Total 548 structural engineer job vacancies

Responsibilities:

• Acts as the main technical advisor on construction sites, supervising staff, tools, and materials to ensure projects are completed safely, on time, and within budget.
• Interpret technical designs, set out site layouts, provide technical advice, and enforce safety regulations.
• Setting out, leveling, and surveying the site to establish building locations, grades, and elevations, ensuring all structural work follows design plans.
• Overseeing daily construction activities, managing subcontractors, and coordinating materials and labor to meet project goals.
• Providing technical solutions to site issues and conducting quality assurance inspections to ensure compliance with standards and regulations.
• Enforcing safety protocols, conducting safety audits, and ensuring compliance with Occupational Health and Safety (OHS) regulations.
• Maintaining accurate project documentation, such as site diaries, daily progress reports, and change orders.

Requirements:

• Min Degree in Civil Engineering or related field
• Min 3 years of relevant experience in geotechnical works and site supervision
• Experience in pipe jacking, tunnelling, or mining works preferred
• Knowledge of safety regulations and geotechnical construction standards

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

• Acts as the main technical advisor on construction sites, supervising staff, tools, and materials to ensure projects are completed safely, on time, and within budget.
• Interpret technical designs, set out site layouts, provide technical advice, and enforce safety regulations.
• Setting out, leveling, and surveying the site to establish building locations, grades, and elevations, ensuring all structural work follows design plans.
• Overseeing daily construction activities, managing subcontractors, and coordinating materials and labor to meet project goals.
• Providing technical solutions to site issues and conducting quality assurance inspections to ensure compliance with standards and regulations.
• Enforcing safety protocols, conducting safety audits, and ensuring compliance with Occupational Health and Safety (OHS) regulations.
• Maintaining accurate project documentation, such as site diaries, daily progress reports, and change orders.

Requirements:

• Min Degree in Civil Engineering or related field
• Min 3 years of relevant experience in geotechnical works and site supervision
• Experience in pipe jacking, tunnelling, or mining works preferred
• Knowledge of safety regulations and geotechnical construction standards

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

• Acts as the main technical advisor on construction sites, supervising staff, tools, and materials to ensure projects are completed safely, on time, and within budget.
• Interpret technical designs, set out site layouts, provide technical advice, and enforce safety regulations.
• Setting out, leveling, and surveying the site to establish building locations, grades, and elevations, ensuring all structural work follows design plans.
• Overseeing daily construction activities, managing subcontractors, and coordinating materials and labor to meet project goals.
• Providing technical solutions to site issues and conducting quality assurance inspections to ensure compliance with standards and regulations.
• Enforcing safety protocols, conducting safety audits, and ensuring compliance with Occupational Health and Safety (OHS) regulations.
• Maintaining accurate project documentation, such as site diaries, daily progress reports, and change orders.

Requirements:

• Min Degree in Civil Engineering or related field
• Min 3 years of relevant experience in geotechnical works and site supervision
• Experience in pipe jacking, tunnelling, or mining works preferred
• Knowledge of safety regulations and geotechnical construction standards

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

• Acts as the main technical advisor on construction sites, supervising staff, tools, and materials to ensure projects are completed safely, on time, and within budget.
• Interpret technical designs, set out site layouts, provide technical advice, and enforce safety regulations.
• Setting out, leveling, and surveying the site to establish building locations, grades, and elevations, ensuring all structural work follows design plans.
• Overseeing daily construction activities, managing subcontractors, and coordinating materials and labor to meet project goals.
• Providing technical solutions to site issues and conducting quality assurance inspections to ensure compliance with standards and regulations.
• Enforcing safety protocols, conducting safety audits, and ensuring compliance with Occupational Health and Safety (OHS) regulations.
• Maintaining accurate project documentation, such as site diaries, daily progress reports, and change orders.

Requirements:

• Min Degree in Civil Engineering or related field
• Min 3 years of relevant experience in geotechnical works and site supervision
• Experience in pipe jacking, tunnelling, or mining works preferred
• Knowledge of safety regulations and geotechnical construction standards

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of providingengineering support for product modifications, cost reductions, manufacturing process improvementsResponsible f
• In charge of leading and participating in design and development activities from concept to production with a well-defined Product Development Process.
• Responsible in driving successful development of new product development projects, research and develop ideas for new and improved designs of the components part
• In charge of generating design specifications, design proposals and/or product designs that meet customer requirements.
• Responsible in working with cross-functional team involved in new product development and manufacturing

Job Requirement:

• Minimum Degree in Mechanical/ Manufacturing/ Electronics Engineering or related field
• Minimum 2 years of working expereince in product design in components

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description

• Responsible in analyzing and troubleshooting customer issues via phone or email as well as on-site
• Taking charge of conducting product application testing for sales reps and customers.
• Responsible in conducting post sales application training to customers.
• In charge of receiving phone calls or emails from sales reps and customers and answering to the enquiries concerning product capabilities, specifications, and applications
• Responsible in creating and updating manuals for post sales application training for customers.
• Responsible to travel yo customer’s site for on-site support including setup, adjustment/ finetuning the system.
• In charge of assisting sales engineer with on-site presentations to customers when required
• Other duties or projects, as assigned

Requirements

• Minimum Diploma in Electrical / Electronic Engineering or equivalent
• Minimum 1 Years of working experience in industrial equipment industry
• Familiar with Logic control, Microsoft Excel skills, communication protocol (i.e Serial, Modbus TCP, Ethernet, EIP etc.) and HMI programming

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• Identify and manage projects and sales opportunities and develop new accounts to drive revenue growth with potential & existing customer.
• Prepare and deliver technical presentations explaining product or services to existing and prospective customers.
• Understand customers’ needs and competitors in order to develop strategy to win sales.
• Liaise and work closely with sales support staff/application engineer.
• Provide sales and first-level technical support to all customers’ enquiries, deliveries and issues or feedback.
• Product selection and generate quotations based on RFQ.
• Project sales management and submission of Sales Report.

Job Requirements:

• Min Diploma in Engineering (Mechanical) or equivalent.
• Min 1 years of working experience in the related field is required.
• Possess Class 3 Driving License.

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.

EA License No: 17C8900

Job Description:

• In charge of designing the PCB layout of electronic circuit boards and generate Gerber files for PCB fabrication.
• Responsible in research and define efficient and reliable architecture to fulfil electronic circuit board requirements for the company drone systems.
• In charge of firmware programming in embedded C/C++ language.
• In charge of testing PCB assemblies thoroughly and ensure they operate as expected.
• Responsible in sourcing suitable electronic components to implement the design architecture.
• In charge of studying datasheets of the electronic components and design the schematic of electronic circuit boards that can fulfil the requirements.
• Responsible in generateing documents and drawings of design and test.

Job Requirement:

• Minimum Degree in Mechanical/ Electrical/ Aerospace/ Mechatronics Engineering or relevant
• Minimum 3 years of working experience in electronic hardware and firmware design
• Experience in analog and digital circuit design with experience in designing electronic circuits with microcontrollers, digital signal processors (DSP), field programmable gate arrays (FPGAs), etc
• Proficient in schematic and PCB design tools such as Altium Designer, OrCAD Capture and PCB Designer, Autodesk EAGLE, etc and using instruments such as multimeters, oscilloscopes, logic analysers, etc. to troubleshoot issues on electronic circuit boards.
• Proficient in C/C++ programming language.
• Knowledge in various communication buses and protocols such as UART, I2C, SPI, CAN, Ethernet, etc.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Precision Engineering or relevant
• Min 5 years of experience in Metal Machining industry with experience in Supplier Quality/ Audit
• Oversea travelling is required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Job Description:

• Responsible for creating manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• In Charge of developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for creating CNC code/program for machining as well as designing toolings, fixtures and gauges.
• In charge of creating special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding etc.
• Responsible for conducting pre-production pilot run and training for associates.
• Provide technical support to Production to achieve technical and quality requirements.
• Responsible in liaising with OEM on product requirements, process qualifications and technology development.
• Support continuous improvement projects and Request for Quote (RFQ) proposal development and process

Requirement

• Min Degree in Mechanical/Manufacturing/Aeronautical/Material Engineering
• Min 3 years’ experience in precision engineering in Manufacturing Environment with competent with CAD software;
• Experience in special processes such as Heat Treatment, Brazing, EDM, Shotpeening and Welding will be advantage

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.

EA License No: 17C8900

Job Description:

• In charge of Implementing and maintaining the Quality Management System standards and Environment, Health and Safety SOPs and Manuals.
• Responsible in ensuring adherence to Compliance and Regulatory Oversight for Standard Operating Procedure, Quality and Safety Manuals, Maintenance Organisation Expositions.
• In charge of Certification Audits by Civil Aviation and liaising with assigned CAA Principal Maintenance Inspector for approvals, certifications and inspections.
• Responsible in conducting Internal Quality Audit, External vendor QMS audits as well as managing vendor qualification into the Approved Vendor List
• Take charge of assigned audit conducted by Customer.
• In-Charge of the Quality and Safety of assigned workshop
• Responsible for conducting investigations for incidents and accidents, warranty
• Responsible assisting the Manager in developing, reviewing, improving and implementing quality and safety management procedures
• Attend meetings and other duties as delegated by the Quality Manager

Requirements:

• Min Diploma in aerospace engineering/engineering
• Min 3 years of in QMS in Aerospace Industry.
• Qualified Auditor is required

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities

• Develop annual maintenance schedules for servers, workstations, RTUs/PLCs, networks, cybersecurity appliances, and field instrumentation
• Execute and document routine servicing, firmware upgrades, patch management, database backups, and fail-over tests in approved maintenance windows
• Lead root-cause analysis for SCADA alarms, network faults, hardware failures, and telemetry data issues
• Mobilize field teams, liaise with service providers, and restore service within SLA
• Scope, budget, and deliver small-scale upgrades
• Produce method statements, risk assessments, test scripts, and handover packs
• Serve as primary contact for clients, engineers, consultants, Stratus/Kepware/Schneider support, and telecom providers
• Chair weekly maintenance coordination meetings and issue minutes, progress trackers, and service reports
• Analyse failure trends, recommend spares optimisation and lifecycle refresh plans
• Propose automation of health checks, log analytics, and remote diagnostics to reduce meantime-to-repair

Requirement

• Min Diploma in Electrical, Control & Instrumentation or related engineering fields
• Min 3 years of experience in SCADA/PLC/RTU maintenance or automation project delivery, preferably in water or critical infrastructure
• Working knowledge of Wonderware/ Aveva System Platform, Kepware OPC, DNP3, Modbus, Stratus ft Server, Cisco/ Hirschmann managed switches, and Windows Server administration
• Familiar with CCOP2 cybersecurity guidelines, ISO 27001 controls, and basic networking

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900