Total 485 structural engineer job vacancies in Art / Design / Entertainment category

Responsibilities:

• Assist in designing micro-architecture for ISP and CV algorithms.
• Perform RTL design using Verilog/System Verilog and HLS tools (Catapult).
• Support the analysis of metrics related to power, performance, and area.
• Collaborate with architects and DV Engineers to ensure efficient verification signoff.
• Help with FPGA tasks, including emulation, validation, and debugging.

Qualification/ Requirements:

• Education: Minimum Master’s degree and above in Electrical/Electronics/Computer Engineering.
• Experience: Entry-level position; relevant coursework or project experience in ASIC design or image signal processing is a plus.

Technical Skills:

o Experience/knowledge in Verilog/SystemVerilog and C/C++.

o Familiarity with ASIC design processes and frontend design.

o Knowledge of image/vision/video data processing or algorithm acceleration is beneficial.

o Familiarity with scripting languages (Python, Perl, Tcl) is a plus.

Soft Skills: Strong teamwork and communication skills.

Additional Notes: Strong analytical skills and a willingness to learn and adapt in a dynamic environment.

We are looking for an experienced and self-driven Senior Design Engineer(Electrical) for one of our clients, a well-established and reputable leader in the industrial and engineering services sector. This person will specialize in the customized electrical design of diesel generator sets, synchronization systems, switchgear, and advanced control systems. You will be responsible for the full design lifecycle— from initial conceptualization and BOM creation to factory production support and site troubleshooting—ensuring seamless integration with industry equipment such as BMS and power protection systems.

Key Responsibilities

·       Design & Engineering: Develop comprehensive electrical drawings, accurate Bills of Materials (BOM), and technical documentation required for high-quality factory fabrication.

·       Standards & Compliance: Ensure all designs adhere to international ISO standards and specific regional regulatory requirements.

·       Production &Manufacturing Support: Collaborate closely with the manufacturing team to oversee electrical installations, ensuring a smooth production flow and resolving design issues on the factory floor.

·       Supply Chain Integration: Work with procurement to identify, engage, and qualify high-performance suppliers and components.

·       Sales & Tender Support: Partner with Industrial Solutions and Sales teams to interpret complex design requirements and provide technical expertise for timely tender submissions.

·       System Programming &Testing: Design and program various controllers, PLCs, and HMIs. Lead testing and validation phases, including parameter optimization for governors, AVRs, and PLCs.

·       Technical Support: Provide expert troubleshooting assistance both remotely and on-site to resolve critical system issues.

·       Continuous Improvement: Spearhead engineering projects aimed at cost reduction, workflow efficiency, and the implementation of process change management methodologies.

·       Mentorship: Lead and develop junior engineers by providing training and ensuring adherence to standardized engineering best practices.

Requirements

·       A Degree in Electrical Engineering with 7–8 years of relevant experience, or a Diploma in Electrical Engineering with 10–12 years of deep industry experience.

·       Advanced proficiency in SEE Electrical is mandatory.

·       Comprehensive knowledge of diesel generator controllers, alternator concepts, switchgear, and transformers is essential.

·       Strong background in PLC electrical design, HMI programming, and system integration.

·       Proven ability to manage process changes and a track record of mentoring technical teams.

·       Specific subject matter expertise in niche electrical power fields or advanced automation will be highly regarded.

To apply, please send your cv to talentagent@innergy-consulting.com.

We regret that only shortlisted candidates will be notified. Thank you for your understanding!

• Lead engineering teams to design and develop semiconductor equipment modules, ensuring integration into full machines through structured design reviews, comprehensive documentation, and thorough issue investigations.
• Implement Continuous Improvement Programs (CIP) to extend product lifecycle, enhance competitiveness, and improve gross margins, while ensuring reliability and feasibility through rigorous testing and verification.
• Support Sales by reviewing specifications, evaluating costing, and assisting in product assessments; respond to sales and service enquiries with accurate technical input.
• Ensure product performance on-site, resolve technical field issues across Sorters, Laser Mark, and Scan product families, and deliver effective solutions to maintain customer satisfaction.

Requirements:

• Degree or Master’s in Mechanical Engineering or equivalent.At least 5 years of experience in automation or semiconductor machine design.
• Strong technical background in high‑precision, high‑speed semiconductor equipment, with proficiency in Creo or SolidWorks.
• Proven leadership and project management skills, with the ability to coach, motivate, and solve problems systematically.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Job Responsibilities:

• Assist to verify and report the project requirements and specifications with the sales and customers for effective project planning to successful completion. (e.g., unit rate or lump sum projects);
• Assist to firm up the project scope of work so as to plan and optimise resource, workflow to fulfil the sales order requirements which include but not limited to:

− design management using computer added design (CAD) software;

− manage the submission sample and design for approval (e.g., owner, architect, consultant, etc.);

− oversee and accountable for bill of material (e.g., timeliness, correct specifications, etc.);

− Support Sales Business manager in timely quotation reply to customer;

• Execute the scope of project work as assigned or planned;  Prepare engineering drawings (e.g., shop-drawings, technical drawings, etc.) and purchase orders for production;
• Monitor and follow-up materials production schedule to meet the sales order requirements;
• Coordinate with Forwarders and liaising with Customers on deliveries arrangement to ensure timely delivery of project materials for on-site installation as per project’s contract schedule;
• Build rapport with project contractors, installers and facility owners for smooth project execution and hand-over;
• Attend site meeting for site progress coordination, problem-solving, variation orders, final account and decision-making leading to successful project completion;
• Manage warehouse planning methods, warehouse storage and layout plans which include but not limited to:

− Organize cargo handling schedules to ensure adequate warehouse space;

− Monitor storage utilization levels for various storage systems;

− Plan continuous improvement activities and performance improvement strategies.

Job Requirements:

• Engineering Knowledge is required, preferably in Electrical Engineering
• Good communication skills, fluent in both spoken English and Mandarin
• Formal education in Engineering
• Experience in related industry (e.g., electronic manufacturing, infrastructure, construction, offshore and marine, aerospace maintenance repair and overhaul, etc.)
• Excellent sales and negotiation skills
• Excellent problem-solving and decision-making skills
• Excellent people management skills
• Interpret engineering drawings (e.g., lighting, single-line diagram, schematic diagram, etc.)
• Use of office software applications

Responsibilities

• Design and implement digital logic for ASIC, AI, and CPU chip development using advanced process nodes to meet performance targets
• Develop and execute verification plans by performing simulation, debugging, and validating design functionality to ensure quality
• Implement design-for-testability (DFT) features to enhance chip test coverage and improve reliability
• Participate in RTL design, integration, and optimization to achieve performance, power, and area (PPA) goals
• Maintain and improve IC development environments, tool flows, and verification methodologies for efficient workflows
• Contribute to the development and optimization of in-house EDA tools and automation scripts to streamline design processes
• Collaborate effectively with cross-functional teams including architecture, physical design, and software to ensure successful tape-out

Preferred competencies and qualifications

• Knowledge of hardware description languages such as Verilog and SystemVerilog
• Exposure to ASIC/SoC design, AI chips, or high-performance computing environments

Requirements

• Bachelor’s degree or higher in Electrical Engineering, Computer Science, Microelectronics, Physics, or related fields
• Solid foundation in digital logic design and computer architecture demonstrated through academic or project work
• Familiarity with IC design flow including RTL design, simulation, and verification methodologies
• Strong analytical thinking and problem-solving skills applied in fast-paced learning environments
• Candidates with relevant academic background, including those at early stages of their career, are encouraged to apply.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Design Engineer (Construction)
• Working Location: Tuas
• Working Hours: 5 days (Mon – Fri, 8.00am – 5.30pm)
• Salary Package: Basic salary up to $4,500 + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Carry out detailed analysis and design of civil and structural parts for various projects
• Work with other teams to develop effective and practical design solutions
• Prepare technical drawings, reports, and specifications to support project work
• Ensure all designs follow relevant codes, regulations, and safety standards
• Provide support on site during construction and help solve any issues that arise

APPLY NOW!!!

• Bachelor’s degree in Civil or Structural Engineering, or relevant discipline
• 5 years of experience in specialist building works
• Skilled in engineering design software such as ETABS, SAP2000, SAADPRO, and AutoCAD
• Knowledge of Singapore’s structural codes and regulations

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #76727 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact win@hkmsvs.com for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Implement simulation models of AI SoC or subsystem designs.
• Perform computer architecture performance simulation.
• Analyse experimental data and perform architecture explorations.
• Identify bottlenecks in design and provide feedback on micro-architecture.
• Propose chip architecture optimizations for chip performance, power, and area improvement.
• Cross-team collaborations to deliver high quality chip products.
• Validate the correctness of the AI chip designs.

Qualification：

• Master’s degree or above in Electrical & Electronic Engineering, Computer Science, or a related field.
• Familiarity with computer architecture concepts, such as AI accelerators, CPUs, Network-on-Chip (NoC), and memory hierarchy.
• Proficiency in C/C++ programming.
• Experience with computer architecture simulation is preferred.
• Strong learning ability, with good communication and collaboration skills.
• Bilingual in English and Mandarin is an advantage to support cross-regional collaboration with Mandarin-speaking stakeholders.
• Fresh graduates with relevant project or internship experience are encouraged to apply.

Key Responsibilities Key Responsibilities

RTL Design and Verification

• Develop synthesizable RTL in Verilog/SystemVerilog for custom on-chip test, monitoring, and diagnostic IP targeting analog and mixed-signal failure detection.
• Design and verify digital logic blocks such as test controllers, sequencing logic, sensor/interface control logic, measurement and monitoring logic, data capture and comparison logic, and failure detection and reporting logic.
• Build clean register and bus-connected interfaces, for example APB, AHB, or AXI-lite based control and status paths, to enable firmware interaction and subsystem integration.
• Develop testbenches, assertions, checkers, and block or subsystem-level verification environments to validate controller behavior, detection logic, configuration programming, fault response, and status reporting.
• Plan and execute functional verification for normal, corner, negative, and fault-injection scenarios, with adequate coverage of critical diagnostic behaviors.
• Collaborate with analog and mixed-signal designers to create or use behavioral models, stubs, and interface abstractions for realistic verification of failure mechanisms and observability paths.
• Debug RTL and simulation issues through waveform analysis, assertion-based checks, root-cause investigation, and close interaction with integration and product teams.
• Ensure the RTL is modular, reusable, timing-aware, synthesis-friendly, and scalable for integration across multiple SoC derivatives.

SoC Integration

• Integrate custom DFT / diagnostic IP into SoC subsystems and system-level test architecture with proper consideration for clock/reset structure, interrupt handling, and status visibility.
• Work closely with SoC integration and DFT teams to ensure compatibility with system test infrastructure, production test flows, diagnostic mechanisms, and firmware control requirements.
• Support integration readiness by addressing CDC, reset interactions, timing considerations, low-power implications, and implementation handoff requirements.

Cross-Functional Collaboration

• Work closely with digital, analog, and mixed-signal design teams, DFT engineers, SoC architects, and product/test engineering teams throughout the design and validation cycle.
• Translate analog or mixed-signal failure modes into robust digital detection logic suitable for on-chip test, screening, and diagnosis.
• Contribute to technical discussions on architecture tradeoffs, observability strategy, and practical silicon debug readiness.

Required Qualifications

• Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field, with 5–7 years of relevant experience.
• Strong hands-on experience in RTL design using Verilog/SystemVerilog.
• Practical experience in RTL verification, simulation, and debugging methodologies.
• Solid understanding of ASIC / SoC design flow including coding, simulation, synthesis, and integration.
• Good foundation in digital design concepts such as FSM design, datapath design, bus protocols (AXI/AHB/APB), clock-domain handling, reset strategy, and timing considerations.
• Experience working in complex SoC environments with cross-functional teams.

Preferred Qualifications

• Experience developing control, monitoring, or diagnostic IP associated with analog or mixed-signal subsystems.
• Exposure to behavioral modeling or interface definition for analog and mixed-signal verification use cases.
• Familiarity with subsystem-level integration, production screening considerations, and silicon debug support.
• Working knowledge of scripting or automation for verification, regression, or design productivity is an advantage.

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Description:

• You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

• Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog
• Experience in ARM or RISC-V processor system
• Experience in embedded C and assembly code programming
• Experience in analysis of power, timing and area
• Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)
• Disciplined, quality-minded, and highly driven for excellence
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 8 years of relevant experience
• Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus
• Experience in system modelling and simulation using emulator and SystemC is a plus
• Experience in UVM verification methodology is a plus
• Passionate and strong in general programming is a plus

Our vision is to transform how the world uses information to enrich life for all.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

The role of a High Bandwidth Memory (HBM) System Engineer at Micron Technology, Inc. is pivotal in the introduction of Micron's HBM with our customers.  This role will empower customers through the utilization of High Bandwidth Memory (HBM) integrated with ground breaking 2.5D and 3D System in Package (SiP) solutions. This encompasses a comprehensive approach to system level testing, encompassing electrical, software, and system validation perspectives. The incumbent will spearhead the development of innovative test algorithms and plans, which includes the design and execution of robust system test infrastructure capabilities to ensure the highest standards of quality and performance.  Your strategic leadership will be crucial in synchronizing efforts across various teams to achieve a seamless and successful product launch with our customers.

Responsibilities:

Provide Technical Leadership and Direction

• Initiate collaborations with customers, Technology Development (TD), Testing, and Manufacturing teams in advance of silicon arrival

• Maintain responsibility for the successful customer launch of the product

• Great communication and presentation skills – ability to present to both internal leadership and customer forums

• Strong interpersonal skills with ability to convey sophisticated technical concepts to peers and customers

• Develop, diagnose, and validate HBM System testing programs and inhouse system solutions

• Assess and determine the necessary equipment and hardware for optimal system validation processes

• Lead the development of High-Performance Computing (HPC) and Artificial Intelligence (AI) software testing strategies to enhance product testing

• Strategically plan projects and manage resource allocation to adhere to established timelines and objectives

• Enhance efficiency, coverage, turnaround time of validation activities

• Provide guidance and ensure alignment with specific company-wide projects

Minimum Qualifications:

• BS or MS in Electrical or Computer Engineering or related field.

• 8+ years (BS) or 10+ years (MS) of relevant experience.

• Deep knowledge of DRAM operation, JEDEC specs, and HBM product family.

• Strong communication skills to convey complex technical concepts.

• Experience with scripting languages (Python, TCL, Perl).

• Proven innovation and problem-solving in high-performance memory development

• Good understanding of computer architecture, memory subsystems, and memory technologies

• Proven team leader – respect, integrity, positive demeanor

Preferred Qualifications:

• Understanding of system architectures and memory subsystems; Previous experience validating products with both hardware/firmware/software components

• Experience with bring-up and validation of ASIC/GPU with HBM memory subsystems

• Familiarity with industry-standard memory interfaces and protocols, such as LPDDR, DDR, HBM, GDDR, CXL, UCIe, and PCIe

• Excellent problem-solving and analytical skills

• A self-motivated, enthusiastic team player who enjoys working with others

• Good communication skills with the ability to convey complex technical concepts to other design and verification peers in verbal and written form

JOB DESCRIPTION

In this position, the individual thoroughly understands digital design specs of various IP blocks and SoC architecture definition

• Develop detailed module level and SoC level testplans for all the functional features, based on the design spec.

• Develop ASIC verification environment including all the respective components such as stimulus, checkers, assertions, monitors and scoreboards.

• Develop directed and constrain-random verification functional tests and simulate using EDA tools to verify functional spec is working

• Execute verification plans, including design bring-up, DV bring-up, regression enabling for all the features.

• Collaborate with digital design team to debug functional testcases and deliver functionally correct designs

The ideal individual must have proven ability to achieve results in a fast moving, dynamic environment

JOB REQUIREMENTS

· BSEE or MSEE, entry level

· Strong communication, analytical and documentation skills and ability to interface with other groups

· Strong VLSI functional verification experience, preferably with exposure to complex, high speed custom VLSI products

· Strong hardware functional verification language and Object-oriental language development skill. Prefer with SystemVerilog/ UVM experience

· Familiar with ASIC verification methodology, tools, and development flow

· Working experience or familiar with Ethernet L2/L3 switch/router, SOC, AMBA bus, high-speed IO (USB-2/3, PCIe gen2/3, SATA), Flash controller, or CPU peripherals

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact win@hkmsvs.com for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Position Overview:

• As a design verification engineer, you will be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

• Experience in UVM verification methodology
• Disciplined, quality-minded, and highly driven for excellence,
• Excellent team player and good communication skills
• MSEE/BSEE in Electrical Engineering or Computer Engineering, with 8 years of relevant experience, but are open to fresh graduates with outstanding results
• Candidates with relevant experiences would be offered as Staff or Sr. Staff, taking on higher responsibilities
• Experience in video processing and video analytics is a plus
• Passionate and strong in general programming is a plus