Equipment Service Engineer

Working day: Monday – Friday, 830am - 5:30pm
Salary range: $3000 - $4800
Location: Woodlands Ave (Nearest Mrt: Admiralty)

This Equipment Service Engineer will be responsible for installing, testing, and maintaining automation systems, troubleshooting and repairing electrical/electronic components, configuring software, and ensuring smooth communication with customers. They will handle support requests, coordinate with internal teams, and provide accurate service reports.

Responsibilities

• Automation system installation, testing, commissioning, and maintenance.
• Setup electronics controllers, PC, and install software.
• Perform onsite machine buy-off as per agreed customer requirements
• Analyze equipment failures and identify root causes to effectively repair equipment failures.
• Able to analyze electrical/electronic circuit, read machine logfiles to identify root cause for the problem
• Able to repair electrical components, setup robot software, PC software.
• Establish a seamless interface between customers and the company.
• Demonstrate high integrity and work independently with minimal supervision.
• Spearhead customer issues and coordinate with internal departments and customer stakeholders to resolve them efficiently. Escalate to management if necessary.
• Respond to phone support and onsite support requests in accordance with SLA.
• Prepare and present accurate, detailed service reports in a timely manner.

Job Requirement:

• Diploma or Bachelor’s degree in Electronics, Computer Engineering or equivalent
• Min 3 years or more of experience in automation systems setup or service support
• Proficiency in electrical components such as servo motors and robots
• Proficiency in installing software, configuration and setting up PCs and machines
• Ability to read equipment log files and process flows to debug machine breakdowns
• Willingness to travel for overseas assignments on short notice.

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

Working days: either 4 days 12 hours rotating shift

Location: Islandwide , office at Woodlands

Salary: $2800 -$3500 depends on experience

Job scope:

• Semiconductor machines startup and installation

• Perform equipment on-site installation, diagnosing, troubleshooting, servicing, and repairing

• Perform equipment continuous improvement programmes, preventive maintenance, modifications and repairing works

• Serves as company contact point with customer on technical matters

• Attends to customers complaints and provides timely solutions

• Other ad hoc duties

Requirements:

• Nitec/ Diploma in Mechanical/ Mechatronic Engineering or related discipline

• Hands-on experience in semiconductor machine maintenance

• Able to work in cleanroom environment

  
  

Kelly Chong Reg No:R26161160

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Interested applicants are invited to apply directly at the NUS Career Portal. Please note your application will only be processed if you apply via NUS Career Portal.

NUS Career Portal link: https://careers.nus.edu.sg/job/Research-Engineer-%28SHINE-Industry-Projects-and-Programme-Support%29/33489-en_GB/

We regret that only shortlisted candidates will be notified.

Job Description

SHINE Industry Projects and Programme Support
•             Coordinate SHINE consortium activities and industry project administration.
•             Support coordination among researchers, industry partners, government agencies, and internal stakeholders to facilitate SHINE activities and industry collaborations.
•             Coordinate industry project activities, including tracking project progress, deliverables, milestones, and reporting requirements.
•             Maintain project documentation, records, and administrative materials to support project execution and compliance requirements.
•             Support technical workshops, industry engagements, consortium activities, and collaborative initiatives involving SHINE researchers and industry partners.
•             Organise workshops, seminars, technical talks, industry visits, and stakeholder engagement activities.
•             Support development of postgraduate programme operations and related programme initiatives.
•             Liaise with researchers, industry partners, government agencies, students, and internal stakeholders to support programme objectives.
•             Provide administrative and operational support for SHINE initiatives and other ad-hoc programme activities as assigned.

Qualifications

•            Possess a Bachelor's degree in a STEM discipline (Science, Technology, Engineering or Mathematics), preferably in Electrical Engineering, Computer Engineering, Materials Science, Physics, Mechanical Engineering, or a related field.
•             Relevant experience in project coordination, industry collaborations, stakeholder engagement, programme administration, research administration, or related functions would be advantageous.
•             Experience coordinating projects, workshops, industry engagements, postgraduate programmes, internships, or multi-stakeholder initiatives would be advantageous.
•             Ability to engage effectively with researchers, students, industry partners, government agencies, and other stakeholders.
•             Strong interpersonal, communication, stakeholder management, and organisational skills.
•             Ability to manage multiple priorities and work effectively in a dynamic environment.
•             Experience in a university, research institute, government agency, corporate laboratory, or technology-related environment would be advantageous.
•             Familiarity with semiconductor technologies, advanced packaging, microelectronics, photonics, or related technology domains would be advantageous.
•             Self-motivated, resourceful, and able to work independently as well as collaboratively within a team.
•             Open to appointment on a fixed-term contract.

Sales Region: 50% Singapore and 50% Asean (Malaysia, Indonesia and Philippines)

• New customers creation. To identifying potential customers with planning and organizing sales call schedule by cold calls or given sales leads. Candidate is also required to maintain and servicing of existing customers. Address sales and engineering support goals, contributing to weekly, monthly and annual sales report, analysing expenses, identifying inconsistencies and troubleshooting issues.
• Prepare and making of product presentation, provide product application support, demonstrate or performing of Installation on the appropriate sales engineering equipment according toorders, specificities and preferences.

• Communicate with Principals (Suppliers) and Sales team together to drive for achieving sales goal. Selected candidate will be receiving product training, which may include product information, product application, maintenance, service support or deal with system breakdowns that occurred.

• Achieve related duties and responsibilities as necessary to support, organize and monitor the success of the sales engineering department and productivity. Serve customers by identifying their needs and engineering adaptations of products, equipment, andservices.

• Identifies current and future customer requirements by establishing personal rapport with potential and actual customers and others in a position to understand their different need of product or service requirements. Prepare cost estimates by studying all related customer documents, consulting with engineers and other professional personnel.

• Determines improvements by analysing cost-benefit ratios of equipment, supplies, or service applications in customer environment and engineering or proposing changes in equipment, processes, or use of materials or services. Gains customer acceptance by explaining or demonstrating cost reductions and operations improvements. Develops customer’s staff by providing technical information and training.

• Complies with local legal requirements by studying existing and new legislation and anticipating future legislation. Prepares sales engineering reports by collecting, analysing, and summarizing sales information and engineering and application trends.

• Contributes to sales engineering effectiveness by identifying short-term and long-range issues that must be addressed, recommending options and courses of action, and implementingdirectives. Contributes to team effort by accomplishing related results as needed.

Requirement:

• Minimum Diploma/Degree in Electronics/Photonics Engineering or related engineering field.
• 2 years of experience in sales industry preferred. Those without experience are welcome to apply as training will be provided

• New customer development. Ready to make cold calls. Presentation & Communication skills. Technical understanding.

• Requirements analysis & innovation. Familiar with Microsoft Office software.

Others:

• Date of Commencement: ASAP or short notice  

• Transport Allowance: SGD$80 per month

• Variable Bonus: Yes (Twice a year, May & Dec)

• Working Hours: 830am to 530pm (Mon - Fri)

• Annual Leave: 10 days (+ 1 day per year, max 16 days)

Jessica Nguyen Huynh Thanh Truc

CEI Reg. No. R23113787

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.

Job Title: CNC Maintenance Technician / Engineer (ID4686)
Location: Boon Lay
Working Hours:Monday to Friday: 9:00 AM – 7:00 PM, Saturday: 9:00 AM – 5:00 PM
(Work on 3 Saturdays per month, off on 1 Saturday)
Salary : $3000-$4000

CNC Maintenance Technician / Engineer
Key Responsibilities:
• Perform regular maintenance and inspection of CNC machines (lathe, milling, etc.)
• Troubleshoot mechanical, electrical, and control issues in CNC equipment
• Replace or repair defective components, such as servo motors, ball screws, spindles, etc.
• Maintain and calibrate CNC machines to ensure machining precision
• Work closely with the production and engineering team to ensure machine uptime
• Maintain accurate records of maintenance activities
• Comply with safety standards and company policies at all times

Job Description

Decarb Engineering & Construction Pte Ltd is a Singapore-based M&E EPC contractor specialising in Fire Protection, ACMV, and ELV systems, holding bizSAFE Star and ISO 9001/14001/45001 certifications. We are seeking a Mechanical Engineer to lead the design, engineering, and delivery of water-based and special hazards fire protection systems — including clean agent gas suppression, across commercial, industrial, data centre, and process facility projects.

Roles & Responsibilities

• Design and engineer fire protection systems: wet/dry riser, sprinkler, hose reel, hydrant, fire pump, and water storage systems.
• Lead design and delivery of special hazards systems — clean agent gaseous suppression (FM-200/HFC-227ea, Novec 1230/FK-5-1-12, inert gas/IG-541/IG-55), CO₂ systems, water mist, and aerosol/condensed aerosol suppression.
• Perform hydraulic calculations, enclosure integrity assessment, and clean agent concentration/quantity design calculations to NFPA 2001 / ISO 14520.
• Prepare design drawings, schematics, BOQs, technical submittals, and method statements for consultant and SCDF/authority approval.
• Conduct system sizing, equipment selection, and vendor/OEM coordination (e.g. cylinder banks, nozzles, detection-actuation interface).
• Oversee installation, testing, and commissioning — including room integrity (door fan) testing and discharge testing where applicable.
• Coordinate the detection-and-release interface between gas suppression and fire alarm systems.
• Ensure full compliance with SS CP 52, SS 575, SS 578, NFPA 13/14/20/2001/12/750, and SCDF requirements.
• Liaise with clients, consultants, main contractors, and authorities through design, submission, delivery, and handover.
• Provide site technical support, fault diagnosis, and resolution during execution and defects-liability periods.

Requirements

• Degree or Diploma in Mechanical Engineering or related discipline.
• 3–6 years' experience in fire protection design/engineering within the M&E or building/construction industry.
• Demonstrated experience with clean agent / gaseous suppression and special hazards systems.
• Proficiency in hydraulic calculation software (e.g. HydraCAD, Pipenet, AutoSPRINK) and AutoCAD.
• Working knowledge of Singapore fire codes (SS CP 52, SS 575, SS 578) and NFPA standards (13/14/20/2001).
• Familiarity with SCDF submission and approval processes (Qualified Person coordination, FSSD requirements).
• Strong calculation, technical documentation, and problem-solving skills.
• Experience in data centre, semiconductor, or process/industrial facilities an advantage.
• Valid Class 3 driving licence a plus.
• Good communication and coordination skills for multi-disciplinary project delivery.

JOBID: 00582

Job Descriptions:

• Perform laser unit installation and alignment on laser depaneling machines.

• Configure depaneling machines according to internal specifications and customer requirements, including camera calibration, field calibration, and software debugging.

• Conduct health checks on incoming laser units and coordinate with vendors to resolve defects or delivery issues.

• Maintain records of laser parts and optical components installed on machines.

• Support laser processing experiments and studies as needed, including laser cutting trials and measurements of processed samples.

• Troubleshoot laser-related issues on deployed depaneling machines once proficient.

• Provide customer training, demonstrations, and guidance on process parameters and machine operations once proficient.

• Collaborate with internal design teams and external vendors to develop solutions for unique customer applications once proficient.

• May require up to 5% overseas travel.

Job Requirement:

• Diploma or Degree in Engineering.

• Strong interest and hands-on experience with machines.

• Minimum of 3 years of relevant work experience, with proven experience in the automation industry and working with automation machines.

• Strong knowledge of laser machines; experience in optics and laser systems is highly advantageous.

• Possession of a laser license.

• Ability to troubleshoot and provide technical solutions independently.

Please submit your updated resume in Word format by using the Apply Now Button.

We regret that only shortlisted candidates will be notified.

Email resume to che••••••••••@peopleprofilers.com

People Profilers Pte Ltd, 20 Cecil Street, #08-09 PLUS Building, Singapore 049705

Tel: 69•• •744

Posting Personnel: Ding Xin Er

EA Licence Number: 02C4944

Registration Number: R22106669

Executive Summary

Smart IMS Inc provides Digital technology & Cloud transformation services, Application & Infrastructure Management Services, Unified Communications, and Insurance implementation services to customers across the Americas, Europe, Middle East, and Asia-Pacific regions.

As the trusted technology and business partner of leading MNCs, including Global Investment Banks, Smart IMS is also a Microsoft Gold Certified Partner, Oracle Platinum Partner and AWS MSP Partner.

We currently have an opening for a Capacity Engineer (Data Center) role for our client in Singapore which is a leading global investment bank. The Data Centre Capacity Engineer is responsible for capacity planning and management across data centres and network equipment rooms.

This role ensures sufficient space, power, and cooling are available to support current operations and future growth, while maintaining resilience, compliance, and cost efficiency.

Key Responsibilities

Capacity Planning & Management

• Plan and manage data centre and network room capacity covering space, power, and cooling.
• Develop short‑, medium‑, and long‑term capacity forecasts based on IT demand and growth projections.
• Support phased load planning (e.g. IT load ramp‑up by phase).

Infrastructure Assessment

• Evaluate electrical infrastructure including UPS, transformers, PDUs, generators, and redundancy (N, N+1).
• Assess cooling infrastructure such as CRAH/CRAC units, chillers, and cooling towers to support projected IT loads.
• Identify capacity constraints, single points of failure, and mitigation options.

Design & Setup

• Support data centre and network room design, layout, and rack planning.
• Review and validate load calculations for electrical and cooling systems.
• Ensure new deployments align with data centre standards and best practices.

Tools & Inventory

• Maintain accurate capacity data in DCIM and asset management tools (e.g. Nlyte, Remedy).
• Validate inventory accuracy and ensure alignment between physical assets and system records.

Governance & Operations

• Support Method of Procedure (MOP) reviews related to capacity upgrades and changes.
• Work closely with Operations, Facilities, Network, Hosting, and Governance teams.
• Provide input to vendor designs, tenders, and technical reviews.

Reporting & Stakeholder Management

• Produce regular capacity reports and dashboards for management.
• Communicate risks, constraints, and recommendations clearly to stakeholders.

Required Skills & Experience

• Strong understanding of data centre power and cooling infrastructure.
• Experience in capacity planning for data centres and network rooms.
• Familiarity with redundancy concepts and resilience standards.
• Experience with DCIM and asset management tools.
• Ability to work across IT, facilities, and vendor teams.

Preferred Qualifications

• Background in data centre operations, facilities engineering, or infrastructure planning.
• Experience supporting large‑scale or regulated enterprise environments (e.g. financial institutions).

Assistant Mechanical Engineer

We are a dynamic engineering-driven company focused on delivering innovative and high-quality solutions. Join a collaborative team where creativity, precision, and continuous improvement are highly valued.

• SGD 3,500 + AWS + Variable Bonus
• Annual Flexible Benefit of $850
• 5-day work week, Monday to Friday, 9:00AM – 6:30PM
• Tampines North, Singapore

Job Responsibilities

As an Assistant Mechanical Engineer, you will be involved in the design, development, and support of mechanical components and assemblies.

Your responsibilities include:

• Creating detailed 2D drawings and 3D models using SolidWorks based on engineering requirements
• Preparing manufacturing drawings including GD&T, tolerances, BOM, and material specifications
• Collaborating with stakeholders, project managers, and cross-functional teams to ensure design feasibility and compliance
• Maintaining CAD data, drawing revisions, and technical documentation
• Supporting prototyping, testing, and production with accurate technical drawings
• Assisting in troubleshooting design issues and improving product performance
• Providing hands-on support for prototype builds, assembly checks, and part validation

Requirements

• Diploma in Mechanical Engineering or related discipline
• 1 year of relevant experience
• Proficient in SolidWorks and CAD software (2D & 3D)
• Strong understanding of mechanical design and technical drawings
• Detail-oriented, proactive, and willing to be hands-on in engineering tasks

Join Our Team

If you are passionate about mechanical design and eager to grow your engineering career in a hands-on environment, we welcome your application.

Technical Sales Engineer (Ultra High Purity)

We are a global engineering company supporting the semiconductor industry with Ultra High Purity (UHP) equipment solutions. As part of our continued expansion in the semiconductor sector, we are looking for driven individuals to help grow our regional and international business footprint.

• S$4,000 – S$6,000 + Variable Bonus
• Dynamic Hunter-Farmer (50/50) business development role
• 10 Ubi Crescent
• Monday to Friday, 9:00AM – 6:00PM
• Exposure to global semiconductor customers and EPC networks
• Opportunities to attend industry exhibitions and expand market reach
• Strong career growth in a fast-expanding technical sales environment

Job Responsibilities

As a Business Development Engineer, you will play a key role in driving growth and strengthening customer relationships within the semiconductor UHP sector.

Your responsibilities include:

Business Development & Sales Growth

• Maintain and strengthen relationships with existing customers
• Identify and develop new business opportunities within assigned territories
• Proactively engage prospective customers to generate new sales opportunities
• Attend exhibitions and industry events to build market presence

Technical & Commercial Engagement

• Lead technical discussions with customers and support product definition activities
• Monitor project tenders and participate in commercial negotiations
• Analyse market opportunities and competitive landscape
• Provide feedback to regional and HQ teams for product and business strategy development

Customer & Project Coordination

• Coordinate with customers, internal teams, and factories to ensure smooth execution
• Ensure high customer satisfaction in quality, delivery, and after-sales support
• Act as the key liaison between technical and commercial stakeholders

Requirements

• Degree in Engineering or related discipline
• 2–3 years of experience in UHP (Ultra High Purity) applications within the semiconductor industry
• Strong sales-driven mindset with proven business development experience
• Established network with semiconductor EPC companies and end users preferred

Join Our Team

If you are a motivated and commercially driven engineer looking to grow in the semiconductor UHP industry, we welcome you to join our expanding team.

Job Description

• Industry/ Organization Type: M&E Consultancy Firm
• Position Title: Mechanical Design Engineer/Project Engineer (Building and Infrastructure)
• Working Location: East – Paya Lebar
• Working Hours: 5 days (Mon-Fri: 8.30 am - 6 pm)
• Salary Package: Up to SGD 5500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Build relationships with clients and contractors from other organizations
• Carry out duties in accordance with company procedures and implement prescribed systems of work
• Understand design philosophy/design fundamentals and communicate engineering solutions to project stakeholders
• Perform engineering calculations with the aid of engineering software such as Computational Fluid Dynamics (CFD), Full Hydraulic Calculation (FHC)
• Familiar with Architect, Structural/Service Engineers drawings/specifications
• Carry out investigative and technical review works
• Responsible for the development and production of drawings/calculations/specifications /reports
• Set an example for placement of students and junior engineers

APPLY NOW!!!

• Min Diploma in Mechanical Engineering
• Min. 1 year of working experience in the consultancy firm in the design of ACMV, fire, and hydraulic services
• Experience as a Contractor in project execution will be considered
• Experience in Energy Storage System (ESS) / Capability in carbon, sustainability, resources conservation, and renewables will be an added advantage
• Carry out tasks and duties assigned in a positive and dignified manner

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #74684 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

If you are passionate about playing a key role in the success of a Top notch MNC, we want to hear from you!

Our client is a well-established brand in the Information Technology and Services Domain who is now looking for a passionate and driven Software Engineer. This is an amazing opportunity for individuals who want their career in new technology with a global multinational organization.

ABOUT THE ROLE

We are looking for enthusiastic and motivated fresh graduates or junior IT professionals to join our team. This is an excellent opportunity for candidates who are passionate about technology and eager to build a career in Oracle and Talend. No prior experience with Oracle or Talend is required, as comprehensive training will be provided.

ROLES AND RESPONSIBILITIES

• Shortlisted candidates would be sent for 2 months exclusive training in Oracle & Talend.
• On completion of classroom training, selected candidates will be placed on the software/application development team of our ongoing project at our MNC client, where they will receive On-The-Job Training (OJT) on various aspects of Software Development Life Cycle.

REQUIREMENTS

• Fresh graduates or candidates with 0–2 years of IT experience.
• Diploma or Bachelor's degree in Computer Science, Information Technology, Software Engineering, Computer Engineering, or a related discipline.
• Knowledge of at least one programming language (e.g., Java, Python, C#, C++, JavaScript, or similar).
• Basic understanding of SQL or databases is an advantage but not mandatory.
• Strong analytical, problem-solving, and communication skills.
• Eagerness to learn new technologies and work in a collaborative environment.

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression

To submit your application, please email your UPDATED CV in Microsoft Word format to saridha@aven-sys.com and keerthana@aven-sys.com. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name : Saridha Sekar

Reg No. : R1325954

Avensys Consulting Pte Ltd
EA Licence 12C5759

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' personal information and privacy policy.

Working days: either 4 days 12 hours rotating shift or 5 days work week

Location: Islandwide , office at Woodlands

Salary: $2800 -$3500 depends on experience

Job scope:

• Semiconductor machines startup and installation

• Perform equipment on-site installation, diagnosing, troubleshooting, servicing, and repairing

• Perform equipment continuous improvement programmes, preventive maintenance, modifications and repairing works

• Serves as company contact point with customer on technical matters

• Attends to customers complaints and provides timely solutions

• Other ad hoc duties

Requirements:

• Nitec/ Diploma in Mechanical/ Mechatronic Engineering or related discipline

• Hands-on experience in semiconductor machine maintenance

• Able to work in cleanroom environment
  

Kelly Chong Reg No:R26161160

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

• Industry/ Organization Type: Construction/ Ground Engineering
• Position Title: Engineer (Pipe Roofing)
• Working Location: Ang Mo Kio
• Working Hours: Permanent 12 hours Night Shift (7.30pm – 7.30am)
• Salary Package: Basic Salary + Allowances + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Primarily support night shift operations during pipe roofing works.
• Take charge of shift operations on site, acting as the representative of the main contractor.
• Report directly to the Senior Engineer overseeing the designated work area during pipe roofing activities.
• Supervise subcontractors to ensure compliance with all project procedures, safety standards, and work requirements.
• Monitor site activities to ensure works are carried out according to approved plans and specifications.
• Coordinate with site teams to maintain smooth workflow and timely progress of works.

APPLY NOW!!!

• Diploma/ Degree in Civil Engineering, or a related field.
• At least 2 years of relevant experience in LTA projects, preferably in rail-related works.
• Have proven experience in pipe roofing with micro tunnelling machine.
• Willingness to work night shifts.
• Strong communication and interpersonal abilities.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #83713 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Civil Engineer

• Location: within central area [1 – 2 sites]
• Salary: $2500 - $4000
• Working hours: 5.5 days mon - fri 8.30am - 6pm | Sat 830am - 12pm

Roles & Responsibilities

• Responsible for overall project management and coordination to new and existing projects with the proper monitoring of manpower allocation, project requirement and attendance of meeting, etc.
• Prepare, discuss and report project schedule, cash flow, budget, etc. with the management.
• Track and report weekly on project(s) completion.
• Track and forecast on monthly project revenue and expenses, etc and other key project metrics.
• Outline and determine project roles of team members based on respective project requirement, timeframe and budget.
• Outline and determine resource requirement (including staffing, software, hardware, equipment and facilities) of respective projects, based on project specification and requirement.
• Continually seeks opportunities to increase customer satisfaction and strengthen client relationships.
• Communicates effectively with clients to identify needs and evaluate alternative business solutions.
• Leads the respective project team to prioritize signed off project works based on analysis of strategic importance, tasks outstanding, obstacles or barriers, budget resources and deadlines.
• Establish and well documented and communicated schedule for all phases of project(s).

Requirements:

• Degree in Civil & Structural Engineering or its equivalent
• At least 3 years of relevant experience