Total 805 infrastructure engineer job vacancies in Quality Assurance / Control category

SQE (Supplier Quality Engineer) for Assembly sites (OSAT an IM sites)

Key Responsibilities

Supplier Quality Management & Liaison

Act as the primary quality interface between suppliers and Renesas, ensuring alignment with quality requirements and expectations.

Quality Excursion Management & Corrective Actions

Lead the investigation of quality issues using structured problem-solving methodologies (e.g., 8D), and drive effective corrective and preventive actions to closure.

Supplier Audit, Certification & Change Control

Maintain and execute the supplier audit program, and support supplier process/material change management and site certification activities.

New Supplier Assessment & Qualification

Provide quality leadership in the evaluation and qualification of new subcontractors supporting Automotive, High Reliability, Industrial, and Commercial markets.

Continuous Improvement Leadership

Analyze quality trends, manage improvement projects, and influence cross-functional teams to drive continuous improvement at subcontractor sites.

Training & Best Practice Deployment

Deliver supplier quality training and support the development and deployment of best-known practices across subcontracted manufacturing operations.

• Responsible as the line/process quality for the Sensors and ASICs production line. Ensure the line/process is complied with quality requirements. Interfacing with Process/ Equipment Engineer.
• Responsible for the product quality for Sensors and ASICs, internally and externally, including incoming product quality issues and customer issues. Interfacing with Product Engineer, Simultaneous Engineering (SE) Team, Central Customer Quality Engineer and/or Central Supplier Quality Engineer.
• Responsible to key in report, generate quality notification in SAP such as Q-Info, Delivery Release and QM-View.
• Responsible for the problem-solving coordination and moderation for the quality issue internally and externally as Problem Solving Expert.
• Responsible as the SPC coordinator for the Sensors and ASICs line.
• Support as PgP5 Internal Auditor, including audit execution, closing and effectiveness verification of audits focus on IATF 16949 and VDA 6.3.
• Support any external/customer audits, including follow-up and closing of related OPL.
• Support department 6S activity.
• Support change management 4M checklist verification.
• Support lessons learned activity. Sharing input to the lesson learned plant coordinator. 
• Support MSA study, including review of MSA study reported by Process/Equipment Engineer.
• Support Daily Leadership Meeting for any quality issue regarding Sensors and ASICs line.
• Responsible for return materials to supplier, including the improvement of the return process.
• Responsible for IB process for return material from customers.
• Responsible for continuous improvement in the area of responsibility.
• Execute any other related duties assigned by supervisor from time to time.

Key Responsibilities

• Hands-on in ensuring the daily stability and efficiency of global, high-density data centers and critical computing infrastructure.
• Monitor, analyze, and optimize our systems to cut down on equipment failures and energy losses caused by harmonics or voltage fluctuations.
• Build and roll out PQ monitoring strategies for our critical power systems to help us hit strict Tier III/IV availability targets.
• Set up, commission, and run both temporary and long-term monitoring using tools like Fluke (435/1760/174), Dranetz, Hioki, or PQube.
• Tracking everything from harmonics and flicker to voltage dips and three-phase imbalances.
• Use Python, MATLAB, or advanced Excel to process PQ data.
• Handling 95th percentile evaluations, event waveform assessments, and building trend reports that line up with IEC 61000 standards.
• Handle pre-connection PQ reviews and on-site testing for Battery Energy Storage Systems.
• Verify harmonics, fluctuations, and fault ride-through metrics to ensure everything is up to code (IEC 61000, IEEE 519, etc.).

Qualifications

• Bachelor’s degree or above in Electrical Engineering, High Voltage Technology, or a related field (A Master's degree is highly advantageous).
• 5+ years of hands-on professional experience in power quality analysis, large-scale data center power systems, or energy storage projects.
• Highly skilled in on-site operations, data acquisition, and troubleshooting using Fluke or equivalent professional power quality analyzers.
• Deep familiarity with international power quality regulations and standards, including IEC 61000-4-30, IEEE 519, and EN 50160.
• Strong statistical analysis and programming capabilities, with practical proficiency in data analysis tools such as Python, MATLAB, and advanced Excel functions.
• Proven track record in BESS integration, harmonic mitigation, or complex data center power projects (e.g., PCS inverter disturbance analysis, "PV + storage" optimization).
• Willingness and ability to travel internationally and domestically up to 50% of the time for on-site commissioning, testing, and project support.
• Holding an EMA Licensed Electrical Worker (LEW) certification in Singapore is a massive plus.

If you are interested in the position

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

To ensure the quality, functionality and reliability of a product before it released to the customer by identifying and diagnosing defects and issues

Key Responsibilities

• Setup new product & improve test strategies for existing products, to perform program test time reduction for capacity improvement & test yield improvement in production.
• Support QA team on analyze customer failure samples & provide countermeasure program for detect future similar failure slip through to customer.
• Provide training to technician group for smoothening daily repairing work.
• Troubleshooting test board/ tester if IC failure occur & provide permanent countermeasure.
• Ensure test station operation, performance, stability & robustness. Develop plans to investigate root cause of deviations.
• Have knowledge on ATE tester platform e.g Teradyne ETS-800, Advantest T2000, T3347, Fusion-CX & LTX tester

• To formulate maintenance plan for new equipment and machines based on inputs from station owners and suppliers.
• Perform troubleshooting based on troubleshooting guide from station owners and study on eliminating the problem from repeating.
• Liaise with station owners and machine suppliers on continuous improvement.
• To train, coach and develop technicians to handle test stations effectively in the area of troubleshooting and sustaining.
• To manage and ensure all manufacturing documents related to maintenance are being prepared and uploaded accordingly and promptly before release for manufacturing operations.
• To optimize and improve equipment reliability and design.
• To execute related activities to meet key performance indicators of department goals and drive for continuous improvement with realistic goal setting together with the team.
• To evaluate Test Technicians performance according to department and individual goals
• To summarize breakdown report and feedback to line support team for improvement (MTTR and MTBF).
• To execute any other related duties assigned by immediate superior from time to time.

We are seeking a Supplier Quality Engineer (SQE) with strong expertise in plastic injection tooling & molding processes. The ideal candidate will have hands-on experience in defining, optimizing, and validating molding parameters, reviewing and approving tooling designs, selecting appropriate resin materials, and diagnosing process-related defects. This role will work closely with suppliers to ensure robust, stable, and capable manufacturing processes from tool design through mass production.

Key Responsibilities

- Responsible for supplier quality plastic injection molded components from development through mass production
- Review, evaluate, and approve tooling design (mold design) together with Engineering team to ensure manufacturability, quality, and process robustness
- Collaborate with Engineering & suppliers on mold flow analysis, gate location, cooling layout, venting, and shrinkage considerations
- Evaluate and approve supplier injection molding processes, including parameter setup and process controls
- Determine and validate optimal molding parameters
- Lead root cause analysis and corrective actions for molding defects (e.g., sink marks, warpage, short shots, flash, burn marks, cracks, breakage)
- Assess and ensure correct resin material selection based on product requirements and application
- Conduct supplier audits focusing on molding process capability, tooling condition, and quality systems
- Drive continuous improvement initiatives with suppliers to enhance yield, reduce variation, and improve process stability
- Responsible for review and approve PPAP, FMEA, Control Plans, and SPC data from suppliers.

Technical Requirements

- Strong knowledge of plastic injection molding processes and tooling design principles
- Experience in tool design review , including:
  • Gate type and location selection
  • Runner system (hot runner / cold runner)
  • Cooling channel design and effectiveness
  • Venting and air traps
  • Ejection system design
  • Shrinkage and warpage considerations

- Deep understanding of critical process parameters:
  • Melt temperature, mold temperature
  • Injection speed and pressure
  • Holding/packing pressure and time
  • Cooling time and cycle optimization etc

- Ability to determine process windows and understand parameter variation impact
- Experience diagnosing molding defects and linking them to root causes
- Knowledge of resin materials (ABS, PC, PP, Nylon, etc.)
- Familiarity with scientific molding, decoupled molding, and/or DOE

Job Summary

Responsible for developing, executing, and optimizing test processes to verify product functionality and quality. Involves test setup, data analysis, failure analysis, and documentation to support process improvement and production efficiency

Key Responsibilities

• Investigate yield, quality, issues and implement improvements.
• Develop, optimize, and control manufacturing processes.
• Drive process improvements, defect reduction, and implement corrective actions
• Support test process documentation, and continuous improvement initiatives.
• Support production testing, analyze test data, identify failures, and implement corrective actions.
• Execute, and improve test procedures and systems.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Responsible for product development and high volume SSD manufacturing is desired.
• Perform manufacturing yield evaluation and data analysis for yield improvement.
• Responsible for prepare, validate and release test package to Agile system.
• Responsible for Failure Analysis of products to meet yield goals and quality targets.
• Interfaces with core team (FW/HW) as well as internal team to solve problems.
• Ability to work with various departments to facilitate the orderly execution of a proposed project plan.
• Participate & contribute in tester/infrastructure and process improvements.
• Ability to read the electrical schematic diagram is an advantage.
• Work closely with departments within the company to ensure product able to meet the delivery timeline.
• Ability to work independently with minimum supervision. 
• Ability to provide guidance to teammate.

Job Summary

Responsible for developing, executing, and optimizing test processes to verify product functionality and quality. Involves test setup, data analysis, failure analysis, and documentation to support process improvement and production efficiency

Key Responsibilities

• Investigate yield, quality, issues and implement improvements.
• Develop, optimize, and control manufacturing processes.
• Drive process improvements, defect reduction, and implement corrective actions
• Support test process documentation, and continuous improvement initiatives.
• Support production testing, analyze test data, identify failures, and implement corrective actions.
• Execute, and improve test procedures and systems.

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Maintain, improve, and develop QA/QC program as defined in the Company’s Quality Policy standard and control plan.
• Developing and implementing quality control systems, policies, procedures, specifications, forms, checklists, reports, etc., for services, incoming material, and factory assembly, testing and shipping.
• Lead on Quality incident 8D. Investigate quality problems by reviewing quality trends, tracking the root cause(s) of the problem(s), coordinating corrective actions, and implanting appropriate adjustments. Resolve inquires to satisfaction in a professional, timely manner, responding verbally and/or in writing.
• Implement preventive actions to reduce and/or prevent quality problems.
• Performs internal audits of the operation process using inspection results and statistical techniques to provide timely, accurate process and product analysis.
• Analysis audit results and determines proper corrective and preventive action.
• Defines and conducts both systematic/methodical and random/arbitrary tests to ensure proper Quality performance of products.
• Collaborating with operations and engineering team to develop and implement controls and improvements.
• Monitoring and analysing quality performance.
• New product capability, capacity set up, upgrade, troubleshooting and automation.
• Handle virtual factory synchronization standardization, harmonize best practice.
• Work with warehouse personnel to maintain incoming material and finish goods storage according to customer requirements with proper traceability.
• Develops and implements strategies to increase process quality performance through statistical methods and IR 4.0.

As a QA Engineer you will be supporting the development teams by ensuring the quality of their output through a combination of manual and automated testing.

Who we are

Trade Nation is a global CFD and spread betting broker. We help traders make better decisions through clear market insights, transparent pricing and fairer approach to trading.

Since 2014, we’ve grown into a market-leading, low-cost broker with our headquarters in London and offices across Europe, South Africa, Asia-Pacific, and key offshore regions including the Caribbean and Indian Ocean. Our platform is available in 14 languages, making it accessible to traders worldwide.

Built on transparency and trust, and driven by our people, our focus is simple: helping customers trade more effectively. We do that by keeping costs low, cutting unnecessary complexity and using technology to put traders first.

Your team

Our Kuala Lumpur office is a bright, modern space located at the heart of the city. The team here is expanding, making it our second-largest hub, and we’re excited to welcome like-minded individuals to join an exciting, collaborative environment filled with professionals who have a passion for innovation and driving change.

Our commitments to each other

We have each other’s backs

There when we need each other most

 We challenge each other

Be more creative, more curious, more bold

We thrive together

Taking our work to the next level

We form strong bonds

Through team building and social events

We don’t judge

Instead, we teach and are open to learning

We step up

Taking ownership and supporting each other to do the same

Key Responsibilities:

• Collaborating with cross functional teams to understand product features and architecture.
• Deriving meaningful test scenarios based on business requirements and system workflows.
• Performing functional, regression, integration and end-to-end testing on tasks and epics.
• Developing and maintaining an up-to-date regression pack to ensure ongoing testing of critical functionalities.
• Writing, executing, and maintaining test cases for automation.
• Assisting in bug reproduction, investigation and work with developers on root cause analysis.
• Maintaining test scripts to run in CI/CD environment.
• Promoting delivery of quality software.
• Communicating effectively on progress and ensure impediments are raised early to minimise impact on the delivery.

• Proven experience in quality assurance across automated and manual testing within software development with at least 3+ years of experience.
• Should have 2+ years’ experience in front-end, API and end-to-end testing.
• Develop and maintain automated scripts using tools like Playwright, Cypress, K6 and Postman.
• Strong preference for experience in scripting language such as TypeScript, JavaScript.
• Skilled in using CI/CD tooling such as GitLab, TeamCity etc
• Experience using Jira or similar project management tool.
• Maintain and enhance test documentation including test scenarios and bug reports.
• Excellent attention to detail, highly organised with a proactive and independent approach.
• Capable of working on multiple tasks simultaneously and managing deadlines.

Preferred Qualifications

• Relevant testing qualifications such as ISTQB, Agile software testing courses.
• Experience with Playwright using Typescript language.
• Experience in API testing using Postman or similar tools.
• Good to have knowledge in C#
• A positive attitude with the ability to work independently and as part of a team.
• Knowledge of Agile methodologies and experience working in an agile environment.

Lead the Quality Assurance process to ensure the achievement of quality compliances and customer satisfaction. Provide Quality Assurance support and coordinate in resolving potential issues.

Key Responsibilities

• Facilitate Customer Quality Issues and Internal Quality issues to drive Corrective & Preventive Actions.
• Facilitate Quality Planning Process [PFMEA, Control Plan, Measurement System Analysis, Quality Gate] for new process setup.
• Monitor Quality KPIs and coordinate Continuous Improvement activities.
• Analyze, compile, review Quality Metrics, and timely communication to stakeholders.
• Perform Quality Audits to ensure compliances, process effectiveness, and elimination of Quality Risks.
• Coordinate Change Control, RMA, SPC implementation and Quality Training activities 

To work on the following tasks with guidance:
1. To setup functional test system for product lines based on test specification (PAV) provided by PTE team
accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
•  Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FPY (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)
• Apply standardization in functional area to have lean process across projects.
• To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by PTE team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.
4. To support line for trouble shooting in test system.
5. General support on the following:

• To support operation on functional area performance in FPY, TFOR, OEE
• To analyze MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with PTE/CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

• Setup new product & improve test strategies for existing products, to perform program test time reduction for capacity improvement & test yield improvement in production.
• Support ME and QA team on analyze customer failure samples & provide countermeasure program for detect future similar failure slip through to customer.
• Provide training to technician group for smoothening daily repairing work.
• Troubleshooting test board/ tester if IC failure occur & provide permanent countermeasure.
• Ensure test station operation, performance, stability & robustness. Develop plans to investigate root cause of deviations.