Total 4,921 systems engineer job vacancies in Engineering category

Location: No. 7 Tuas Avenue 16 Singapore 638934 (Company transport at designated pick up points - Jurong east, Bukit batok, Choa chu kang, Lakeside, Tuas crescent etc)

Working Days: 5 days A Week

Working hours : 8:00am - 5:00pm or 9:00am - 6:00pm (40 hrs per week)

Salary : $2,800 to $4,200 (Based on market rate, subject to individual’s qualification & experience)

Overview

• We are a public-listed company that specialises in the manufacturing of steel prefabricated reinforcement for the construction industry. We are seeking suitably qualified personnel to join our team.

Roles & Responsibilities:

• Extract bill of quantities for steel reinforcements from structural drawings to ensure accurate material planning
• Schedule and draft technical drawings using appropriate tools for submission and production purposes
• Coordinate technical issues with project site personnel to facilitate smooth project progress
• Attend site discussions as needed to resolve technical queries and support project teams

Requirements:

• Min Diploma in Structural/Civil Engineering or QS / Structural Engineering Design or related discipline to support technical understanding
• Working knowledge of AutoCad and Revit-BIM tools to enhance drawing accuracy and efficiency
• Minimum of 1 year of relevant work experience in a similar field to ensure familiarity with industry practices

Kelly Chong Reg No:R26161160

The Supreme HR Advisory Pte Ltd EA No: 14C7279

This role is a 2 years renewable contract, location is in the East

Technical & Design Interface Management

•            Act as the primary on-site conduit between internal Engineering Team overseas and local stakeholders, translating complex technical design requirements into actionable site implementation plans.

•            Collaborate to ensure structural modifications, cable containment, and spatial provisions seamlessly accommodate new and refurbished subsystems.

•            Facilitate interface matrix alignment across all major project scopes, including new vehicles, Power Supply Distribution (PSD), Platform Screen Doors (PDS), Signalling, Communications and Guideway Track Infrastructure.

Stakeholder Coordination & Alignment

•            Serve as the technical interface point-of-contact for appointed consultants, driving the timely review and approval of Interface Control Documents (ICDs).

•            Serve as PIC for work permits

•            Coordinate directly with third-party main contractors and designated subcontractors to eliminate spatial clashes, scheduling conflicts, and execution overlap at the site office.

•            Organize and chair regular on-site Interface Coordination Meetings to resolve cross-package technical conflicts, tracking open items through an updated Interface Register.

Site Installation & Asset Modernisation Support

•            Carefully plan interface schedules for refurbishments (such as PSD modifications and signaling upgrades) to ensure zero impact on the live, daily operations of the existing system.

•            Oversee the structural and electrical readiness of the site prior to the delivery, installation, and integration of new vehicles and expanded infrastructure.

•            Assist the T&C teams in defining interface testing boundaries, ensuring all interconnected systems operate cohesively during local integration testing.

Documentation, Quality & Risk Management

•            Maintain, track, and regularly update the project’s Master Interface Register, proactively escalating critical design or installation bottlenecks to the Site Project Manager.

•            Review, filter, and track site RFIs from subcontractors and contractors, ensuring technical queries requiring input are routed and resolved expeditiously.

•            Identify potential scope creep or design changes arising from site interface issues, documenting them to support project management team in variations and risk mitigation.

If you are interested in any of the positions, do kindly drop your most updated resume to wendykhoo@recruitexpress.com.sg

Wendy Khoo Hui Wen (R1761665)
Recruit Express Pte Ltd
EA License: 99C4599

• Well Established Company

• Basic $3800 - $4200 + AWS + Variable Bonus

• Excellent Welfare and Benefits + Career progression

• Working location: Tuas (Company Transport Provided)

• Working hours: Normal Working Hours

  
  

Job Responsibilities:

• To ensure all the maintenance work is carried out systematically, efficiently & safely.

• By improving existing preventive maintenance system thus reduce maintenance cost and improve performance of equipment.

• To create, update and maintain all SOPs and all ISO documents & MOM equipment registration.

• To be the initiator and coordinator of MOC for any addition, modification and replacement in the system.

• To assist the Department Manager and Supervisor to co-ordinate and supervise the day-to-day activities.

• To troubleshoot Mechanical Equipment / Systems’ problems when it runs abnormally malfunction.

• To work closely with the operations team for daily, weekly and monthly maintenance programmed to maintain all equipment running efficiently, safely and smoothly.

• To train all technicians and staff on equipment maintenance and monitor the 5S and TPM activities carried out in the section.

• To assist the Department Manager to propose and implement action plans to rectify faults occurring in the system/processes.

• To be involved in new project management from time to time and be responsible for document preparation and other paper works, as well as co-ordination with contractors & Vendors.

• To manage all Mechanical & electrical Instruments spare parts and tools.

• To monitor the implementation of all EHS matters within the section.

• To be responsible for document management.
  

Job Requirements:

• Minimum Bachelor's Degree in Mechanical Engineering, Chemical Engineering, and/or equivalent.

• At least 2 years of experience working in mechanical, preferably within large-scale industrial (palm oil mill, flour and sugar process manufacturing, steel industry, mining and clay industry or waste management facilities.

• Strong knowledge of mechanical systems design, installation, and maintenance, particularly in industrial settings.

• Proficient in CAD software, CMMS software, and other engineering design tools.
  

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities

• Current and Expected salary

• Reason for leaving

• Date of availability

• Education background

  
  

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Location: Novena
Salary: Up to $5,000/month
Contract: 3-Month Contract to Permanent Conversion

Job Scope:

• Manage facilities projects and addition & alteration works
• Coordinate contractors and vendors to ensure project completion within timeline
• Prepare reports, presentations, and budget justifications
• Track maintenance schedules and service contracts
• Support daily facilities operations and project activities

Requirements:

• Diploma or Degree in relevant discipline
• 4–5 years of experience in M&E or Building Services
• Knowledge in Mechanical & Electrical systems, Air Conditioning, and Blueprint Reading
• Experience in budgeting and project coordination preferred

All qualified applicants, please click “ APPLY NOW”

Or you may send in your resume to:

Whatsapp: https://wa.me/+6597430026  

Email : kimlow@recruitexpress.com.sg

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

• Well Established Security Inspection Solutions Company

• Salary: $2500 - $2800 (Basic) + $300 Transport Allowance

• Working Hour: Monday - Friday (8.30am – 5.30pm)

• Company Location: Jurong East (Based on Project Site)

• Variable bonus + Excellent Wellfare

• Training Provided

Job Scope:

• Assist Engineers in the maintenance, repair, and installation of equipment. Diagnose errors and technical issues and determine appropriate solutions.
• Support Engineers in project management, including planning, execution, and monitoring.
• Assist with the installation of new equipment and systems.
• Conduct routine troubleshooting of mechanical and electrical equipment to ensure smooth operations.
• Produce timely and detailed reports regarding maintenance activities, project status, and any issues or delays.
• Follow all company field processes and protocols to ensure safety and efficiency.
• Perform basic housekeeping duties to ensure a clean and safe work environment.
• Perform any other engineering-related tasks as assigned by senior engineers or management.

Requirement:

• NITEC / Diploma in Electrical / Mechanical Engineering or equivalent
• 0 - 2 years of relevant working experience in similar position

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

YEOW CHANG FU (R23118759)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $3200 - $4200 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8am to 5.30pm

Job Responsibilities:

• To develop, document and support the build of high precision plastic injection tooling and molded parts manufacturing
• Support Program team during upfront new project quotation stage by providing accurate upfront tooling/product DFM that matches the right quality requirements
• To meet customer for DFM and mold concept review to ensure customer’s technical requirements and concerns are translated and addressed
• Support Tooling Department by conducting internal tooling design and DFM reviews before tool launch
• Support Production in areas like molding process optimization, implement manufacturing fixtures and automation for reliability and efficiency improvements
• Support Quality Team in the design and fabrication of test/measurement fixtures
• To coordinate mold trials, tooling and molded part troubleshooting and carry out necessary engineering changes to ensure parts can be produced smoothly with the required quality
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum Nitec / Diploma level or relevant qualification
• With past working experience or knowledge of Precision Tooling Design/Fabrication, Micro Plastic Injection Molding Process or Manufacturing Process Engineering related field preferred
• Required 3D CAD software skill for Siemens UG NX or PTC Creo 4.0 and above

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Electronic Hardware Design Engineer.

Duties and Responsibilities

· Develop electronic hardware from the ground up, while working closely with system designer.

· Create schematic and a thorough QC process

· Hardware safety/reliability analysis and quality assurance.

· Able to work with PCB designer, PCBA assembly plants for prototype fabrication and BOM management.

· Write tests for both existing and new electronic hardware compatibility and stability

Hardware design Engineer Requirements and Qualifications

· Bachelor’s degree in electronic engineering, information technology, computer science, or a related field

· Experience in schematic development for embedded system, analog / RF / Digital / FPGA.

· Experience of Altium designer or other schematic / PCB design tool.

· Experience on TI, Xilinx electronic components and selection / assessment tools.

· In-depth understanding of network communication.

· Working knowledge of TI ARM / Xilinx SoC IDE.

Job Title - MRO Engineers

Location - Ang Mo Kio

Type - 1 year contract, renewable

Description -

Will be a part of the Maintenance, Repairs, Overhauls (MRO) – Engineering team to ensure the smooth functioning of our engineering, quality and reliability processes supporting Ground Support Equipment (GSE) maintenance operations at the customer’s premises. Will play a key role in maintaining operational reliability, troubleshooting issues, engaging the customer in technical/engineering issues, and implementing process improvements to enhance efficiency and performance.

Troubleshoot, analyze, and resolve technical issues utilizing practical fault tree analysis methodologies to minimize GSE downtime.

Conduct failure mode analysis and recommend enhance maintenance scheme to improve GSE reliability.

Communicate with the customers on troubleshooting, failure mode and corrective/preventive actions on technical defects.

Prepare technical report and presentation deck for submission and presenting to the customer when required.

Develop, review, and update technical documentation including maintenance manuals, repair procedures, and engineering change requests.

Perform spare parts obsolescence management which include identifying obsolete spare parts and mitigating risk through monitoring, alternative parts identification and build safety stocks.

Collaborate closely with operations, quality assurance, and supply chain teams to optimize maintenance schedule planning.

Respond to urgent technical issues, emergencies during off-office hours and weekends when necessary.

Ensure compliance with safety, security, and regulatory standards.

What we are looking for:
• Bachelor in Electrical/Computer/Computer Science Engineering.
• Minimal 5 years of experience in embedded firmware/software product development. Prior experience in industrial automation will be an advantage.
• Proficiency in C programming for embedded systems; C++ experience is required.
• Practical experience with STM32 or similar 32-bit MCU architectures, including low-level driver development.
• Experience with development in the following areas for embedded system:
o Development with RTOS, such as VxWorks, Quadros, ThreadX or others.
o Development of communication protocols like TCP/IP, Ethernet/USB/WIFI and CAN/Profibus.
• Good analysis skills and proven ability to solve complex problems. Experience in using different hardware-assisted debugging tools (eg: oscilloscope, logic analyzer etc.)
• Good communication and interpersonal skills and be able to work independently and as team in multi-cultural environment
• Open-minded, a willingness to experiment within acceptable boundaries and a creative mind to bring novel solutions into design and problem-solving

The Preferred - You Might Also Have:
• Have experience implementing firmware in digital and analogue hardware-oriented design based on chip/component specification, hardware design and schematics.
• Experience documenting firmware/embedded software design, hardware/firmware interface. Have knowledge in different established design techniques and design patterns.
• Have experience leading process improvements to improve organization capabilities with results based on embedded software development modern practices and tools.
• We prefer knowledge of industrial automation, control systems, or PLCs.

Responsibilities:

• Perform daily SAP operations.
• Formulate reasonable production plans based on market sales forecasts to meet customer demand with the most economical inventory.
• Optimize production plans, regularly analyze plan execution status, and drive improvements in plan execution rate to ensure delivery performance.
• Improve production efficiency (OEE).
• Manage and plan the procurement of operation-related production materials.
• Handle logistics for wafers, production-related materials, parts, and finished goods.
• Develop production material plans to ensure the timely completion of production tasks and the rationality of material inventory levels.
• Any other ad-hoc tasks as assigned. 

Requirements:

• Minimum Bachelor in a Science or Engineering field.
• Experience in logistics planning / supply chain management (experience in 6/8-inch FAB or similar environment is preferred).
• Strong communication skills to communicate effectively with stakeholders
• Proficient in Windows operating systems and Office software.
• Skilled in using material management systems such as SAP & ERP.
• Proficient in SQL and Python.
• Fresh graduates are welcome to apply

We’re Hiring: AI Engineer (Agentic AI & RAG Solutions)

Join a forward-thinking team building next-generation AI solutions in the procurement domain. This role offers the opportunity to work on cutting-edge Agentic AI systems, leveraging large language models (LLMs), Retrieval-Augmented Generation (RAG), and cloud-native technologies to deliver impactful, scalable AI applications.

Job Highlights

Work Location: Depot Road (109679)
Working Arrangement: 5 Days Work From Office (Office Hours)
Employment Type: 2-Year Contract
Salary: Up to SGD 7,000 + AWS + Performance Bonus + Loyalty Bonus
Technical Assessment: Required

Civil and RC Structural Works Site Supervisor / engineer cum QS:

Job Description

We are looking for an individual with great Civil/RC Structural experience for the position of Site Supervisor cum QS for our daily onsite operations. The candidate will work directly under the construction and project manager, managing clients, workers and all other stakeholders throughout the construction phase of various RC structural works.

Reporting to the Construction and Project Managers, the candidate will be responsible for constructing, managing and coordinating site-related works with the client, RE/RTO, and the workers to perform the RC work in the strictest compliance with the drawing, specification and contract documents. This role is focused on working in the field, managing our own workers, read and understand drawings, plan works, progress, materials and machinery, and will report directly to the Construction and project Manager. This candidate should understand all aspects of RC structural construction in relation to executing work on-site.

It is expected that the candidate will be detail-oriented and can manage and communicate with workers very well. There will be a significant amount of “hands-on” works, reading and understanding the RC structural drawings, guiding the workers on construction, coordinating with contractors in the field while installing all aspects of the project RC structural works. The candidate must have robust EQ skills and be able to relate to and communicate with the client, the workers, the managers, the RE/RTO, and subcontractors etc. of all tiers and vendors and immediately establish trust and confidence in his/her ability.

Responsibilities:

• Represent the Company in the utmost professional manner while constantly embracing honesty, integrity, and truth
• Directly guiding and managing workers in executing the construction works
• Reading, understanding the RC structural drawings very well, be able to produce bar bending schedule (BBS), plan and arrange manpower and various materials, be able to levelling and setting out the works
• Comply with the various requirements of the company
• Develop a comprehensive understanding of the contract documents (drawings and specifications), phasing plans, structural systems interrelationships, construction sequencing, and project schedule
• Attend daily job site safety meetings and perform weekly project safety audits
• Work with the project safety team to ensure all works are being carried out to the highest levels of safety
• Coordinate with on-site Resident Technical Officers (RTOs) and Resident Engineers( REs) for all required inspections and work verification
• Develop look-ahead schedules and assist the Construction managers in long range planning
• Facilitate problem solving, as may arise, between structural, architectural, mechanical, electrical and various contractors during construction
• Work closely with the project and construction Managers to lead logistics of all works and materials
• Working knowledge of structural systems and how precast, in-situ and structural steel are sequenced in a building and construction project
• Log and post all civil and structural changes and as-built information on field drawings.
• Ensure all information is current and communicated with the project team
• Liaise with the client, supervisory engineers, inspectors and relevant staff
• Knowledge and ability to use AutoCAD to produce construction/ shop drawings when necessary
• Ensure that all work done are adhere to relevant quality documentation/records

Qualifications

• Must possess BCSS certificate
• Independently produce method statement and risk assessment etc. documents
• Civil/Structural construction engineer / supervisor or foreman background with basic quantity surveying knowledge. Good at RC structural works, rebar schedudling, formworks fabrication and installation
• 5+ years of Civil/RC Structural site supervisor experiences with hands on ability to teach workers
• Experience in building temporary civil, drainage, earthworks, RC structural works, site office, laydown area etc.
• Structural or civil and engineering working knowledge of plans, engineering drawings, BBS, specifications and schematics associated with the reinforced concrete structural trades for permanent works or temporary onsite facilities
• Computer literacy. Significant experience with Excel, Word, AutoCAD, and other computer based tools
• Strong leadership and excellent communication and organizational skills in managing workers and various stakeholders

Grow. Listen. Check your ego at the door. Be humble. Build lasting impressions.

We regret that only shortlisted candidates will be notified. Thank you for applying.

Working Hours

Monday – Friday
8:00am – 5:30pm

Job Summary

Support operational and engineering activities in a manufacturing environment, including equipment maintenance, process improvement, and technical project support to enhance productivity and operational efficiency.

Key Responsibilities

• Support operational and technical engineering activities
• Perform maintenance and calibration of machines and equipment
• Assist in developing SOPs and maintenance procedures
• Identify opportunities for process improvement and automation
• Support engineering projects related to productivity and cost optimisation
• Ensure compliance with workplace safety standards
• Support ad-hoc operational and engineering tasks as assigned

Requirements

• Degree in Mechanical Engineering, Electrical Engineering, or related discipline

All qualified applicants, please click “ APPLY NOW”

Or you may send in your resume to:

Whatsapp: https://wa.me/+6597430026  

Email : kimlow@recruitexpress.com.sg

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

5 days, 8.30am-6.15pm

Salary: $3500- $6000

Location: Ubi 

Company background:

Specializes in Semiconductor Backend Tooling including Die Attach Tools, Wire Bond Tools & Bond Test Tools

Job Responsibilities:

• Design and development of Semiconductor Tools and mechanical systems.
• Planning, Scheduling and Costing of Tools and Mechanical Modules
• Responsible for 3D & 2D drawings, tolerance analysis, BOM preparation.
• Working closely with Electrical, Vision and Software Engineers.
• Willing to work extended hours in critical phases of project execution.

Job Requirements:

• Diploma or Degree in Mechanical Engineering or related Technical disciplines.
• Minimum 3 years of design experiences in semiconductor tooling
• Experience with Design and Development of High-Speed Pick and Place Systems, Flip Chip Bonders, Die Attach Machines, and Lamination Machine is a definite plus
• Proficiency with CAD Software is a must.
• Experience with vision application, thermal modelling, calculation and measurement techniques would be an advantage.

Kelly Chong Reg No:R26161160

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Our client is a well-established A1 main contractor known for its strong track record in delivering high-profile mixed-use, commercial, residential, and large-scale building projects across Singapore. With a robust pipeline of upcoming developments, including iconic projects, they are actively seeking to hire multiple Project Engineers/Senior Project/Site Engineers at an exciting phase of their growth.

There are opportunities for both building and infrastructure projects islandwide.

What you will do

• Support the Project Manager in planning, coordinating, and executing on-site project activities.
• Attend site meetings, inspections, and monitoring sessions, providing updates on work progress.
• Work closely with architects, consultants, and stakeholders to ensure adherence to technical drawings and specifications.
• Oversee daily construction operations and ensure compliance with health, safety, and regulatory requirements.
• Coordinate site logistics, including material deliveries and equipment allocation, to maintain efficient workflow.
• Assist in tracking project budgets and monitoring cost-related matters.
• Help resolve site issues or delays by proposing practical corrective actions.
• Supervise subcontractors to ensure productivity, workmanship quality, and compliance with project requirements.

What you will need

• Degree/diploma in Civil Engineering, Construction Management, or related field
• Minimum 3 years of relevant experience as site/project engineer
• Candidate with more experience can be considered for the Senior position

Location: South

Interested candidates kindly forward your CV to yiling.tan@peoplesearch.jobs (Tan Yi Ling, Reg No: R21103172). You may share this opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057