Total 3,876 Maintenance / Repair job vacancies in Overseas

Responsibilities:

• Performs set-up/changeovers, takes corrective action to eliminate production defects and reduce in-process losses with minimal support from superior.
• Performs machine preventive maintenance and prepares machines for line clearances.
• Troubleshoot equipment and coordinate corrective actions to reduce or eliminate defects, rejects, or equipment downtime with minimal support from Superior.
• Perform all assigned duties according to departmental SOP’s.
• Remain current on proper procedures by reviewing current, revised, and new SOP’s relating to the job and to the department.
• Ability to use, clean, and store tools and other devices required for the performance of the job in a manner which prevents damage to the tools and / or equipment.
• Maintain a clean and organized work area during and at the end of each shift.
• Effective and efficient operation of manual and automated equipment.
• Follow the related legal requirement in working environment practice such as ISO requirement, Safety requirement etc. based on the Superior decision.
• Responsible to Control related Confidential item and make sure the material is not leak to other parties and follow the implementation of the preventive action.
• Attend the informal or formal inhouse or external training as to increase the awareness of the necessary training scope which relevant to the work base on Superior plan.

Competencies:

• Able to use precision measurement device and accurately measure within 0.5μm.
• Ability to multi-task and have the Hands-On skill.
• Excellent hand-eye coordination and manual dexterity and able to read technical drawing.
• Ability to work any shift (up to 12-hours) as required dependent on business needs.
• Physically able to continuously stand and walk.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal leave
• Personal development opportunities
• Yearly performance based increament.

職責：

• 執行設定/換型工作，採取糾正措施消除生產缺陷並減少過程中的損失，上級支援極少。
• 執行機器預防性維護，並為生產線清場做好準備。
• 在Superior提供的最小支援下，對設備進行故障排除並協調糾正措施，以減少或消除缺陷、不合格品或設備停機時間。
• 依照部門標準作業規程履行所有指派的職責。
• 透過查閱與工作和部門相關的現行、修訂和新的標準作業規程 (SOP)，隨時了解正確的操作流程。
• 能夠以不損壞工具和/或設備的方式使用、清潔和存放工作所需的工具和其他設備。
• 在每個班次期間和結束時，保持工作區域清潔有序。
• 有效率、有效地操作手動和自動化設備。
• 根據上級指示，遵守工作環境實務中的相關法律要求，例如 ISO 要求、安全要求等。
• 負責管控相關機密事項，確保資料不洩漏給其他方，並跟進預防措施的實施。
• 根據上級計劃，參加非正式或正式的內部或外部培訓，以提高對與工作相關的必要培訓範圍的認識。

能力：

• 能夠使用精密測量設備，測量精度可達0.5μm。
• 具備多工能力和動手能力。
• 手眼協調能力強，手部靈巧，能讀懂技術圖。
• 根據業務需要，能夠勝任任何班次（最長 12 小時）。
• 身體能夠持續站立和行走。

福利待遇

• 員工權益
• 佣金和獎金
• 津貼（旅費、交通費等）
• 醫療保險
• 個人休假
• 個人發展機會
• 根據年度績效進行加薪。

Job Summary

Manicurists provide daily nail and hand care services, including manicures, pedicures, massages, and nail treatments, while delivering excellent customer service and maintaining a clean, sanitary work environment.

Responsibilities

• Discuss nail treatments, nail care and treatment options, and available services with clients to guide their choices
• Remove nail polish safely and efficiently to prepare nails for services and/or treatments
• Clean, trim, and file nails to achieve desired shapes and maintain nail health
• Reduce calluses and smooth rough skin to improve hand and foot comfort
• Massage and moisturize hands during manicures and feet during pedicures to enhance client relaxation
• Perform manicures and pedicures tailored to client preferences to ensure satisfaction
• Deliver exceptional customer service and build strong client relationships to encourage repeat visits
• Maintain a clean, sanitary, and organized workstation and environment to meet hygiene standards
• Stay informed on the latest nail trends and techniques to offer modern services
• Adapt to a fast-paced work environment while maintaining quality and attention to detail

Pest Control Technician

• Location: Tanjong Pagar
• Working Days: 5.5 days
• Working hours : 8am to 5pm, 8am to 12pm
• Salary : $1,600 - $2,600 (depend on experience)

Job Requirements:

• At least 1 - 2 years of Pest control experience
• Possess NEA license  & Class 3 driving license (vehicle can discuss to drive back)

Job Responsibilities:

• To ensure prompt and timely pest control service at customers’ premises
• To provide good quality service to customers
• To carry out pest inspections at customers’ premises
• To submit a service report promptly
• To maintain company equipment in good and working condition

Interested applicants kindly submit your resume through here or Whatsapp +65 9019 3218 (Joevy), and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Tan Yu Jing Reg No: R26161199

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Location: Project Site (Singapore)

About the Role

We are seeking a Facilities Management Executive to support the daily operations and maintenance of a government project site. The role involves coordinating maintenance works, ensuring compliance with regulatory standards and to maintain building performance and safety.

Job description:

• Assist in carrying out building and structural inspections in compliance with BCA periodic inspection requirements.

• Prepare inspection reports, technical reports, and photographic documentation.

• Assist in preparing method statements, work procedures, and risk assessments.

• Support the Project Manager in daily operations for maintenance and small-scale construction works.

• Supervise and coordinate site activities, including repair, rectification, and minor construction works.

• Liaise with subcontractors, suppliers, and site personnel to ensure smooth work progress.

• Monitor work quality, progress, and compliance with drawings, specifications, and safety requirements.

• Attend site inspections, meetings, and progress reviews.

• Assist in preparing progress reports, material submissions, and site records.

• Ensure compliance with workplace safety regulations and company procedures.

Requirements

• Diploma or Degree in Building Services or related field

• 1–4 years of relevant experience in facilities management, building maintenance, or construction projects

• Experience in government or institutional projects will be an advantage

• Able to work in a site-based environment

• Good coordination and communication skills

Benefits

• Annual leave

• medical benefits

• Opportunity to gain experience in government projects

Preferred Profile (Nice to Have)

• Familiar with safety regulations and permit-to-work systems

• Hands-on and willing to be involved in site coordination

Why Join Us

• Stable project environment with structured processes

• Exposure to government-sector facilities standards

• Opportunity to grow within facilities and project management

Job Description:

• In charge of leading and directing projects and ensure they are directed towards a common objective
• Responsible for engaging and communicating with stakeholders to deliver project milestones and comply with strict deadlines
• In charge of ensuring client satisfaction and manage escalations, acting as single point of contact to the client
• In charge of ensuring that the project delivers as-sold solution, remains within the baseline budget and is delivered on time whilst maintaining quality criteria and client satisfaction
• Coordinate activities of the project teams through task delegation, resource assignment and programme management
• Take charge of proper documentation is in order
• Any other duties as assigned

Job Requirement:

• Minimum Nitec in Electronics / Mechanical / Electrical/ Mechatronics Engineering or related field
• Minimum with 1 year working experience in assembly of equipment / machinery industry

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• Responsible for troubleshooting, repairing, and servicing production machineries, equipment, systems, and infrastructures.
• Responsible to ensure machinery and equipment runs smoothly and reliably. Minimize machine downtime.
• In charge of performing Preventive and Predictive TPM as well as to monitor and control maintenance costs.
• Taking charge of dealing with emergencies, unplanned problems, and repairs of machines breakdown
• Responsible in using Root cause analysis tool to analyze the cause of the breakdown.
• Maintains safe and clean working environment by complying with procedures, rules, and regulations.
• Maintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs.

Requirement:

• Min Nitec in Electrical/ Electronics/ Mechanical Engineering
• Min 3 years of working experience in Manufacturing industry

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Responsibilities

• In charge of supporting the clients by providing training, installation, setup, and upgrades of electronics devices
• Responsible in responding to on-site technical support requests when client raise a request.
• In charge of making scheduled visits to troubleshoot and resolve devices issues.

Requirement

• Min Nitec in Engineering and relevant
• Class 2B or 3 driving license required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

1. Maintain and adjust the condition of electrical assets: Electrical Systems, Equipment, UPS Batteries, Generators

Switchboards, Motors, Wiring, Portable tools etc

• Comply with relevant authorisation procedures, safe working practices and specific instructions.
• Complete maintenance in an agreed timescale, using safe and appropriate methods and agreed procedures.
• Ensure resources and spares are planned for and used cost effectively.
• Ensure the correct, current operating requirements are available for reference.
• Ensure any assets which have been maintained or had parameters adjusted still comply with spec ified operating requirements with minimum disruption and with the specified methods, tools and materials.
• Monitor and record any maintenance or adjustments accurately in work history in MMS.

2. Monitor And Assess The Performance And Condition Of Electrical Assets

• Obtain information or parameters from reliable sources. (Inspection ports, connections, vendor documentary information, instrument readings, diagnostic equipment.) using approved methods Use monitoring equipment or procedures correctly to assess the condition of electrical assets Ensure monitoring and checks are carried out in line with specified MMS timescales and schedules.
• Record and communicate monitored outcomes accurately and in timely fashion to raise the effectiveness of MMS.
• Compare current performance with previous assessments and take action where differences must be addressed

3. Diagnose Faults in Electrical Assets.

• Respond promptly to problems in line with approved procedures.
• Select appropriate tests and diagnostic procedures and apply them methodically.
• Determine the cause, nature and extent of problems in the performance and condition of electrical systems or assets.
• Use the results of inspections to determine the appropriate actions to take.
• Record an accurate and full description in the appropriate document history

4. Monitor and Maintain Pollution Control Measures

• Sample and check that controlled process discharges from area of responsibility to the environment are within prescribed limits
• Identify and halt unplanned discharges where possible, and reported immediately according to policy, procedure and regulation
• Equipment, waste or other materials for disposal are dealt with according to the correct procedure
• Ensure resources such as PPE, materials, tools and spares are accounted and not wasted or used inefficiently

5. Emergency Response

• Carry out Emergency Response Role
• Show competence during drills and exercise

Qualifications and Experience:

• Proven experience and qualified to ONC/ HNC, or NVQ Level 3 or recognised equivalent in Electrical Maintenance Engineering 
• Minimum 5 yrs experience preferred, with 2 years offshore petrochemical experience desired  Good knowledge of PTW, Electrical Isolation Standards, Risk Assessment and Man Management, Power Management System, Generation on LV 
• COMP ex E’x’ Course. 
• Preferred courses: HV/LV Protection and HVLV Switching. Medically fit to offshore International standards such as ENG1 or equivalen

Job Responsibilities

• To assist Project Manager on the day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractor.
• Liaising with authorities, client's representatives, sub-contractors and consultants.
• Checking and ensuring all plans and work are as per specifications.
• Attending site walks, inspections, meetings and preparing of monthly reports and submissions.
• Coordinate and liaise with relevant parties to ensure smooth project implementation.
• To carry out all site works issues and ad-hoc duties when instructed.

Requirements

• Candidate must possess at least a Diploma/Bachelor’s Degree in Civil Engineering or its equivalent
• At least 2 years of working experience in the related field.
• Good communication, self-initiative and interpersonal skills..

Job Description

• In charge of performing metallurgical laboratory sample preparation, sample evaluation and generate evaluation report.
• In charge of performing incoming inspection of direct/indirect material.
• Responsible in assisting calibration and archiving of records.
• Responsible in maintaining lab consumables/spare parts inventory.
• In charge of performing 6S housekeeping.

Requirements

• Min Nitec in Precision Engineering / Aerospace Machining / Mechanical or equivalent
• Min 1 year of experience in laboratory in Aerospace Industry
• Proficient in the use of measuring tools such as Caliper and Micrometer.

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description

• Manage HVAC, mechanical, electrical, and other maintenance operations while ensuring adherence to safety standards and best practices.
• Oversee project tasks and support system testing and commissioning.
• Oversee ACMV, electrical, and building systems, performing troubleshooting, repairs, and preventive maintenance.
• Work closely with contractors to ensure smooth daily operations of commercial and non-commercial buildings. Carry out preventive and breakdown maintenance for mechanical electrical, ACMV and general building services
• Provide best practices in engineering maintenance to provide a safer environment workplace
• Buildup & maintain business relationships with customers and end users in order to achieve expectations with reference to KPI and service level
• Identify areas of opportunities to improve facilities to help generate additional revenue by securing additional work
• Address principal concerns from the client on Fix It Program and devise system to improve by working closely with co-colleagues

Job Requirement

• A minimum of 3 years of relevant experience with a Diploma, 5 years with a Higher NITEC, or 10 years with a NITEC in Facilities Management is required.
• Core Trade/SEC Experience – Minimum 10 years of relevant experience with a Core Trade/SEC (Skill Evaluation Certification) in FM, accredited by BCA.
• Able to thrive in a fast-paced challenging environment
• Need to perform rotating shift duties
• Team player with good interpersonal skills

Job Description

• Masking, grit blasting, and chemically cleaning parts to prepare for coating or heat treatment.
• Operating vacuum furnaces for processes like hardening, tempering, annealing, and brazing.
• Setting up and performing plasma spray coating, judging spray flow and speed for precision.
• Measuring coating thickness, maintaining logs, ensuring work meets specifications and quality requirements.
• Using stackers and other machinery to move materials and parts.
• Completing paperwork, system transactions, and adhering to safety & quality protocols.

Requirements

• Min Nitec in Precision Engineering / Aerospace Machining / Mechanical or equivalent
• Min 2 year of experience in laboratory in Aerospace Industry

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Technician/Assistant Engineer
• Working Location: West (Nearest MRT: Joo Koon)
• Working Hours: 5 days (Mon to Fri: 8.30 am to 6.18 pm)
• Salary Package: Basic + OT Pay + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Operate and monitor equipment for surface treatment (e.g. UV-ozone or plasma), screen printing of conductive and dielectric inks, thermal curing, enzyme dispensing, and pattern cutting (e.g. laser or die cut).
• Maintain production records and documentation.
• Perform basic checks on product quality during production.
• Help improve processes and support pilot production runs.
• Carry out other tasks as directed by supervisors.

APPLY NOW!!!

• ITE – Higher Nitec or equivalent.
• Experience in printed electronics, screen printing, micro dispensing, or biosensor/flexible circuit manufacturing is a plus.
• Good attention to detail and troubleshooting skills.
• Able to work OT on Saturdays if required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #78155 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Sunset Hospitality Group is a leading multinational lifestyle hospitality group, with a wide portfolio encompassing Hotels & Resorts, Restaurants, Beach Clubs, Nightclubs, Fitness Centers, and more.

SHG operates over 81 venues and with presence in 22 countries with a commitment to deliver authentic & diverse hospitality experiences that bring people together, all around the world.

METT Singapore, a Heritage Icon in the heart of Fort Canning Park.

The hotel blends colonial charm with contemporary soul. Just minutes from Orchard Road, this lifestyle hotel features 84 rooms and suites, 2 pools, and exclusive venues for dining, wellness, and social connection. With every detail designed to inspire meaningful moments, METT Singapore is a destination where simplicity meets refined living.

Reporting to the Facilities Manager, the Technician assists in carrying out shift duty smoothly by repairing, maintaining and ensuring that all electrical and mechanical equipment including lighting throughout the hotel are operating satisfactorily.

Your day-to-day responsibilities:

2.1 Assisting the Facilities Engineer with the design of a preventative maintenance program

2.2 Carrying out minor repairs at guest rooms or public areas

2.3 Service and repair all electrical and mechanical equipment such as, but not limited to, motors, starters, switchgears, fittings, wiring, vacuum machines, all laundry, kitchen equipment, cables and all electrical machines throughout the hotel

2.4 Carry out masonry works for all walls, beams, pillars and posts; cement floor traps, floor tiles, vinyl tiles, long bath grouting, pipe duct and staircases

2.5 Clear all obstructions in sewer, waste pipe, soil channels and grease interceptor system

2.6 Repair defective flushing system, toilet bowls, urinals, basins, vent pipes and air-conditioning waste pipes as well as service and clean all grease traps

2.7 Assist other technicians to perform other jobs as required by Management within and outside hotel premises

Knowledge, Skills, and Experience:

3.1 Minimum Professional Certificate/ NiTEC/ Diploma in Engineering

3.2 Minimum 2 years of proven working experience in similar position

3.3 Basic in English language

3.4 Understanding of advanced principles of air conditioning, refrigeration, and heating

3.5 Proficient in balancing air and water treatment systems in line with HVAC protocols

3.6 Proficient in reading schematics and work plans

3.7 Good interpersonal skills

3.8 Positive and high energy level

3.9 Highly cooperative team spirit

3.10 Ability to work in a high stress, faced-paced environment