Total 2,830 Senior Executive software test engineer job vacancies in Hong Kong

Responsibilities

• To review and manage all design documentation for ACMV, BMS, DfMA, Ductless, ESCS system and etc.
• Able to understand construction shop drawing.
• Familiar with calculation of heating/cooling load, equipment sizing (MV& AHU), Electrical load and etc.
• To develop ICDD documentation
• To monitor and verify installation of ACMV Equipment, chillers, air handling units, MV system, packaged units, VRV system, and split units.
• To study and assess drawings, plans, specifications, and other documents relating to the construction project.
• To review, assess and evaluate the execution of the project on a regular basis.
• To troubleshoot and resolve complex issues arising in a project.
• To carry out site visits throughout the project in order to record information on the progress of the project against the agreed programme.
• To verify material requisition and taking-off quantities/site measurement.
• To attend to site tests and inspections.
• To ensure quality standards and all health & safety requirements are adhered to.
• To maintain, manage, and document all project reports and statements.
• To perform other related duties, as assigned Job Requirements.

Requirements:

• Diploma / Degree in Mechanical Engineering, or Diploma in similar fields.
• Must have design and installation experience in ACMV, BMS, DfMA, Ductless Jet Fan, ESCS system etc.
• Experience with ICDD (Interface Control & Data Document) is preferred.
• Must have direct work experience in the construction industry.
• Good knowledge of codes, standards, and procedures.
• Proficient in MS Office, AutoCAD, Revit etc.
• A team player that is self-motivated, proactive, results-oriented with a proven track record in the construction industry.
• Holds himself/herself accountable for assigned scope.

Job Scope

• Involved in planning and development of projects.
• Assist to develop mechanical and/or electrical engineering designs based on project requirements, from conceptual to schematic and detailed designs.
• Assist to design mechanical and electrical systems.
• Assist to conduct project assessments and is able to suggest feasible and creative solutions based on the assessment results.
• Support tendering process.
• Assist to plan the team's manpower and provides on-the-job guidance to junior staffs

Requirements

• Degree in Electrical Engineering or related fields
• Meticulous and highly detail-oriented.
• Has a keen interest to incorporate new technologies into engineering design projects.
• Excellent knowledge in mechanical and/or electrical engineering fields
• Good problem-solving skills.
• Good interpersonal and project coordination skills crucial for networking with internal and external stakeholders.
• Required to work both in office and at project sites.
• Applicants with good experiences will be considered for Senior positions

Job Purpose:

• To liaise with module engineers on defect excursion control
• To drive for defect reduction and yield improvement activities

Job Description:

• Supervise YE Associate Engineers and wafer tech operators to ensure smooth 24/7 inline shift operati
• Train and certify YE Associate Engineers on recipe creation and defect source knowledge
• Maintain and enhance internal SOP/OCAP and involve in internal;/external audit
• Operate FIB/SEM/EDX/OM for inline failure analysis
• Operate and create recipes in Brightfield, Darkfield and other defect inspection tool
• Perform partition analysis on defect source and detailed reports on issues
• Build and develop defect source library.
• Track inline defect performance by layer/process tool/chamber on weekly basis
• Perform killer ration analysis
• Perform defect characterization by process tools
• Continuous improvement activities on defect reductions with Modules / vendors / equipment team
• Liaise with process engineers in different modules to troubleshoot for inline defects and defect reduction activities
• Provide scan support in low yield investigation & co-work with Module/PI/PE on technology & device specific yield enhancement activities
• Automate daily activities to improve troubleshooting speed of team
• Responsible for wafer quality to conform to product requirements and have the authority to stop shipment and stop production to correct quality problems

Job Requirements:

• Masters / Degree in Electrical and Electronic Engineering/ Electronic Engineering / Material Science / Chemical Engineering / Electronic and Physics
• 2 – 8 years relevant fab work experience in high volume manufacturing of electronics components in an Front-end semi-conductor industry.
• Experience in defect analysis and yield enhancement is required.
• Excellent interpersonal and communication skills with good leadership capability.
• Team player.
• Responsible and accountable for complying with and implementing environmental, health, safety and security (EHSS) system, policies, procedures and guidelines that are applicable to your scope of work, thereby maintaining a healthy and safe workplace.

COMPANY DESCRIPTION

YTL PowerSeraya Pte. Limited, a wholly owned subsidiary of YTL Power International Berhad, is in the business of producing, wholesaling, trading and retailing of energy; with a primary focus on electricity. As an established player in Singapore's energy sector, it supplies the country's energy needs through its multi-utilities platform. With a licensed generation capacity of 3,100 MW*, it is one of Singapore's largest electricity generators.

The YTL PowerSeraya Group has three subsidiaries: the retail arm under the Geneco brand provides electricity price plans and energy solutions to homes and businesses, PetroSeraya is the fuel management arm of the Group, and Taser Power which operates Taser Power Plant.

Besides being a Plaque of Commendation (GOLD) awardee at the National Trade Union Congress's May Day Awards 2023, YTL PowerSeraya has adopted three Tripartite Standards under the Tripartite Alliance for Fair and Progressive Employment Practices, and has committed to be a fair and progressive employer. To find out more about the organisation, please visit ytlpowerseraya.com.

*As at 30 Oct 2024, our registered generating capacity with EMA is 2,467.7 MW.

RESPONSIBILITIES

• Ensure maintenance work is executed effectively, efficiently and complied with safety and regulatory requirement.

• Respond and attend to plant failures and forced outages to ensure timely and proper rectification and restoration.

• Plan and ensure safe and timely execution of plant overhaul activities.

• Recommend and implement modification, upgrading and installation plans for plant system and equipment for enhancement, availability and reliability improvement.

• Manage the procurement of parts and services to meet the maintenance needs of the section, including spare parts and external services for routine and breakdown maintenance.

• Lead and manage a team of technical officers and technicians.

• Development of staff.

• Degree in Electronic & Electrical Engineering or equivalent recognised by the Professional Engineers Board.

• Possesses sound knowledge of Control and Instrumentation and good working knowledge of safety and statutory requirements.

• Driven self-starter with strong work ethics.

• Team player with strong analytical, technology and communication skills.

• Is available on standby after office hours for emergency calls.

• Knowledge in cyber security will be advantageous.

• Have a safety mindset and display good workplace safety behaviour.

• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Job Responsibilities:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN. Provide guidance to junior Engineers.
• Setup and troubleshoot issues in recipes/ job files in all metrology tools within the Module.
• Analyze data from passed down to identify chronic process issues, establish improvement programs and lead engineers to resolve them. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Drive team to meet key indices of Uptime and OEE as per the goals set for these indices.
• Take on leadership roles to drive a small cross functional task team to address yield improvement/ excursion issues.
• Facilitate/ initiate CIP programs to optimize process window, cost, yield, and productivity. Establish plans and strategies to optimize process capability to meet operational requirements.
• Resolve complex technical issues in own Module or yield related issues
• Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications / documentation to meet TS16949 Quality Standard requirements.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics / Material Sciences / Mechanical
• Min 2 years of relevant work experience in Thin Film CMP Process and Wafer fabrication process.
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 5 years’ experience or Diploma holders with 8 years’

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

We are seeking an experienced Senior Process Engineer to join our client’s dynamic team.

Job Description (JD)| Senior Process Engineer

This role focuses on patient acquisition, conversion, and relationship management.

Role Summary:

This is a full-time, permanent role where the incumbent will play a crucial part in the design, implementation and optimization of our client’s industrial water treatment processes.

Responsibilities

• Lead the development of mass balances, hydraulic profiles (P&IDs) and process flow diagrams for water treatment plants.

• Conducting process modelling, simulations and pilot testing to validate new technologies and process improvements

• Size and specify process equipment, such as pumps, blowers, tanks and etc. to meet system performance and reliability requirements

• Evaluate supplier proposals, quotations to ensure compliance with technical and commercial requirements

• Collaborating with cross-functional teams to plan and execute projects

• Provide onsite technical support during project execution and lead troubleshooting of operational issues

• Lead plant testing and commissioning.

• Prepare commissioning plans, SOPs, O&M manuals and training materials.

• Support proposal development and tender preparation.

• Mentor junior engineers and designers.

• Execute other ad-hoc tasks assigned to support project and team objectives

Requirements

• Degree in Chemical Engineering, Environmental, Civil Engineering or a related technical discipline

• 8+ years' experience as a Process Engineer or Senior Process Engineer, preferably in the water treatment industry

• Proficient in AutoCAD

• Strong problem-solving, analytical and critical thinking skills

• Excellent interpersonal and communication skills

Com & Ben Packages

• Monthly Basic salary ranges from S$4k to S$7k

• Annual Leaves, Medical Leaves are as per Singapore’s statutory laws.

• Career development opportunity

• The HR Management team is very friendly and co-operative .

Please contact Recruitment Manager Leeza Shaheed (Registration ID: R1770675) at leeza@aethelra.com, info@aethelra.com, aethelraconsulting@gmail.com for further enquiries about the roles and mention the following information on your CV: Executive summary, Nationality, Language proficiencies, Total years of experience, relevant work-related experience- for how many years, availability, expected monthly basic salary, latest drawn monthly basic salary.

AethelRa Consulting Pte. Ltd. UEN: 202536338H | EA Licence No.25C3084

1 North Bridge Rd, #18-03, High Street Centre, Singapore 179094

Emails: leeza@aethelra.com| info@aethelra.com | aethelraconsulting@gmail.com

Website: https://aethelra.com

LinkedIn: https://www.linkedin.com/in/aethelra/

Senior Automation Engineer (High-Impact / Mission-Critical Systems)

We are hiring a Senior Electrical Engineer to be based at our Singapore office. This role will focus in providing technical capability in Infrastructure projects; focusing on technical aspects and project management. 

Main duties: 

• Lead Electrical multi-disciplinary/functional team in the region to deliver projects.
• Perform engineering tasks on the mechanical services from concept, BOD, 35% to 100% designs (including calculations, computer simulations, specifications etc.) for Electrical infrastructure.
• Provide technical guidance to project and design engineers and resolve any technical problems faced during design and construction stages.
• Ensure that consistent quality standards and conformance with design plans / specifications are maintained across the project and coordination with other disciplines to ensure consistency across the project.
• Support in preparing proposals and bids when needed.
• Lead project/site meeting with Client, PM and Consultants from other disciplines (internal and external) through all stages of the project.
• Understand and follow plans, procedures, workflows, systems and tools to meet specific project requirements.
• Liaise and coordinate relevant technical issues with other disciplines.
• Build cultivate and build relationships with client generally as a Doer/Seller role.
• Support site supervision and plant commissioning activities when required.

To be a successful candidate, you shall possess: 

• Degree in Electrical Engineering recognized by PEB Singapore.
• Familiarity with relevant Local Codes and international standards to ensure compliance.
• Minimum 10 years of relevant working experience.
• Ability to work independently and in a team.

Please note:  If you are being represented by a recruitment agency you will not be considered, to be considered you will need to apply directly to Jacobs. Jacobs complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. All qualified applicants will be considered for the position regardless of age, race, religion, language, nationality, marital status, or family responsibilities.

You will oversee the organization’s IT infrastructure, ensuring optimal performance, security, and reliability of servers, network and security systems, as well as cloud services. You will also have to design, implement, and maintain the IT infrastructure of a healthcare organization.

 Perform Systems Administration

• Maintain Windows servers, virtualization platforms, and storage solutions.

• Manage Active Directory, DNS, DHCP, and Group Policy. Ensure high availability and disaster recovery with backups and replication.

• Monitor system performance, troubleshoot issues, and apply patches and updates.

 Maintain Network Services

• Implement network design, configure, and maintain LAN, WLAN, and VPN infrastructure, managing firewalls, switches, and routers.

• Implement and monitor network security policies, intrusion detection, and access control.

• Optimize network performance, troubleshoot connectivity issues, and ensure redundancy.

 Ensure Security and Compliance

• Implement cybersecurity best practices, monitor threats, and manage endpoint protection and vulnerability assessments.

• Ensure compliance with regulations (e.g., HIB).

• Conduct security audits and enforce policies on user access, encryption, and authentication.

Documentation and Reporting

• Create and maintain network documentation, including network diagrams, configurations, and procedures.

 On Rotating Roster

• Provide standby support during off-office hours and weekend on a rotational basis.

 Ad-Hoc Assignments

• Carry out any other tasks assigned by the supervisor or RO.

Job Requirements

• Bachelor’s degree in information technology or related field.

• With networking, system and security certifications such as CCNA, CCNP, CCIE, Microsoft certified Azure Solutions Architect and/or Windows Server Administrator, CISSP, CISM and CompTIA Security.

• At least 5 years of experience providing systems, network and cybersecurity operational support.

• Must have hands-on experience with servers, network and security devices, firewall, switches, routers, load balancers and wireless solutions.

• Within experience in at least 5 of the below technologies:

  • Windows Server environments, including installation, configuration, maintenance, and troubleshooting.

  • Managing and maintaining Active Directory, including user and group management, Group Policy, and domain services.

  • Nutanix Hyper-Converged Infrastructure (HCI) or equivalent technologies, including deployment, configuration, and management of Nutanix clusters.

  • NAS systems such as Synology, including RAID configurations, storage pools, volume management, and monitoring storage health.

  • Deploying, configuring, and managing Backup & Replication solutions such as Veeam.  Experience with backup strategies, disaster recovery, and data restoration.

  • SQL Server backups technologies such as Redgate, including configuring backup schedules, performing restores, and ensuring data integrity.

  • Network monitoring tools such as SolarWinds, including setting up and managing network and server monitoring, creating alerts, and troubleshooting performance issues.

  • Managing privileged accounts, including password rotation, session management, and auditing using PAM tools such as Password State and CyberArk.

  • Vulnerability scanning and assessment technologies such as Nessus and OpenVAS, including configuring scans, analysing results, and implementing remediation plans.

  • Microsoft Entra for identity and access management, including integration with Azure AD, managing user identities, and ensuring secure access to resources.

  • Cloud platforms such as Azure, AWS and/or GCP.

Working with a large financial institution, As a Cloud Engineer, you will play a key role in building and maintaining scalable, secure, and cost-efficient cloud environments. You'll collaborate with software developers, DevOps, and IT teams to ensure smooth deployment and operation of systems on the cloud.

Key Responsibilities

• Design, implement, and manage cloud infrastructure (AWS / Azure )

• Automate deployment, scaling, and monitoring of cloud resources using Infrastructure as Code (Terraform)

• Troubleshoot and resolve issues related to cloud performance, availability, and security

• Implement CI/CD pipelines to streamline application delivery

• Manage cloud networking, identity and access management (IAM), and backup/disaster recovery strategies

• Monitor system health, cost usage, and optimize cloud spending

• Collaborate with development teams to ensure cloud-native best practices

Required Skills & Experience

• 3+ years of hands-on experience in cloud engineering or related roles
• Experience with Infrastructure as Code (Terraform, Pulumi, or CloudFormation)
• Familiarity with containerization and orchestration (Docker, Kubernetes, ECS, or AKS)
• Strong knowledge of at least one major cloud provider (AWS, Azure, or GCP)
• AWS (EC2, VPC, IAM, RDS, Lambda, etc.) or Azure (VMs, VNets, Azure AD, App Services, etc
• Experience with scripting such as powershell, python or bash

Interested candidates please email your latest resume to subagio@tangspac.com

Responsibilities:

• In charge of managing and supporting planning and procurement of medical, non-medical equipment, and furniture
• Plan and lead user workgroups by organising regular meeting sessions, setting goals and targets, facilitating useful and productive discussions, guiding user departments, as well as reviewing performance indicators and work plans
• Responsible for budgetary planning and control, ensuring that the development keeps within budget
• Work closely with user department and various stakeholders in the preparation of medical, non-medical equipment and furniture specifications for tenders
  Provide recommendation to users based on technical compliance of medical, non-medical equipment and furniture in tender submissions
• Attach to Group team to familiarise with Group BME policies and procedures through supporting the daily operations to align with organisation and regulatory requirements
• Liaise and manage external contractors on service and tender commitment issues Provide technical advisory to end users and senior management on medical, non-medical equipment and furniture related issues
• Perform any other duties as assigned

Requirements

• Min Diploma in Electronics or relevant Engineering
• Min 5 years of experience in service and maintenance of medical equipment.
• Experience in Healthcare/Hospitals

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of performing quality assurance functions with regard to the product, process and maintain quality management system while ensuring compliance with all customers’ requirements
• Responsible for reviewing and revising quality procedures and quality control instructions
• Liaise with customers / vendors / suppliers on non-conformance activities, perform root cause analysis and determine effective corrective actions to reduce or eliminate the cost of poor quality
• In charge of performing internal audits to evaluate quality system, products, and processes
• In charge of performing vendors’ and on-site audits as required
• Drive down monthly Cost of Poor Quality/ scrap

Requirements:

• Degree in Mechanical / Aeronautical Engineering / other relevant disciplines
• Minimum 2 years of experience in Quality Management System and NADCAP

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of developing and implementing new optic / illumination components/system
• Responsible for designing and developing automated visual inspection systems for a full range of semiconductor equipment. 
• In charge of resolving existing optical/illumination issues within the equipment.
• Identify necessary and desirable improvements for vision optical system performance.

Job Requirement:

• Minimum Degree in Optics Engineering, Physics, Photonics, or a related field is required.
• Minimum with 5 year working experience in optical design software, alignment, testing, and high magnification optics.
• Knowledge of LED illumination systems, lenses, specifications, design trade-offs, and basic optics modeling techniques
• Experience in 2D drawing

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

• Understand contract and scope of work (i.e. SOW) and extracting the contract requirement into the checklist.
• Follow up FEED, P&IDs developed by consultant.
• Able to perform equipment sizing for pump required flow rate and pumping head together with NPSH verification.
• Able to perform piping line sizing.
• Able to develop system UFD/PFD.
• Able to create System Process Data Sheet.
• Develop/Update FPSO Hull common system related Topside, Safety, Hull marine systems in P&ID.
• Well understanding of common Class requirement such as ABS, LR and DNV Rules for marine system design.
• Well understanding of Equipment Isolation Philosophy and Specification from client.
• Well understanding of common piping material selection and application for marine system design as reference to International Standard.
• Able to incorporate the recommendations from the safety studies into the P&IDs and other relevant documents
• Able to review/comments technical proposal and vendor certified documents (VCD) from vendor (i.e. control valves specifications, PSVs specifications, etc.)
•  Liaise with other discipline for relevant information that are needed for process design.

• Able to understand safety related drawing & documents (e.g. Safety Plan, Area Classification, Safety Signaling, Technical Specification for safety equipments, HSE Manual, Hydrant Location Study etc).

• Understand P&IDs and other related process, safety & instrumentation items
• Well understanding of the galvanic corrosion phenomena in the system design and able to avoid or resolve the galvanic corrosion related problems.
• Define control narrative and alarm set point for the instruments.
• System descriptions & all other kind of OIM (operation & maintenance manual)
• Sizing calculations (i.e. PSVs calculation, BDV calculations, SDV calculation, Control valves calculation)
• Carry out Hull Process related studies and prepare official report.
• Good knowledge in process simulation (PRO-II / HYSYS process simulator)
• Familiar System Design Safe Chart, Cause & Effect Matrix, Narrative Control Logic.
• Having knowledge to evaluate the relevant safety studies in FPSO design (i.e. HAZOP, HAZID,Radiation Study, Fire Explosion Study).
• Understanding of Working Environment Requirement and Human Ergonomic Design.
• Support commissioning activities and troubleshooting of system performance related issues.
• Able to perform Hull Process related activities with no or minimum supervision.

Requirements:

• Min.Bachelor Degree in Chemical or Mechanical Engineering

• SPPID, PRO-II / HYSYS Process Simulator, Flowmaster, AutoCAD, MS Office

• Prefer to have at least 5 years of Hull Process engineering related working experience or similar activities as describe above
• Prefer to have experience in FPSO project, both topsides & marine.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building

Our Address and Working Hours:

Tuas Boulevard Yard

80 Tuas South Blvd, Singapore 637051

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.