JOB SCOPE & JOB RESPONSIBILITIES

• Familiar with RO, demin, mixed bed, ultra-pure, neutralization, chemical preciptation (including HF, heavy metal, backgrind etc.), biological treatment etc. and specialty processes.
• Develop process design packages: heat & mass balances; PFDs; P&IDs; process calculations.
• Perform equipment sizing and prepare specification (pumps, blowers, air compressors, vessels, tanks) and materials selection; define instrumentation and control philosophy with cause-and-effect matrices.
• Liaise with OEMs/vendors to validate technologies and recommend best-fit solutions based on performance, compliance, schedule, and total cost of ownership (CAPEX+OPEX); drive technical clarifications and value engineering.
• Prepare and review equipment lists, line lists, valve list and load lists as required.
• Prepare and check process datasheets for RFQs; evaluate vendor proposals for compliance with technical specs, codes, and regulations; lead technical clarifications.
• Prepare technical proposal according to client's RFQs. Provide solution to clarifications and prepare cost estimation.
• Plan and participate in HAZOP and related reviews, coordinate action close-out.
• Produce/peer-review submission documentation; support project FAT/SAT, plant start-up, performance testing, process optimization, and handover.
• Compile/author ITP/IP and IOM manuals; interface with multidisciplinary teams (C&S, MEICA, controls) and construction/site teams.

JOB REQUIREMENTS

• Degree in Chemical or Environmental Engineering (or equivalent)
• Standards & codes: Familiar with relevant international standards/codes and onshore/offshore practices
• Proficiency with MS Office
• Working knowledge of AFT Fathom (hydraulic analysis) and AutoCAD Plant 3D (P&ID) is an advantage

WORK EXPERIENCES

• Process Engineer: More than 2 years in a similar scope, preferably in Oil & Gas, Power, or Water/Wastewater
• Senior Process Engineer: More than 5 years with demonstrated leadership in design reviews, HAZOP facilitation/close-out, vendor management and mentoring junior engineers.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.) is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer/ Senior Engineer to be part of our Diffusion (Wet) Department diverse team of talent.

What you will be working on:

• To sustain and improve all equipment performance indices to meet operations goals

• Perform shift duties based on rotation systems to support production
• Optimize equipment uptime/ reliability thru scheduled & recovery maintenance. 
• Control equipment performance indices to meet BBS goals
• Comply to ISO standards and Quality systems of the company
• Forecast/ establish stock levels of spares and consumables to meet manufacturing capacity within allocated budget
• Establish and maintain preventive maintenance OI to standardize equipment practice
• Train/ mentor AEs to through OJT and continually upgrade their technical skills to cope with technological changes
• Recommend improvement to enhance capabilities, reliabilities or cost saving
• Participate in CIT team/ task force to optimize equipment performance and COO
• Start-up new equipment to support production ramp, from facilities hook-up, vendor start-up, to acceptance of equipment.
• Documentation of Corrective Action and Best-Known Methods for equipment to allow more efficient troubleshooting
• Ensure good housekeeping and safety practices in the work area.

More about you:

• Degree in Electrical/Electronics/Mechanical Engineering Diploma in Mechatronics/ Electronics/ Mechanical Engineering with at least 4 years semiconductor equipment maintenance experience.
• 1-3 years relevant experience innthe semiconductor manufacturing environment. Fresh Degree holders are welcome to apply.
• High Vacuum maintenance experience
• Basic semiconductor wafer fabrication equipment/ process knowledge
• Able to interpret electrical/ pneumatic schematic drawings
• Team Player
• Possess a strong sense of responsibility

SSMC is firmly committed to upholding equal employment opportunities for all individuals. We strictly adhere to the Tripartite Guidelines on Fair Employment Practices (TGFEP), the Singapore Food Safety and Security Act 2025 (FSSA 2025), and the Singapore Code of Advertising Practice. All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Key Responsibilities

• Define and manage vehicle configurations across multiple product variants.

• Design, develop, and improve mechanical and automotive systems.

• Work closely with cross-functional teams, including electrical and software engineering teams.

• Conduct simulations and analyses to verify and validate design performance.

• Build and evaluate mock-ups/prototypes to collect data, assess functionality, and enhance designs.

• Participate in design review activities with internal and external stakeholders.

• Maintain comprehensive documentation covering design activities, test outcomes, and compliance with contractual and regulatory standards.

• Provide technical support to manufacturing teams to facilitate production and resolve design-related issues.

Requirements

• Bachelor’s degree in Mechanical Engineering, Mechatronics Engineering, Automotive Engineering, or a related discipline.

• At least 2 years of relevant professional experience.

• Solid knowledge of vehicle systems, product variant management, and BOM structures.

• Proficient in 3D CAD software (e.g., SolidWorks) and familiar with engineering simulation tools such as FEA and CFD.

• Strong analytical and problem-solving abilities with a focus on practical and innovative engineering solutions.

• Effective written and verbal communication skills, with the ability to collaborate in a multidisciplinary team environment.

• Detail-oriented, results-driven, and committed to engineering quality, continuous improvement, and technical excellence.

If interested, please submit your application to cvs@jdawms.com with your expected salary and resume.

We regret that only short-listed candidates will be contacted shortly. By submitting your application or resume, you agree to the collection, use, retention, and sharing of your personal information with potential employers for their assessment.

JDA WMS Pte Ltd | EA Personnel: Pham Thi Tuyet Mai 

EA License No: 23S1595 | EA Registration No: R25127838

Key Responsibilities:

• Design and test electrical systems and circuits.
• Troubleshoot and resolve electrical issues.
• Ensure compliance with safety and industry regulations.
• Collaborate with teams on project development.
• Document technical specifications and reports.

Requirements:

• Bachelor’s degree in Electrical Engineering or related field.
• Strong problem-solving and analytical skills.
• Knowledge of power systems, electronics, and automation.

Working days: either 4 days 12 hours rotating shift or 5 days work week

Location: Islandwide , office at Woodlands

Salary: $2800 -$3500 depends on experience

Job scope:

• Semiconductor machines startup and installation

• Perform equipment on-site installation, diagnosing, troubleshooting, servicing, and repairing

• Perform equipment continuous improvement programmes, preventive maintenance, modifications and repairing works

• Serves as company contact point with customer on technical matters

• Attends to customers complaints and provides timely solutions

• Other ad hoc duties

Requirements:

• Nitec/ Diploma in Mechanical/ Mechatronic Engineering or related discipline

• Hands-on experience in semiconductor machine maintenance

• Able to work in cleanroom environment
  

Kelly Chong Reg No:R26161160

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Maincon | A2 Construction Company
• Basic $4000 to $5800 + AWS + VB
• Construction Industry
• Training Provided

Job Responsibilities:

• Assist in coordination and execution of M&E works on site
• Support Project Engineers in monitoring project progress and quality
• Work closely with consultants, subcontractors, and site teams
• Assist in preparation of shop drawings and coordination drawings
• Learn to interpret construction drawings and specifications
• Ensure work is carried out according to safety and quality standards
• Attend site meetings and gain exposure to project management processes
• Any other duties assigned by supervisor

Requirements:

• Diploma and / or Degree in M&E Engineering or equivalent
• TRAINING Provided

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Summary

You will serve as a Full Time Site In-Charge, leading on-site operations to ensure safe, high-quality execution of tunneling works including Mined Tunnels and Cross Passages. You will collaborate closely with project teams to drive progress and uphold project standards.

Responsibilities

• Lead daily site operations to ensure timely and efficient work execution
• Assisting the project manager at times in need
• Apply knowledge of tunneling works such as Mined Tunnels and Cross Passages to oversee technical site activities
• Conduct regular inspections of construction sites to identify and eliminate potential safety hazards, ensuring a safe working environment
• Enforce site safety rules rigorously to minimize work-related accidents and injuries
• Supervise sub-contractors and in-house workers to maintain productivity and quality standards
• Collaborate with site operations staff to align work progress with the project schedule
• Verify that installations are performed according to construction drawings to meet design specifications
• Monitor work progress and quality continuously to ensure compliance with workmanship standards
• Attend daily tool-box meetings and communicate clear, actionable instructions to the workforce
• Ensure full understanding and compliance with project requirements and scope of work
• Prepare detailed Daily Reports and Production Reports to document site activities and progress
• Strong skills in interpreting and reading drawings
• Mechanical Knowledge needed
• Proficient in preparing Bar Bending Schedules (BBS) will be advantage
• Must be knowledgeable in AutoCAD usage and functions
• Fluent in English

Electrical Engineer (Quality Control)

• Office: King George’s (Jalan Besar / Lavender MRT)
• Project Site: TUAS areas (Transport provided for designation MRT station to site office)
• Junior: $4000 to $4500, Senior: $4500 to $6000
• Working days: Mon to Fri 8/8.30am to 5/5.30pm, Sat may need works depends on site (if works 8 hours can claim allowances)
• Diploma or Degree in Electrical Engineering or equivalent.
• At least 3-5 years’ experience in electrical QC for large-scale construction, industrial, or infrastructure projects.
• Strong knowledge of LV/MV electrical systems, standards, and QA/QC practices.

Interested applicants can also send your resume to (Liwenpoh741#gmail.com) and allow our consultant to match you with our clients. No Charges will be incurred by Candidates for any service rendered.

WA ME 97354019 for more Electrical Engineer role

Job scopes

• Implement and manage quality control procedures for electrical works on site.
• Conduct inspections, audits, and testing of electrical installations, equipment, and materials.
• Review and verify electrical shop drawings, material submissions, and method statements for compliance.
• Monitor workmanship to ensure alignment with project specifications and quality standards.
• Prepare non-conformance reports (NCRs), track corrective actions, and ensure timely closure.
• Liaise with consultants, clients, and subcontractors to resolve quality related issues.
• Maintain quality documentation, inspection records, and test reports.
• Support handover and commissioning by ensuring all electrical quality requirements are met.

POH LI WEN REG NO: R25136683

THE SUPREMEHR ADVISORY PTE LTD EA NO: 14C7279

Job Description

• Industry/ Organization Type: Manufacturing (Machinery & Equipment)
• Position Title: Assistant Engineer (Environment Testing & Drafting)
• Working Location: Kent Ridge
• Working Hours: 5 days (Mon – Thu, 830am – 600pm; Fri, 830am – 530pm)
• Salary Package: Basic salary up to $3,500 + AWS
• Duration: Permanent Role

Key Responsibilities

• Conduct lab tests using equipment like electrodynamic shakers and temperature/humidity chambers according to test procedures.
• Guide test operators in using equipment to meet test requirements.
• Make approximately 10 trips to different laboratories every quarter
• Coordinate with equipment designers to schedule functional checks on the products being tested.
• Perform visual inspections of products before and after testing, following a checklist.
• Notify customers of any test anomalies and discuss necessary follow-up actions.
• Record and provide test and inspection results.
• Undertake mechanical drafting and design tasks.

APPLY NOW!!!

• Higher NITEC or Diploma in Mechanical Engineering.
• Experience with ESS/PDU/GD&T is beneficial but not required.
• Ability to work independently with minimal supervision.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #72103 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Lead Repair Development Engineer, Joining Technology

We are seeking an experienced Lead Repair Development Engineer, Joining Technology to drive the development, industrialization, and deployment of advanced joining and repair technologies across a global repair network. You will be part of the Advanced Manufacturing & Repair Technology (AMRT) team, partnering with engineering, manufacturing, supply chain, and repair facilities worldwide to enhance quality, productivity, and operational performance.

What We're Looking For

• Bachelor's Degree in Welding, Materials, Manufacturing, Mechanical Engineering, or a related engineering discipline.
• 8 years of manufacturing experience, including at least 5 years specializing in joining technologies.
• Strong expertise in:
• Laser cladding processes
• Superalloy welding and brazing metallurgy
• Numerically Controlled (NC/CNC) machinery
• Solid understanding of manufacturing and repair processes within industrial environments.
• Strong analytical, troubleshooting, and problem-solving capabilities.
• Effective communicator with the ability to collaborate across global and cross-functional teams.
• Familiarity with Lean Manufacturing principles and continuous improvement methodologies.
• Willingness to travel approximately 10% for project support and global collaboration
• Knowledge of industrial gas turbine components and repair technologies.
• Exposure to thermal spray coatings, surface finishing, machining, sealing, and related repair processes.

Key Responsibilities

• Lead the development and industrialization of advanced joining and repair technologies to support manufacturing and repair operations globally.
• Design and implement innovative repair solutions to support new product introductions and component repair strategies.
• Develop validation plans for repair materials and laser cladding technologies in collaboration with New Repair Introduction teams.
• Drive successful technology transfer and qualification of repair service centers, ensuring compliance with repair standards and certifications.
• Execute engineering projects involving process design, analysis, evaluation, and continuous improvement initiatives.
• Provide technical expertise in joining technologies, including welding, brazing, laser cladding, and related metallurgical processes.
• Monitor project progress, communicate key developments, and ensure timely delivery of objectives.
• Maintain high-quality technical documentation in accordance with engineering and business requirements.
• Identify and implement productivity and process improvement opportunities across the global repair network.
• Collaborate closely with component engineering, manufacturing, supply chain, and global stakeholders to deliver impactful solutions.

Join a Global Energy Technology Leader

Be part of a world-leading energy technology organization dedicated to accelerating the transition to a more sustainable and reliable energy future. With a strong global presence and decades of engineering excellence, the company delivers advanced power generation technologies and innovative solutions that help industries and communities thrive. Employees enjoy opportunities to work on cutting-edge technologies, collaborate with international teams, and make a tangible impact on the future of energy.

If you're passionate about advanced manufacturing, materials engineering, and developing world-class repair technologies, we'd love to hear from you.

Site Engineer

• Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm, Saturday may need to work half day depends on project (Can claim OT)

• Office at City Hall, Project site at Changi Airport

• Salary: $3800 to $5400

• Bachelor's Degree in Civil & Structure Engineering

Interested applicants can also send your resume to (Liwenpoh741#gmail.com) and allow our consultant to match you with our clients. No Charges will be incurred by Candidates for any service rendered.

WA ME 97354019 for more Site Engineer role

Job scopes

• To coordinate with consultants / subcontractors on the shop drawings / samples / method statements and keep all involved parties updated of the latest changes.

• To attend to project / technical meeting and resolve site issues with owner / consultants in order for the site progress to proceed smoothly.

•  To verify the work done on site are in accordance to the approved drawings / specifications / authority’s requirement and also ensured that the subcontractor carry out rectification for non-compliance.

• To resolve site issues with consultants / subcontractor / supplier ASAP in order to minimise delay to the construction progress.

• To ensure that the related documentations are updated and ready for ISO audit.

• To cooperate with the safety department and carry out the assigned duties within the safety framework.

• Assist site management team in project Planning & coordination.

• Arrange and prepare documents for authorities’ submission for Conquas, RI, TOP etc.

POH LI WEN REG NO: R25136683

THE SUPREMEHR ADVISORY PTE LTD EA NO: 14C7279

• Contract: 1 year renewable/ convertible

• Location – Ang Mo Kio + project sites

• Salary Range – $3000 to $3500

• Working Days & Time: Mon to Fri (8.30am to 6pm)

Job Descriptions:

• Perform maintenance, troubleshooting, preventive servicing, installation, upgrading, and technical support works for the Card Access System

• Carry out troubleshooting, fault diagnosis, and rectification of system issues, including the replacement of defective hardware components and devices where necessary

• Perform scheduled preventive maintenance (PM) works to ensure the system operates efficiently and reliably.

• Attend to breakdowns, service calls, and technical issues promptly to minimize system downtime and ensure continuous operation of the Card Access System

• Perform additional installation, upgrading, testing, and commissioning works for Additions & Alterations (A&A) projects as and when required

• Assist in system configuration, basic programming, and verification testing to ensure proper integration and functionality of newly installed or replaced equipment

• Maintain proper service documentation, maintenance records, and reports for all maintenance and installation activities carried out

• Observe and comply with all workplace safety requirements, operational procedures, and company guidelines while carrying out duties on-site

Job Requirements:

• NITEC / Higher NITEC / Diploma in Electrical, Electronics or related disciplines

• Candidates without experience are welcome to apply as training will be provided

• Basic knowledge of electrical or electronic systems will be an advantage

• Hands-on, willing to learn, and able to work independently as well as in a team environment

• Able to travel to customer sites for maintenance and installation works

• Willing to perform overtime and standby duties when required

If you are interested, please submit your application here. We appreciate your application and will notify you if you are shortlisted for the role.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Outsourcing Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persoloutsourcing.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

EA License No: 90C3494 | EA Personnel No: R21103663 | EA Personnel Name: Azhar Anuwar

Job Responsibilities:

• Plan, execute, monitor, and control all technical aspects of projects.
• Lead or contribute to new system/network infrastructure setups or upgrades.
• Support operational systems in line with contractual Service Level Agreements (SLAs).
• Conduct routine preventive maintenance and manage operational activities efficiently.
• Prepare comprehensive project documentation and reports.
• Troubleshoot and resolve technical issues promptly.

Requirements:

• Strong knowledge of Windows Server OS and Linux OS; experience in virtualized environments is a plus.
• Hands-on experience with virtualization, hypervisors, and the Nutanix platform is an advantage.
• Understanding of VPNs and firewall appliances is beneficial.
• Familiarity with network switches and routers is preferred.

• Working Location: Woodlands North Coast
• Working Days: Monday – Friday
• Working Hours: 9:00am -6:00pm
• Starting Salary: $3,500 to $6,500

Roles & Responsibilities

• Designing, manufacturing, and installing components that fulfil requirements
• Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement)
• Analysing problems or deficiencies and developing solutions to resolve them
• Conducting experiments and evaluations to improve and innovate product designs
• Creating plans and designs using CAD technology
• Evaluates final product’s overall performance, reliability and safety
• Estimating budgets and time scopes for each project
• Writing technical documentation for machine operators
• Ensuring that products meet compliance regulations
• Collaborating with project managers and other engineers in our team
• Liaison with vendors on finalization of modules
• Responsible for mechanical documentation

Job Requirement

• Bachelor’s Degree in Engineering (Mechanical/Mechatronics) with at least 2 years of mechanical engineering experience, preferably in the semiconductor industry or with strong equipment-related exposure
• Hands-on experience in CAD, CAM, and Matlab/LabView programs for simulation and data analysis
• Experience in troubleshooting PC-based fully automated equipment in semiconductor or similar industries
• Knowledge in die bonder application and process will be an advantage.

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Mechanical Design Engineer (Semiconductor Tooling Design)

5 days, 8.30am-6.15pm

Salary: $3500- $6000

Location: Ubi 

Company background:

Specializes in Semiconductor Backend Tooling including Die Attach Tools, Wire Bond Tools & Bond Test Tools

Job Responsibilities:

• Design and development of Semiconductor Tools and mechanical systems.
• Planning, Scheduling and Costing of Tools and Mechanical Modules
• Responsible for 3D & 2D drawings, tolerance analysis, BOM preparation.
• Working closely with Electrical, Vision and Software Engineers.
• Willing to work extended hours in critical phases of project execution.

Job Requirements:

• Diploma or Degree in Mechanical Engineering or related Technical disciplines.
• Minimum 3 years of design experiences in semiconductor tooling
• Experience with Design and Development of High-Speed Pick and Place Systems, Flip Chip Bonders, Die Attach Machines, and Lamination Machine is a definite plus
• Proficiency with CAD Software is a must.
• Experience with vision application, thermal modelling, calculation and measurement techniques would be an advantage.

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279