Total 27 procurement engineer job vacancies in Batu Kawan, Pulau Pinang

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Perform failure analysis, root cause investigation, and fault isolation on SSD products during NPI, qualification, and mass production phases using test logs, diagnostic tools, and hardware analysis techniques. 

• Debug hardware and manufacturing-related failures by analyzing tester logs, power rails, NAND, DRAM, controller behavior, and interface issues to drive corrective and preventive actions. 

• Collaborate with cross-functional teams including Product Engineering, Process Engineering, Quality, Manufacturing, and Suppliers to resolve yield, process, and test related issues. 

• Develop and maintain debug procedures, cookbooks, troubleshooting guides, debugging tools, and knowledge databases to improve diagnostic accuracy, turnaround time (TAT), and operational efficiency. 

• Generate technical reports and present failure findings, corrective actions, and yield improvement recommendations to management and stakeholders while supporting continuous improvement initiatives. 

This position is designed for a skilled software engineer with deep expertise in manufacturing environments. At the core of this role is the active, hands-on programming of the critical interfaces that drive our production. Acting as a key link to our central department in Germany, you will be responsible for translating strategic objectives into robust software and optimized manufacturing processes. We are looking for a full-stack developer who not only designs solutions but takes ownership of the end-to-end technical implementation, bringing a passion for improving complex production systems.

Core Responsibilities

• Hands-On Software Development: Take direct ownership of the practical programming, implementation, and maintenance of mission-critical software interfaces, particularly between our MES and SAP systems. 
• Manufacturing Process Conception & Optimization: Leverage your extensive, multi-year manufacturing experience to design, analyze, and continuously optimize material flow and factory control processes.
• Execution of Centralized Goals: In close collaboration with the team in Germany, you will take ownership of strategic goals and be responsible for translating them directly into technical solutions for our global production network.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• You will work as SiP (System In Package ) package integration engineer in packaging engineering group. Leads new SiP product development from concept design and qualification to mass production. Generate innovative product concepts and transform them into tangible, market-ready products.
• Work closely with global functional teams in US, India, China, and Taiwan, review feasibility design drawings and propose design options. Collaborate extensively with internal teams, validate design options through characterization builds, perform comprehensive DFx (Design for x) analysis, Product performances , Quality , Cost , Manufacturability and etc, as well as review mechanical and electrical simulations, initiate assembly process flow, and deliver most optimized design for manufacturing with yield and quality.
• Ensuring build readiness, execute package qualification plan, follow up package reliability status, investigate and close failures on time. Monitor assembly and test yield on engineering/customer sample and low volume production builds. Drive yield improvement and manage excursions.
• Lead new product from low volume to high volume production transition with yield and quality meeting goals. Ensure FMEA, SOD, Control Plan, recipe guideline, SPC and other assembly controls are ready prior to high volume production.
• Lead new technology transition (new wafer tech/process/material) from engineering stage to volume production.

• Overall responsibility of Bosch semiconductor product and lead plant-specific simultaneous engineering team consisting of test engineer, process engineers for:
  • achieving quality, cost, delivery targets. Implementation of cost saving measures.
  • achieving yield targets, analyzing conspicuous lots and defining further actions for the lots
• Participation in lead-plant engineering meetings, discussions and stand in for plant specific interests. Reporting on plant specific topics and KPIs regarding products.
• Ensure implementation and coordination of product and process new product releases and related changes.
• Ensure ramp-up / ramp-down of products, including engineering trials and sample production.
• Responsible for Test data analysis, statistical analysis for yield improvement, lot evaluation and evaluation of customer returns. Root cause analysis of failure parts.
• Analysis of issues related to product and test system combinations.
• Issuing concessions, risk assessments, engineering change requests in cooperation with leadplant. Responsible for plant specific product documents.
• In case of quality issues, responsible for implementation of containments, root cause analysis and definition/implementation of corrective actions.
• Participation in Cost Savings Meetings.
• Responsible for the whole process chain of a product.
• Definition of criteria for active lots of release in cooperation with leadplant.
• Coaching/Training of Operators.
• Execute any other related duties assigned by immediate supervisor from time to time.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Develop/Characterize, validate & verify new process dev for NPI products to successful qualify 
• Design and develop processes to optimize efficient process flow, reduce process or product variability, improve process capability 
• Develop process improvements for high efficiency and cost effectiveness 
• Develop and maintain process optimization and validation programs 
• Evaluate current processes and provide recommendations 
• To review & buyoff process CTQs data, PFMEA, control plan, SPC 
• To work close with design team for new packing/giftbox construction relate to process window/guideline 
• Sustaining production process/assembly engineering management: Yield/Cycle time/production efficiency CIP 
• Cost saving initiative from product and process introduction 

• Develop and optimize burn-in test procedures for semiconductor devices, components, or systems.
• Support on Designing burn-in boards, fixtures, and test hardware.
• Analyze burn-in data to identify failure trends and root causes.
• Define burn-in conditions (temperature, voltage, duration, stress levels) according to product requirements.
• Troubleshoot hardware and process issues in burn-in operations.
• Support qualification and reliability testing (HTOL, HAST, temperature cycling, etc.).
• Ensure compliance with industry standards (JEDEC, MIL-STD, IPC).
• Automate data collection and reporting for yield and reliability analysis.
• Develop, program, and optimize AOI inspection programs for PCB assemblies.
• Set up and maintain AOI equipment (2D/3D inspection systems).
• Analyze defect data and improve detection capability while reducing false rejects.
• Troubleshoot AOI hardware, software, and vision-related issues.
• Support new product introduction (NPI) by creating AOI programs and validation plans.
• Monitor AOI performance metrics (FPY, false call rate, escape rate).
• Drive continuous improvement to reduce cost, cycle time, and failure rates.
• Responsible for pre-acceptance and release machines incl. support in setup, fine tuning, sustaining and maintenance.
• Mechanical, electrical alignment of the equipment according to supplier specification
• First contact person regarding appointments with equipment suppliers and regarding questions of the equipment suppliers. Monitoring of due dates. Technical discussions with supplier, engineering.
• Develop measures to reduce failures, to improve quality and output and to reduce costs together with the engineering
• Support improvement activities: Actively cooperate in improvement projects, bring in suggestions to improve production KPIs, like CT/ Output, Yield/OEE, Budget/Cost, reduce failures (MTBF, MTTR, down times) and improve quality
• Support and train Operators/Technician (as per Work Instruction) and execution of maintenance activities.
• 8D responsibility and hold lots dispose
• Align all changes with lead plant engineering
• Support FMEA and Control Plan
• Ensure spare part availability
• Execute any other related duties assigned by immediate supervisor from time to time. 

ESSENTIAL DUTIES AND RESPONSIBILITIES 

In this position, you will work in the Material Engineering team within the Packaging R&D organization who owns and deploys best-in-class material engineering solutions to the top-edge product and technology development across advanced semiconductor packaging, flash memory product and host levels. Your essential duties and responsibilities include:

• Drive advancement in packaging materials by addressing material-related design and process challenges. Develop solutions to support next-generation package requirements, including smaller form factors, thinner die, higher interconnect density, increased power, and enhanced reliability.
• Lead the evaluation, development, and qualification of advanced packaging materials for both product development and high-volume manufacturing. Ensure compliance with industry standards and sustain high material quality to enable reliable, high-yield, and cost-efficient manufacturing.
• Responsible for material characterization, lab testing, and design of experiments (DOE) to simulate manufacturing processes and use-condition failure. Analyze thermal, mechanical, and environmental performance to ensure materials meet reliability and performance targets.
• This position will interface with package and product design (in particular, thermal and mechanical), reliability, failure analysis, assembly R&D, and process teams to define material requirements and solutions. Collaborate with suppliers to develop, optimize, and qualify materials for successful production integration.

We are seeking a highly skilled and innovative senior engineer to lead our technical team in bringing new products to market within a dynamic environment. In this role, you will lead and contribute to the development and implementation of advanced test engineering strategies for our cutting-edge storage products. Below are the key responsibilities:

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Optimize Test Strategies: Design and execute efficient test plans, test time, yield, and quality to meet factory financial goals. Identify cost-effective testing methods through troubleshooting, validation, and continuous improvement.
• Lead and Collaborate on Engineering Solutions: Lead and implement innovative engineering solutions while collaborating with cross-functional teams to ensure project success under competitive timeline.
• Champion Innovation and Cost Efficiency: Collaboratively integrate advanced testing technologies, research, and adopt cost-saving solutions like Test Time Reduction (TTR) and new test platforms, driving CAPEX reduction. Continuously improve test programs and test infrastructure to enhance product quality and reliability.
• Technical Expertise and Support: Provide leadership in electrical failure analysis (EFA), exploring new test method/EFA technique to address RMAs, production, reliability, and DPPM improvement. Analyze test results and deliver reports to stakeholders with actionable insights for improvement.
• Technical Communication and Documentation: Develop and deliver clear, concise technical reports and documentation, including EFA, work instructions, test equipment guidelines, test reports, and specifications.
• NPI Support: Lead NPI projects, ensuring smooth transfer of test technology to mass production.
• Knowledge Sharing and Mentorship: Mentor junior engineers, promote best practices, and facilitate knowledge transfer through technical training.

As a Test Engineer - Process, you will lead the Project improvement in Burn In area, and support execution and manufacturing issues related to Test Process, and continue improve manufacturing issues with new ideas from time to time through close collaboration across teams and disciplines. In addition, you'll drive Test Process improvements to make our systems more robust and scalable via systematic and proper tools.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Own and sustain burn-in manufacturing processes to ensure stable production performance.
• Monitor burn-in process health, yield trends, uptime, and quality indicators.
• Analyze yield excursions, failures, and process deviations using data-driven methodologies.
• Lead root cause analysis (RCA) and corrective/preventive actions (CAPA).
• Drive continuous improvement initiatives to improve burn-in efficiency, reliability screening effectiveness, and cost reduction.
• Provide timely disposition and technical support for production issues impacting shipment and manufacturing flow.
• Support lot handling, disposition decisions, and recovery actions during abnormal events.
• Support qualification and release of new products into burn-in manufacturing.
• Partner closely with product managers, NPI engineers, Assembly engineers, Manufacturing supervisor and QA to scope, plan, design, and build new features as well as maintain existing functionality.
• Generate and maintain SOPs, OCAPs, FMEA, control plans, and engineering documentation.
• Ensure compliance with manufacturing standards, ESD requirements, and quality management systems
• Participate in audits and customer quality reviews as required.
• Leverage your experience and knowledge to grow your teammates’ technical breadth and depth through direct coaching and mentoring

We are seeking a highly skilled and innovative Staff engineer to lead our technical team in providing memory storage test solutions for new and existing products within a dynamic and high volume manufacturing environment. In this role, you will lead and contribute to the development and implementation of advanced test engineering strategies to ensure product performance, quality and manufacturing efficiency for our cutting-edge storage products. 

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Act as the primary technical owner for product performance in High Volume Manufacturing.
• Optimize Test Strategies: Design and execute efficient test plans, test time, yield, and quality to meet factory financial goals. Identify cost-effective testing methods through troubleshooting, validation, and continuous improvement.
• Lead and Collaborate on Engineering Solutions: Lead and implement innovative engineering solutions while collaborating with cross-functional teams to ensure project success under competitive timeline.
• Champion Innovation and Cost Efficiency: Collaboratively integrate advanced testing technologies, research, and adopt cost-saving solutions like Test Time Reduction (TTR) and new test platforms, driving CAPEX reduction. Continuously improve test programs and test infrastructure to enhance product quality and reliability.
• Technical Expertise and Support: Provide leadership in electrical failure analysis (EFA), exploring new test method/EFA technique to address RMAs, production, reliability, and DPPM improvement. Analyze test results and deliver reports to stakeholders with actionable insights for improvement.
• Technical Communication and Documentation: Develop and deliver clear, concise technical reports and documentation, including EFA, work instructions, test equipment guidelines, test reports, and specifications.
• NPI Support: Co-lead NPI projects with NPI team, ensuring smooth transfer of test technology from LVM to mass production.
• Knowledge Sharing and Mentorship: Mentor junior engineers, promote best practices, and facilitate knowledge transfer through technical training.

We are seeking a highly skilled and innovative engineer to lead our technical team in bringing new products to market within a dynamic environment. In this role, you will lead and contribute to the development and implementation of advanced test engineering strategies for our cutting-edge storage products. Below are the key responsibilities:

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Optimize Test Strategies: Design and execute efficient test plans, test time, yield, and quality to meet factory financial goals. Identify cost-effective testing methods through troubleshooting, validation, and continuous improvement.
• Lead and Collaborate on Engineering Solutions: Lead and implement innovative engineering solutions while collaborating with cross-functional teams to ensure project success under competitive timeline.
• Champion Innovation and Cost Efficiency: Collaboratively integrate advanced testing technologies, research, and adopt cost-saving solutions like Test Time Reduction (TTR) and new test platforms, driving CAPEX reduction. Continuously improve test programs and test infrastructure to enhance product quality and reliability.
• Technical Expertise and Support: Provide leadership in electrical failure analysis (EFA), exploring new test method/EFA technique to address RMAs, production, reliability, and DPPM improvement. Analyze test results and deliver reports to stakeholders with actionable insights for improvement.
• Technical Communication and Documentation: Develop and deliver clear, concise technical reports and documentation, including EFA, work instructions, test equipment guidelines, test reports, and specifications.
• NPI Support: Lead NPI projects, ensuring smooth transfer of test technology to mass production.
• Knowledge Sharing and Mentorship: Mentor junior engineers, promote best practices, and facilitate knowledge transfer through technical training.
   

We are looking for a curious and motivated Junior Data Management Engineer with foundational experience in machine learning, Computer Vision and GenAI  to join our growing data team. This role is perfect for someone early in their career who is eager to contribute to data engineering tasks while gaining hands-on exposure to machine learning workflows. You'll help ensure data pipelines are optimized for analytics and ML model development, supporting both operational and strategic decision-making. 

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Work with multiple stakeholders to identify, diagnose and resolve manufacturing process related problems such as quality excursions, manufacturing excellence and cost improvement. 
• Apply computer vision algorithms to inspect production lines for defects, improve yield, and enhance overall quality control. Leverage techniques such as object detection, image segmentation, and defect localization to identify issues early in the manufacturing process. 
• Build, train, and validate machine learning models to address complex manufacturing challenges, such as defect detection, process optimization, and performance prediction. 
• Able  to deploy trained models into production environments, including APIs, edge devices, or embedded systems. Ensure seamless integration with manufacturing systems and establish real-time monitoring for model performance. 
• Design and develop scalable GenAI applications using LLMs tailored to manufacturing use cases.

The Automation & Analytics team is seeking a highly motivated Software & AI Platform Engineer to help drive the next generation of intelligent factory solutions. In this role, you will contribute to the design, development, and evolution of in-house digital platforms that power automation, analytics, and AI-driven operations across semiconductor manufacturing environments.

Beyond traditional software and data engineering, this role focuses on enabling AI capabilities within operational platforms, including intelligent agents, real-time analytics, workflow automation, computer vision, and AI-assisted decision support. You will work closely with cross-functional engineering, manufacturing, automation, and operations teams to build scalable systems that support the Factory of the Future vision.

This position is ideal for individuals passionate about software engineering, AI systems, industrial digitalization, and building impactful technologies that bridge manufacturing operations with advanced analytics and generative AI.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

• Design, develop, and maintain scalable software platforms supporting factory automation, analytics, and AI applications.
• Build and optimize data pipelines, APIs, and backend services for structured and unstructured manufacturing data.
• Contribute to the integration of AI capabilities into operational platforms, including machine learning, generative AI, intelligent agents, and workflow automation.
• Collaborate with cross-functional stakeholders including engineering, manufacturing, automation, IT, and operations teams to deliver end-to-end digital solutions.
• Develop solutions that support real-time data processing, event-driven architectures, and streaming analytics environments.
• Participate in the development of AI-enabled applications such as conversational assistants, recommendation systems, anomaly detection, computer vision, or predictive analytics solutions.
• Ensure system reliability, scalability, data quality, and security through monitoring, testing, and documentation.
• Support platform interoperability through APIs, microservices, and integration frameworks.
• Contribute to software architecture discussions, technical roadmaps, and continuous improvement initiatives.
• Stay current with emerging technologies in AI, cloud-native systems, industrial automation, and software engineering best practices.

• Responsible as the line/process quality for the Sensors and ASICs production line. Ensure the line/process is complied with quality requirements. Interfacing with Process/ Equipment Engineer.
• Responsible for the product quality for Sensors and ASICs, internally and externally, including incoming product quality issues and customer issues. Interfacing with Product Engineer, Simultaneous Engineering (SE) Team, Central Customer Quality Engineer and/or Central Supplier Quality Engineer.
• Responsible to key in report, generate quality notification in SAP such as Q-Info, Delivery Release and QM-View.
• Responsible for the problem-solving coordination and moderation for the quality issue internally and externally as Problem Solving Expert.
• Responsible as the SPC coordinator for the Sensors and ASICs line.
• Support as PgP5 Internal Auditor, including audit execution, closing and effectiveness verification of audits focus on IATF 16949 and VDA 6.3.
• Support any external/customer audits, including follow-up and closing of related OPL.
• Support department 6S activity.
• Support change management 4M checklist verification.
• Support lessons learned activity. Sharing input to the lesson learned plant coordinator. 
• Support MSA study, including review of MSA study reported by Process/Equipment Engineer.
• Support Daily Leadership Meeting for any quality issue regarding Sensors and ASICs line.
• Responsible for return materials to supplier, including the improvement of the return process.
• Responsible for IB process for return material from customers.
• Responsible for continuous improvement in the area of responsibility.
• Execute any other related duties assigned by supervisor from time to time.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• As a Packaging Engineer, you will work in the Packaging R&D group on thermal designs across semiconductor packaging level, flash product printed circuited board assembly (PCBA) level, and host level.
• The ideal candidate will be responsible for thermal modeling (CFD) and validation of flash products PCBA using analytical/numerical analysis and measurement techniques.
• The focus will be on solutions to meet increased demands for small form factor packages with constrained physical and thermal environments.