Total 5,477 system technician job vacancies

JOB DESCRIPTION:

* Prepare shell drawing once received Architect and Structure drawings from Client.

* Liaise with the client about shell drawing before proceeding with Aluminium Formwork.

* Attend site meetings, Consultant meetings if requested and report regularly the progress to HOD.

* Communicating with architects and engineers, and incorporating knowledge gained into drawings.

* Identifying and communicating potential design errors to the rest of the team.

* Preparing, reviewing and redrafting alongside the engineering team.

* Preparing Setting Out Drawings and Material List to Client.

REQUIREMENT:

* Possess at least a Diploma / Degree in Architecture or Structural Engineering.

* Minimum 2 Years of working experience in Architectural and Structural drawings.

* Proficiency in software (AutoCad, Revit, etc) are added advantage.

* Ability to work well in a team and independently.

* Ability for communication with difference parties.

* Good Attendance and responsibilities in duty.

* Willing to learn, hardworking, self-disciplined, and able to complete task within the timeline given.

* Fresh graduates are also encouraged to apply.

Job Scope :

• Conduct routine checks on chiller operations, including chilled and cooling water temperatures, and inspect all service line utilities (water, compressed air, and natural gas) for leakage. Any defects or problem must be reported immediately to the Supervisor / HOD.
• Check and record compressor operating parameters, including pressure, temperature, motor current (ampere), slide valve position, motor speed, oil level, and running hours.
• Carry out water analysis for town water samples, including town water, drinking water, cereal water, and DPRS water.
• Record water meter readings daily.
• Attend breakdown plant in case trip or power down.
• Handel ammonia chiller troubleshooting isolation valve check area leaking & fix leaking area.
• Measure and record water conductivity, pH, and ORP for cooling towers (SA, RM, Nescafe, and chilled water systems), and inspect and clean water filters.
• Follow safety procedures and wear appropriate PPE when working with chillers, cooling towers, compressors, and ammonia or other work that requires PPE.
• Report any accidents or safety incidents immediately to the Supervisor / HOD.

Perks & Benefits

• Medical insurance
• Shift Allowance
• Overtime

Job Summary

Software Systems Engineering is an arm of systems engineering that addresses the development of complex software-intensive systems. It involves analyzing, designing, developing, testing, and maintaining a broad range of software based on specific user needs, while taking into consideration the quality, time, and budget required. The individual needs to understand and be able to explain all features of the system software. The SSE needs to work with the product owner, developers, and QAs on understanding how the system should work and how the software supports its functionality.

Job Responsibilities

• A Software Systems Engineer will assess a problem and design a new system or improve the existing one to make it better and more efficient. They need to demonstrate superb technical competency, deliver mission-critical infrastructure, and ensure the highest availability, performance, and security.

• Consult with cross functional developers ( electrical, mechanical, software, manufacturing ) to determine system functional specifications

• Analyze and assess software system functionality and architecture, and at times develop prototypes and participate in every aspect of software development, including user needs and requirements gathering, documentation, design, programming, quality control, release engineering, and software sustaining,

• Travel to customer site, as needed, to support software/product issues, or to understand software’s functional and operational needs from the customers.

• Work as technical and project liaison between customer and development team, playing a key role for solution delivery. Create and document the system architecture using proven methods.

• Analyze and verify that system designs meet requirements

• The SSE will work with other engineers to understand, develop, and assure that algorithms used in the software are documented and incorporated in the Software Requirements Document.

• The SSE works with team leads and developers to create the software development plan.

• The SSE should work with the development team in reviewing and suggesting improvements to the software test plan.

• Actively embrace continuous improvement of self and of the team. Provide constructive feedback to peers to improve the team and processes.

• The SSE supports story definition, providing the clarifications necessary to assist the team with their story estimates and sequencing.

• The SSE needs to focus on the software as a system. The SSE should understand software interfaces, support and control of third-party devices.

• Other duties may be assigned as required.

Requirements

• Requires degree in Computer Science or Engineering plus 7+ years of relevant experience.

• Experience working withC#/.Net.

• Windows multithreading and asynchronous communication. Experience withCAN bus and Ethernet/serial port communication

• Professional working proficiency in English is required, including reading, writing, speaking, and listening.

• Knowledge and experience in Agile development.

• Proven work experience in installing, configuring, and troubleshooting software/hardware systems.

• Familiarity with UML and/or other systems modeling capabilities

• Customer support experience.

Apply Link: https://jobs.persolmalaysia.com/detail/38871?apply_id=38871&utm_source=jobstore&utm_medium=sponsored

Contact Email: jessie.ng@persolapac.com

Perks & Benefits

• Personal leave
• Open culture
• Personal development opportunities

WE ARE HIRING: Engineer / Technician

Join COSMOWAVE – Malaysia’s Sole Distributor for Industrial Leak Testing Equipment.

We are looking for hands-on individuals ready to grow in a dynamic, field-based environment.

Key Responsibilities

。Installation, commissioning, and servicing of leak testing equipment

。Provide on-site troubleshooting and technical support

。Equipment calibration and performance verification

。Deliver after-sales technical assistance

。Prepare service and technical reports

Frequent Outstation Required

This role involves regular travel to customer sites. You will gain valuable hands-on industrial exposure and real-world technical experience.

If you prefer active, field-based work instead of being desk-bound, you will fit right in.

Requirements

。Hands-on technical skills and problem-solving mindset

。Willing to travel for outstation assignments

。Responsible, proactive, and eager to learn

。Relevant experience is an advantage (Fresh graduates are encouraged to apply)

。Ability to communicate in Mandarin is preferred (due to business communication needs)

Why Join COSMOWAVE?

。Competitive salary package

。Technical training and skill development

。Fast-track practical experience

。Exposure to advanced industrial testing technology

。Young and supportive working environment

。Clear career growth opportunities

At COSMOWAVE, you are not just taking a job — you are building real technical expertise for your future!

Concrete Plant Technician – Job Scope

• Perform routine inspection, maintenance, and troubleshooting for batching plant machinery and equipment.
• Ensure concrete batching plant operates smoothly and efficiently at all times.
• Repair and service electrical, mechanical, hydraulic, and pneumatic systems.
• Monitor plant performance and identify any operational issues or breakdowns.
• Carry out preventive maintenance according to maintenance schedule.
• Coordinate with plant operators and production team to minimize downtime.
• Maintain and troubleshoot control panel, sensors, motors, and batching system.
• Ensure calibration and accuracy of weighing and batching equipment.
• Record maintenance activities, repair works, and spare parts usage.
• Ensure plant machinery complies with safety and operational standards.
• Assist in installation, testing, and commissioning of new plant equipment.
• Respond immediately to emergency breakdowns and technical issues.
• Monitor spare parts inventory and report shortages when necessary.
• Maintain housekeeping and cleanliness of workshop and plant area.
• Follow company SOP, safety regulations, and site requirements.

Perks & Benefits

• Personal leave
• Paid training and development

Concrete Plant Technician – Job Scope

• Perform routine inspection, maintenance, and troubleshooting for batching plant machinery and equipment.
• Ensure concrete batching plant operates smoothly and efficiently at all times.
• Repair and service electrical, mechanical, hydraulic, and pneumatic systems.
• Monitor plant performance and identify any operational issues or breakdowns.
• Carry out preventive maintenance according to maintenance schedule.
• Coordinate with plant operators and production team to minimize downtime.
• Maintain and troubleshoot control panel, sensors, motors, and batching system.
• Ensure calibration and accuracy of weighing and batching equipment.
• Record maintenance activities, repair works, and spare parts usage.
• Ensure plant machinery complies with safety and operational standards.
• Assist in installation, testing, and commissioning of new plant equipment.
• Respond immediately to emergency breakdowns and technical issues.
• Monitor spare parts inventory and report shortages when necessary.
• Maintain housekeeping and cleanliness of workshop and plant area.
• Follow company SOP, safety regulations, and site requirements.

Perks & Benefits

• Personal leave
• Paid training and development

ASG Security Sdn Bhd is seeking a motivated and experienced Service Technician to join our growing team in the security systems industry.

The ideal candidate is hands-on, reliable, and passionate about delivering quality service and technical support. You will be responsible for the installation, troubleshooting, maintenance, and servicing of security systems while ensuring excellent customer satisfaction.

Join a company that values teamwork, professionalism, and continuous growth, and be part of a dynamic environment with opportunities to develop your technical skills and career.

Job Responsibilities

Perform installation, maintenance, configuration, testing, commissioning, and troubleshooting of CCTV, Card Access, Intrusion Detection Systems, networking, storage, hardware, and software.

Attend to customers’ queries, support, services, and issues.

Involved in cabling, wiring, mounting, and termination works.

Report site details, work done, project progress status, customer requests or feedback, and issues to the reporting Manager/Supervisor.

Update the documentation and provide operational training.

Liaise/manage with suppliers/vendors and outsourced contractors for delivery works.

Requirements

Candidate must possess at least a Professional Certificate, Diploma, Advanced Diploma, or Bachelor’s Degree in Engineering (Electrical/Electronic, Computer/Telecommunication, others)

3 years of relevant work experience in a similar industry.

Possessed a driving license with own transport (Car).

Basic knowledge in cabling, networking, electronics, & computer.

Strong analytical, excellent communication, and interpersonal skills.

Able to work independently with minimal supervision.

A team player to achieve corporate goals.

Ability to accept new challenges, develop new skills/knowledge, and constantly engage in learning new technologies, methods, and processes.

Must be willing to work overtime or late hours when required for project/site support.

Why Join Us?

✅ Career growth opportunities

✅ Exposure to enterprise security systems

✅ Supportive team environment

✅ Training and skill development opportunities

Perks & Benefits

Allowance (travel stipends, transportation, etc.)

Nearby public transport

Paid training and development

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)

Scope : Responsible for all indoor and outdoor repairing and servicing jobs. To ensure all jobs are done in an effective and efficient manner to meet Company’s short and long term objectives and to execute all jobs according to Company’s Values.

Job Description

• Responsible to assist Head of Department to ensure all repair and service
• jobs are completed in timely manner according to department standard of procedure.
• Site inspection, troubleshoot and provide resolution for customer pumps problem.
• Ensure all reports and records are updated after completion of work.
• Responsible for material planning for service department when necessary.
• Mechanical troubleshooting.
• Pump overhaul job.
• Carry out maintenance checklist, preventive and corrective maintenance.
• Fabrication job.
• To carry out any other duties & ad-hoc assignments as when needed.

Requirements

• Candidate must possess at least Secondary School/SPM/"O" Level,
• Higher Secondary/STPM/"A" Level/Pre-U, Professional Certificate in Mechanical / Electrical Engineering or equivalent.
• Required language(s): English and Bahasa Malaysia.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Basic electrical / mechanical knowledge for troubleshooting will be added advantage.
• Familiar with mechanical tools, i.e. welding equipment.
• Hardworking, reliable and positive working attitude.
• Must be willing to travel outstation when necessary.
• Possess valid driving licence.

Perks & Benefits

• Open culture
• Personal development opportunities
• 5 working days.
• Work Location : Johor Bahru
• • Able to start work immediately will be an advantage.

Job responsibilities:

• Handling walk-in customer and sales team in related to service related process.
• Attend ad-hoc service case (Klang Valley) whenever is needed from time to time basis.
• Assist service supervisor on related task with service operation process.
• Stock keeper & inventory monitoring for spare part.
• Perform any other ad-hoc duties as assigned by management.

Job specifications:

• Min. SPM qualification.
• Able to converse & read English & Malay language.
• Microsoft words & Excel. (For data entry only).
• Experience in inventory management.
• Added advantage for technical knowledge with problem solving skills.

Perks & Benefits

• Medical include wellness
• EPF
• Sosco

WE ARE WELCOME for any roles that related to Manufacturing CNC Machines.

Responsibilities:

• Setup independant machine and offset adjustment according to the drawing provided.

• Requirements: Not necessary possess at any certificate exp like Diploma/Bachelor's Degree but priority and advantage if available.
• Related working experience will be an added advantage.
• Good command of language; both written and spoken in English and Bahasa Malaysia.
• Known about basic equipment caliper , micrometer and dial indicator.
• Motivated, willing to learn, hardworking, result-oriented and a team player.
• Good communication and interpersonal skills.
• Ability to work independently.
• Training will be provided.
• If you are able to programming and setup independently we may discuss furtherly for salary pay.
• Fresh graduates are encouraged to apply.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Attendance benefit
• Personal leave
• Panel Clinic
• EPF & Socso
• Personal development opportunities
• Remote work flexibility

Job Responsibilities:

• To involve in preparing installation, assembling, commissioning & troubleshooting of security systems such as CCTV, Card Access System, intelligent alarm monitoring systems and etc.
• To involve in testing of in-house as well as 3rd party security products.
• To help customers to solve technical issues.
• To involve in servicing of security products.
• To report service & repair status to their respective supervisor.
• To assist in preparation & submission of various technical reports to their respective supervisor.
• To provide system or product training to the customers 

Requirement:

• Required Skill(s): Microsoft Office, Technical Knowledge in ELV Systems, ,ICT and computer is an added advantage.
• Analytical thinking and Good Self Discipline
• Ability to work independently without much supervision.
• Ability to work flexible shifts and to adapt to change work schedules.

Perks & Benefits

• Annual leave
• Personal development opportunities
• Medical Allowance
• Provide Company's Transport
• Hard ship Allowance
• Bonus

Reports to: Factory Manager or Operations Manager

Working Hours: Monday - Friday (830am - 5pm), Saturday (830am - 1pm) - alternate Saturday arrangements may be requested upon confirmation

Open to Malaysian nationals only.

Job Summary

The Maintenance / Instrument Technician / or Assistant Engineer is responsible for ensuring the efficient, safe, and reliable operation of all facility and production equipment systems, including HVAC (chiller systems), electrical, mechanical, and plumbing infrastructure. This role supports continuous manufacturing operations by performing preventive maintenance, troubleshooting breakdowns, and coordinating repair activities to minimize downtime and ensure compliance with safety and regulatory standards.

Key Responsibilities

1. Maintenance & Repair

• Perform scheduled preventive maintenance (PM) and corrective repairs on HVAC systems (including chiller systems), electrical systems (including 3-phase), and mechanical equipment.
• Ensure all equipment operates at optimal performance to support uninterrupted manufacturing processes.

2. Troubleshooting & Breakdown Response

• Diagnose, troubleshoot, and rectify equipment faults and system breakdowns in a timely and efficient manner.
• Implement effective corrective actions to minimize production downtime and prevent recurrence.

3. Monitoring & Inspection

• Conduct routine inspections and facility walkthroughs to identify abnormalities such as unusual noise, vibration, heat, or leaks.
• Monitor equipment performance and record relevant operational data for analysis and improvement.

4. Contractor & Vendor Coordination

• Supervise and coordinate external contractors for specialized maintenance, repairs, calibration, and facility improvement works.
• Ensure all contractor activities comply with company safety and operational standards.

5. Safety & Compliance

• Adhere to and enforce all health, safety, and environmental procedures, including Lock-Out Tag-Out (LOTO).
• Ensure all maintenance activities comply with internal policies and regulatory requirements (e.g., GMP where applicable).

6. Documentation & Reporting

• Maintain accurate and up-to-date maintenance records, logs, and checklists.
• Manage spare parts inventory and ensure timely replenishment of critical components.
• Prepare reports on maintenance activities, breakdowns, and improvement initiatives.

7. Continuous Improvement

• Support initiatives to improve equipment reliability, efficiency, and maintenance practices.
• Provide input on process improvements, equipment upgrades, and cost-saving measures.

8. Ad-hoc Responsibilities

• Perform any other duties and ad-hoc tasks as assigned by management from time to time, in line with operational requirements.

Job Requirements

Education

• Certificate or Diploma in Mechanical, Electrical, or a related engineering discipline.

Experience

• Minimum 3–5 years of hands-on experience in facility or equipment maintenance, preferably in a manufacturing environment.

Skills & Competencies

• Strong technical knowledge of HVAC (chiller systems), electrical (3-phase), and mechanical systems.
• Ability to read and interpret technical drawings, schematics, and manuals.
• Proficient in troubleshooting and problem-solving under time-sensitive conditions.
• Able to work independently with minimal supervision and as part of a team.
• Proficient in English/Bahasa, Mandarin a plus

Physical Requirements

• Physically fit and able to:
• Lift up to 25kg
• Climb ladders
• Work in confined or elevated spaces

Preferred Attributes:

• Experience in GMP-regulated or manufacturing environments
• Basic knowledge of utilities systems (RO water, compressed air, etc.)
• Familiarity with preventive maintenance systems and documentation practices 
• Able to communicate and work efficiently and coordinate with operations team and management

Perks & Benefits

• EPF, SOCSO, EIS
• Medical Insurance
• All gazetted public holidays observed
• Annual leave up to 16 days/year subject to years of employment
• Commission and bonus - subject to individual and company performance
• Paid training and development - HRDF claimable courses subject to relevancy

Responsibilities:

• Perform highly diversified duties to install and maintain production machines.
• Provide emergency/unscheduled repairs of production equipment during production.
• Translate and interpret equipment manuals and work orders to perform required maintenance and service.
• Diagnose problems, replace or repair parts, test and make adjustments.
• Perform regular preventive maintenance on machines, equipment and plant facilities.
• Utilise a variety of hand and power tools, electric meters and material handling equipment in performing duties.
• Identify faulty operations, defective material and report those and any unusual situations to proper supervision.
• Adhere to safety regulations and maintain clean and orderly work areas.

Requirements:

• Proven experience as maintenance technician.
• Basic understanding of electrical, hydraulic and other systems.
• Familiarity of general maintenance processes and methods.
• Working knowledge of tools, common appliances and devices.
• Manual dexterity and problem-solving skills.
• Solid physical condition and strength with a willingness to work overtime.
• Minimum SPM/O level or equivalent; Certificate in HVAC, building maintenance technology or relevant field will be a plus.
• Certified Maintenance

Perks & Benefits

• Open culture
• Personal development opportunities

Responsibilities:

• Operate, maintain, and troubleshoot factory utility systems, including electrical power distribution, compressed air systems, chilled water and cooling systems, HVAC, gas supply, scrubber systems, and wastewater treatment plant (WWTP) equipment.
• Perform water sampling and basic laboratory testing (e.g., pH, COD, BOD, TSS), analyze results, and adjust chemical dosing as required to ensure compliance with standards.
• Ensure a stable and continuous supply of utilities to production lines and critical equipment.
• Monitor utility performance and identify abnormalities to prevent production downtime.
• Carry out general maintenance and handyman tasks as assigned by the supervisor.
• Execute preventive maintenance (PM) activities for all facility and utility equipment.
• Perform troubleshooting and corrective repairs with minimal disruption to production.
• Identify recurring issues and support root cause analysis and implementation of corrective actions.
• Provide on-site technical support during production hours.
• Respond promptly to any facility-related issues affecting production.
• Assist in machine installation, relocation, and commissioning from a facilities perspective.
• Ensure compliance with EHS, fire safety, and regulatory requirements.
• Adhere to shutdown/startup procedures, permit-to-work systems, and contractor safety guidelines.
• Support internal audits, customer audits, and regulatory inspections.
• Participate in emergency response situations (e.g., power failure, gas leaks, fire alarms, water leaks).
• Maintain accurate records for maintenance, breakdown reports, and utility consumption.
• Support 5S practices and maintain good housekeeping in facility areas.
• Provide on-call or shift support for facility-related emergencies.
• Carry out any other duties as assigned by the Company.

Requirements:

• Minimum Diploma or Certificate in Engineering (Electrical, Mechanical, Mechatronics, or related field).
• At least 1–3 years of working experience in factory facilities, utilities, or maintenance environment.
• Basic knowledge of facility systems such as electrical distribution, HVAC, compressed air, chilled water, and wastewater treatment systems.
• Ability to perform basic troubleshooting and maintenance of equipment.
• Familiarity with preventive maintenance (PM) practices and safety procedures.
• Knowledge of EHS (Environment, Health & Safety) requirements and regulatory standards is an added advantage.
• Ability to work in a fast-paced manufacturing environment and support production needs.
• Willing to work on shifts, on-call, or during emergency situations when required.
• Good teamwork, communication, and problem-solving skills.
• Responsible, disciplined, and able to work independently with minimal supervision.

Perks & Benefits

• Allowance
• Medical insurance
• Open culture

Job Description

• Develop, maintain and generate smart scope programs for use in inspection, verification of production materials for incoming, outgoing, FAI and in-process parts.
• Work closely with the QA team to measure, examine and test molded part to identify defects and non-conformance to specification.
• Manage and maintain all measurement machine to ensure functionality and meeting production needs.
• Prepare and submit required report(s) or documentation ensure clear identification of product inspection status

Qualification :

• SPM / Diploma in any related field
• Able to read 2D or 3D drawings
• Good knowledge of measurement equipment such as smart scope, caliper, height gauge etc. is an advantage
• Good communication skill and able to communicate effectively with other function teams
• Able to work in a team and individually
• Able to work under the environment with fast tempo
• Good attendance and punctuality to work

Perks & Benefits

• Open culture
• Personal development opportunities