Job Description:

• To co-ordinate and correspond with sub-contractors, suppliers and consultants
• Attending site meetings
• Planning, scheduling and monitoring work progress
• Supervision of construction progress and quality checking
• Prepare monthly progresss report and progress claim
• Supervise all structural and civil works and attend all meetings and co-ordination with sub-contractors.
• Liaise with client’s consultants, RE and etc.
• Prepare and plan work schedules.
• Maintain and monitor quality controls.
• Conduct daily field inspections of all work under construction.
• Ensure workers maintain a clean construction site at all times.
• Prepare job closing inspection reports for completed construction.
• Establish inventory control methods and procedures to ensure availability.
• Co-ordinate all matters pertaining to compensation insurance for labour and take necessary steps to maintain lowest possible rate
• Other administrative duties and ad-hoc assignments as required.

Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.
• At least 3 Year(s) of working experience in the related field is required for this position.

Addcel has been delivering deep value to clients across the Oil and Gas, Petrochemical, Energy, Pharmaceutical, Data Centers, Environmental Solutions and Infrastructure industries since 2010.

Specialising in Design & Building of process utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation such as structural steel, piping, storage tanks & silos as well as the equipment installation, we take pride and passion in all that we do.

Site Engineer reports to Site Manager and is responsible for the below:

• Support the creation of detailed construction plan, contributing to the sequencing and methodology discussion.
• Drive site work ensuring productivity, safety and quality goals are achieved.
• Prepare construction equipment loading chart and assist in its updates as necessary.
• Understand Project Safety Requirements, together with HSE Coordinator/Officer and inputs from SM to prepare RA after taking due consideration for safety, constructability & productivity
• Prepare, update and revise Detailed MTO (Material Take-Off) based on actual site measurements of latest IFC drawings.
• Evaluate and plan the scaffolding needs for new as well as modification based on evolving site needs
• Prepare Level 5 micro-schedule to enable 02 Wk 4M look-ahead
• Prepare and update Regular Site reports and Project Forecast.
• Attend daily toolbox meeting and support Pre-task talk by Supervisor to disseminate work plan for the day
• Coordinate work sequence with other trade partners engineers especially those predecent, concurrent and subsequent trade partners to minimise clashes and ensure continuous workfront
• Coordinate with Procurement for material delivery schedule based on 4M micro schedule
• Drive the closure of punch lists and the completion of necessary documentation, ensuring that items are resolved in a timely manner.
• Support Supervisor to conduct pneumatic testing and trace leaks and conduct leak repairs, hydrotest followed by flushing and passivation
• Oversee the completion of reinstatement works and ensure that any remaining punch list items are cleared, leading to project closure.

To be a good fit, you would possess these qualities and skills

• Min. 3 - 5 years of relevant working experience, preferably site work in Semi-con, Pharma & Oil & Gas.
• Proficient knowledge in AutoCAD software & Microsoft Office.
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Join us in adding value everyway and creating value everyday with pride and with passion!

Responsibilities

• Coordinate with clients to supervise the work to ensure that the quality and schedule of the work are adhered to base on laws and regulations.
• Ability to understand the design objectives, systems and budgets of projects.
• Coordinate with supplier / sub-contractor of the tender specification and obtain the quotation from them.
• Check and ensure the equipment and material offered in compliance with the specification and drawings.
• Prepare weekly work schedules, and documents.
• Ensure proper execution of the temporary works as planned.
• Control and supervise workmen and subcontractors to make sure standards of building performance, quality, time and cost schedules, and safety are complied with.
• Oversee and be overall responsible for works carried out by junior supervisors assigned under his/her care.
• Responsible for keeping daily work record, including additional work claims to the clients and from the subcontractors.
• Prepare progress reports to consultants and owners.
• Any ad-hoc project to be assigned.

Requirements

• Possess at least a Degree / Diploma in Mechanical Engineering or equivalent.
• Must have minimum 3-5 years of M&E working experience in ACMV/ HVAC, Service and Maintenance of Air-Con
• Strong knowledge of M&E details, working drawings and local construction practices
• Conversant with local codes and regulations
• Is a good team player and is analytical and a problem solver.
• Timely submission
• Strong interpersonal skills, ability to develop relationships and communicate with all levels of management
• Proficient Microsoft Office and other IT software

Staff Benefits

1. AWS
2. Annual leave 17 days, up to a maximum of 21 days
3. Transportation reimbursement claims (2 ways from home to office/site)
4. VB – subjective
5. Medical/Dental benefits
6. Insurance – Hospital & Surgery, Personal Accident and Term Life
7. Annual heath screening up to $200
8. Mobile Claims up to $100

Working hour: 8.30am to 5.30pm (5 days’ work week)

A site engineer acts as the primary technical and supervisory manager on a construction site. They bridge the gap between design and physical construction, overseeing daily operations, interpreting blueprints, managing subcontractors, and ensuring the project is completed safely, on schedule, and within budget.

Key Responsibilities:

1. Project Planning and Design Review

Analyze architectural and engineering drawings, specifications, and project plans to understand scope, materials, and construction methods.

Collaborate with architects and design engineers to ensure practical feasibility of the design and provide input for improvements.

Assist in preparing construction schedules and timelines using project management software such as Primavera or MS Project.

2. Site Supervision and Execution

Supervise on-site construction activities to ensure compliance with engineering standards, building codes, and safety regulations.

Monitor and inspect work to ensure quality control and adherence to design specifications.

Provide technical guidance to contractors and laborers during different phases of construction.

Resolve technical issues or design challenges that arise during execution.

3. Budgeting and Cost Management

Estimate quantities and cost of materials, labor, and equipment needed for construction.

Monitor and control project budgets; help prepare billing reports and cost forecasts.

Evaluate bids from subcontractors and vendors and recommend contracts for approval.

4. Health, Safety, and Environmental Compliance

Ensure all construction activities adhere to occupational safety and health standards.

Conduct safety meetings, toolbox talks, and site inspections.

Identify potential hazards and implement corrective measures.

Promote a safety-first culture on the construction site.

5. Communication and Coordination

Serve as a liaison between the office-based design team and the on-site construction team.

Coordinate with multiple disciplines, including mechanical, electrical, and plumbing (MEP) engineers, to avoid conflicts and delays.

Conduct regular meetings with clients, contractors, consultants, and project stakeholders to update progress and resolve issues.

6. Documentation and Reporting

Maintain detailed documentation of construction activities, progress reports, change orders, and as-built drawings.

Prepare daily, weekly, and monthly project reports for review by senior management or clients.

Document and track project variations and delays for claims and contractual matters.

Required Skills and Qualifications:

Educational Background:

Bachelor’s Degree in Civil Engineering, Construction Engineering, or Structural Engineering.

Master’s Degree (optional but preferred for senior roles).

Professional certifications like PMP (Project Management Professional) or LEED (Leadership in Energy and Environmental Design) are added advantages.

Technical Skills:

Strong understanding of engineering principles, construction techniques, and materials.

Proficiency in software such as AutoCAD, Revit, STAAD Pro, ETABS, Primavera, MS Project, and MS Office.

Knowledge of BIM (Building Information Modeling) and project lifecycle management tools.

Ability to interpret complex technical drawings and blueprints.

Soft Skills:

Strong leadership and team management abilities.

Excellent communication and interpersonal skills.

Problem-solving mindset with attention to detail.

Time management and the ability to work under pressure and tight deadlines.

Negotiation skills when dealing with contractors, suppliers, and clients.

Typical Work Environment:

Split between office settings and outdoor construction sites.

Regular travel to project sites may be required.

Exposure to varying weather conditions, dust, noise, and other site-related challenges.

Use of personal protective equipment (PPE) is mandatory on-site.

Career Progression:

A Construction Engineer can move up the career ladder by gaining experience, certifications, and skills. Possible career paths include:

Site Engineer

Senior Engineer

Project Engineer

Construction Manager

Project Manager

Engineering Director

Consultant or Contractor (Independent)

Challenges in the Role:

Managing multiple stakeholders with differing interests.

Dealing with unexpected site conditions and design changes.

Keeping the project on track despite delays in material supply, labor shortages, or regulatory approvals.

Ensuring safety compliance while meeting deadlines and budget constraints.

Importance of the Role:

Construction Engineers play a vital role in shaping the infrastructure that supports modern life. From residential buildings and commercial complexes to highways, tunnels, and dams, they contribute to the development and sustainability of communities. Their expertise ensures that structures are safe, efficient, and environmentally responsible.

Responsibilities:

• Acts as the main technical advisor on construction sites, supervising staff, tools, and materials to ensure projects are completed safely, on time, and within budget.
• Interpret technical designs, set out site layouts, provide technical advice, and enforce safety regulations.
• Setting out, leveling, and surveying the site to establish building locations, grades, and elevations, ensuring all structural work follows design plans.
• Overseeing daily construction activities, managing subcontractors, and coordinating materials and labor to meet project goals.
• Providing technical solutions to site issues and conducting quality assurance inspections to ensure compliance with standards and regulations.
• Enforcing safety protocols, conducting safety audits, and ensuring compliance with Occupational Health and Safety (OHS) regulations.
• Maintaining accurate project documentation, such as site diaries, daily progress reports, and change orders.

Requirements:

• Min Degree in Civil Engineering or related field
• Min 3 years of relevant experience in geotechnical works and site supervision
• Experience in pipe jacking, tunnelling, or mining works preferred
• Knowledge of safety regulations and geotechnical construction standards

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Location: Kaki Bukit
Salary: $4,000 – $5,000
Working Hours: Monday to Friday, 8:00 AM – 5:30 PM
Industry: Semiconductor

Key Responsibilities:

• Design and develop precision tooling, jigs, fixtures, and mechanical components
• Prepare detailed 2D and 3D drawings using AutoCAD and SolidWorks
• Work closely with production and engineering teams to ensure design feasibility and manufacturability
• Modify and improve existing designs based on project requirements
• Ensure all designs meet technical specifications and industry standards
• Support prototyping, testing, and troubleshooting activities

Requirements:

• Diploma or Degree in Mechanical Engineering or related field
• Proven experience in precision engineering and/or semiconductor industry
• Proficient in AutoCAD/ SolidWorks
• Strong understanding of tooling design and mechanical components

To apply, please click on “Apply Now” or email your latest resume to dorothy@recruitlync.com / WhatsApp 85017683.

Ooi Shi Hui Dorothy (R1762852)
Recruit Lync Pte Ltd (22C1000)

Key Responsibilities:

• Responsible for the architecture design, RTL encoding (Verilog/SystemVerilog), and functional verification of digital control logic in 3D-NAND memory;
• Design a state machine (FSM) to manage complex NAND operation processes (such as Program, Read, Erase, Copy-back, Suspend/Resume, etc.);
• Develop a command decoder and address/parameter parsing logic to ensure compliance with JEDEC and internal specifications;
• Implement high-precision timing control logic to accurately generate the internal timing signals required for various operations (such as tR, tPROG, tBERS, etc.);
• Deeply involved in the physical layer and link layer logic implementation of ONFI (Open NAND Flash Interface) or Toggle Mode interface protocols, supporting DDR, NV-DDR, NV-LPDDR, and other modes;
• Collaborate with the analog/mixed-signal team to define array access timing, voltage switching windows, and read/write path control interfaces;
• Collaborate with firmware (FW) and system architecture teams to develop register maps, interrupt mechanisms, error handling strategies, and debug interfaces;
• Support UVM verification environment setup, provide Design for Testability (DFT) support, and participate in FPGA prototyping;
• Participate in chip bring-up, post-silicon debugging, and performance optimization to ensure products meet specification requirements.

Required Qualifications:

1. Education: Master's degree or above
2. Major: Microelectronics and Integrated Circuits, Electrical Engineering, Computer Engineering, or related fields;
3. Other Requirements:

• Minimum 5 years digital IC design experience, experience in NAND Flash or SSD controller projects is a plus;
• In-depth understanding of ONFI 4.x or Toggle 2.0/3.0 protocol specifications, with practical interface IP development or integration experience;
• Experience in control logic design under 3D-NAND or TLC/QLC architectures is a plus;
• Familiar with ECC control interfaces (such as LDPC/BCH engine scheduling and interaction);
• Excellent cross-functional collaboration skills, able to communicate efficiently with simulation, firmware, verification, testing, and product teams to jointly develop technical solutions.
• Experience with successfully tape-out and mass-produced memory chip projects is a plus.

About STMicroelectronics

At ST, we are 48,000 creators and makers of semiconductor technologies mastering the semiconductor supply chain with state-of-the-art manufacturing facilities. An integrated device manufacturer, we work with more than 200,000 customers and thousands of partners to design and build products,solutions, and ecosystems that address their challenges and opportunities, and the need to support a more sustainable world. Our technologies enable smarter mobility, more efficient power and energy management, and the wide-scale deployment of cloud-connected autonomous things. We are on track to be carbon neutral in all direct and indirect emissions (scopes 1 and 2), product transportation, business travel, and employee commuting emissions (our scope 3focus), and to achieve our 100% renewable electricity sourcing goal by the end of 2027.

Further information can be found at www.st.com

Key Responsibilities

1. Equipment Ownership & Performance

• Act as equipment owner for a defined set of CMP tools 
• Monitor OEE and uptime, define and drive actions to improve them.
• Analyze equipment alarms, and chronic issues; implement robust corrective and preventive actions.

2. Maintenance & Troubleshooting

• Define and optimize PM (Preventive Maintenance) plans and spare parts strategy.
• Support technicians in complex troubleshooting: mechanical, electrical, pneumatic, vacuum, robotics and software.
• Escalate and coordinate with equipment vendors (remote and on-site) for advanced technical support.

3. New Equipment Introduction & Upgrades

• Participate in specification, selection, installation and qualification of new CMP tools.
• Lead or support process and equipment release to production, including capability and stability checks.
• Manage equipment upgrades, retrofits, and obsolescence mitigation projects.

4. Process & Quality Support

• Work with process engineers to ensure that equipment performance meets process requirements 
• Support yield, quality, and reliability investigations from an equipment perspective
• Ensure equipment operation complies with quality systems (e.g. IATF 16949, ISO 9001, automotive standards where applicable).

5. Continuous Improvement & Industrial Efficiency

• Analyze data and KPIs; identify bottlenecks and chronic losses.
• Lead or participate in Lean/Six sigma/SMED activities for cycle time, cost, energy, and throughput improvements.
• Drive standardization of settings, PM procedures, troubleshooting guides, and documentation.

6. Safety, Environment & Compliance

• Ensure strict adherence to EHS rules (chemicals, slurry, gases, high voltage, vacuum, cleanroom, LOTO).
• Participate in risk assessments, FMEA, and implementation of safety interlocks and procedures.
• Maintain compliance with environmental and regulatory requirements (e.g. waste handling, emissions).

7. Documentation, Training & Knowledge Management

• Create and maintain equipment documentation: procedures, checklists, work instructions, recovery plans.
• Train and coach maintenance technicians on equipment usage and basic troubleshooting.
• Contribute to knowledge base and share best practices across shifts and sites.

Job Requirements:

• A Bachelor’s Degree in Mechanical, Mechatronics, Electrical & Electronics Engineering, Materials Science Engineering, Chemical Engineering or equivalent.
• Min 5 years of relevant work experience in CMP area, familiar with CMP Equipment (AMAT MirraMesa, Ebara F-REX200, Ontrak, etc.).
• Strong troubleshooting skills and deep technical knowledge.
• Knowledge of SPC, FMEA, 8D methodologies.
• Excellent communication, cross-functional collaboration abilities and written skills.
• Positive learning attitude with strong sense of responsibility.
• Strong ownership, a commitment and flexibility to support operational priorities
• Able to adapt in a fast paced environment and work under pressure.

Job Description

• Industry/ Organization Type: Construction/ Ground Engineering
• Position Title: Reinforced Concrete (RC) Engineer
• Working Location: Novena
• Working Hours: 5.5 Days, 44 hours per week
• Salary Package: Basic Salary + OT + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Oversee and coordinate all reinforced concrete (RC) works for tunnelling, including base slabs, tunnel walls, linings, and shafts.
• Plan and manage concrete casting activities, ensuring proper sequencing and efficient use of resources.
• Prepare and follow up on Requests for Inspection (RFI) and coordinate inspections with consultants and relevant authorities.
• Conduct and support site inspections for reinforcement, formwork, and concrete works.
• Monitor site progress and update progress reports to ensure alignment with the master schedule.
• Ensure all RC works meet design specifications and quality management requirements.
• Work closely with site supervisors, subcontractors, and QA/QC teams to resolve site issues promptly.
• Coordinate with planning and procurement teams to ensure timely delivery of materials and equipment.
• Maintain accurate records of inspections, casting activities, and technical submissions.

APPLY NOW!!!

• Bachelor’s Degree in Civil or Structural Engineering, or an equivalent qualification.
• 2–5 years of relevant experience in reinforced concrete works.
• Good knowledge of concrete works, formwork systems, reinforcement detailing, and casting sequences.
• Able to read and understand structural drawings and technical specifications.
• Familiar with site documentation such as RFIs, inspection checklists, method statements, and progress reports.
• Able to work independently and perform effectively in a fast-paced site environment.
• Strong communication and coordination skills when working with project teams and consultants.
• Experience in infrastructure projects will be an advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #83937 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

• Well Established Industrial Automation Company (MNC)

• $5000 + $6300 + Variable Bonus

• Company located at Woodlands

• Monday – Friday: 8:30am – 5:30pm

• Excellent Welfare & Benefits

Job Scope

• Collaboration with Project Manager and customer to understand design requirements and
• specifications for the product.
• Analyse project requirements and participate in concept generation.
• Design high precision and high-tech automation equipment.
• Selection of standard components such as sensor, pneumatic, motor, servo axis and robotics.
• BOM preparation using SAP.
• Coordinate with fabrication house and component suppliers.
• Report project progress to Project Manager and superior.
• Guide assembly technicians to build and test the equipment.
• Collaborate with cross-functional teams (including design, manufacturing, and quality assurance)to ensure compliance with industry standards and regulatory requirements.

Requirement

• Degree in Mechanical Engineering / Mechatronics or related disciplines
• 5 - 8 years of relevant experiences in automation equipment design
• Proficient in SolidWorks 3D and EPDM software

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOOSOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

ACMV Engineer (Air Conditioning and Mechanical Ventilation Engineer)

Working Days: Monday – Friday
Working Hours: 9am – 5.30pm
Salary: $ 3,800 - $ 5,000
Working Location: Eunos

Industry: Interior Design & Construction Company

Job Responsibilities:

• Design and planning of ACMV and MV systems
• Preparing and submitting tenders (Tender Costing)
• Conducting site surveys and managing the construction site (Site Management)
• Familiar with and arranging ACMV related services
• Assisting in the procurement of engineering equipment and materials (Procurement)
• Supervising on-site installation work to ensure compliance with drawings and specifications
• Assisting in testing and commissioning (T & C) Commissioning) Assisting with system troubleshooting and problem solving
   

Requirements:

• Diploma in Engineering-related experience (Mechanical, Electrical or construction services preferred)
• 2+ years of relevant work experience
• Familiarity with local regulations and standards preferred 

Chin See Min Reg No. : R22107450

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Responsibilities

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Requirements

• Degree in Electrical/Mechanical Engineering
• No experience needed, training provided

Interested candidates, please forward your resume to jalenetan@recruitexpress.com.sg

Consultant: Jalene Tan (R26160390)
Recruit Express Pte Ltd (99C4599)

Field Application Engineer

Salary: $3,800 - $4,600 + Performance Bonus + Claims
Working Hours: Monday - Friday, 8:30am - 5:30pm
Location: Tai Seng

Key Responsibilities

• Drive design-in activities and promote semiconductor solutions to customers.
• Identify and develop new demand-creation opportunities within assigned accounts.
• Collaborate closely with global suppliers and principals on technical promotion initiatives.
• Provide hands-on technical support, troubleshooting, and application guidance to customers.
• Assist customers in the design and implementation of MCU, Analog, and Power solutions.
• Conduct product presentations, technical workshops, and training sessions.
• Support customers throughout the product development lifecycle, from concept to production.
• Build strong technical relationships with customers and key stakeholders.

Requirements

• Diploma or Degree in Electronics & Electrical Engineering.
• 1–2 years of relevant experience within the electronics or semiconductor industry.
• Knowledge or hands-on experience in: Microcontrollers (MCU) and Analog circuits
• Well versed in Power management solutions

Key Responsibilities:

• Lead the architecture design (e.g. memory cells, select transistors, and peripheral devices), process integration, electrical characterization, modeling and simulation, failure analysis for 3D NAND devices.
• Design and execute DoE, analyze the impact of process variations on device performance and reliability (such as durability and data retention), and propose improvement solutions.
• Collaborate with the process development team to assess new device architectures, driving technology iteration.
• Write detailed technical reports and support customers or internal teams in resolving related technical issues.

Required Qualifications:

1. Education: Master's degree or above
2. Major: Microelectronics, physics, material science & engineering, chemistry;
3. Other Requirements:

• 8+ years of semiconductor device work experience, 3+ years of 3D NAND work experience.
• In-depth knowledge of 3D NAND device physics, familiar with its principles, failure modes, and reliability mechanisms.
• Troubleshooting, and problem-solving capabilities, with experience in successfully improving device performance or yield.
• Familiar with advanced semiconductor manufacturing processes and integration flows.
• Strong cross-team communication and collaboration skills.