Total 469 structural engineer job vacancies in Art / Design / Entertainment category

Key Responsibilities

• Design for Excellence: Lead comprehensive DFM/DFF/DFA/DFT reviews during NPI to identify and mitigate manufacturability, assembly (SMT/THT), and quality risks.
• Test & Reliability Strategy: Define and execute PCBA reliability testing, including HALT (Highly Accelerated Life Test) and HASS, to validate design margins and manufacturing robustness.
• Technical Troubleshooting: Analyze PCB fabrication processes and provide expert guidance for board-level troubleshooting, yield excursions, and build issues.
• Test Coverage Optimization: Assess test point accessibility and ICT/FCT coverage to ensure effective defect detection and optimal test strategies.
• Stakeholder & Vendor Collaboration: Interface with customers, PCB suppliers, and EMS partners to resolve design conflicts. Prepare structured DFM reports and drive the timely closure of technical issues.
• Continuous Improvement: Refine internal DFM rules, design checklists, and best practices to drive ongoing enhancements in production quality and reliability.

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, or related field.
• 5–8 years of hands-on experience in DFM / DFF / DFA / DFT for PCB & PCBA.
• Strong understanding of PCB fabrication processes, SMT / THT assembly processes and test strategies (ICT, FCT, boundary scan is a plus).
• PCBA reliability testing concepts (HALT, HASS, stress screening).
• Familiar with IPC standards: IPC-2221, IPC-7351, IPC-A-600, IPC-A-610, and related standards.
• Ability to read and interpret datasheets, schematics, PCB layouts, Gerber / ODB++ / fabrication and assembly data.
• Strong communication skills to clearly explain design risks, reliability concerns, and recommendations.
• Ability to work effectively in cross-functional and customer-facing environments.
• Experience in EMS or high-mix, low-volume manufacturing is a strong advantage.

Perform Layout Versus Schematic (LVS) checks to ensure consistency between schematic and layout designs

Identify, debug, and resolve LVS errors in collaboration with design and layout teams

Support physical verification processes including DRC (Design Rule Check) and ERC (Electrical Rule Check)

Work closely with layout and circuit design engineers to ensure design accuracy and manufacturability

Assist in improving LVS runsets, flows, and verification methodologies

Document verification results and report issues in a timely manner

Requirement:
Bachelor’s degree in Electrical Engineering, Electronics, or a related field

2 years of experience in semiconductor/IC design

Basic understanding of IC design flow and physical verification concepts

Familiarity with EDA tools such as Cadence (Virtuoso), Mentor Graphics (Calibre), or Synopsys tools

Strong analytical and problem-solving skills

Good communication skills and willingness to learn

EA:25C2690 R23115755

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Job Description

• Design and Develop ICs using leading EDA software; work on RTL to GDS, including synthesis, layout, floor planning, placement, clock tree insertion and routing.
• Responsible for GDS validation like DRC/LVS, timing closure sign-off, scan, validation etc.
• Design, implement and maintain synthesis, DFT and Static Timing Analysis scripts using best-in-class methodologies.
• Work closely with other groups like Analog Design, Systems, Applications and Production in determining architecture and specification of the products.

Job Requirements

• Bachelor/Masters Degree in Electronics/Electrical/Computer Engineering with 1 year or more experience
• Good experience and knowledge in design flow from Netlist to GDS, Synthesis, layout, Floor Planning, route , STA, CTS, RC Extraction and correlation
• Static timing analysis, power and noise analysis and back-end verification across multiple projects.
• Proficient with backend design EDA tools, Synopsys ICC2 preferred
• Successfully track records of taping out complex SOC
• Working knowledge of deep sub-micron routing issues as they relate to power and timing.
• Proficiency using Perl and TCL
• Self-motivated team worker, good verbal and written communication skills

Ethos Search Associates

EA Licence No: 13C6655
EA Reg No: R1109557 Rose

Job Descriptions

• Develop and Review Test Plan based on IC design specification
• Develop constrained-Random verification environment for complex DUT
• Develop/Modify Testbenches and test programmes using UVM-SV for Pre-Silicon IP/ICs/SOCs and ensure product meet their performance
• Implement coverage matrix using cover point and assertion
• Create and debug tests for DUT
• Resolve bugs with remote designers

Requirements

• Bachelor/Masters Degree in Electrical/Electronics/Computer Engineering with 1 year or more experience
• Hands-on experience in Silicon/ IP verification using SystemVerilog/ UVM
• Strong understanding of verification process from test plan to coverage completion
• Strong communication and Analytical skills
• Understanding of HDL (Verilog, VHDL)
• Experience in using leading EDA software tools like Cadence/ Synopsys

Ethos Search Associates Pte. Ltd.

EA Licence No: 13C6655
EA Reg No: R1109557 Rose

• Design and develop automation and semiconductor equipment modules, optimizing performance, yield, and manufacturability using Design of Experiments (DOE).
• Lead the product development lifecycle from concept, design, and prototyping through validation and transition to high-volume manufacturing.
• Collaborate with Engineering, Integration, Modules, and cross-functional teams to troubleshoot technical challenges and ensure alignment throughout project execution.
• Ensure designs are manufacturing-ready, supporting integration into production with a focus on scalability, reliability, and cost efficiency.
• Define performance metrics, monitor development progress, and prepare technical reports and documentation for continuous improvement.

Requirements:

• Degree in Mechanical/Mechatronics Engineering or equivalent
• At least 3 years of experience in automation or semiconductor equipment design, with knowledge of high-precision machine design.
• Proficient in 3D CAD software and capable of producing detailed mechanical drawings with GD&T understanding.
• Strong problem-solving skills with the ability to collaborate across teams and support manufacturing integration.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R26160345

Role: Power System Engineer [ Electronic Design ]

Working Day: 5 Days Work Week 8.30am to 6.15pm

Location : AMK@Link (Yio Chu Kang MRT)

Salary：$4,000 - $7,000

Entitled to AWS + Variable bonus both not listed in employment contract [ Not Mandatory ]

Requirement : 

1. Bachelor, Master or PhD degree in Electrical Engineering, specialized in Power Electronics

2. 2-5 years’ experience in the same industry and strong understanding of power electronics theory and applications.

3. Proficiency in circuit design and simulation tools. Experience with embedded systems and digital control of power converters.

Job Responsibilities:

• We are seeking skilled and innovative Power Electronics Engineers to design, develop, and test power electronic systems and components.

• The ideal candidate will have experience in power conversion technologies, circuit design, and system integration for applications such as AI data center server power supply, renewable energy systems, or industrial automation. 

• Design and develop power electronic converters including AC/DC, DC/DC such as Totem-pole PFC, T-type, Vienna Rectifier, LLC, Buck, Boost, SR, Flyback…

• Perform calculation, simulations and modelling using tools such as LTspice, PSIM, Mathcad and so on.

• Select and evaluate power components such as Si/SiC/GaN MOSFETs, IGBTs, capacitors, resistor, magnetics and so on.

• Develop control algorithms for power converters and implement them on embedded platforms.

• Conduct thermal and EMI/EMC test and analysis and ensure compliance with relevant standards.

• Collaborate with cross-functional teams including hardware, firmware, and mechanical engineers.

• Support prototyping, testing, and validation of power electronic systems. Document designs, test procedures, and report the test results.
  

Tai Jia Seng Reg No: R26159755

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Job Description

• Responsible to perform transistor level Static Timing Analysis (Synopsys Nanotime) for complex custom design and mixed signal circuit
• Responsible for developing timing models (NLDM, CCS and LVF) for advanced technology nodes mixed signal circuits and complex standard cells.
• Responsible for working with internal stakeholders to tune stop cell hierarchy level and to enable timing characterization.
• Responsible for developing and updating quality check utilities to ensure quality of timing models.
• Engage with various teams to understand new STA requirements.
• Maintenance of the timing model databases.
• Evaluate best in class EDA tools and flow in the industry.

Requirements

• Degree in Communications/Electronics/Electrical Engineering
• Usage of STA tools for timing analysis, characterization, library generation for Custom design or Mixed Signal Design.
• Have a solid understanding of MOSFET electrical characteristics and experience with transistor level circuit simulators, such as HSPICE and SPECTRE.
• Understanding of layout at the transistor level to effectively work with the mask design team
• Familiarity with reviewing DRC and LVS results an added plus.
• Understanding or an ability to learn a wide variety of industry standard modeling formats including Liberty (CCS, NLDM and LVF), Verilog, LEF, Milkyway, NDM, CLIB and SPICE.
• Familiar with working in Linux environment, load sharing concepts (such as LSF) and version control (such as ICM) an added plus
• Experience designing or a solid understanding of standard cell architectures, including state retaining elements like latches and flops is an advantage.

Ethos Search Associates - EA No: 13C6655
Rose - Reg No: R1109557

Company Overview

Founded in 1993 in Korea, SMS-SME operates from its global headquarters in Singapore. It is a leading supplier of marine cargo access and securing equipment, providing turnkey engineering, design, production, and installation services to shipyards, ship owners, and shipping companies worldwide.

Job Summary

Support mechanical engineering projects by preparing detailed CAD drawings, coordinating design requirements, and maintaining documentation to ensure timely and accurate project delivery.

Responsibilities

• Prepare and update detailed mechanical engineering drawings using AutoCAD or other CAD software to support design and project needs.
• Coordinate with internal teams to align design outputs with project requirements and meet established timelines.
• Provide engineering support during project execution to resolve technical issues and facilitate smooth operations
• Assist senior engineers in preparing mechanical designs and functional layouts to contribute to project development
• Perform engineering-related tasks as assigned by the engineering team to support overall project objectives

Preferred competencies and qualifications

• Diploma in Mechanical Engineering from a recognized Polytechnic.
• Basic knowledge of AutoCAD and SolidWorks software for design and drafting purposes.
• Basic understanding of mechanical engineering drawings and design concepts to support accurate work.
• Strong teamwork and communication skills to collaborate effectively within multidisciplinary teams.
• Responsible, detail-oriented, and eager to learn to continuously improve engineering capabilities.

Job Responsibilities

1. Participate in feature definitions of the leading-edge AI chips.
2. Participate in the microarchitecture design of AI chip SoC and the subsystems.
3. Participate in the front-end design and the implementation using HDLs.
4. Perform critical analysis and propose novel chip architectures for performance, power, and area improvement.
5. Cross-team collaboration with Software, DV, and Physical Design to meet performance, power, and area goals.
6. Write patents.

Job Qualification

1. Master's degree and above in Electrical & Electronic Engineering, or equivalent.
2. Knowledgeable in computer architecture, such as AI Accelerator, CPU, network-on-chip, memory hierarchy.
3. Familiar with hardware module development using HDLs.
4. Strong learning capability, good communication and collaboration skills.
5. Fresh graduates are also encouraged to apply.

Job Responsibilities :

1.    Participate in development of new products and product improvements with disciplined focus in product engineering design of connector solution.

2.    Design and develop quality product and ensuring manufacturability with other engineering functions involved in product development.

3.    Perform product design activity which includes translating customer requirements into product drawings and product specification, design analysis and verification, tolerance analysis, DFMEA, etc.

4.    Ensure product designs are validated per customer requirements, respecting international industry standards.

5.    Take Project Leadership role, define and reconcile technical DFM with Process Design team

6.    Responsible for product engineering of responsible product line; and be part of integrated team anticipating and resolving customer dissatisfaction.

7.    Improve product designs to bring about reduction in manufacturing cost.

Job Requirement:

1.    Bachelor / Master Degree in Mechanical Engineering, Manufacturing or other relevant discipline

2.    Minimum 5 years of product design development experience with excellent grasp of Engineering and Design principles.

3.    Experience in interconnects design industry is desirable. Senior/Staff position requires excellent design leadership skills and relevant product life-cycle knowledge.

4.    Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

5.    Familiar with CAD/CAE tool: Pro-Engineer CREO/ANSYS

6.    3D CAD modeling is a must

7.    Familiar with engineering drawing standards

8.    Working knowledge of connector application, plastic technology, insert-molding, stamping processes is preferred.

Working hours:

Mon to Fri, 8:15am to 5:30pm

Our esteemed client in the Construction industry is seeking an Design/ Coordination Engineer to join their dynamic team:

• Employment Type: Permanent
• Position: Design/ Coordination Engineer
• Location: Woodlands (Transport provided)
• Working Hours: Monday to Friday, Office Hours
• Salary Package: Up to $7,000 + Bonus

Job Responsibilities:

• Review, coordinate, and manage design drawings with consultants to ensure full compliance with all regulatory requirements.
• Analyse technical challenges, develop effective solutions, and oversee the planning, monitoring, and reporting of shop drawing production progress.
• Prepare and manage technical submissions for materials, construction methodologies, and Civil & Structural (C&S) shop drawings.
• Manage a team of BIM Modelers in the production of fully coordinated shop drawings and detailed construction plans.
• Resolve design and construction discrepancies by closely liaising with relevant team & regulatory bodies.

Job Requirements:

• At least a Bachelor’s Degree in Civil, Structural Engineering, or related discipline.
• Minimum of 2 years of relevant design and coordination experience with contractors.
• Registered PE with PEB.
• Proficiency in British & Singapore Design Standards.
• Experience with BIM coordination processes and software.

Ready to apply? Here’s how:

• Click the APPLY button, or
• Email your resume (in MS Word or PDF format) to adelin@intuitrecruitment.com. Include the job title in your email subject line for prompt processing.

Only shortlisted candidates will be notified.

By submitting your application, you consent to the collection and use of your personal data under Personal Data Protection Act (PDPA).

Adelin Chong | EA Personnel Reg No.: R1875641

Intuit Recruitment Pte Ltd | EA License No.: 25C2793

• Well Established Company
• Basic $ 2800 to $4300 + AWS + VB
• Working Location: Tuas, Singapore (Company Transport Provided at Bukit Batok; CCK & Boon Lay)
• Working Hours (Monday to Friday 8:15am to 5:45pm)
• TRAINING PROVIDED

Job Responsibilities:

• Prepare material requisition lists for job requirements.
• Plan and design electrical switchboards, consoles and control panels according to customer's requirements and company’s standards.
• Prepare approval drawings, shop drawings, final drawings / documents, short circuit calculations, instruction manuals as required for submission to clients and shop floor production.
• Co-ordinate with clients and consultants on the technical requirements. Attend technical discussions with clients and consultants when required.
• Feedback to Sales & Marketing Department on the changes of technical requirements by clients for claims of additional costs and time.
• Check and follow-up on design and shop drawings with production departments.
• Develop and improve on design of electrical switchboards, consoles and control panels. While taking note of quality, standard, cost-effective designs are to be considered.
• Assist and advise Sales & Marketing Department on technical matters, provide technical backup for securing of contracts.
• Carry out other responsibilities as and when assigned by the superiors.
• Follow the procedures of design control, documentation and data control, and quality system of the total Quality Management System 

Requirements:

• Diploma in Electrical Engineering or Marine Engineering
• Conversant with AutoCAD Electrical / Solidworks
• Training will be provided for candidate with lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

• A1 Main Contractor

• Competitive salary and bonuses.

• East / South

Our Client is a A1 Main Contractor handling Civil and Infrastructure projects. With increasing projects in the pipeline locally & overseas, they are seeking experienced and professional individuals to join their local team.

Responsibilities

• Lead and deliver civil & structural design for industrial/building/infrastructure projects
• Design reinforced concrete and steel structures, including precast systems and long-span trusses
• Perform and review structural analysis and calculations in accordance with relevant design codes (e.g. Eurocodes)
• Prepare and review design drawings, reports, and technical submissions
• Coordinate with architects, M&E engineers, process engineers, and QS teams to ensure integrated design delivery
• Support tender processes including preparation, evaluation, and technical clarifications
• Resolve site-related design issues and provide engineering solutions during construction
• Manage and coordinate authority submissions and approvals (e.g. BCA, LTA where applicable)

Requirements

• Degree in Civil Engineering
• Minimum 5 years of experience in civil & structural design
• Proven experience in industrial, building, or infrastructure (e.g. LTA/MRT/viaduct) projects
• Strong expertise in precast structures, steel design, and long-span structures
• Hands-on experience across piling, substructure, and superstructure design and coordination
• Proficient in structural design software such as ETABS, STAAD, SAFE, or equivalent
• Familiar with Eurocodes and local authority submission requirements (BCA/LTA)
• Strong coordination and stakeholder management skills

OTHER INFORMATION:

• Location: East / South

• Working days: 5 Days

• Salary : up to S$7,500 / Negotiable + VB (salary will commensurate according to experience & qualifications).

HW TO APPLY:

If you are a team player, meticulous & organized, and more importantly, believe that YOU CAN MAKE A DIFFERENCE, we would like to hear from you.

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: R1875905) by clicking the ‘Apply link’ /

or call your friendly Consultant, David, at 6590 9958 or 9271 7510 for a confidential discussion.

Please indicate the below information in your resume:

• Current & Expected Salary

• Reason(s) for leaving

• Notice Period / Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

NOTICE:

We would like to inform that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at https://www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resume provided to us does not contain your full NRIC number and full home address during your job application.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Design Engineer (Construction)
• Working Location: Tuas
• Working Hours: 5 days (Mon – Fri, 8.00am – 5.30pm)
• Salary Package: Basic salary up to $4,500 + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Carry out detailed analysis and design of civil and structural parts for various projects
• Work with other teams to develop effective and practical design solutions
• Prepare technical drawings, reports, and specifications to support project work
• Ensure all designs follow relevant codes, regulations, and safety standards
• Provide support on site during construction and help solve any issues that arise

APPLY NOW!!!

• Bachelor’s degree in Civil or Structural Engineering, or relevant discipline
• 5 years of experience in specialist building works
• Skilled in engineering design software such as ETABS, SAP2000, SAADPRO, and AutoCAD
• Knowledge of Singapore’s structural codes and regulations

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #76727 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781