Total 244 communications engineer job vacancies in F&B / Tourism / Hospitality category

Job Description: Lead Gearset & Planetary design for e-Axle transmission projects, including acquisition, customer, and innovation projects, ensuring “ON Spec, ON Time, ON Cost” Evaluate Transmission Endurance & Overload Requirement & develop Cost & Performance optimal solution Own concept to B/C/D Sample design release of gearsets and planetary gear trains for e-Axle transmissions, ensuring durability, NVH, efficiency and package compliance. Lead cross-functional integration for Gearset realization with FEA, Testing, Purchase, Supplier ,Quality and Manufacturing for B & C & D sample Perform Macro-geometry sizing (module, face width, helix, pressure angle) to meet vehicle targets and e-Axle duty cycles. Perform Micro-geometry design & profile optimization (crowning, lead correction) using MASTA/ROMAX/KISSsoft; LTCA and scuffing/pitting checks. Execute Shaft/spline design, fits and tolerances, bearing selection and gearbox stack-up.Planetary Gearset Design Responsibility Architecture selection: single-stage, compound, and double-pinion planetary sets; ratio planning and power flow definition. Perform Macro-geometry calculations for sun/planet/ring (module, teeth numbers, profile shifts) to meet ratio, efficiency and strength targets. Perform Micro-geometry and contact pattern optimization for load sharing across planets, planet phasing strategy and float considerations. Design Carrier (forged/cast) including struts/spiders, pin sizing, retention (press fit/shouldered/snap ring), and stiffness optimization. Design Bearing concepts for planet pins (needle/roller/bronze bush) with L10 life calculations and lubrication paths. Design Ring gear (machined/insert, integral housing ring), spline and bolted interfaces Efficiency modeling, churning loss estimation; lubrication selection (spray/splash/active) and oil flow features. Review and release 3D models and 2D drawings created in NX, ensuring compliance with design standards and Bosch guidelines. Develop, maintain, and continuously improve Gearset design guidelines, standards, and best practices. Mentor and guide external designers and ensure delivery targets for Quality, Cost, and Delivery (QCD). Required SkillsTools / Software Skills: KISSsoft MASTA UG-NX TeamcenterTechnical & Soft Skills: Strong know how of Gearset design with gear tribology, LTCA, bearing life, gear/lubrication standards ISO/DIN/AGMA. Solid manufacturing expertise on Hobbing, shaping, skiving, shaving, grinding, honing; heat treatment (carburizing, nitriding). Proven experience in optimizing Macro, Micro ,Shaft and Material Excellent communication and cross-functional coordination skills. Good working knowledge of FMEA, DRBFM, and systematic problem-solving methodologies. Competency in technical risk management.

Company Overview

Free Food for All is an IPC-registered food charity in Singapore dedicated to ending hunger by providing free, nutritious meals to vulnerable individuals and families regardless of race, religion, or nationality.

Job Summary

Support fundraising, partnerships, and communications to grow donor engagement and secure funding for Free Food for All’s mission to provide free meals to low-income individuals and families.

Responsibilities

• Research and identify grant opportunities from government bodies, foundations, and corporate sources to support fundraising goals
• Prepare and submit grant applications and funding proposals to secure financial support
• Track grant timelines, reporting requirements, and deliverables to ensure compliance and timely submissions
• Identify and reach out to potential corporate partners, sponsors, and donors to expand the organisation’s network
• Cultivate and maintain relationships with existing partners to strengthen ongoing support
• Support planning and execution of fundraising campaigns and events to increase donor engagement
• Craft compelling content for newsletters, social media, donor updates, and the website to communicate impact
• Develop materials such as presentations, brochures, and impact reports to support fundraising and awareness efforts
• Assist with internal and external communications that align with Free Food for All’s mission and voice
• Manage multiple tasks efficiently with strong organisational skills in a fast-paced, small team environment

Preferred competencies and qualifications

• Fresh graduate in Communications, Business, Social Sciences, or related field
• Prior internship or volunteer experience in non-profit, social service, or communications sectors
• Genuine passion for social causes and community work
• Strong written and verbal communication skills in English
• Self-starter attitude with ability to work independently and collaboratively

The Intern, Brand & Communications sits in the Brand, Communications and Sustainability team and will support the team in enhancing our brand and corporate communications efforts. This role offers hands-on experience in content creation, social media management, internal and external communications, and campaign execution. The intern will gain valuable exposure to corporate communications, public relations, and brand-building initiatives in a regional setting.

Responsibilities

Content creation & social media

• Assist in developing engaging content for social media platforms and websites
• Support the creation of visual assets such as graphics, videos, and infographics
• Monitor social media trends and contribute ideas for campaigns

Employee communications

• Assist in drafting internal communications such as company announcements, newsletter, and event invitations
• Help manage and update content on company intranet

Event & campaign support

• Support the planning and execution of company townhalls, webinars, and sponsorship activities
• Assist in coordinating with vendors and partners to ensure smooth event operations
• Provide logistical support, including catering arrangements and venue setup
• Maintain and update media contact lists to support media relations efforts

Research & performance tracking

• Conduct desktop research on industry trends, competitors, and communication best practices
• Track media coverage and compile reports on campaign performance

Requirements

• Currently pursuing or recently completed a diploma or degree in Communications, Public Relations, Marketing, Journalism, or a related field
• Strong writing, editing, and research skills with attention to detail
• Basic knowledge of social media platforms and content management tools
• Familiarity with design and video editing software (e.g., Canva, Adobe Suite) is a plus
• Experience with media monitoring tools such as Meltwater is an advantage
• Strong organisational and multitasking abilities, with the ability to work independently and as part of a team
• Proficiency in creating presentation materials
• Strong written and verbal communication skills
• Adaptable, fast learner, and team player with a proactive mindset
• Ability to manage stakeholders is a plus

As a Level 1 Trading and IT Support Engineer, you will be the first point of contact for technical assistance within the organisation and for our customers, with a focus on supporting the fast-paced trading floor environment. Your role will involve providing prompt and efficient support to end-users, resolving issues related to hardware, software, and network systems, and ensuring minimal downtime for trading operations.

Key Responsibilities:

• Respond to incoming technical requests or enquiries via phone or ticketing system
• Diagnose and resolve hardware, software, and network issues at a basic level
• Provide step-by-step guidance to end-users in troubleshooting and resolving technical problems
• Escalate complex issues to Level 2 support or other relevant teams as necessary
• Document, triage and track all support tickets, resolutions, and follow-up actions in the ticketing system
• Incident handling in terms of notification and updates to stakeholders as well as escalations within IT organization to resolve incidents
• Monitor the health of all systems and infrastructure
• Monitor and verify the successful completion of end-of-day data processing and reporting activities, addressing any issues that arise promptly
• Assist in setting up and configuring desktops, laptops, phones, trading terminals, printers, and other peripheral devices
• Administration of trading platforms
• Liaise with platform vendors for enhancements and upgrades
• Collaborate with IT team members to improve processes and enhance user experience
• Maintain a high level of customer satisfaction through effective communication and timely resolution of issues
• Any other ad-hoc responsibilities as assigned

Requirements:

• Diploma in Information Technology/ Degree in Computer Studies
• CompTIA A+ certification will be a plus point
• 3 years of experience in IT desktop support
• Experience supporting financial trading platforms such as FIS Valdi, Bloomberg terminals, CQG Desktop, TT Futures will be advantageous
• Proven experience in a helpdesk or customer support role is preferred
• Excellent problem-solving skills and attention to detail
• Strong interpersonal and communication skills
• Ability to work independently and as part of a team
• Willing to work on shift rotations and on public holidays

Interested applicants are invited to apply directly at the NUS Career Portal. Please note your application will only be processed if you apply via NUS Career Portal.

NUS Career Portal link: https://careers.nus.edu.sg/job/AI-&-Systems-Engineer/30378-en_GB/

We regret that only shortlisted candidates will be notified.

About the Role

We’re expanding our systems team at NUS Enterprise to build the backbone of our intelligent operations. As an AI & Systems Engineer, you’ll design and scale the systems that power our AI agents and data-driven workflows — from API integration to cloud architecture and data lake management.

We’re building our Enterprise Intelligence Hub and creating AI agents that automate the boring stuff — so our teams can focus on building what really matters.

If you love experimenting with new tools, designing scalable systems, and bringing automation ideas to life, we’d love to have you on board.

You’ll work closely with our AI and automation teams to connect platforms, manage real-time data flows, and build resilient infrastructure that enables smarter decision-making across NUS Enterprise.

What You'll Do

• Design and build APIs and connectors to integrate internal and external systems.
• Develop and maintain a data lake architecture that consolidates data across platforms for analytics, reporting, and AI training.
• Deploy and manage infrastructure on cloud environments (Azure preferred).
• Support the development of AI agents that automate workflows and leverage enterprise data.
• Build scalable backend services and pipelines to support intelligent automation.
• Troubleshoot and optimize system performance for reliability and efficiency.
• Collaborate with data, AI, and operations teams to identify new automation and integration opportunities.
• Up to 50% of your time will be spent working with vendors to support external projects involving startups. 

Qualifications

What You'll Bring

• 3–5 years of experience in systems engineering, backend development, or data integration.
• Strong hands-on experience with APIs (REST/GraphQL) and cloud architecture.
• Solid understanding of data management, ETL pipelines, and cloud data storage (Azure Data Lake, AWS S3, or equivalent).
• Proficiency in Python, Node.js, or similar programming languages.
• Experience with CI/CD tools, containerization (Docker), and version control (Git).
• Problem-solver mindset — you enjoy building, debugging, and scaling complex systems.
• A strong learning mindset — you’re eager to explore new tools, adapt quickly, and grow with evolving technologies.
• Passion for automation, AI systems, and emerging technologies.

Why Join Us?

You’ll be part of a lean, ambitious team shaping how NUS Enterprise connects data and intelligence. Whether you’re an experienced engineer or an emerging builder, if you’re driven by curiosity and the desire to keep learning, this is where you’ll thrive.

Send your resume to us. No cover letter required—but we’d love to know what drives you, and what you’re excited to build next.

Please be informed that only shortlisted candidates will be notified.

Communications & Content Specialist (1-Year Contract)

Location: Singapore (On-site / Various Concert Venues)

Employment Type: Full-Time

Eligibility: Singaporeans and Permanent Residents (PR) only

Role Overview

Showtecgroup is looking for a disciplined, assertive, and highly communicative Safety & Compliance Officer. This is not a desk-bound safety role, and you will operate on the "front lines" of concert set-ups and live event production. 

You will be the primary authority on-site for safety enforcement, ensuring that our technical crew, clients, and promoters operate within the highest standards of Workplace Safety and Health (WSH).

The ideal candidate will bridge the gap between technical execution and safety regulation, turning complex safety protocols into clear, actionable instructions for all stakeholders.

Key Responsibilities

• On-Site Safety Leadership: Lead all safety enforcement during concert load-ins, set-ups, and tear-downs. Be the dedicated personnel for all site-specific safety matters.

• Stakeholder Liaison: Act as the primary point of contact for safety briefings with internal crew, external promoters, and high-level clients. You must be able to explain technical safety processes in a way that allays client fears while maintaining authority.

• Workflow Discipline: Enforce strict "housekeeping" standards and operational discipline whilst maintaining rapport with our crew. Ensure that work areas are kept clear, hazards are mitigated in real-time, and crew members adhere to established workflows.

• Zone Management: Strictly manage and enforce "No-Fly Zones" and restricted areas during rigging and high-altitude work to ensure zero-harm environments.

• System Implementation: Develop, address, and implement robust safety systems and SOPs tailored to the unique challenges of the entertainment and events industry.

• Risk Assessment: Conduct and review Risk Assessments (RA) and Method Statements (MS) for every project, ensuring they are communicated effectively to the ground team.

Requirements

• Experience: Prior experience in Construction Safety or Heavy Industry safety is highly preferred, given the structural and rigging similarities to concert staging.

• Certifications: * Must be WSQ Certified in Workplace Safety & Health (Level B or higher).

• Possession of SCWWSH (Safety Coordinator) or Specialist Diploma in WSH is a significant advantage.

• Communication Skills: Exceptional verbal communication is a must. You should be comfortable addressing large groups, standing your ground during disputes, and translating complex regulations into layman's terms.

• Mindset: A "firm but fair" approach. You must be comfortable enforcing discipline in a fast-paced, high-stress environment without compromising professional relationships.

• Physicality: Ability to be on your feet for extended periods in various venue environments (Stadiums, Indoor Arenas, etc.).

Where you will work

You will be working at some of the biggest and best venues in Singapore, including:

• National Stadium (Kallang)

• Singapore Indoor Stadium

• The Star Theatre

• Singapore Expo

Why Join Showtecgroup?

This is a unique opportunity to apply rigorous construction-grade safety standards to the world of live entertainment. If you are a safety professional who thrives on the energy of live events and possesses the grit to enforce discipline in a dynamic environment, we want to hear from you.

To Apply:

Please submit your resume along with your WSH certifications and a brief cover letter detailing your experience with site enforcement to ignatius@showtecgroup.com.

Job Duties:

Communications & Content Development:

• Creative development and content production of strategic communication deliverables including memos, presentations and fact sheets for diverse internal and external audiences and special projects.
• Create engaging multimedia content, including videos, digital and social media assets to effectively convey key messages.
• Manage and update internal communication platforms (intranet, newsletters, memos).

Media Monitoring and Reporting:

• Support media relations, including proactive monitoring, analysis, and vendor management.

Event Management & Coordination:

• Coordinate and manage administrative tasks and logistics for senior visits, CCO town halls, global campaign activations etc.
• Oversee all aspects of event delivery, including creative design, content, logistics, and on-site management, working with partners and vendors where necessary.

Governance & Operations:

• Manage and ensure compliance with governance processes, including approvals and audit requirements.
• Maintain accurate records and support all reporting obligations (quarterly, ad-hoc).

Requirements:

• 2-4 years of working experience in a communications or content role with a multinational corporation, content or public relations agency, or journalism especially in digital or multimedia platforms.
• Fluent in English with outstanding written and verbal communication abilities.
• Understanding of traditional and social media landscapes, with proven ability to leverage these platforms for effective communication.
• Proven ability to manage multiple projects simultaneously from conception to delivery.
• Experience creating multimedia or digital communication assets using video/photo editing software e.g. Adobe Premiere Pro, Photoshop,Lumen5.

Interested applicants please send your resume in MS Words format and attention it to Tan Joanna (R1104661)

Short listed candidates will be notified

www.ambition.com.sg

EA Registration Number: R1104661

Data provided is for recruitment purposes only

Business Registration Number: 200611680D. Licence Number: 10C5117

Job Responsibilities:

·       Seated within Global Communications function and supports both Singapore and Global initiatives

·       Develop and produce strategic communication materials (e.g., memos, presentations, fact sheets) for internal and external audiences.

·       Create engaging multimedia content, including videos and digital/social media assets.

·       Manage and maintain internal communication platforms such as intranet, newsletters, and announcements.

·       Support media relations through monitoring, analysis, and vendor coordination, and prepare regular and ad-hoc reports.

·       Plan and coordinate logistics for senior leadership visits, town halls, and global campaigns.

·       Oversee end-to-end event execution, including content, creative direction, logistics, and on-site management, liaising with vendors and stakeholders.

·       Ensure compliance with governance processes, including approvals and audit requirements.

·       Maintain accurate documentation and support reporting obligations (quarterly and ad-hoc).

·       Adhoc tasks and projects as assigned

Job Requirements

·       Minimum Degree in a related discipline

·       Minimum 3years of relevant communications experience

·       Experience within the financial industry would be an added advantage

·       Able to start immediately or within short notice

Interested candidates, kindly email your detailed resumes in MS word format to joseph.koh@ambition.com.sg

Attention to Joseph Koh Wei Jie(R1873431)

Shortlisted candidates will be notified

www.ambition.com.sg

EA Registration Number: R1873431

Data provided is for recruitment purposes only

Business Registration Number:200611680D. License Number: 10C5117

Overview
We are looking for an Automation & AI Engineer to design, develop, and support intelligent automation solutions using RPA, low-code platforms, and AI technologies. This role involves building scalable workflows, integrating AI capabilities, and supporting end-to-end digital solutions.

• Working Hours: Mon-Fri
• Working Location: Central
• Salary Package: Up to $10,000 (basic) + AWS
• Job Type: Contract

Key Responsibilities

• Develop and maintain automation workflows using RPA and low-code tools
• Translate business requirements into efficient, scalable automation solutions
• Integrate AI/LLM capabilities (e.g. for document processing, summarisation, and decision support)
• Configure and integrate enterprise or government platforms into digital workflows
• Ensure system reliability through proper error handling, logging, and monitoring
• Collaborate with stakeholders to design user-friendly solutions and dashboards
• Provide ongoing support, troubleshooting, and enhancements for deployed solutions
• Maintain technical documentation and support lifecycle activities (upgrades, fixes, improvements)

Requirements

• Experience in RPA tools (e.g. UiPath, Power Automate)
• Basic knowledge of API integrations and system connectivity
• Familiarity with AI/LLM concepts and automation use cases
• At least 2 years of experience in software engineering or automation development
• Strong problem-solving and analytical skills
• Good communication and documentation abilities
• Ability to work independently and in a team

Nice to Have

• RPA or Power Platform certifications
• Experience with AI platforms (e.g. OpenAI, Azure, AWS)
• Exposure to enterprise or government projects
• Understanding of secure development or regulated environments

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy(scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data as it is not required at this application stage.

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Elane Yap Theng Yu- R1989397

ScienTec Consulting Pte Ltd - 11C5781

Responsibilities including but not limited to:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M&E drawings and follow up on drawing discrepancie
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants and suppliers on all project related matter

Requirements:

• PW2/PW4/Poly/Diploma/Degree in Electrical or any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/ Microsoft Office/ Microsoft Project)
• Fluent in English, both written & spoken
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

Responsibilities including but not limited to:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M&E drawings and follow up on drawing discrepancie
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants and suppliers on all project related matter

Requirements:

• PW2/PW4/Poly/Diploma/Degree in Electrical or any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/ Microsoft Office/ Microsoft Project)
• Fluent in English, both written & spoken
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

Responsibilities including but not limited to:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M&E drawings and follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants and suppliers on all project related matter

Requirements:

• PW2/PW4/Poly/Diploma/Degree in Electrical or any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/ Microsoft Office/ Microsoft Project)
• Fluent in English, both written & spoken
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines