Total 15,617 process improvement manager job vacancies

Job Responsibilities:

• Develop, validate, and maintain special process procedures (e.g., heat treatment, surface treatment, coatings, welding, brazing)
• Perform process capability studies and continuous improvement initiatives
• Ensure compliance with aerospace standards and customer requirements
• Assist the Manager in day-to-day process monitoring and production requirement
• Perform other duties and responsibilities, as assigned

Job Requirements:

• Minimum 3 years of relevant experience in an Aerospace or Manufacturing environment

Interestedapplicants can send their detailed resumes to janelui@recruitexpress.com.sgor call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg.No. 199601303W || EA Licence No. 99C4599

Join a world-leading US-based data storage technology company in a high-tech manufacturing environment. You will support backend assembly processes, ensuring smooth production performance, quality, and continuous improvement activities.

Position: Test Process Technician

Employment Type: Permanent Role

Location: Woodlands

Working Hours: Shift-Based (Permanent Night Shift)

Role summary:

•Support backend assembly/test processes by monitoring yield, test time, scrap, and key process indicators.

•Perform root cause analysis, failure analysis, and drive process improvement.

•Support test process documentation, work instructions, PFMEA, and control plans.

•Work closely with engineering, equipment, and automation teams on optimization and issue resolution.

Key requirements:

•Diploma in Engineering or related discipline.

•Experience in manufacturing/process environments preferred.

•Fresh graduates are welcome to apply. Candidates with relevant experience will have an added advantage

•Exposure to process setup, process control, or failure analysis is an advantage.

•Knowledge of Python, C/C++, or SQL is a plus.

**Interested candidates, kindly email updated resume to sandra@wancomanpower.com with Subject of "Test Process Technician", thank you.**

Role Summary

The DMTS is a recognized expert inside and outside Micron, shaping the technical vision for cell film processes with influence across top-level organizational boundaries, leading programs spanning the engineering group, driving breakthroughs, influencing industry/cross-disciplinary teams, and mentoring senior technical leaders to guide critical roadmap decisions. Owns and updates the cell film process technology roadmap; drives external collaborations and benchmarking; prepares high-impact technical deliverables (presentations/white papers/patent filings); guides investment and prioritization decisions.

Main Responsibilities

• Serve as the CMP technical authority for NAND technology development, defining long‑term technology and equipment strategies

• Architect and drive next‑generation CMP process innovation, including FOAK developments, recipe architecture, and integration alignment

• Lead resolution of the most complex yield, defectivity, and integration challenges through deep CMP process, materials, and layout expertise

• Define and execute CMP hardware and supplier roadmaps, translating industry benchmarking and external insights into internal advantage

• Provide forward‑looking technical leadership, identifying scaling risks early and driving proactive mitigation strategies

• Drive cross‑functional execution across Technology Development, Process Integration, Manufacturing, and Equipment teams

• Mentor senior engineers and strengthen CMP technical capability across the organization

• Represent Micron CMP in cross‑site and external technical forums, and communicate technology roadmaps to senior leadership

<>·

Other Responsibilities

• Prepare high-impact technical presentations, white papers, and patent filings; initiate strategic collaborations with external partners (universities/research institutes).

• Integrates AI assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and complying with organizational standards and legal requirements.

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI enabled enhancements within one’s scope of work.

Candidate Profile

Minimum Qualifications / Experience

• PhD ≥15 yrs, or Master’s ≥17 yrs, of relevant experience in
  Electrical Engineering, Materials Science, Chemical Engineering, Physics, or related field,

• Experience in CMP process development within an R&D environment (NAND, DRAM, or Logic), including proven transfer to manufacturing

• Publications/patents and strong record of technical contributions.

Must-Have Technical Skills

• Deep expertise in CMP fundamentals, including pad–slurry–wafer interactions, mechanistic slurry chemistry, and pattern density/layout effects

• Broad understanding of multiple CMP process types, including metal, dielectric, barrier/hardmask, and poly‑Si/Si CMP

• Extensive hands‑on experience with advanced 300 mm CMP OEM platforms, including driving hardware roadmap decisions to improve capability, throughput, and cost efficiency

• Strong command of statistical process control (SPC), data analysis, and process qualification methodologies

• Proven ability to lead supplier technical reviews and head‑to‑head evaluations to advance CMP capability

Must-Have Soft Skills

• Demonstrated technical leadership in complex problem solving, including experience leading high‑impact technical programs or projects

• Ability to independently drive execution and influence cross‑functional teams across process, integration, equipment, and manufacturing organizations

• Strong analytical and structured thinking, with disciplined, data‑driven decision making

• Clear and effective technical communication skills, including executive‑level updates and stakeholder engagement

Embody Micron’s core values:

• People – Respect, develop and empower others

• Innovation – Drive continuous improvement and breakthrough thinking

• Tenacity – Show grit and determination

• Collaboration – Build trust and foster teamwork

• Customer Focus – Deliver excellence and value

• Study and evaluate new method and materials to improve current process and manufacturing capability.
• Conduct DOE to determine the key process parameters and product characteristic.
• Assist production in setting up machine operation procedure and safety guidelines.
• Implement new process.
• Explore possibility of reducing material standard usage or cheaper source.
• Determine the root cause for sample rejection for process related issue.

Requirements:

• Degree in Mechanical/Electrical/Electronics Engineering or equivalent.
• Diploma with 2 to 3 years working experience.
• Good troubleshooting and analytical skills.
• Independent, creative, resourceful and able to take pressure.
• Good communication, report writing and presentation skills.

12 hours shift work week

Loyang Area

Electronics Manufacturing Industry

Interested candidates, please forward a detailed resume and email to audris@alignrecruitment.com.sg

Align Recruitment Pte Ltd

License No: 20C0253

Attention: Pan Hong (Reg No. R2094728)

Role Summary

As a Senior Member of Technical Staff (SMTS), you are a module‑level CMP technical authority, responsible for defining CMP technical direction, leading FOAK developments, and driving cross‑functional execution across NAND nodes. As a SMTS (Senior Member of Technical Staff), you will be a part of revolutionary Next Generation NAND research & development CMP team driving Advanced NAND and CMP technology forward. The position promises ample opportunities for innovation, collaboration and testing a new dimension and scaling with Next Generation NAND. A SMTS CMP Engineer is a senior individual contributor responsible for defining, developing, and transferring advanced CMP processes for Micron NAND technologies. You will work directly with process integration and other process areas such as Wet Etch, CVD, Diffusion, Metals, Lithography & Dry Etch. You will work on state of the art and best in class CMP chambers & own the process roadmap to meet program and yield goals.

Main Responsibilities

• Own and lead key NAND CMP process modules, translating technology challenges into executable roadmaps across current and future nodes

• Drive cross‑functional execution across Technology Development, Process Integration, Manufacturing, and Equipment teams

• Lead FOAK CMP process development, including recipe architecture, control strategies, and integration alignment

• Ensure process robustness and manufacturability through run‑to‑run controls, SPC, qualification execution, and risk mitigation

• Resolve complex yield, defectivity, and integration issues using model‑based and data‑driven problem solving

• Define and execute process‑level hardware strategies in collaboration with equipment suppliers

• Act as a CMP technical leader, mentoring engineers, influencing adjacent process roadmaps, and communicating technology status and plans to senior stakeholders

<>·

Other Responsibilities

• Mentor engineers through structured development; build SME pipelines; publish internal papers/BKMs and present to senior leadership; uphold Micron’s technical leadership expectations

• Integrates AI assisted tools and insights into daily work to improve efficiency, quality, or effectiveness, exercising sound judgment and complying with organizational standards and legal requirements.

• Contributes to a culture of continuous improvement by identifying, testing, and sharing AI enabled enhancements within one’s scope of work.

Candidate Profile

Minimum Qualifications / Experience

• PhD ≥12 yrs, or Master’s ≥15 yrs, of relevant experience in
  Electrical Engineering, Materials Science, Chemical Engineering, Physics, or related field,

• Experience in CMP Process Development

• Deep expertise in CMP chemistry, physics, and integration

• Publications/patents and strong record of technical contributions.

Must-Have Technical Skills

• In‑depth expertise in CMP fundamentals, including pad–slurry–wafer interactions, slurry chemistry at a mechanistic level, and pattern density/layout effects

• Strong understanding of multiple CMP process types (e.g., metal, dielectric, barrier/hardmask, poly‑Si/Si CMP)

• Extensive hands‑on experience with advanced 300 mm CMP OEM platforms, including driving hardware capability, throughput, and cost improvements

• Proven expertise in statistical process control (SPC), data analysis, and qualification methodologies

• Ability to independently drive complex technical execution, resolve yield and defectivity issues, and influence cross‑functional teams

Must-Have Soft Skills

• Demonstrated technical leadership in problem solving, with experience leading complex or multi‑disciplinary technical projects

• Strong ability to influence without authority across process integration, equipment, and manufacturing teams

• Clear and structured technical communication skills, including written documentation and stakeholder updates

• Strong analytical mindset with disciplined, data‑driven decision making

Embody Micron’s core values:

• People – Respect, develop and empower others

• Innovation – Drive continuous improvement and breakthrough thinking

• Tenacity – Show grit and determination

• Collaboration – Build trust and foster teamwork

• Customer Focus – Deliver excellence and value

Job Responsibilities:

• Develop, validate, and maintain special process procedures (e.g., heat treatment, surface treatment, coatings, welding, brazing)
• Perform process capability studies and continuous improvement initiatives
• Ensure compliance with aerospace standards and customer requirements
• Assist the Manager in day-to-day process monitoring and production requirement
• Perform other duties and responsibilities, as assigned

Job Requirements:

• Minimum 3 years of relevant experience in an Aerospace or Manufacturing environment

Interestedapplicants can send their detailed resumes to janelui@recruitexpress.com.sgor call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg.No. 199601303W || EA Licence No. 99C4599

Key Responsibilities:

• Lead the architecture design (e.g. memory cells, select transistors, and peripheral devices), process integration, electrical characterization, modeling and simulation, failure analysis for 3D NAND devices.
• Design and execute DoE, analyze the impact of process variations on device performance and reliability (such as durability and data retention), and propose improvement solutions.
• Collaborate with the process development team to assess new device architectures, driving technology iteration.
• Write detailed technical reports and support customers or internal teams in resolving related technical issues.

Required Qualifications:

1. Education: Master's degree or above
2. Major: Microelectronics, physics, material science & engineering, chemistry;
3. Other Requirements:

• 8+ years of semiconductor device work experience, 3+ years of 3D NAND work experience.
• In-depth knowledge of 3D NAND device physics, familiar with its principles, failure modes, and reliability mechanisms.
• Troubleshooting, and problem-solving capabilities, with experience in successfully improving device performance or yield.
• Familiar with advanced semiconductor manufacturing processes and integration flows.
• Strong cross-team communication and collaboration skills.

• Well Established Company
• Basic $3000 - $3500 + AWS + VB
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• To act as the primary contact person for liaising and coordinating with internal and external parties ensuring project requirements at customer site are complied
• Lead a team of professionals through all phases of project development, implementation and completion
• Oversees daily project operation, logistics arrangements, and customer’s arrangement
• Project site management and coordination
• Assist in preparing and updating project administration documents, timelines, meeting notes, external contractor briefing notes and status report
• Work closely with customer site operations to understand their requirements and seek clarifications if needed
• To participate in contractor meetings as and when required by customer
• Assist the Manager to manage customer care program. To monitor customer satisfaction, complaints, changes in customer’s people, equipment, processes, materials used and business strategies
• To ensure all ISD personnel and sub-contractors adhere to the safety, Environmental and Health policies and requirements. Review the ISD personnel and sub-contractor work activity and review their JSRA
• Other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Mechanical, Operations, Engineering, or equivalent
• Possessed Minimum Class 3/3A license
• Safety Orientations Course (Working in Power Plant and Construction)
• Supervise Work at Height Course (preferred)
• Candidates with high pressure hydro jetting experience will be an advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Industry/ Organization Type: Waste Management & Materials Recovery
• Position Title: R&D Engineer (Waste & Process Development)
• Working Location: Tuas (Company transportation provided)
• Working Hours: 5 days (Monday – Friday, 8:00 AM – 5:00 PM)
• Salary Package: Basic Salary + AWS + Retention Bonus + Incentive + Transport Allowance
• Duration: Permanent Role

Key Responsibilities

• Develop, evaluate, and optimize waste treatment, handling, and recovery processes to ensure technical feasibility, cost efficiency, and sustainability.
• Collaborate with Sales, Marketing, and Operations teams to understand waste sources, identify opportunities, support project development, and execute pilot trials.
• Identify, assess, and implement new technologies and solutions, including working with external partners such as universities, research institutes, and technology providers.
• Establish and enhance laboratory capabilities, including process development and analytical methods to support R&D and operational needs.
• Drive continuous improvement by optimizing existing processes and introducing alternative treatment methods where appropriate.
• Ensure compliance with company procedures, documentation standards, and safety, health, and environmental requirements while maintaining proper laboratory practices.
• Support the development of handling solutions for complex or high-value waste streams and contribute to business growth through new initiatives and facility planning.
• Stay updated on industry trends and emerging technologies and proactively introduce relevant innovations.
• Perform other ad-hoc duties as assigned.

APPLY NOW!!!

• PhD in Chemistry or Chemical Engineering with at least 5 years of relevant experience in areas such as specialty chemicals, oil & gas, or water treatment
• Strong problem-solving skills and ability to work both independently and in a team
• Good analytical and communication skills
• Ability to perform visual inspection and distinguish colour variations in laboratory or process work

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #83634 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

About VSMC:

VisionPower Semiconductor Manufacturing Company Pte Ltd(VSMC), a joint venture between Vanguard International Semiconductor Corporation (VIS) and NXP Semiconductors (NXP) has started construction on a 300mm wafer manufacturing facility in Singapore, targets automotive, industrial, consumer, and mobile end markets.

Role Summary:

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the specific module (Diffusion, Etch (Dry &WET), Photolithography, Metrology, Physical Vapor Deposition, Thin Film -Chemical Vapor Deposition or Chemical Mechanical Planarization).

Key Responsibilities

• Monitor and sustain production process, assist in running and verifying process recipes on respective module tools.
• Work closely with process engineers to monitor manufacturing processes to scale up capacity swiftly and maintain with quality and urgency.
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards.
• Assist to conduct experiments, analyse complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Support to analyze production anomalies and maintaining/improving statistical process control (SPC) methods to establish and uphold robust manufacturing processes.
• Operate under rotating shifts (day/night), including weekends and holidays, in a 24/7 fab environment.

Education Qualification & Essential Experiences

• Diploma’s or higher degree in Electrical and Electronics Engineering, Chemical  Engineering or STEM related fields
• Minimum of 2 years of experience as an Process Associate Engineer.
• Experience in a 12’’ (300mm) fab environment is highly preferred.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background.
• Strong analytical and problem-solving skills to achieve positive results and outcome.
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment.
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs.
• Strong attention to details, hands-on attitude, and willingness to work in shifts if required.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Job Description

• Manage a cost effective manufacturing process procedure in wafer fabrication, through the provision of engineering support to the production line, so as to achieve organization's targeted manufacturing index.
• Take full ownership on all engineering issues of assigned process.
• Maintain and support day to day manufacturing activities through real-time problem analysis and real-time solution implementation.
• Ensure smooth process flow with high quality, high yield, low cost by working with the Maintenance Specialists, Production Supervisors and Shift Engineers to achieve overall committed targets.
• Provide cross functional/cross-dept/cross-fab support & coverage based on need & priority.
• Training of new Engineers & imparting technical knowledge to them.

You will gain Technical Skills and Competencies on: -

• Wafer fabrication technology
• Fab general safety and mandatory risk assessments
• Advance semiconductor wafer process 
• Wafer handling system
• Particulate control and prevention
• SPC, FDC application for drift detection and inline prevention
• Process robustness program and improvisation 
• Innovative solutions to manufacturing quality and equipment uptime improvement

Requirements

• A Bachelor’s Degree in, Electronics and Data, Chemical, Electrical Power Engineering, etc.  
• Ability to learn new concept and have good analytical skills
• Ability to work in a fast pace environment and able to multi-task
• Self-driven and independent with an inquisitive mind
• Able to document projects and create workspace for continuity and improvement
• Ability to learn new concept and have good analytical skills.
• Ability to work in a fast pace environment and able to multi-task.
• Able to lead and participate in cross functional problem-solving teams and with good interpersonal skills.
• Self-driven and independent with an inquisitive mind.

About our group:

The team is responsible for Drive Backend Assembly processes, including monitoring, controlling, maintaining, and improving product performance. This role applies engineering principles—such as Six Sigma and Lean—together with strong skills in data analysis, problem solving, and solution implementation to achieve performance metrics aligned with company goals.

About the role - you will:

• Sustain critical backend manufacturing processes—monitor daily yield, Test time, scrap, and key process indicators.
• Use programming and scripting capabilities such as Python, C, or C++ and SQL for automated testing, control and scripting, data crunching.
• Perform structured root cause analysis (5 Why, Fishbone, DMAIC) to resolve process excursions and chronic issues.
• Develop and release Test Process Documentation, work instructions, PFMEA, and control plans aligned with Seagate’s quality system.
• Capability to analyze test data, perform failure analysis, and trace defects back to the root cause.
• Partner with equipment and automation teams to drive process equipment optimization, recipe refinement, and failure mode analysis/reduction.
• Collaborate closely with engineers to achieve aggressive goals while upholding high-quality standards.
• Lead or participate in continuous improvement projects aimed at enhancing production efficiency in a consistent and sustainable manner. 
• Perform additional tasks and responsibilities as assigned to support team, department, and company Objectives and Key Results (OKRs)

About you:

• Diploma in Engineering or a related discipline.
• Strong analytical and problem-solving skills. 
• Able to work well under pressure and meet deadlines. 
• Positive, adaptable, and open-minded team player.

Your experience includes:

• Experience in manufacturing process environments is preferred.
• Exposure to process setup, buyoff, process mapping, and process control. 
• Experience in failure analysis is preferred.
• Strong data querying, analytical, and troubleshooting capabilities. 
• Working knowledge of Python, C, C++, or SQL for automation, scripting, or data analysis would be an added advantage.
• Experience supporting documentation such as work instructions, PFMEA, or control plans would be beneficial for success in this position.

Our client is a well-established MNC specializing in precision manufacturing and engineering solutions, supporting customers across various industries globally. They are looking for a Mold Process Engineer (SPD Tester) to join their Engineering team. They are located in the (West) – easily accessible.

Responsibilities for Mold Process Engineer (SPD Tester):

• Provide engineering support for injection moulding, assembly, packaging, and manufacturing operations.
• Troubleshoot process, tooling, and equipment issues to improve production efficiency and minimise downtime.
• Analyse process variances and implement corrective actions to improve yield and process stability.
• Support process development, optimisation, and validation activities for new and existing products.
• Execute validation activities including Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ).
• Conduct Design of Experiments (DOE), process studies, and technical evaluations to enhance process capability.
• Prepare and maintain Standard Operating Procedures (SOPs), validation reports, and technical documentation.
• Perform Process Failure Mode and Effects Analysis (pFMEA) and support continuous improvement initiatives.
• Work closely with Production, Quality Assurance (QA), Maintenance, and Engineering teams to ensure smooth manufacturing operations.
• Ensure manufacturing activities comply with ISO 9001, ISO 13485, and ISO 14001 standards.

Requirements:

• Diploma or Degree in Mechanical Engineering or related discipline.
• Minimum 3–5 years of relevant working experience in plastic injection moulding environment.
• Knowledge of validation protocols including IQ, OQ, and PQ.
• Familiar with Scientific Process Development (SPD) methodologies.
• Experience in DOE, process optimisation, and troubleshooting will be advantageous.
• Exposure to ISO 9001 and ISO 13485 environments will be an added advantage.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/CV.
We regret that only shortlisted candidates will be notified.

Email Address: jobs@recruitpedia.sg
EA License No: 19C9682
EA Personnel No: R22104769
EA Personnel Name: Ong Boon Kiet (Travys)

Micron’s Singapore Technology Development (TD) team is seeking a passionate and driven Process Development Engineer to support the rapid deployment of advanced NAND technology nodes. This role is critical in enhancing process margins, integrating new technologies into manufacturing, and collaborating globally to shape the future of memory technology.

Key Responsibilities

• Develop and optimize unit processes to meet yield and quality targets for advanced NAND devices

• Evaluate innovative process and equipment solutions for early experimentation and process margin improvement

• Collaborate with Singapore-based Diffusion manufacturing teams to identify and prioritize key technology challenges

• Integrate and troubleshoot processes within cross-functional teams focused on yield and quality enhancement

• Partner with Boise TD Films teams to align future device requirements with process capabilities

• Identify disruptive process technologies early and define viable implementation paths with global TD and manufacturing teams

• Conduct fundamental research, hardware evaluations, and novel process testing to support intellectual property generation

• Design and execute experiments to expand process margins and validate manufacturability of next-node solutions

• Lead cross-functional initiatives to simplify processes and implement improvements

• Embed best-known manufacturing practices into early-stage development of new nodes

• Develop and apply advanced process monitoring and control methodologies.

• Serve as a technical expert, contributing to process, equipment, and procedural improvements

• Lead multidisciplinary projects across teams, sites, and suppliers focused on quality, yield, cost, and productivity

• Advise management on significant technical issues and drive innovation through patents and technical publications

• Maintain strict adherence to Micron’s Intellectual Property protection policies

• Engage continuously with global TD partners and suppliers to push for breakthrough solutions

• Own and manage module-level business processes

Requirements

• Bachelor/Masters in Materials Science, Electrical/Electronics, Chemical, Microelectronic Engineering, Physics with minimum 5 years of relevant experience or PhD in Materials Science, Electrical/Electronics, Chemical, Microelectronic Engineering, Physics

• Strong understanding of:

• - Flow dynamics, thermodynamics, and physical phenomena in deposition

• - Precursor depletion effects in 3D structures and mitigation strategies

• - Interface characterization techniques (e.g., SIMS, XPS, EDX, SEM/TEM)

• - Integration and structural constraints in film deposition processes

• - Memory process flows, especially for planar and vertical NAND

• Proficiency in data analysis tools (e.g., Y3) and Design of Experiments (DoE)

• Excellent communication skills for both in-person and remote interactions

• Self-motivated, adaptable, and capable of managing multiple projects in a dynamic environment

The Defectivity Line Control Engineer is responsible for controlling defectivity in semiconductor wafer fabrication through daily line monitoring, OOC management, tool excursion response, and cross-functional problem solving. The role supports both routine operations and improvement activities to ensure stable process performance, product quality, and effective industrialization.

Key Responsibilities

• Analyze defect Pareto, defect maps, and characterization data to identify root causes and containment actions.
• Drive tool OOC reduction and lead sporadic defect reduction activities.
• Lead the troubleshooting of defectivity alert and involve in Material Review Board for material assessment and disposition.
• Support troubleshooting of defectivity alerts and escalation of critical issues.
• Work closely with process, equipment, device, quality, and production teams to drive defect reduction and line stability.
• Support technology transfer and industrialization activities to ensure smooth deployment of new products and processes.
• Responsible for setting up, optimizing, maintaining Process Defectivity Systems like Automation system (Auto defect sampling, Auto DOI, DOLI), Defect library.
• Opportunity to involve in deployment of Advanced Defectivity Monitoring system involving AI, Convolution Neural Network (CNN) and deep learning with DIT team and opportunities to learn and apply data analytics.

Skills and Competencies

• Degree in Material Science/Electrical/Electronics/Microelectronics/Mechanical/Physics/Chemistry. 
• Preferred minimum 3 years working experience in semiconductor wafer fabrication industry and good knowledge in Defectivity methodology and knowledge of Defectivity inspection tool. Fresh graduate is welcomed to apply as well.
• Knowledge in Klarity Defects/AceXP/Space/Spotfire and other Defectivity related tool will be an added advantage.
• Strong analytical and problem-solving skills.
• Good understanding of semiconductor wafer fab processes.
• Ability to work across departments and communicate clearly.
• Proactive mindset with strong ownership and teamwork.
• Self-driven and independent with an inquisitive mind.
• Familiar with SPC concept and other problem-solving tools: SPACE, FMEA, 8D, Data mining analysis and AI base on Convolution Neural Network (CNN) will be advantageous.