Total 3,098 technician job vacancies

Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team

QA/QC documentation of engineering deliverables

Liaison with clients, project managers, architects, contractors

Assist in resolving any technical problems faced during project design and/or construction stages

Any other required duties as required by the Project Team.

Minimum Qualifications/ Experience/Skills

Graduate in Electrical/Mechanical Engineering.

Advanced skills using company software

Proven ability to communicate well in written and verbal communications

Design thinking for product inventions and enhancements

Motivation and commitment to providing interpersonal customer service

Knowing and applying current industry standards and information

Soft skills including a positive attitude, flexibility and conflict resolution

The ability to solve problems creatively on time

Having up-to-date knowledge and technical skills

4 off days monthly, rest days depend on schedule. able to work long hours and late in evenings and weekends

Competitive salary 3k and above

Positive and nurturing working environment

Work location: co office area

Duration: permanent

Requirements

Qualifications - diploma or high school diploma

Work experience- at least one year working experience in related fields

Job type- full time

Required languages: English and able to communicate with mandarin speaking customers

If you have an interest in applying for this role, please WhatsApp me at 98198786 to apply. Only shortlisted candidates will be notified. Priority will be given to Singaporeans

Young hon Lim/ manager

Render private limited

EA licence no 15c7827

EA reg no R1550906

Key Responsibilities:

• Install, inspect, maintain, and repair electromechanical equipment and systems.
• Troubleshoot electrical, mechanical, hydraulic, and pneumatic faults.
• Perform preventive and corrective maintenance on machinery and production equipment.
• Read and interpret electrical schematics, wiring diagrams, mechanical drawings, and technical manuals.
• Test and calibrate equipment to ensure optimal performance and compliance with specifications.
• Replace or repair defective components such as motors, sensors, relays, drives, bearings, and control systems.
• Assist in the installation, commissioning, and upgrading of machinery and equipment.
• Monitor equipment performance and recommend improvements to enhance reliability and efficiency.
• Maintain accurate maintenance records, reports, and documentation.

• Follow workplace safety procedures and comply with relevant regulations and standards.
  

  
  Requirements

  - 1–3 years of experience in electromechanical maintenance,manufacturing, industrial automation, or related fields preferred.

  - Knowledge of electrical systems, motors, control panels,PLCs, sensors, and automation equipment.

  - Understanding of mechanical systems, hydraulics,pneumatics, and power transmission equipment.

  - Ability to read and interpret technical drawings andschematics.

  - Proficiency in using diagnostic and testing instrumentssuch as multimeters, clamp meters, and calibration

  tools.

  - Familiarity with preventive maintenance programs andtroubleshooting techniques.

  - Ability to stand, walk, bend, and perform physical tasksfor extended periods.

  - Exposure to machinery, noise, heat, and industrialenvironments.

  - Able to work under pressure and meet tight dealines, withflexibility to work extended hours when required

Job Summary:

We are seeking a hands-on and technically skilled Automation Technician to support the maintenance, troubleshooting, and optimization of automated systems within a fast-paced warehousing and logistics environment; Day/Night Shifts Available.

Responsibilities:
Equipment Maintenance & Troubleshooting:

• Perform preventive and corrective maintenance for warehouse automation equipment and systems.
• Troubleshoot and repair electrical, mechanical, pneumatic, and control system issues.
• Diagnose faults on conveyors, sorters, robotic systems, ASRS, automated guided vehicles (AGVs), barcode scanners, and related automation equipment.
• Respond promptly to equipment breakdowns to minimize operational downtime.
• Conduct routine inspections and equipment health checks.

Automation & Control Systems:

• Support PLC-controlled systems and basic automation programming adjustments.
• Monitor automation system performance and identify areas for process improvement.
• Assist engineers in automation upgrades, installations, testing, and commissioning activities.

Operational Support:

• Maintain accurate maintenance records, service reports, and spare parts inventory.
• Ensure all maintenance activities comply with workplace safety regulations and company SOPs.
• Recommend improvements to enhance equipment reliability and operational efficiency.
• Assist in root cause analysis for recurring equipment failures.
• Support continuous improvement and productivity enhancement initiatives.

Requirements:

• NITEC / Higher NITEC / Diploma in Mechatronics, Electrical Engineering, Mechanical Engineering, Automation, or related field.
• Minimum 1–3 years of experience in automation maintenance, warehouse automation, manufacturing, or logistics operations.
• Experience working with conveyors, PLC systems, robotics, ASRS, or automated material handling systems will be an advantage.
• Good communication and teamwork abilities.

Technician possess a good drafting experience in draft development ideally related to precision tooling, machinery or mechatronics assembly project realization, working collaboratively with cross functional teams internally and externally.

Technician understands basic physical & mechanical principles, various manufacturing processes and technologies particularly in moulding, stamping, machining, adhesive etc and engineering research & development through analysis, prototyping & testing.

A well-rounded mix of experimental, theoretical and drafting skills. Aptitude in hands-on prototype lab work, including but not limited to debug, test, assembly & measurement jig drafting; commission the company’s product, jigs and fixtures, customized semi and fully automatic machines or assemblies.

Solid experience in fundamentals of geometric symbols & dimensions

Tolerance stack creation and analysis

Proficiency in 3D and 2D CAD modelling with other tools such as PDM, PLM etc

Duties and Responsibilities

1) Apply engineering principles to draft, modify, reverse engineering and develop new products

2) Intuitive in mechanical movement, function and performance.

3) Responsible for precision tools, jigs & fixtures, mechanical drafting

4) Project coordination to meet customer expectations and product specifications

5) Manage drafting activities from planning phase to final acceptance

6) Maintain and perform proper documentation controls complying with ISO9001:2015

7) Attend customer feedback, issue of quality defects and modification improvement.

8) Check engineering drawing, material/ quantity are reported to the customer specific work requirements to all relevant manufacturing processes

9) 5.5 day work week

Job Requirements

• Requires a Bachelor’s degree or diploma in the field of manufacturing, mechanical or mechatronics engineering

• Minimum 5 years of relevant work experience

• Demonstrate operations and technical skills

• Good analytical, project management and machining techniques

• Good interpersonal and communication skill and coordination work

• Meticulous, Independent and possess good organizational skill & planning control abilities

Job Summary

You will inspect, maintain, troubleshoot, and repair construction equipment, including boom lifts and scissor lifts, as well as mechanical and electrical components to ensure safety and functionality. You will perform installations and maintenance at client sites, including working at height and handling physically demanding tasks.

Responsibilities

• Inspect construction equipment, including boom lifts and scissor lifts, to identify maintenance and repair needs for safe operation.
• Maintain and troubleshoot mechanical, hydraulic, and electrical components to ensure equipment reliability.
• Service, repair, and install mechanical and electrical parts to meet operational standards.
• Diagnose and repair faults in boom lifts, scissor lifts, and other access equipment.
• Conduct load testing and functional testing to verify equipment safety and compliance.
• Perform installations, repairs, and maintenance tasks at client sites to support project requirements.
• Work safely at height and complete physically demanding tasks to fulfill job duties.
• Handle ad-hoc technical duties as assigned to support team and project needs.

performing maintenance, repairs, and inspections on a building's systems and structure to ensure it is safe, functional, and well-kept

. Key duties include troubleshooting and repairing electrical, plumbing, and HVAC systems; performing carpentry, painting, and drywall work; and conducting preventative maintenance and safety checks. They often respond to tenant requests and may work with other technicians or supervise contractors.https://www.ziprecruiter.com/career/Building-Maintenance-Technician/What-Is-How-to-Becomehttps://ca.indeed.com/hire/job-description/building-maintenance-technician

Job Scope:

• Perform pulmonary function tests (e.g. spirometry, diffusion capacity, bronchial provocation) and allergy tests as required

• Ensure accurate documentation, preliminary reporting, and timely submission of results

• Maintain and calibrate laboratory equipment, ensuring all instruments are in good working condition

• Manage lab inventory, consumables, and ensure proper stock levels

• Coordinate with doctors, clinics, and wards on test scheduling and urgent requests

• Support daily lab operations and ensure smooth workflow

• Assist with patient registration, appointments, and handling enquiries

• Participate in quality improvement initiatives and maintain service standards

Job Requirements:

• Diploma in Biomedical Science / Biotechnology or equivalent

• Preferably with 2 to 3 years of relevant experience in a clinical or laboratory setting

• Comfortable working in a patient-facing environment, including paediatric cases

• Good communication, interpersonal, and organisational skills

• Proficient in basic computer applications

• Proactive, detail-oriented, and willing to learn

Interested applicants, kindly furnish us with your detailed resume in MS Words format and click "Apply Now" button OR email to Han••••••••••@jobstudio.com.sg

We regret to inform only shortlisted candidates will be notified. Applicants who do not possess necessary experience or qualification will still be considered on individual merits and may be contacted for other opportunities

“Jobstudio will not solicit any money, request to use your bank account for business or request you to transfer any monies to any parties, please be aware of scams impersonating Jobstudio and our employees, you may call our office directly at 64•••390 for verification. we will not be liable for loss arising from scams.”

JOBSTUDIO PTE LTD

EA License No: 10C4754

EA Personnel: Choong Yi Han

EA Personnel Reg No: R2196526

Job Description

• Adherence to the established company core values, operations and safety policies and procedures.
• Troubleshoot and take corrective action to ensure operating parameters are within Standard Operating Condition for the production of quality products.
• Perform routine patrol check, collect data and safety inspections on the Ultem Polymerization Process.
• Actively participate in EHSS activities including concern reporting, Safety Risk Assessment (SRA), EHSS committee meeting
• Assist in maintenance works and perform routine cleaning of process equipment such as heat exchanger and strainers.
• Maintain established 5S standard at workplace.
• Capture all the activities and adjustment made during shift in the logbook, and proper escalation for any unresolved operational variances.
• Follow up and follow through all TOI/TA/Interlock bypass according to plan/instruction.
• Manage and coordinate logistic and downstream production team for raw material handling, finish good management, and packaging.
• Participate drills and emergency response trainings to ensure high degree of readiness in response to any emergency situations.
• Conduct patrol checks in the plant and ensure all the process conditions are within SOC/QSOC. Complete daily functional area field log sheets, and daily reporting (logbook)
• Monitor DCS control consoles for process performance on a continuous basis, including process parameters, alarms, and provides feedback of corrective action and optimization to subject matter engineers.
• Monitor sample results from analytical laboratory and follow instructions to make adjustment from DCS console whenever necessary.
• Lead problem-solving within the team and generate quality/safety non-conformance report whenever necessary.
• Conduct on-the-job training for new hires or newly assigned area technicians and complete all required certification per master training plans.
• Lead & Deploy resources within shift teams during plant upset/emergency situations.
• Develop and update SOP, SRA and other training materials when needed.
• Identify opportunities and work with other teams to drive continuous improvement on EHSS, cost saving, quality and/or yield.
• Assign as change leader and raise MOC for production as required.
• Liaise with shift leaders, maintenance, engineering, and contractors to address the identified EHSS/Quality issue.
• Able to support Process Order Technical Completion.

Requirements

• Min. NITEC or Higher NITEC in Chemical Process / Mechanical Engineering with extensive years of working experience in Polymer and Chemical Plant Operations.
• Diploma or Bachelor degree in Chemical Process Technology / Mechanical Engineering or other equivalent.
• 2-3 years’ relevant work experience in Chemical Process Plant.
• Good knowledge and experience in PTW system and ERT training.
• In-depth knowledge in polymerization processing, fire vessel operation, and solid handling.
• Mechanical related working experience is a plus
• Knowledgeable about chemical process plant operation
• Knowledgeable in mechanical equipment
• Knowledgeable about emergency response practices
• Basic investigation skills to make right judgement in the continuous operational environment
• Basic knowledge in results trend analysis
• Working knowledge of office software.
• Good communication skills (both oral and written) and interpersonal skills.
• Capable of calm and clear communication under pressure
• Strong adherence to EHSS requirements
• Able to perform 12hrs rotating shift work.

Responsibilities:

• To work at distillation process plant to make sure distil spent waste material into product.
• To ensure distillation process plant operates in safe operation parameters.
• To ensure the safety of the transferring of the flammable material.
• To ensure close co-ordination with the Laboratory for waste/product sampling.
• To ensure the following up of the SOP.
• To co-ordinate closely with the Laboratory & resale team for the re-sell items.
• To ensure there is sufficient storage capacity, and the product safely stored and treated.
• To ensure the performance and efficiency of distillation process plant in terms of the recovery yield and utilities consumption.
• Startup/shut down operation of distillation process plant according to SOP.
• Record process data and report any deviations.
• Identify and rectify process upset and equipment malfunction timely.
• Work with engineering to resolve equipment issues and implement preventive measures.
• conduct routine inspections for leaks, spills, and safety hazards. Ensure safe handling of materials that are flammable.
• To participate training program to enhance chemical and safety knowledge.
• To cover the 5S and safety job for the department.

Requirements:

• Minimum NITEC/Diploma in Chemical Engineering, Biotechnology, or a related field.
• Proficient in basic computer applications (e.g., MS Office, email, internet research).
• Proficient in both written and spoken English.
• Able to perform overtime/shift work.

Remuneration:

• Basic salary: $1,900 – $2,700
• Entitled Overtime / Shift Allowances
• Working hours: Monday to Friday (8am – 5pm); Saturday (8am – 12pm) / Shift Work (Day: 8am – 8pm, Night: 8pm – 8am)
• Company Transport / Transport Allowance ($120) if candidate manages own transport
• Sign-on Bonus (Terms & Conditions apply)

Job Description

• Industry/ Organization Type: Manufacturing - Electronics
• Position Title: Manufacturing Technician/ Manufacturing Engineer
• Working Location: Tai Seng
• Working Hours: Monday to Friday (9am to 6pm)
• Salary Package: Basic + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Support daily operations of the through‑hole/DIP assembly line to meet output, quality, and safety targets.
• Set up, operate, and perform basic preventive maintenance on DIP equipment and fixtures.
• Conduct in‑process inspections and functional tests on assembled products.
• Troubleshoot process issues, escalate as needed, and recommend improvements.
• Meet production schedules while maintaining first‑pass yield and quality standards.
• Other ad-hoc duties which may be assigned.

APPLY NOW!!!

• Minimum ITE Nitec/Higher Nitec in Electrical/Electronic/Mechatronics/Manufacturing Technology.
• 1–3 years in electronics manufacturing.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #80442 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

• Location: Sembawang / Woodlands
• Monday - Friday: 8.30AM - 5.30PM

This organization specializes in precision cleaning, surface treatment, and contamination-controlled services for high-specification industrial components. Operating in cleanroom environments, it supports manufacturing sectors that require strict quality, safety, and reliability standards, ensuring components meet exacting customer and regulatory requirements.

Key Responsibilities

• Perform precision cleaning of parts using approved solvents (e.g. IPA), abrasive pads, and manual polishing methods

• Handle aluminum, stainless steel, and ceramic components at chemical wet bench areas

• Prepare sample kits, cleanroom packaging, and boxing of parts for shipment

• Conduct in-process inspections to ensure parts remain in good condition throughout cleaning

• Safely handle, use, and dispose of chemicals according to safety guidelines

• Mask parts accurately for bead-blasting and other specialized processes when required

• Update spreadsheets and basic records to track production and quality data

• Maintain strong 6S housekeeping standards and safe work practices at all times

• Support multitasking across workstations and assist with ad-hoc operational tasks

• Participate in quality, safety, and training programs, and promptly identify deviations from quality standards

Requirements

• Minimum Nitec
• Able to handle Chemical
• Open to Cleanroom environment

HOW TO APPLY:
Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Stafflink Services Pte Ltd
EA Licence No.: 04C4294
EA Personnel: Chua Xue Min (Joesefyn)
EA Personnel Reg. No.: R23113090

Job Description

• Industry/ Organization Type: Security Solutions Provider
• Position Title: Security System IT Technician
• Working Location: Islandwide (office at Woodlands)
• Working Hours: 5.5 days (Mon – Fri: 9am - 6pm, Sat: 9am – 1pm)
• Salary Package: Basic + OT
• Duration: Permanent

Key Responsibilities

• Install, manage, and troubleshoot security systems: Access Control, Intercom, CCTV, NAS, VMS, and related network equipment.
• Handle copper, fibre cabling, electrical work, and installation of data/power cables, conduits, and metal trunking.
• Support testing, commissioning, and regular maintenance of security systems.
• Carry out onsite troubleshooting.
• Provide technical support, training, and engineering assistance.
• Deliver equipment and samples to project sites when needed.
• Set up and design network solutions for security systems.
• Assist Project Managers and Engineers with other tasks as needed.
• Able to standby at night or over weekends when required.

APPLY NOW!!!

• ITE/Diploma/Degree in IT, Computer, Electrical, or Electronics Engineering.
• Minimum 2 years of experience with ELV systems such as Access Control, Intercom, and CCTV.
• Strong knowledge of computer networking and troubleshooting.
• Familiar with Microsoft Windows.
• Class 3A/3 driving license is an advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #78602 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Our client is a well-established MNC specializing in advanced semiconductor and manufacturing technology solutions. Due to their current expansion plan, they are looking for a Inprocess Quality Technician (3D Drawings) – Engineering to join their engineering team. They are located in the (North) – easily accessible.

Responsibilities for Inprocess Quality Technician (3D Drawings) :

• Conduct in-process quality inspections throughout various stages of production to ensure compliance with specifications.
• Monitor, record, and verify critical process parameters to maintain product quality and process consistency.
• Identify, document, and report non-conformities, supporting timely investigation and resolution of quality issues.
• Assist in root cause analysis and implementation of corrective and preventive actions (CAPA) for process deviations.
• Maintain accurate inspection records and quality documentation in accordance with ISO and GMP requirements.
• Collaborate with production and engineering teams to drive continuous quality improvement and ensure proper calibration of inspection equipment.

Requirements:

• Diploma or Certificate in Engineering, Manufacturing, Quality Assurance, or a related discipline.
• Candidates with 1–2 years of experience in quality control within precision machining or manufacturing environments are preferred; fresh graduates are welcome to apply.
• Able to read and interpret engineering drawings and perform quality inspections on precision components.
• Detail-oriented with basic knowledge of manufacturing processes and quality standards (e.g., ISO 9001, GMP).

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/CV.

We regret that only shortlisted candidates will be notified.

Email Address: jobs@recruitpedia.sg
EA License No: 19C9682
EA Personnel No: R22104769
EA Personnel Name: Ong Boon Kiet (Travys)

Job Summary

We are seeking a responsible and motivated Technician to join our engineering team, performing maintenance, troubleshooting, and repair of boiler systems and related equipment to ensure operational safety and reliability.

Responsibilities

• Perform preventive maintenance and servicing on boilers and related equipment to ensure optimal operation
• Conduct electrical troubleshooting, installation, and repair works on boiler systems and control panels
• Attend to breakdowns and service calls promptly to minimize downtime
• Interpret technical drawings and electrical schematics to guide maintenance and repair tasks
• Prepare detailed service reports and maintain accurate maintenance records
• Follow company safety procedures strictly during all maintenance and repair activities
• Communicate effectively in basic English to coordinate tasks and report issues

Preferred competencies and qualifications

• Relevant technical qualification in Engineering, Electrical, Mechanical, or related fields
• Knowledge of boiler systems and maintenance practices
• Experience working in the engineering industry

Anticimex is the modern pest control company. Through prevention, new technology and sustainable solutions, we meet the new demands for healthy environments, for both individuals and businesses.

Due to growth, we’re on the hunt for a highly ambitious Service Technician qualified in General Pest to join our team. As part of your role, you will be responsible for the below duties:

Job Responsibilities:

·        To report to clients and conduct pest inspections and services

·        Determining the kind of treatment required to eliminate a particular type of pest

·        Identify pest infestation & carry out appropriate treatments for complaint area

·        Applying suitable pesticides to infested areas by following the label instructions and complying with safety procedures

·        Prepare daily reports, including records of equipment usage, work schedules and pest control operations performed

·        To maintain operation readiness for equipment and inventory

·        Supervise workers/ technicians for work schedules and responding to customers requests for various pest control services.

What we’re looking for:

Service Technician

·        Experience in pest control industry

·        Valid Class 3 / 3A License, NEA Full License

·        Positive and customer focused attitude

Benefits:

•          Basic Salary $3,200 -$5,000

•          Company vehicle + phone provided

•          Additional incentives

•          Commission on upsell opportunities you identify while at client sites

•          Opportunity for career progression, training, and development

If you would like to know more, apply today as we’d love to hear from you!