Key Responsibilities:

• Responsible for the architecture design, RTL encoding (Verilog/SystemVerilog), and functional verification of digital control logic in 3D-NAND memory;
• Design a state machine (FSM) to manage complex NAND operation processes (such as Program, Read, Erase, Copy-back, Suspend/Resume, etc.);
• Develop a command decoder and address/parameter parsing logic to ensure compliance with JEDEC and internal specifications;
• Implement high-precision timing control logic to accurately generate the internal timing signals required for various operations (such as tR, tPROG, tBERS, etc.);
• Deeply involved in the physical layer and link layer logic implementation of ONFI (Open NAND Flash Interface) or Toggle Mode interface protocols, supporting DDR, NV-DDR, NV-LPDDR, and other modes;
• Collaborate with the analog/mixed-signal team to define array access timing, voltage switching windows, and read/write path control interfaces;
• Collaborate with firmware (FW) and system architecture teams to develop register maps, interrupt mechanisms, error handling strategies, and debug interfaces;
• Support UVM verification environment setup, provide Design for Testability (DFT) support, and participate in FPGA prototyping;
• Participate in chip bring-up, post-silicon debugging, and performance optimization to ensure products meet specification requirements.

Required Qualifications:

1. Education: Master's degree or above
2. Major: Microelectronics and Integrated Circuits, Electrical Engineering, Computer Engineering, or related fields;
3. Other Requirements:

• Minimum 5 years digital IC design experience, experience in NAND Flash or SSD controller projects is a plus;
• In-depth understanding of ONFI 4.x or Toggle 2.0/3.0 protocol specifications, with practical interface IP development or integration experience;
• Experience in control logic design under 3D-NAND or TLC/QLC architectures is a plus;
• Familiar with ECC control interfaces (such as LDPC/BCH engine scheduling and interaction);
• Excellent cross-functional collaboration skills, able to communicate efficiently with simulation, firmware, verification, testing, and product teams to jointly develop technical solutions.
• Experience with successfully tape-out and mass-produced memory chip projects is a plus.

The selected candidatewill be responsible for overseeing the end-to-end delivery of 66/230/400KVprotection and control system projects, ensuring design accuracy, regulatorycompliance, and timely execution.

Responsibilities

· Test and commissionprotection and control systems after modifications to ensure operationalreadiness

· Coordinate andcommunicate effectively with contractors, suppliers, business partners, and endcustomers to achieve on-time project delivery

· Collaborate with endcustomers to verify design accuracy and align project milestones with timelines

· Manage and maintain allproject documentation in compliance with client specifications for traceabilityand quality assurance

· Ensure adherence toregulatory requirements and occupational health and safety standards throughoutproject execution

Required competenciesand certifications

· Diploma or Degree inElectrical/Electronic Engineering or a related discipline

· Minimum 3 years’experience as Site Manager for SPPG 66/230/400KV Switchgear projects

·       Good Pay + Good allowance + GoodBonus

·       Interestedcandidates please send an updated Resume / CV in Ms Word format to lilian@recruitflash.com or WhatsApp’syour resume to 98332779 ( no Calls)

·       Consultant in-charge : Quah LiLian (Lilian) ( Registration No: R1983286 )

• Well Established Industrial Automation Company (MNC)

• $5000 + $6300 + Variable Bonus

• Company located at Woodlands

• Monday – Friday: 8:30am – 5:30pm

• Excellent Welfare & Benefits

Job Scope

• Collaboration with Project Manager and customer to understand design requirements and
• specifications for the product.
• Analyse project requirements and participate in concept generation.
• Design high precision and high-tech automation equipment.
• Selection of standard components such as sensor, pneumatic, motor, servo axis and robotics.
• BOM preparation using SAP.
• Coordinate with fabrication house and component suppliers.
• Report project progress to Project Manager and superior.
• Guide assembly technicians to build and test the equipment.
• Collaborate with cross-functional teams (including design, manufacturing, and quality assurance)to ensure compliance with industry standards and regulatory requirements.

Requirement

• Degree in Mechanical Engineering / Mechatronics or related disciplines
• 5 - 8 years of relevant experiences in automation equipment design
• Proficient in SolidWorks 3D and EPDM software

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOOSOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

ACMV Engineer (Air Conditioning and Mechanical Ventilation Engineer)

Working Days: Monday – Friday
Working Hours: 9am – 5.30pm
Salary: $ 3,800 - $ 5,000
Working Location: Eunos

Industry: Interior Design & Construction Company

Job Responsibilities:

• Design and planning of ACMV and MV systems
• Preparing and submitting tenders (Tender Costing)
• Conducting site surveys and managing the construction site (Site Management)
• Familiar with and arranging ACMV related services
• Assisting in the procurement of engineering equipment and materials (Procurement)
• Supervising on-site installation work to ensure compliance with drawings and specifications
• Assisting in testing and commissioning (T & C) Commissioning) Assisting with system troubleshooting and problem solving
   

Requirements:

• Diploma in Engineering-related experience (Mechanical, Electrical or construction services preferred)
• 2+ years of relevant work experience
• Familiarity with local regulations and standards preferred 

Chin See Min Reg No. : R22107450

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Responsibilities

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Requirements

• Degree in Electrical/Mechanical Engineering
• No experience needed, training provided

Interested candidates, please forward your resume to jalenetan@recruitexpress.com.sg

Consultant: Jalene Tan (R26160390)
Recruit Express Pte Ltd (99C4599)

Field Application Engineer

Salary: $3,800 - $4,600 + Performance Bonus + Claims
Working Hours: Monday - Friday, 8:30am - 5:30pm
Location: Tai Seng

Key Responsibilities

• Drive design-in activities and promote semiconductor solutions to customers.
• Identify and develop new demand-creation opportunities within assigned accounts.
• Collaborate closely with global suppliers and principals on technical promotion initiatives.
• Provide hands-on technical support, troubleshooting, and application guidance to customers.
• Assist customers in the design and implementation of MCU, Analog, and Power solutions.
• Conduct product presentations, technical workshops, and training sessions.
• Support customers throughout the product development lifecycle, from concept to production.
• Build strong technical relationships with customers and key stakeholders.

Requirements

• Diploma or Degree in Electronics & Electrical Engineering.
• 1–2 years of relevant experience within the electronics or semiconductor industry.
• Knowledge or hands-on experience in: Microcontrollers (MCU) and Analog circuits
• Well versed in Power management solutions

Key Responsibilities:

• Lead the architecture design (e.g. memory cells, select transistors, and peripheral devices), process integration, electrical characterization, modeling and simulation, failure analysis for 3D NAND devices.
• Design and execute DoE, analyze the impact of process variations on device performance and reliability (such as durability and data retention), and propose improvement solutions.
• Collaborate with the process development team to assess new device architectures, driving technology iteration.
• Write detailed technical reports and support customers or internal teams in resolving related technical issues.

Required Qualifications:

1. Education: Master's degree or above
2. Major: Microelectronics, physics, material science & engineering, chemistry;
3. Other Requirements:

• 8+ years of semiconductor device work experience, 3+ years of 3D NAND work experience.
• In-depth knowledge of 3D NAND device physics, familiar with its principles, failure modes, and reliability mechanisms.
• Troubleshooting, and problem-solving capabilities, with experience in successfully improving device performance or yield.
• Familiar with advanced semiconductor manufacturing processes and integration flows.
• Strong cross-team communication and collaboration skills.

Summary:

• 5 days Work

• Entry Level are welcome!

• Various industries: Aviation/ Marine/ Automotive/ Enginering Solutions

• Multiple locations hiring: West/ North/ East

• Basic Salary : $2200 - $3000 

• Good Allowance, Bonus and AWS

Job Scope:

• Perform on-site servicing, maintenance, and troubleshooting of machinery to keep operations running smoothly.

• Monitor equipment performance to ensure systems operate efficiently and reliably.

• Assist with the installation, setup, and commissioning of new machines.

• Work with engineers and technicians to support daily operations and technical tasks.

• Attend to client service calls, identify issues, and resolve them quickly.

• Carry out routine inspections to keep equipment in good condition and meeting standards.

• Plan and perform preventive maintenance to minimize downtime and extend equipment lifespan.
  

Requirement:

• Min Nitec/ Higher Nitec/ Diploma in Electrical/ Mechanical/ Marine or other engineering related

• 2 years relevant experiences will be advantage

• Entry level welcome to apply, training will be provided
  

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)

Location: Kaki Bukit
Salary: $4,000 – $5,000
Working Hours: Monday to Friday, 8:00 AM – 5:30 PM
Industry: Semiconductor

Key Responsibilities:

• Design and develop precision tooling, jigs, fixtures, and mechanical components
• Prepare detailed 2D and 3D drawings using AutoCAD and SolidWorks
• Work closely with production and engineering teams to ensure design feasibility and manufacturability
• Modify and improve existing designs based on project requirements
• Ensure all designs meet technical specifications and industry standards
• Support prototyping, testing, and troubleshooting activities

Requirements:

• Diploma or Degree in Mechanical Engineering or related field
• Proven experience in precision engineering and/or semiconductor industry
• Proficient in AutoCAD/ SolidWorks
• Strong understanding of tooling design and mechanical components

To apply, please click on “Apply Now” or email your latest resume to dorothy@recruitlync.com / WhatsApp 85017683.

Ooi Shi Hui Dorothy (R1762852)
Recruit Lync Pte Ltd (22C1000)

About STMicroelectronics

At ST, we are 48,000 creators and makers of semiconductor technologies mastering the semiconductor supply chain with state-of-the-art manufacturing facilities. An integrated device manufacturer, we work with more than 200,000 customers and thousands of partners to design and build products,solutions, and ecosystems that address their challenges and opportunities, and the need to support a more sustainable world. Our technologies enable smarter mobility, more efficient power and energy management, and the wide-scale deployment of cloud-connected autonomous things. We are on track to be carbon neutral in all direct and indirect emissions (scopes 1 and 2), product transportation, business travel, and employee commuting emissions (our scope 3focus), and to achieve our 100% renewable electricity sourcing goal by the end of 2027.

Further information can be found at www.st.com

Key Responsibilities

1. Equipment Ownership & Performance

• Act as equipment owner for a defined set of CMP tools 
• Monitor OEE and uptime, define and drive actions to improve them.
• Analyze equipment alarms, and chronic issues; implement robust corrective and preventive actions.

2. Maintenance & Troubleshooting

• Define and optimize PM (Preventive Maintenance) plans and spare parts strategy.
• Support technicians in complex troubleshooting: mechanical, electrical, pneumatic, vacuum, robotics and software.
• Escalate and coordinate with equipment vendors (remote and on-site) for advanced technical support.

3. New Equipment Introduction & Upgrades

• Participate in specification, selection, installation and qualification of new CMP tools.
• Lead or support process and equipment release to production, including capability and stability checks.
• Manage equipment upgrades, retrofits, and obsolescence mitigation projects.

4. Process & Quality Support

• Work with process engineers to ensure that equipment performance meets process requirements 
• Support yield, quality, and reliability investigations from an equipment perspective
• Ensure equipment operation complies with quality systems (e.g. IATF 16949, ISO 9001, automotive standards where applicable).

5. Continuous Improvement & Industrial Efficiency

• Analyze data and KPIs; identify bottlenecks and chronic losses.
• Lead or participate in Lean/Six sigma/SMED activities for cycle time, cost, energy, and throughput improvements.
• Drive standardization of settings, PM procedures, troubleshooting guides, and documentation.

6. Safety, Environment & Compliance

• Ensure strict adherence to EHS rules (chemicals, slurry, gases, high voltage, vacuum, cleanroom, LOTO).
• Participate in risk assessments, FMEA, and implementation of safety interlocks and procedures.
• Maintain compliance with environmental and regulatory requirements (e.g. waste handling, emissions).

7. Documentation, Training & Knowledge Management

• Create and maintain equipment documentation: procedures, checklists, work instructions, recovery plans.
• Train and coach maintenance technicians on equipment usage and basic troubleshooting.
• Contribute to knowledge base and share best practices across shifts and sites.

Job Requirements:

• A Bachelor’s Degree in Mechanical, Mechatronics, Electrical & Electronics Engineering, Materials Science Engineering, Chemical Engineering or equivalent.
• Min 5 years of relevant work experience in CMP area, familiar with CMP Equipment (AMAT MirraMesa, Ebara F-REX200, Ontrak, etc.).
• Strong troubleshooting skills and deep technical knowledge.
• Knowledge of SPC, FMEA, 8D methodologies.
• Excellent communication, cross-functional collaboration abilities and written skills.
• Positive learning attitude with strong sense of responsibility.
• Strong ownership, a commitment and flexibility to support operational priorities
• Able to adapt in a fast paced environment and work under pressure.

Job Title: Field Engineer for S3/S5 work packages (LV secondary)

Role Overview

We are looking for an experienced Electrical Field Engineer to support an HVDC / Grid Solutions project.

The engineer will be site-based and act as the key technical interface between construction, commissioning, engineering teams, contractors, and clients.

The role focuses on supporting installation, troubleshooting, and commissioning activities related to LV Secondary Systems (S3/S5 work packages), ensuring technical issues are resolved effectively and properly documented.

Key Focus

• Focus on all issues related to secondary LV activities and associated interfaces (mainly but not limited to S3, S5 work packages)

• Ensuring daily monitoring in direct contact with the site teams and the partner(s) responsible for this activity

• This role is essential during Cable connection campaign

• Will provide close support and follow up to the engineering department by proposing documented solutions

• Update or prepare, as appropriate, SMFs under the supervision of the assigned engineering office

• Support the Lead field Engineer and S2 field Engineer during the cable-pulling campaign

Other actions

• Support to the Site Manager during technical meetings involving the client, partners, and subcontractors.

• Collaboration with the Quality and Document Control teams

• Ensures strict adherence to the change management process and the proper maintenance of "As-Built" (marked-up) documentation.

• Participates in technical and coordination meetings related to his engineering activity(ies), as well as those concerning general site operations and mandatory training sessions.

• Ensures that the GFC/SQ/SMF/Red Lines processes are used correctly

• Participates when required to GFC/SQ/SMF/RMU meetings with Site/engineering teams

• Supports all EHS (Environment, Health, and Safety) initiatives and ensures that all solutions to be implemented comply with applicable safety regulations

Requirements

• Degree in Electrical Engineering or related discipline.

• Experience in HVDC, substations, power transmission, or large-scale electrical projects.

• Similar experience on OCP or OCS station or large AC projects,

• Experience in site-based engineering, commissioning, or construction support preferred.

• Knowledge of LV secondary systems, protection & control, cabling, and electrical installation preferred.

• Strong understanding of electrical drawings, schematics, cable systems, and equipment interfaces. • Strong troubleshooting, communication, and coordination skills.

• Understanding of technical documentation related to the activity (SLD, Layouts and Erection drawing, Principles, Mechanical specifications, Equipment data sheets, BoM, OMM etc)

• Understanding of contractual obligations, limit of scope and evaluating contractual/cost impact of the possible solutions

• Analyzing planning for his scope and estimating the impact of issues.

• Familiar with Office suite (Excel, word)

Project Details

• Start Date: ASAP

• Working Hours: 6 days/week, 54 hours/week

• Overtime: Paid when working beyond 54 hours/week

• Site Allocation: Admiralty, Singapore with occasional travel to Batam site for work

• Contract length: 1 year (Extendable)

Position Overview:

• Develop image/video processing algorithms for camera related applications.

Responsibilities:

• Expand existing solutions to new levels of functionality, quality, and performance.
• Assist other teams with algorithm implementation, testing and verification
• Drive the productization of the hardware.
• Algorithm documentation
• Collaboration with external researchers.

Requirements:

Key Qualifications:

• BS/MS/PhD in Electrical Engineering, Computer Science or equivalent.
• Knowledge of image processing algorithm development;
• Good understanding of digital photography, image quality assessment.
• Proficiency in C/C++
• Demonstrate great teamwork, outstanding communication skills, and willingness to learn.

Advantageous:

• Familiar with image and color processing techniques, including HDR, AWB, color correction, noise reduction, IR removal/suppression and CFA demosaicing, etc.
• Proficiency in developing, implementing and deploying image processing algorithms for ISPs, or CMOS image sensors
• Strong mathematics background and track record of independent algorithm research.

Highlights

• No experience required as training provided 

• Gross salary up to $3,200, including shift premium and allowances

• AWS + Variable Bonus (15% of Annual Salary) 

• Company transport from Boon Lay, Choa Chu Kang, Joo Koon, Pioneer, Woodlands, and Jurong East

• 2-2-3 shift pattern, average 14–15 working days per month
  

Job Responsibilities

• Operate production equipment and support daily manufacturing activities

• Perform quality checks and report any abnormalities

• Complete production documentation and system transactions accurately

• Follow GMP, GDP, SOP, safety, and quality requirements

• Maintain good housekeeping and support continuous improvement activities
  

Requirements

• NITEC / Higher NITEC or equivalent

• Candidates with or without experience are welcome

• Able to work 12-hour rotating day/night shifts on a 2-2-3 schedule

• Comfortable working in a cleanroom environment

• Responsible, disciplined, and willing to learn

All the responsibilities we will trust you with:

• Installation, maintenance and servicing of a wide variety of equipment including but not limited to:

1. General security systems
2. Alarm systems
3. CCTV systems
4. Access control systems

• Troubleshoot problems encountered on site.
• Diagnose and resolve issues related to network connectivity, server performance, and communication between security systems (e.g., CCTV, alarm systems, access control systems).
• Provide feedback to management on issues faced on the ground.
• Perform routine maintenance and firmware updates on servers, network devices, and security system software to ensure systems remain reliable and up to date.

Your areas of knowledge and expertise that matter most for this role:

• Candidate must possess at least a Professional Certificate/ NiTEC in Engineering (Electrical/Electronic) or equivalent.
• 2 years of working experience in the related field is preferred for this position.
• Candidate must possess a Class 3/Class 3A driving license.

Responsibilities

• Design and implement digital trunked radio systems for MRT/LRT communications, ensuring alignment with project specifications and client expectations.
• Interpret project requirements and translate them into high-performance radio system designs tailored for rail environments.
• Develop and review IT network architectures at radio network system level and BIM-based system drawings to design efficient RF cable routing and comprehensive coverage planning.
• Perform RF engineering analyses, including intermodulation and interference studies, EMC/EMI assessments, cell planning, and RF link budgeting to ensure reliable system performance across both dense urban and rural environment.
• Lead system integration activities, coordinating with other sub-systems, site testing, commissioning, conduct troubleshooting and providing post-deployment warranty support.
• Analyze and interpret complex technical documentation, including schematics, engineering drawings, and design specifications.
• Ensure compliance with all technical and operational project requirements, while securing necessary client approvals.
• Participate in project meetings, handling administrative responsibilities and supporting overall project execution.
• Manage stakeholder engagement, maintaining clear communication with internal teams, clients, suppliers, and overseeing project resources and managing subcontractor activities.
• Implement cybersecurity measures to safeguard radio communication systems against potential threats and vulnerabilities.
• Prepare and deliver technical documentation, design drawings, and presentations using tools such as PowerPoint.
• Troubleshoot and improve system performance by analyzing operational logs, applying system patches, and conducting validation tests

Requirements

• Diploma or Degree in Electronics, Electrical, Telecommunication Engineering, or a related field.
• Good understanding of cybersecurity principles, especially in communication systems.
• Strong multitasking and time management skills, with the ability to perform under pressure and meet tight deadlines.
• Willingness to travel for overseas assignments and adaptable to working hours aligned with railway engineering schedules.
• Proactive and independent, with excellent teamwork and communication skills.
• Proficient in Microsoft Office applications.
• Exposure to radio communication systems from major suppliers is advantageous.
• Familiarity with: Integration protocols for peripheral systems
• Radio network configuration and performance parameters
• RF propagation modeling techniques
• IP addressing schemes and network routing
• IT network infrastructure, including firewalls and LAN switches
• Air interface protocols specific to railway communication environments