Total 859 Art / Design / Entertainment job vacancies

Position Overview:

• As a design verification engineer, you will be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

• Experience in UVM verification methodology
• Disciplined, quality-minded, and highly driven for excellence,
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 8 years of relevant experience, but are open to fresh graduates with outstanding results
• Candidates with relevant experiences would be offered as Staff or Sr. Staff, taking on higher responsibilities
• Experience in video processing and video analytics is a plus
• Passionate and strong in general programming is a plus

Key Responsibilities Key Responsibilities

RTL Design and Verification

• Develop synthesizable RTL in Verilog/SystemVerilog for custom on-chip test, monitoring, and diagnostic IP targeting analog and mixed-signal failure detection.
• Design and verify digital logic blocks such as test controllers, sequencing logic, sensor/interface control logic, measurement and monitoring logic, data capture and comparison logic, and failure detection and reporting logic.
• Build clean register and bus-connected interfaces, for example APB, AHB, or AXI-lite based control and status paths, to enable firmware interaction and subsystem integration.
• Develop testbenches, assertions, checkers, and block or subsystem-level verification environments to validate controller behavior, detection logic, configuration programming, fault response, and status reporting.
• Plan and execute functional verification for normal, corner, negative, and fault-injection scenarios, with adequate coverage of critical diagnostic behaviors.
• Collaborate with analog and mixed-signal designers to create or use behavioral models, stubs, and interface abstractions for realistic verification of failure mechanisms and observability paths.
• Debug RTL and simulation issues through waveform analysis, assertion-based checks, root-cause investigation, and close interaction with integration and product teams.
• Ensure the RTL is modular, reusable, timing-aware, synthesis-friendly, and scalable for integration across multiple SoC derivatives.

SoC Integration

• Integrate custom DFT / diagnostic IP into SoC subsystems and system-level test architecture with proper consideration for clock/reset structure, interrupt handling, and status visibility.
• Work closely with SoC integration and DFT teams to ensure compatibility with system test infrastructure, production test flows, diagnostic mechanisms, and firmware control requirements.
• Support integration readiness by addressing CDC, reset interactions, timing considerations, low-power implications, and implementation handoff requirements.

Cross-Functional Collaboration

• Work closely with digital, analog, and mixed-signal design teams, DFT engineers, SoC architects, and product/test engineering teams throughout the design and validation cycle.
• Translate analog or mixed-signal failure modes into robust digital detection logic suitable for on-chip test, screening, and diagnosis.
• Contribute to technical discussions on architecture tradeoffs, observability strategy, and practical silicon debug readiness.

Required Qualifications

• Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field, with 5–7 years of relevant experience.
• Strong hands-on experience in RTL design using Verilog/SystemVerilog.
• Practical experience in RTL verification, simulation, and debugging methodologies.
• Solid understanding of ASIC / SoC design flow including coding, simulation, synthesis, and integration.
• Good foundation in digital design concepts such as FSM design, datapath design, bus protocols (AXI/AHB/APB), clock-domain handling, reset strategy, and timing considerations.
• Experience working in complex SoC environments with cross-functional teams.

Preferred Qualifications

• Experience developing control, monitoring, or diagnostic IP associated with analog or mixed-signal subsystems.
• Exposure to behavioral modeling or interface definition for analog and mixed-signal verification use cases.
• Familiarity with subsystem-level integration, production screening considerations, and silicon debug support.
• Working knowledge of scripting or automation for verification, regression, or design productivity is an advantage.

Job Purpose

The Research Fellow / Research Engineer (with focus on Healthcare Design and Business) will support applied research and innovation in community and allied health by translating health-related workflow needs, user insights and business requirements into practical service-design outputs, implementation plans, value propositions and evidence reports. The role focuses on healthcare design, business scoping, project coordination and implementation support for healthcare projects.

This role is focused on Healthcare Design and Business. The candidate should have a deep understanding of health-related workflows and experience coordinating project implementation with clear outcomes delivered. The Research Fellow / Research Engineer will support academic staff and project leads, and contribute his/her assigned share to team-level KPI targets through practical design, business and implementation outputs.

Key Responsibilities

Applied Research & Development

• Perform clinical needs assessment, user research, service-journey mapping and workflow analysis for organisational innovation transition, focusing on but not limited to community and aged care settings, nursing homes, hospitals, home-based care and palliative care settings.
• Develop healthcare service-design concepts, business requirements and implementation roadmaps for organisational transition, focusing on but not limited to caregiver workload reduction, care-process redesign, adoption planning and care automation support.
• Support healthcare innovation projects by coordinating user feedback, pilot planning, implementation activities, data collection and outcome documentation for Proof of Concept (POC) and deployment in community-care or healthcare settings.

Industry Collaboration

• Support collaborations with industry and healthcare partners to understand workflow pain points, user needs, business requirements and implementation constraints, and contribute to practical solution development.
• Assist in project scoping by gathering workflow, design, business and implementation inputs, and by identifying relevant capabilities within the ecosystem (IHLs, research centres, industry partners).
• Participate in industry meetings, discussions, and project engagements.

Project Execution & Support

• Assist Professional Officers, faculty and project leads in planning, coordinating and executing assigned healthcare design, business and implementation workstreams, including timeline tracking, documentation and follow-up on deliverables linked to the committed KPI areas: service volume, innovation initiatives, value capture, manpower training and ecosystem establishment.
• Generate project reports, presentations, service maps, user-journey documentation, business-case inputs, implementation trackers and evidence documentation on the development, validation, deployment and value capture of healthcare solutions and applications.
• Contribute to grant proposals and project submissions where required.
• Track project progress and maintain proper documentation of milestones, deliverables, risks/issues, partner inputs, funding status and measurable outcomes for assigned projects.
• Support the IaaS Center for Community and Allied Health Innovation in achieving team-level KPI outcomes through assigned design, business, implementation documentation and project support tasks.
• Contribute to assigned analytics workstreams and projects, including data analytics projects and digital dashboard development for industry partners, hospitals, aged care homes, and non-profit organisations, encompassing proposal development, partner engagement, analytics scoping, and project documentation.
• Coordinate assigned workstreams within the team's innovation portfolio, supporting the delivery and deployment of new or improved products, processes, and services to healthcare and community organisations, while monitoring implementation, adoption, and analytics evidence to support value-capture documentation.
• Support training, demonstration, and workshop delivery for company employees and healthcare professionals, contributing to the team's capability-building and knowledge-transfer goals.
• Role-specific skill focus — Healthcare Design and Business: conduct user and workflow research; prepare service maps, implementation plans, business-case inputs and value-capture documentation; support evidence for KPI and project-outcome reporting, including outreach to companies and/or healthcare providers; and translate workflow and business insights into practical recommendations for Professional Officers, faculty, project leads and healthcare partners.

Job Requirements

• Bachelor's degree with 5+ years experience OR Master's degree with 2+ years experience in Health Sciences, Nursing, Healthcare Management, Design, Business, Service Design, Biomedical Engineering, Clinical Research or related disciplines with relevant experience in healthcare design, business scoping, project implementation or healthcare innovation related work.
• Strong knowledge and experience in clinical workflows, particularly in hospitals, nursing homes, home-based care, palliative care settings and other community care settings.
• Hands-on experience in clinical validation studies, including patient needs assessment and usability testing, is highly advantageous.
• Possess understanding of healthcare innovation concepts (e.g., service design, business model development, commercialisation, care automation, health economics and value capture).
• Strong analytical skills and attention to detail. Excellent written and verbal communication skills.
• Resourceful, meticulous and problem-solving attitude.
• Experience supporting or coordinating industry or applied research projects, preferably involving healthcare design, service redesign, business scoping, community care, aged care, allied health, digital health, clinical workflow optimisation or healthcare innovation solutions.
• Ability to document project outputs, implementation progress, stakeholder benefits and other measurable outcomes for assigned work.
• Experience supporting project proposals, funded projects or partner engagements will be advantageous.
• For this Healthcare Design and Business role, relevant experience in health-related workflow analysis, user research, service design, business scoping, implementation planning, stakeholder engagement, value proposition development, benefits tracking or equivalent design/business methods is required.
• All Research Fellow / Research Engineer must possess project-management skills and experience managing or coordinating projects/workstreams with good outcomes delivered, including scope, timeline, stakeholder coordination, risk/issue tracking and documentation.

Key Competencies

• Possess understanding of healthcare challenges faced by industries locally and globally, particularly in the community and aged care sectors.
• Strong interpersonal and communication skills to communicate effectively with industry partners and stakeholders.
• Ability to work collaboratively in a cross-functional and multidisciplinary environment.
• Proactive approach to continuous learning and development in the healthcare innovation field.
• Proficient in technical writing and presentation.
• Possess good analytical and critical thinking skills.
• Shows good initiative and takes ownership of work undertaken.
• Project management skills, including planning and execution of healthcare design, business and implementation projects.
• Project-management discipline to support assigned workstreams, monitor timelines and dependencies, escalate risks, and complete agreed tasks that contribute to team targets.
• Outcome orientation, with ability to document project outputs, stakeholder benefits, implementation progress and individual contribution within a team-based delivery model.
• Capability in healthcare design and business, including workflow analysis, user research, service mapping, business scoping, implementation planning, benefits tracking and preparation of concise reports.
• Ability to coordinate stakeholders, monitor timelines and risks/issues, and deliver assigned project outcomes with clear documentation.
• Ability to work as part of a coordinated delivery team, with clear documentation of assigned design, business, implementation and project outcomes toward the overall KPI commitments.

What you'll do

● Build internal tools and small products that the design community across relies on, from process tools to ways of sharing information and rolling out programs

● Take a hypothesis and turn it into something real and usable, fast

● Work AI-native, using agentic coding tools as the core of how you build, and pushing to see how far they can take us

● Own the tools you build, maintaining them until they grow past a small-scale tool and can be handed off to others to scale

● Work alongside designers to understand what they need and build things that genuinely help them

What we're looking for

● 3-6 years building interactive work as a product designer, with more recent experience as a creative technologist, building interactive prototypes, or in front-end development

● Hands-on with agentic coding tools like Claude Code and Codex, and you've used them to ship real tools and products, not just demos

● You can take an ambiguous problem, define it, and break it down so it can be built well and hold up as it's used

● Enough technical understanding to build things that deploy and stay secure, and to collaborate smartly with people who go deeper on backend and infrastructure

● A portfolio of things you've made and shipped, not just designed

• 5 Work Days, 8.30am-5.30pm / 9am-6pm
• Current Office Near to Kaki Bukit MRT, Singapore
• Will Relocate to Tai Seng MRT in August 2026
• Medical & Dental Benefits Provided
• Entitled to Yearly Bonus & Performance Bonus
• Current Application & Web App are using Java & Node.js **

Job Requirements

• Bachelor's or Master's Degree in Computer Science, Software Engineering, or a related technical discipline
• At least 3 year of software engineer / backend development experience (Java / Node.Js) is preferable for this post
• Strong understanding of computer science fundamentals (operating systems, network principles, data structures, and algorithms)
• Programming Languages: High proficiency in Java (including JVM internals and performance tuning) or Node.js (including its event-driven architecture and asynchronous programming model). Proficiency in both is a significant plus.
• Frameworks & Middleware: Proficient with common open-source frameworks and tools such as Kafka, RocketMQ, Dubbo, Zookeeper, and Redis.
• Deep knowledge of MySQL, including schema design, SQL optimization, and database scaling strategies.
• System Experience: Proven, hands-on experience in building, deploying, and maintaining high-concurrency, high-performance, and high-availability systems.

Job Responsibilities ( Junior / Senior Backend Engineer)

Design & Development

• Take ownership of the design, development, refactoring, and performance optimization of core system components, delivering high-quality and maintainable code.

Technical Innovation & Problem-Solving

• Research, design, and implement innovative solutions to address complex business and technical problems, particularly in high-concurrency scenarios.

System Architecture

• Contribute to system architecture decisions, focusing on scalability, high availability, and fault tolerance.

Full-Lifecycle Participation

• Actively participate in the entire software development lifecycle, from requirements analysis and system design to testing, deployment, and operational monitoring.

Collaboration & Knowledge Sharing

• Work effectively with local and regional team members, as well as business unit partners.
• Share knowledge, promote best practices, and help elevate the team's overall technical capabilities.

Reolink, a leader in intelligent visual technology for homes and businesses, was founded in 2009 by a group of engineers with a strong commitment to and passion for smarter security solutions.

Our products are now trusted by millions of users across more than 110 countries and regions worldwide. Building on this trust, we continue expanding our presence and bringing our innovations to more markets around the globe. 

Reolink remains committed to delivering advanced, reliable, and user‑centric solutions that empower people to protect what matters most.

Responsibilities

1. Campaign Development & Strategy

• Conceptualize and develop end-to-end marketing campaigns aligned with business objectives for product/service acquisition and usage within CBG Singapore.

• Contribute to the overall marketing campaign strategy by identifying opportunities for effective customer engagement and conversion.

• Integrate consumer insights and communication guidelines into campaign development.

2. Creative Asset Production

• Responsible for the development and production of creative assets for ATL and BTL channels, including digital advertisements, digital banners, social media content, out-of-home media, and other marketing collaterals.

• Ensure all creative materials adhere to branding standards and relevant advertising guidelines.

• Utilize creative resource libraries for graphic, web, and templates to support asset creation.

3. Copywriting

• Develop clear, concise, and compelling copy for all marketing materials across various platforms and channels.

• Tailor messaging to specific target customer segments to enhance clarity, relevance, and emotional resonance.

• Ensure accuracy and compliance of all content with regulatory requirements and marketing guidelines.

4. Campaign Execution & Optimization

• Collaborate effectively with internal teams (e.g., product, insights, brand, and performance marketing) to ensure seamless campaign execution.

• Monitor campaign performance, gather feedback, and utilize insights for future campaign optimization and development.

Requirements

• Proven experience in marketing, with a focus on campaign development and creative execution.

• Strong portfolio showcasing successful marketing campaigns, including creative asset development and copywriting samples.

• Demonstrated ability to conceptualize and develop integrated marketing campaigns across ATL and BTL channels.
  

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •EA Registration • Lim Jia Jie EA Registration No. R22108969

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolsingapore.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Job Description:

• Drive the design of next-generation semiconductor automation equipment and modules, transforming ideas into functional designs and prototypes.
• Create detailed fabrication, assembly, and layout drawings using 3D CAD tools, such as CREO, SolidWorks, or other acceptable software.
• Perform structural, kinematic, and dynamic analyses, including Finite Element Analysis (FEA) simulations and tolerance stack-ups, to ensure design robustness.
• Work with software, electronics, and vision engineering teams to integrate mechanical designs into complete system solutions.
• Apply Design for Manufacturing (DFM), Design for Assembly (DFA), and concurrent engineering principles to ensure efficient and robust designs.
• Develop and validate pneumatic and hydraulic circuits and ultra-precision, high-speed pick-and-place mechanisms.
• Contribute to design standardization, cost optimization, and project management for research and development initiatives.

Job Requirement:

• Minimum Degree in Mechanical Engineering or related field
• Minimum 5 year working experience in Mechanical Design in Automation/ Semiconductor Industry

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Summary:

Join Concrid Interior, where your creativity meets opportunity! In this dynamic, commission-based sales role, you’ll enjoy strong company support, quality leads, and the freedom to shape your success. With uncapped earnings and a focus on work-life balance, you'll be empowered to thrive in a rewarding, results-driven environment.

What You’ll Be Doing:

• Respond to incoming sales inquiries (quality leads provided)
• Prepare customised proposals and quotations
• Oversee renovation project sites from start to finish
• Lead and mentor a sales team if you’re a Senior Designer
• No showroom duties required, giving you more time to focus on sales

What We’re Looking For:

• Strong passion for interior design
• Excellent communication skills with the ability to build relationships
• Ability to deliver exceptional after-sales service
• Prior experience in sales or design is a plus, but not required

Benefits:

• Commission-based with uncapped earnings potential
• Proven earning capacity of $5,000–$10,000 monthly for top performers
• Transport allowances to support your work-life balance
• Annual bonuses of up to $15,000
• Monthly performance bonuses based on individual targets and achievements
• Spot bonuses for exceptional performance on key projects or milestones
• Team incentives for hitting collective goals and delivering results as a group

Other Perks:

• Comprehensive sales training to set you up for success
• Receive only exclusive, high-quality leads (new, non-recycled)
• One of the best incentive bonus programs in the industry

Ready to Join Us?

If you’re passionate about interior design and ready to take control of your career, we’d love to hear from you. Unleash your earning potential with Concrid Interior today!

Job Objectives

Analyze and translate business, regulatory, and analytics requirements into scalable data and solution designs. Drive effective stakeholder communication, effort estimation, and validation processes, while enabling data architectures and curation strategies that support reporting, analytics, and AI/NLP-driven use cases.

Key Responsibilities

• Perform detailed effort estimation for projects and change requests.
• Communicate complex technical and architectural concepts to business and senior stakeholders in a clear, simplified manner
• Review and approve test strategies, functional test cases, and data validation approaches.
• Experience translating business and compliance requirements into NLP‑enabled analytical use cases, such as: Text classification and categorization, Entity extraction, Risk indicator identification, Summarization of alerts, cases, or documents
• Ability to translate business, regulatory, and analytics requirements into logical data layering and curation strategies that support reporting, analytics, and AI/NLP use cases
• Analyze business and regulatory requirements and translate them into scalable solution designs.
• Perform detailed effort estimation for projects and change requests.
• Communicate complex technical and architectural concepts to business and senior stakeholders in a clear, simplified manner
• Review and approve test strategies, functional test cases, and data validation approaches.
• Ability to design data architectures supporting NLP and AI‑driven analytics, including ingestion, curation, and governance of unstructured data within Data Lake, Data warehouse platforms.
• Experience translating business and compliance requirements into NLP‑enabled analytical use cases, such as: Text classification and categorization, Entity extraction, Risk indicator identification, Summarization of alerts, cases, or documents
• Ability to translate business, regulatory, and analytics requirements into logical data layering and curation strategies that support reporting, analytics, and AI/NLP use cases

Key Skills:

• Bachelor’s or Master’s degree in Computer Science, Engineering, Information Technology, or a related field.
• Minimum of 9+ years of professional experience
• Requirement Analysis & Solution Design
• Data Architecture & Data Modeling
• AI / NLP Use Case Enablement
• Testing & Data Validation
• Stakeholder Communication
• Effort Estimation & Planning

Responsibilities

1. Develop design requirements for an NPU based on system-level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug any issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 5+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on experience in digital design is a must.
4. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
5. Experience in synthesis, with analysis of power, timing and area.
6. Disciplined, quality-minded, and highly driven for excellence.
7. Excellent team player and good communication skills.
8. MSEE/BSEE in Electrical Engineering or Computer Engineering.
9. Understanding of convolution operator and number system is required.
10. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
11. Experience in UVM verification methodology is a plus.
12. A plus to have SoC design experience.
13. Experience with optimizing micro-architectures for low-power and low-area is a plus.
14. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
15. Experience with past design experience with NPU / GPU / DSP design is a plus.
16. Experience with ARM or RISC-V processor systems is a plus.
17. Passionate and strong in general programming is a plus.

Our esteemed client in the Construction industry is seeking an Assistant Technical Manager (Design Coordination) to join their dynamic team:

• Employment Type: Permanent
• Position: Assistant Technical Manager (Design Coordination) 
• Location: Islandwide
• Working Hours: 5 days, Office Hours
• Salary Package: Basic + Bonus

Job Responsibilities:

• Oversee and guide a team of design and coordination engineers to align engineering drawings with consultant requirements, ensuring strict compliance with regulatory standards and project specifications.
• Lead the team in drafting, preparing, and compiling critical technical documentation, including shop drawings, material approvals, and construction method statements.
• Serve as the primary point of contact and bridge the gap between clients, consultants, contractors, and regulatory authorities on all design and technical matters.
• Monitor and drive the submission pipeline to local regulatory authorities to secure timely clearances and compliance approvals.
• Take charge of resolving design conflicts and site-specific technical challenges by collaborating closely with Architectural and M&E teams, consultants, and authorities.
• Evaluate and manage technical inquiries by issuing Requests for Information (RFI) and Requests for Approval (RFA) to clarify design ambiguities.
• Drive and assess value engineering initiatives aimed at optimizing cost-efficiency, site safety, constructability, and overall project quality.

Job Requirements:

• At least Degree in Civil, Structural, Mechanical Engineering or a related discipline
• Minimum 5 years of working experience in construction or engineering consultancy environment.
• Familiar with local building codes, authority regulations and construction methodologies.
• Proficient in AutoCAD, Revit, Navisworks would be a plus.

Ready to apply? Here’s how: 

• Click the APPLY button, or 
• Email your resume (in MS Word or PDF format) to adelin@intuitrecruitment.com. Include the job title in your email subject line for prompt processing. 

Only shortlisted candidates will be notified. 

By submitting your application, you consent to the collection and use of your personal data under Personal Data Protection Act (PDPA). 

Adelin Chong | EA Personnel Reg No.: R1875641 

Intuit Recruitment Pte Ltd | EA License No.: 25C2793 

Our esteemed client in the Construction industry is seeking an BIM/ Design Coordinator to join their dynamic team:

• Employment Type: Permanent
• Position: BIM/ Design Coordinator
• Location: Islandwide
• Working Hours: 5 days, Office Hours
• Salary Package: Up to $7,000 + Bonus

Job Responsibilities:

• Review, coordinate, and manage design drawings with consultants to ensure full compliance with all regulatory requirements.
• Analyse technical challenges, develop effective solutions, and oversee the planning, monitoring, and reporting of shop drawing production progress.
• Prepare and manage technical submissions for materials, construction methodologies, and Civil & Structural (C&S) shop drawings.
• Manage a team of BIM Modelers in the production of fully coordinated shop drawings and detailed construction plans.
• Resolve design and construction discrepancies by closely liaising with relevant team & regulatory bodies.

Job Requirements:

• At least a Bachelor’s Degree in Civil, Structural Engineering, or related discipline.
• Minimum of 2 years of relevant design and coordination experience with contractors.
• Registered PE with PEB.
• Proficiency in British & Singapore Design Standards.
• Experience with BIM coordination processes and software.

Ready to apply? Here’s how:

• Click the APPLY button, or
• Email your resume (in MS Word or PDF format) to adelin@intuitrecruitment.com. Include the job title in your email subject line for prompt processing.

Only shortlisted candidates will be notified.

By submitting your application, you consent to the collection and use of your personal data under Personal Data Protection Act (PDPA).

Adelin Chong | EA Personnel Reg No.: R1875641

Intuit Recruitment Pte Ltd | EA License No.: 25C2793

Our esteemed client in the Construction industry is seeking an Architecture Design Coordinator to join their dynamic team:

• Employment Type: Permanent
• Position: Architecture Design Coordinator
• Location: Central
• Working Hours: 5 days, 8.30am to 5.30pm
• Salary Package: Up to $6,000 + Bonus

Job Responsibilities:

• Coordinate with a team of BIM Modellers to support design development and project coordination.
• Prepare and update construction-related drawings, including shop drawings for submission and approval.
• Liaise with consultants, subcontractors, and internal teams to track site progress and resolve technical issues.
• Assist in tender preparation and documentation.

Job Requirements:

• At least a Bachelor’s Degree in Architecture or a related field.
• Minimum 3 years of relevant experience with a main contractor, preferably in building or mixed-development projects.
• Proficient in reading and interpreting construction drawings.
• Comfortable working in a fast-paced environment.

Ready to apply? Here’s how: 

• Click the APPLY button, or 
• Email your resume (in MS Word or PDF format) to adelin@intuitrecruitment.com. Include the job title in your email subject line for prompt processing. 

Only shortlisted candidates will be notified. 

By submitting your application, you consent to the collection and use of your personal data under Personal Data Protection Act (PDPA). 

Adelin Chong | EA Personnel Reg No.: R1875641 

Intuit Recruitment Pte Ltd | EA License No.: 25C2793 

We are looking for a creative, hands-on Marketing Executiveto support K.STAR’s brand growth, promotions, and customer engagement.

This role works closely with the Founder and Operations Teamto execute marketing campaigns, manage content, and strengthen K.STAR’s premiumentertainment brand across digital and offline touchpoints.

Key Responsibilities:

Brand & Content Marketing      

Execute KSTAR brand messaging across social media, Website and in-store materials.

Assit in Content creation including:

• Short media posts
• Short-form video
• Poster and visual assets
• Caption EDMs and simpler Copywriting

Social Media & Digital Marketing

Manage daily content posting on platforms such as

•  Instagram/Tikrok/Xiaohongshu(RED)/Wechat
• Monitor engagement, comments, DMs and customer interactions
• Support  digital marketing initiative including:

• paid advertisementsPromotionsand influencer KOL collaborations (if any)

Campaigns & Promotions

Support marketing Campaigns for:

• Membership promotions
• Corporate Clients & events
• Seasonal festive campaigns 

• Assist in on-ground promotion and event execution

Corporate & Partnershipsupport 

• Prepare simple marketing material for corporate Clients (PDF decks, visuals, post)

Support branding:

•  Corporate eventsTeam-building activitiesand private functions.Assist in partnership and collaboration marketing initiatives.

Performance Tracking

• Track basic marketing metrics such as
• ReachEngagement Leads
• Bookings
• Andprepare simple reports and insights for continuous improvement.

Qualifications:

• Diploma or bachelor’s degree in marketing, Mass Communications, Medial or related field.1 – 3 year experience (Fresh graduates with relevant internships of portfolio may considered)
• Familiar with Instagram, TikTok, Xiaohongshu (RED), and WeChat
• Basic content creation skills (copywriting, short videos, simple visuals)
• Comfortable using tools like Canva, CapCut, or similar
• Good communication skills
• Hands-on, proactive, and able to work in a fast-paced environment
• Flexibility to work irregular hours, including evenings and weekends, as required for events.

Our client, a leading semiconductor company, is seeking a Principal Silicon Architect to drive the design and development of advanced System-on-Chip (SoC) solutions.

Responsibilities

• Define and lead end-to-end SoC architecture across compute, interconnect, memory, I/O, and accelerator components
• Translate product requirements into scalable silicon designs aligned with performance, power, area (PPA), and security targets
• Develop and maintain architecture and microarchitecture specifications, including interfaces, data flows, clocking, and power strategies
• Lead PPA modeling, trade-off analysis, and optimization efforts
• Architect and integrate robust SoC security features such as secure boot, root of trust, and isolation mechanisms
• Drive cross-functional collaboration across hardware, software, verification, and system teams
• Lead architecture reviews, influence key decisions, and mentor engineering teams

Qualifications

• MS or PhD with 12+ years of experience in SoC architecture or design
• Proven track record of delivering complex SoCs from concept through silicon
• Expertise in CPU subsystems, interconnects (AXI/NoC), and memory hierarchies
• Strong experience in system-level architecture, specification development, and requirements management
• Demonstrated capability in PPA modeling and optimization
• Experience with MBSE methodologies (e.g., SysML) and modeling tools such as Python, MATLAB, or SystemC
• Solid understanding of hardware security architecture (secure boot, root of trust