Total 12 Others level Quality Assurance / Control job vacancies in BAYAN LEPAS

• Responsible for new product quality requirement, PQE function.
• Ensure products manufactured meet Customer requirements. 
• Responsible for Line process control and complaint management. Follow rule : 1-2-14 1.4.
• Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
• Ensure closed loop of internal and external audit finding include product safety audit.
• Monitor and supervise QMM technician performance to ensure efficiency in quality management process.
• Responsible for process improvement project and update Management on the improvement result.
• Responsible for Quality problem resolution through problem solving sheet PSS/8D.
• Responsible for inspection plan for incoming and outgoing (FQ, VQ).
• Responsible for component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities without delay.
• Monitor, report of KPI’s in timely manner and establish action plan.

New Product Introduction

• Responsibility for –Start up projects, warranty, customer complaint, first article approval (ISIR), reliability testing, etc.
• New project product qualification test include fulfill the regulation requirement.
• Actively involves in UX, QG, FMEA, PQP and production line release. Ensure all the QG open point closed within defined due date or latest 3 months after SOP.
• Prepare product test plan, product inspection plan (EP), QZ test plan (QZTI) and FQ/VQ checklist.
• Provide training to QMM test technician on all the related inspection plan and checklist.
• Work with service center to understand the product quality level in the market, at least monthly reporting is expected.
• Coordinate project testing, investigate the failure and ensure close loop of the action implemented. Follow rule of PSS/8D 1-2-14.
• Responsible for part release.
• Ensure all ISIR requirements are fulfill before ISIR released i.e. Cpk > 1.33, PQA sign off, control plan and released critical components supplier qualification process.
• To ensure measurement methodology alignment between PgP2 and supplier during technical discussion with supplier via PQA.
• To ensure all related fixture including incoming inspection, short endurance for VQ/FQ audit, practical tests are ready 2 weeks before pilot.

Operation Support

• Responsible for in process & outgoing product quality performance.
• Responsible for MSA, calibration, concession management, customer complaint management, etc.
• Provide assistance to resolve line FOR issues.
• Support PUQ on supplier incoming material quality issue disposition and 8D verification and evaluation.
• Support cost saving activities and approve alteration change.
• Regular review with production personnel for PQP and FMEA.
• Perform failure analysis on customer – warranty complaint tool and drive for improvement to achieve the agreed target. Target to roll out improvement actions within 3 months after solution is defined.
• Ensure ANDI/CR contents is checked before release and implemented correctly.
• Conduct periodic audits to ensure line and process compliances. Expected monthly audit reporting is needed to submit to supervisor and include action plan of manufacturing.
• Conduct Failure Investigation with cross-functional team eg. ENG, PUQ, MSE for non conformance incidents if needed.
• Drive cross functional team for Quality process improvement (e.g. Elimination of inspection, warranty limit).
• Responsible for plant to plant quality complaint management.
• Responsible for product transfer on quality measures between plant.
• Responsible for monthly Product CIP, Process CIP, warranty analysis reporting.

The PQE is responsible for ensuring quality and reliability performance of our products, wherever they are designed, manufactured, and assembled, by performing best in class Product Qualification in accordance with international standards and customer requirements. The PQE is also responsible for Reliability Monitoring through ORT.

The PQE works cross-functionally with Design, Test, Manufacturing, Reliability Labs, FA Labs, and Customer/Supplier Quality to prevent defects, drive robust product quality and continuous improvement initiatives.

Key Responsibilities

• Define, perform, and review Qualification (new products, second source, material changes, design changes, process changes, …)
• Define, evaluate, and implement suitable stress tests for related product applications.
• Ensure product compliance with internal specifications, customer requirements, and applicable standards (e.g., ISO 9001, IATF 16949, IEC, JEDEC, etc.).
• Communicate qualification plans and data with customer (Silicon, Package and Board Level).
• Participate in risk assessments (e.g., DFMEA) and ensure mitigation actions are implemented and validated.
• Review qualification test results, assess risks, and provide quality approval for production release or change management.

The PQE is responsible for ensuring quality and reliability performance of our products, wherever they are designed, manufactured, and assembled, by performing best in class Product Qualification in accordance with international standards and customer requirements. The PQE is also responsible for Reliability Monitoring through ORT.

The PQE works cross-functionally with Design, Test, Manufacturing, Reliability Labs, FA Labs, and Customer/Supplier Quality to prevent defects, drive robust product quality and continuous improvement initiatives.

Key Responsibilities

• Define, perform, and review Qualification (new products, second source, material changes, design changes, process changes, …)
• Define, evaluate, and implement suitable stress tests for related product applications.
• Ensure product compliance with internal specifications, customer requirements, and applicable standards (e.g., ISO 9001, IATF 16949, IEC, JEDEC, etc.).
• Communicate qualification plans and data with customer (Silicon, Package and Board Level).
• Participate in risk assessments (e.g., DFMEA) and ensure mitigation actions are implemented and validated.
• Review qualification test results, assess risks, and provide quality approval for production release or change management. 

• As a subject matter expert, you will consistently work to improve our suppliers' performance and the quality of our products.
• Supplier Auditing: Own the auditing process across all supplier management phases, including potential analysis, Cooperate Social Responsibility audits, initial sample process audits and comprehensive process audits.
• Supplier Development: Lead and support supplier quality and cost improvement activities. Conduct workshops, trainings, and regular follow-up visits to enhance supplier capabilities and performance in line with Bosch's requirements.
• Problem Solving: Intervene in critical supplier quality issues. You will take the lead onsite when our global plants require local support or when progress is stalled. Your role is to expertly coach the suppliers to master and apply structured problem-solving tools (e.g., 8D, 5-Why, Ishikawa) to ensure root causes are identified and holistically eliminated.
• Supplier Escalation Management: Manage supplier escalations that require higher management involvement, including the implementation and execution of dedicated quality measures, through to successful de-escalation.

Job Summary
1. Role
1.1 Q-Support to PPU in Production Part Approval Process (PPAP) and Preventive Quality Planning (PQP) as part of TTM process.
1.2 Main interface of rBU all supplier quality related issues after SOP (e.g. ECR, 8D, concessions, defect cost reimbursement, and etc).
1.3 First escalation level for the Plant for purchased parts quality issues.
1.4 Support achievement of Cost targets for related Product Group along the entire Product Life Cycle.

2. Job Scope
2.1 Purchasing Quality responsibility and accountability for the responsible Product Group within the rBU along the product life cycle.
2.2 PQP (Preventive Quality Planning) for purchased parts; Operative handling of initial samples / ISIR release.
2.3 Complaint management.
2.4 Blocked stock handling & Concession handling.
2.5 Represent Purchasing in Plant Point-CIP activities.
2.6 Measure supplier Quality Performance: Plant / rBU specific KPIs.
2.7 Operative handling of quality cost reimbursement.
2.8 Trigger escalation of supplier (as input of Q-escalation process).
2.9 Support all the relevant quality projects in rBU project team.
2.10 RPP / Tooling (incl. tooling transfer): Tech. Discussion, measurement harmonization, Process audit, Test & qualification-check, Product Certifications.
 

Test Planning & Execution

• Plan, coordinate, and execute testing activities according to approved test plans and procedures.
• Ensure testing is conducted accurately, consistently, and in compliance with defined standards.
• Monitor test progress and ensure timely completion of testing activities.
• Review test results with Product Quality Engineers and approve test reports in accordance with quality requirements.
• Support root cause analysis and follow up on corrective actions until closure.

Test Lab Management & Operations

• Responsible for overall test laboratory operations including capacity planning and workload balancing.
• Ensure optimal utilization of test equipment, materials, and resources.
• Manage inventory control for testing materials and consumables.

Equipment Maintenance & 7S

• Ensure all testing equipment is properly maintained in good working condition.
• Maintain safe and organized lab environment.

Training & Competency Development

• Ensure all test technicians and workers are properly trained before performing any testing activities.

Knowledge and Exposure

• Data analysis and reliability testing
• Failure analysis and problem-solving methodology
• Good in 7S.

Behavioral Competencies

• Drive achievement and excellence.
• Independent, initiative and proactive.
• Able to work with peers and functional team.
• Able to lead and guide a group of technicians.

Key Responsibilities

• Act as Plant Product Owner for assigned product families from manufacturing stage through end-of-life (EOL).
• Serve as the main interface between Plant and Development for all product-related HW/SW issues.
• Drive First Pass Yield (FPY) performance and implement continuous improvement actions to meet targets.
• Lead root cause analysis and problem-solving activities for production and quality issues (e.g., FOR, field returns, 0km defects).
• Take ownership as Task Force Leader for critical product or process issues, coordinating cross-functional resources.
• Support failure analysis (FA) activities and collaborate with teams to define effective diagnostic tools.
• Transfer product know-how from development to plant during industrialization and ensure smooth product ramp-up.
• Participate in new product development (NPD) phases to incorporate plant lessons learned and prevent recurring issues.
• Provide technical risk assessments and decision justification for quality-related concerns.
• Lead and support cost improvement initiatives (e.g., RPP, IDC) to achieve plant and corporate targets.
• Develop and implement engineering and automation solutions to improve efficiency and reduce scrap.
• Ensure manufacturing readiness through line buy-off, release, and validation activities.
• Conduct technical training for production technicians and engineers.
• Collaborate with internal teams, contract manufacturers (CM), and stakeholders to achieve operational goals.
• Support data analysis and reporting (e.g., SQL queries, technical presentations) for management and customers.
• Provide support in sample builds, testing, and evaluation activities during early product phases.
• Perform additional duties as assigned by management.

The Quality Control Engineer is responsible for ensuring that products and manufacturing processes meet required quality standards. This role involves monitoring in‑process quality, performing data analysis, managing change processes, supporting audits, driving continuous improvement to enhance product reliability and manufacturing efficiency, ensures that new product introduction builds meet all quality and reliability requirements before mass production.

Key Responsibilities

• Establish, monitor, and drive improvement of critical product and process quality metrics (yield, defect rates, Cp/Cpk, and reliability).
• Develop, implement, and maintain Control Plans, PFMEA, risk assessments and product/process qualification activities to ensure stable and compliant manufacturing processes.
• Drive cross-functional issue resolution with Process, Equipment, and Operations teams, leading root cause analysis and corrective/preventive actions using structured problem-solving methodologies (e.g., 8D, Fishbone, 5-Why).
• Support customer quality requirements, including audits, documentation control, and technical discussions.
• Ensure compliance with applicable industry and customer quality standards (e.g., ISO 9001, IATF 16949, VDA 6.3, customer-specific requirements) and continuously improve quality processes, lessons learned, and best practices.

The PQE is responsible for ensuring quality and reliability performance of our products, wherever they are designed, manufactured, and assembled, by performing best in class Product Qualification in accordance with international standards and customer requirements. The PQE is also responsible for Reliability Monitoring through ORT.

The PQE works cross-functionally with Design, Test, Manufacturing, Reliability Labs, FA Labs, and Customer/Supplier Quality to prevent defects, drive robust product quality and continuous improvement initiatives.

Key Responsibilities

• Define, perform, and review Qualification (new products, second source, material changes, design changes, process changes
• Define, evaluate, and implement suitable stress tests for related product applications.
• Ensure product compliance with internal specifications, customer requirements, and applicable standards (e.g., ISO 9001, IATF 16949, IEC, JEDEC, etc.).
• Communicate qualification plans and data with customer (Silicon, Package and Board Level).
• Participate in risk assessments (e.g., DFMEA) and ensure mitigation actions are implemented and validated.
• Review qualification test results, assess risks, and provide quality approval for production release or change management.

Key Responsibilities

• Develop, implement, and monitor cleanroom environmental surveys, to verify compliance and support area buy-off.                             
• Develop and execute contamination sampling plans for cleanroom environmental, equipment, tools, and process samples to ensure cleanliness and prevent yield-impacting defects.                            
• Perform routine and event-based environmental and equipment sampling to support operational readiness and cleanroom classification.                                
• Manage handling and qualification of cleanroom indirect materials by setting cleanliness criteria, performing inspections, and approving materials for use.                                   
• Define cleanroom protocols, including gowning, behavior, and contamination prevention practices, and provide training to ensure compliance.                                   
• Define and coordinate with laboratories implement test plans, analyse cleanliness data, investigation deviations, and recommending mitigation actions for product & process cleanliness compliance.    
• Collaborate with cross-functional teams in production, facilities, quality, and engineering to support contamination control strategies and maintain acceptable cleanliness levels.

Job Summary

• Responsible for Battery testing (qualification, sample, reliability), documentation, problem resolution and failure analysis.
• Ensure released Battery is fulfilling the internal standards, external product safety and country specific requirements.  
• Perform failure analysis on failed Battery from qualification, testing, QZ, warranty and customer complaints. Drive for problem solving and improvement implementations.
• Review & monitor the effectiveness of the Battery test plans and implement improvements where necessary. Perform & ensure test method alignment between test labs.
• Responsible on the accuracy and competency of test reports generated.
• Support component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities.
• Manage and improve software quality processes, including requirement analysis, test case design, and defect tracking.
• Maintain and optimize test documentation in tools like CodeBeamer or SharePoint.
• Establish initial software testing strategy and its quality assurance methodologies, prepare training information package and provide training to quality engineers.

Job Scope

• Testing and qualification: Responsible for conducting testing and qualification of Batteries. Ensure meeting committed date to customer with accurate report.
• Develop, review and monitor the effectiveness of the Battery test plans and implement improvements where necessary. Develop test fixture / adaptor and plan equipment for better testing efficiency.
• Establish work instructions for all equipment and testers, with regular review to ensure validity. Train test technicians and ensure their competencies in performing testing.
• Work with project teams to realize the Battery testing schedule / life cycle.
• Responsible for failure analysis and postmortem on defects by using appropriate tools methodology e.g. 5 Why’s, RCA, FTA. Drive for improvements implementation.
• Provide advice on applicable test method to address root-cause of failure and improvement opportunities.
• Conduct regular and quarter review on defect trend for Battery failures for quality management. Conduct Failure Investigation with cross-functional team for non conformance incidents.
• Perform failure analysis on failed parts (inclusive customer and warranty complaints) and support improvement to achieve the agreed target.
• Conduct periodic audits on lab for lab compliances on functions and safety. Adhere 7S practice.
• Software Quality Assurance, requirement management, documentation & compliance
• Define and implement quality standards for embedded software and related applications in power tools.
• Develop and maintain test strategies, test plans, and test cases for software components, ensuring compliance with functional and safety requirements.
• Analyze software requirements for completeness and testability.
• Manage and track defects using tools like CodeBeamer, ensuring timely resolution and proper documentation.
• Continuously improve QA processes, maintain comprehensive documentation in Share Point for test processes, results, and quality metrics.
• Work closely with development, hardware, and system teams to ensure software quality aligns with product performance and safety standards.
• Any other matters as assigned by Superior to meet the target and deadline.

Job Summary

• Responsible for new product quality requirement.
• Ensure products manufactured meet product & process quality requirements.
• Customer complaint resolution and product warranty improvement.
• Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
• Ensure closed loop of internal and external audit finding include product safety audit.
• Monitor and supervise QMM technician performance to ensure efficiency in quality management process.
• Responsible for process improvement project and update Management on the improvement result.
• Responsible for Quality problem resolution through problem solving process PSS/8D.
• Generate and maintain inspection plan for in-process (EQ, FQ) and outgoing (VQ).
• Responsible for component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities.
• Monitor, report of KPI’s in timely manner and establish action plan.
• Any other tasks or responsibilities assigned by superior.

Job Scope

New Product Introduction

• Responsibility for – Start up projects, warranty, customer complaint, first article approval (ISIR), reliability testing (QZ), etc.
• New project product qualification test include fulfill the regulation requirement.
• Actively involves in FEP, QG, FMEA, CP and production line release.
• Prepare product test plan, product inspection plan (EP), QZ test plan and FQ/VQ checklist.
• Provide training to QMM test technician on all the related inspection plan and checklist.
• Work with service center to understand the product quality level in the market.
• Coordinate project testing, investigate the failure and ensure close loop of the action implemented.
• Responsible for part release and incoming inspection plan.
• Ensure all ISIR requirements are fulfill before ISIR released e.g. S,F,L, and Cpk > 1.33, etc.
• To ensure measurement methodology alignment between PgP2 and supplier.
• To ensure all related fixture including short endurance for VQ/FQ audit, practical test are ready before pilot.  
• Lead Q-VSM process and ensure fulfillment during pilot stage.

Operation Support / Value Stream Quality

• Responsible for product & process quality in Value Stream, support VSM on product & process quality performance.
• Responsible for quality management in process changes, sorting & rework flow buyoff, concession management, customer complaint management, etc in the Value Stream.
• Responsible for quality management of ALR, product relocation, plant to plant activities, new line/equipment, machine/process parameters/software buyoff, etc.
• Support & drive PUQ on supplier incoming material quality issue disposition and 8D verification and evaluation.
• Support cost saving, 2nd / alternatives source activities and approve alteration change.
• Regular review with production personnel for CP and FMEA.
• Perform failure analysis on customer – warranty complaint tool and drive for improvement to achieve the agreed target.
• Ensure ANDI contents is checked before release and implemented correctly.
• Conduct periodic audits to ensure line and process compliances.
• Conduct Failure Investigation with cross-functional team for non conformance incidents.
• Drive cross functional team for Quality process improvement (e.g. Q VSM, functional test quality gates, MES quality data analysis, etc).
• Responsible for plant to plant quality complaint management.
• Responsible for product transfer on quality measures between plant.
• Responsible for monthly Quality meeting, warranty analysis reporting.