a robust health, safety, and environmental culture in the project community
• Maintain compliance with the project& TA safety assurance plan to ensure that work is accomplished in an environmentally sound manner using safe work practices, following company HSSE policies and procedures
• Participate in the project & TA construction Risk Assessment process prior to contractor mobilization and conduct Safety Observation and Conversations at the job sites to help achieve Goal Zero.  
• Provide support and inputs to contractor risk assessments and mitigation plans supporting the use of tools such as a Job Hazards Analysis and daily Task Hazard Assessments
• Coordinate and lead the Permit to Work (PTW) process
• Support contractor to identify, coordinate, and mitigate risks associated with Simultaneous Operations (SIMOPs)if any
• Respond to safety incidents following proper incident notification process, participate in investigations, and complete action items as required to prevent reoccurrence
• Comply, participate, and implement relevant project and project & TA management processes, engineering and quality practices and site OP/WIs
• Facilitate and document Constructability Reviews with Engineering and Operations to optimize construction and help prevent field rework
• Support Project Engineers in the through the ORS process in Assess, Select, Define and Execute engineering stages of projects, as required
• Provide inputs for cost estimation of project construction & TA with respect to scope accuracy and level of effort and monitor actual costs against the approved budget
• Provide input into the scheduling of projects & TA to meet project milestones and maintain construction resources to acceptable levels
• Review contractor work performance and drive a focus on quality of work and a strong safety culture
• Ensure contractors follow applicable project construction & TA procedures
• Ensure good co-operation between the project & TA organization, contractors, and Operations
• Coordinate with Operations and Project Engineer & TA Lead to ensure that proposed construction and work methods are clearly understood and accepted
• Review contractor Tie-In / Cutover Plans, etc. and monitor work in progress to ensure compliance with the approved plans endorsed by Technical Authority
• Coordinate between in house contractors, design engineers, vendors and the Project Engineer to resolve field discrepancies in design packages and address material delays and complex troubleshooting issues.
• Ensure equipment and manpower resources are being used efficiently
• Network with various departments to ensure all appropriate permits and regulations are followed.

You are what we are looking for if you:

• Have Diploma/Graduate Degree in Engineering discipline (Electrical/Instrument) or equivalent technical work experience in the electrical/instrumentation trade
• Have minimum 10 years of Project Execution/construction experience for Instrumentation & Systems in oil & gas downstream and chemical industry. Experience in Bukom and familiarity of brownfield assets is required
• Have strong Planning, Coordination and Stakeholder management skills in managing and executing projects with significant Instrumentation and Systems scope. The Instrumentation Execution Engineer is expected to lead the front in all matters of instrumentation execution including the developing of the execution plan
• Have strong understanding of field installation, construction, and commissioning of instrumentation. This includes quality control/full functional testing, complex troubleshooting of field equipment, FAT/SAT
• Have execution Experience in a major turnaround
• Have experience with DCS/IPS/SCADA/F&G systems is mandatory. Ability to understand and articulate complexities and risks during new instrumentation/logic tie ins to existing LIVE systems
• Have experience with Yokogawa CentumCS3000/VP and ProSafe, Honeywell FSC/SM System preferred
• Have demonstrated experience delivering projects in an operating plant or other brownfield environment with a focus on minimizing disruption of ongoing operations
• Have track record for HSE leadership and delivery
• Have knowledge and experience in project/activity scheduling and interpreting cost reports for cost control tracking and intervention
• Have experience with quality and engineering documentation requirements necessary for turnover of completed installations
• Have knowledge of industry standard HSE policies and procedures
• Have knowledge of industry standard Quality Assurance program requirements
• Have experience with Permit to Work (PTW)process
• Have experience with Request for Information process (RFI) for field clarifications and change management during construction
• Have experience with Safety Instrument Systems (SIS) Process and SIS testing requirements
• Have experience with base layer controls
• Have experience with front line troubleshooting of instrumentation, defect identification and root cause analysis(RCA) or causal learning
• Have experience with HART, Foundation Fieldbus and Modbus Protocol
• Have experience with Conventional and Quality Measurement Instruments commissioning, testing, and troubleshooting
• Have strong communication skills andability to breakdown technical details to non-technical stakeholders.