Total 1,560 process development engineer job vacancies in Hong Kong

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

The Process Intelligence Engineer is responsible for designing, building, and maintaining Industrial & Systems Engineering data modeling and analytics solutions that support data‑driven decision‑making across logistics, supply chain, and manufacturing operations.

The role works closely with engineering and operations stakeholders to translate business questions into scalable reporting, analytical models, and actionable insights, supporting operational visibility, execution tracking, and continuous improvement across domain‑focused initiatives.

Key Responsibilities

Decision Intelligence & Analytics

• Work in cross‑functional teams to design and develop reporting solutions enabling data‑driven decisions for logistics, supply chain, and manufacturing teams.

• Partners with GIS, Engineering, and Operations teams to align process analytics initiatives with broader analytics and automation efforts.

• Develop and maintain dashboards, analytical data models, and KPI frameworks using Power BI, Tableau, or equivalent BI platforms.

• Build scalable ETL data pipelines for ingestion, cleansing, integration, and transformation of large datasets across SAP, Databricks, SQL data warehouses, and operational systems.

• Perform ad‑hoc statistical, diagnostic, and root‑cause analysis using SQL and Python to support business investigations.

• Interface with internal customers for requirements gathering; translate business problems into reporting specifications and analytical outputs.

• Create automated workflows to ensure timely refresh and reliability of datasets, dashboards, and scorecards.

• Generate reports, technical documentation, business presentations, and stakeholder communications for operations and leadership.

• Continuously evaluate visualization, and reporting technologies; recommend improvements for reporting efficiency, data quality, and automation.

• Provide guidance to team members on best data and process practices, visualization standards, metric definitions, and structured problem‑solving approaches.

• Enable descriptive to predictive modeling and predictive to prescriptive modeling using standard datasets to optimize warehousing.
  

Simulation & Decision Modeling Skills

• Applies statistical and scenario‑based simulation techniques to evaluate business outcomes, operational tradeoffs, and decision alternatives.

• Uses what‑if analysis, Monte Carlo simulation, sensitivity analysis, and probabilistic modeling to assess risk, variability, and performance impacts across key metrics.

• Supports capacity, demand, throughput, and service‑level analysis using historical data and modeled assumptions rather than detailed process‑engineering tools.

• Partners with engineering, operations, and analytics teams to frame simulation inputs, assumptions, and constraints aligned with real‑world execution.

• Communicates simulation results clearly through dashboards, visualizations, and narratives to support leadership decision‑making.

• Leverages Python, SQL, and analytical tooling to build lightweight, repeatable simulation models that integrate with BI datasets and reporting workflows.
  

Education & Experience

• Education: Bachelor’s degree required; Master’s preferred in Industrial & Systems Engineering, Computer Science, Business Analytics, Systems Engineering or a related field.

• Experience: 4–7 years of experience in process intelligence, analytics, dashboarding, or data‑engineering–adjacent environments.
  

Preferred Skills

• Strong proficiency in SQL and Python for analytics and problem‑solving.

• Expertise in Power BI, Tableau, or equivalent visualization tools.

• Experience with cloud and big‑data platforms (Azure, Databricks, Snowflake, AWS, GCP).

• Knowledge of ETL/ELT frameworks, data modeling techniques (star/snowflake schemas), and DAX or similar analytical expressions.

• Understanding Data automation, data refresh pipelines, and reporting governance.

• Strong communication, stakeholder management, and collaboration skills.

• Curious, analytical mindset with interest in operational analytics and continuous improvement.

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Responsibilities

• Responsible for set-up and optimization of new device qualification, engineering lot processing, process data gathering and reporting
• Monitor and improve device yield performance and process SPC charts
• Investigate and troubleshoot production downtime and quality issues to provide lot disposition on outlier lots
• Perform engineering report and documentation such as 8D, DMAIC, FMEA, CP, Process Specification, Work Instructions, etc
• Implement continuous improvement program (CIP) to support yield and cost improvement, including developing systems for workflow management
• Facilitate training of manufacturing personnel on operating procedures and process specification
• Work closely with inter-department to improve process and equipment performance and capability
• Coordinate and communicate with customers for any process engineering related matters
• Setup systems and NPI requirements, handles qualifications and engineering activities

Requirements

• Diploma / Degree in any Engineering Discipline
• Working experience in semiconductor assembly manufacturing or process engineering and pre-assembly processes (Backgrind, Laser Marking, Laser Groove, Wafer Dicing) is an advantage
• Knowledge in SPC, DOE, FMEA, OCAP, Control Plan, WI and Process Specification
• Clear and effective communication with customers, suppliers and cross department
• Able to multi-task and support ad-hoc projects in process and equipment related activities
• Entry level candidates are welcome to apply

Responsibilities:

• Develop, document, and support the fabrication of high-precision plastic injection tooling and molded components for manufacturing.
• Assist the Program team during new project quotations by providing accurate DFM (Design for Manufacturing) analysis to ensure tooling and product meet quality standards.
• Collaborate with customers on DFM and mold concept reviews, addressing technical requirements and concerns.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.
• Assist Production in molding process optimization, implementing manufacturing fixtures and automation to enhance reliability and efficiency.
• Support the Quality Team in designing and fabricating test and measurement fixtures.
• Coordinate mold trials, troubleshoot tooling and molded parts, and implement engineering changes to ensure smooth production with required quality standards.

Qualifications:

• Strong technical and analytical skills with a keen interest in problem-solving.
• Self-motivated team player with excellent interpersonal and communication skills.
• Experience or knowledge in engineering design, manufacturing processes, or tooling is an advantage.
• Proficient in 3D CAD or other engineering design software.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

EA Personnel: Nyon Hock Sen (Aden)

EA Personnel Reg No: R24124070

Position Summary

QA Engineer (Process Quality Control) is responsible to develop & deploy inspection procedures to ensure conformance of material to be released. Candidates with experience in semiconductor manufacturing environment are encouraged to apply for this position.

Key Responsibilities:

• Responsible for backend semiconductor packaging processes which ball drop, bumping, singulation, back grind and mounting.
• Effectively providing engineering support in order to meet production output, product quality, efficiency, productivity, yield, cycle time and safety requirements.
• Responsible to analyse the process data and identify improvement actions and work on the improvement.
• Drive permanent solutions to resolve chronic process and quality issues.
• Responsible to evaluate new product/material/process during the pilot run and ensure process readiness.
• Responsible for the relevance of the Work Instructions, Control Plan, FMEA & Process Control documents.
• Responsible to prepare the line for internal & external audits and the follow-up actions.
• Any other ad-hoc duties as assigned.

Requirements:

• Bachelor’s Degree in Engineering (Mechanical, Electrical, Materials, Chemical, or related field).
• Prior experience in semiconductor packaging processes (ball drop, bumping, singulation, back grind, mounting) would be advantageous.
• Experience in process engineering, yield improvement, and quality control.
• Proficiency in data analysis and statistical process control (SPC).
• Familiarity with Failure Mode and Effects Analysis (FMEA), Control Plan, and Process Control documentation.
• Hands-on experience with new product/material/process evaluations.
• Ability to work in a fast-paced manufacturing environment.

Job Responsibilities:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN. Provide guidance to junior Engineers.
• Setup and troubleshoot issues in recipes/ job files in all metrology tools within the Module.
• Analyze data from passed down to identify chronic process issues, establish improvement programs and lead engineers to resolve them. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Drive team to meet key indices of Uptime and OEE as per the goals set for these indices.
• Take on leadership roles to drive a small cross functional task team to address yield improvement/ excursion issues.
• Facilitate/ initiate CIP programs to optimize process window, cost, yield, and productivity. Establish plans and strategies to optimize process capability to meet operational requirements.
• Resolve complex technical issues in own Module or yield related issues
• Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications / documentation to meet TS16949 Quality Standard requirements.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics / Material Sciences / Mechanical
• Min 2 years of relevant work experience in Thin Film CMP Process and Wafer fabrication process.
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Description:

• Analyze SPC charts. Understand the rules and their significance. Perform proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Use JMP and Klarity ACE to analyze split lot, DOE data, and sort yield.
• Upload recipes using RMS, check recipes, and ensure recipe content compliance.
• Follow up on 3L5W, MRB, 8D, TECN, or update specifications through ECN. Provide guidance to junior engineers.
• Set up and troubleshoot issues in recipes/job files in all metrology tools within the module.
• Act as a process engineer for new equipment acceptance. Understand the concept of repeatability and reproducibility (R&R) run.

Requirements:

• PhD/Master/ Degree in Electrical/Electronics/Microelectronics/Chemical Process/Chemistry/Physics
• Excellent team player with good interpersonal, communication, and written skills
• Strong logical thinking capability and good analytical skills
• High level of integrity, commitment, with good ownership and accountability
• Able to adapt in a fast-paced environment and work under pressure
• Proficient in MS Office applications like Excel, PowerPoint, PowerBI

Job Description:

• Responsible for developing, testing, and improving premium connections and OCTG products during the development phase, ensuring they meet rigorous industry standards.
• Coordinating with customers and providing technical advice/training on the range of OCTG products, often involving rig field services.
• Executing validation tests (often in specialized, high-pressure, or high-temperature environments) to verify the integrity and performance of new designs.
• Planning, managing, and documenting test results for internal and client review.

Requirements:

• Min Diploma in Mechanical/ Manufacturing/ Precision Engineering, or equivalent.
• Minimum 3 years of experience in Oil and Gas, specifically with OCTG and downhole tools.
• Knowledge of ISO/API standards related to OCTG and connections. 

To submit your application, please apply online apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd.
EA License No: 17C8900

Job Summary

We are seeking a skilled Software Development Engineer to design, develop, and maintain scalable software solutions. The ideal candidate will work closely with cross-functional teams to deliver high-quality applications that meet business and client requirements.

Key Responsibilities

• Design, develop, test, and deploy software applications and systems

• Write clean, efficient, and maintainable code following best practices

• Collaborate with product managers, business analysts, and other developers to define system requirements

• Troubleshoot, debug, and enhance existing software

• Participate in code reviews to maintain code quality and consistency

• Develop and integrate APIs and third-party services

• Ensure application performance, scalability, and security

• Prepare technical documentation and system design specifications

Requirements

• Bachelor’s degree in Computer Science, Software Engineering, or related field

• Minimum 3–8 years of software development experience (adjust based on seniority)

• Proficiency in one or more programming languages (e.g., Java, Python, C#, JavaScript)

• Experience with frameworks such as Spring Boot, .NET, or Node.js

• Familiarity with databases (SQL / NoSQL)

• Experience with version control tools (e.g., Git)

• Understanding of software development lifecycle (SDLC) and Agile methodologies

• Strong problem-solving and analytical skills

Preferred Qualifications

• Experience with cloud platforms (AWS, Azure, or GCP)

• Knowledge of microservices architecture and RESTful APIs

• Familiarity with DevOps practices and CI/CD pipelines

• Experience in financial services or fintech industry (if relevant)

The Software Application Development Engineer is responsible for supporting the design, development, implementation, integration, testing, commissioning, documentation, maintenance, and operational support of software solutions and related services. The role includes developing software architecture, modules, services, APIs, interfaces, and integration mechanisms while ensuring the solution supports scalability, maintainability, and extensibility. The engineer will support Agile and DevOps delivery practices including sprint activities, continuous integration and deployment, configuration management, defect tracking, testing, and release management. The role also involves participation in system integration, operationalisation, testing, deployment, cybersecurity implementation, documentation, knowledge transfer, training support, and ongoing maintenance activities, while ensuring compliance with mandatory requirements, applicable laws, regulations, and project delivery obligations.

Preferred Technical Skills

Preferred experience or familiarity with:

• Software application development and system integration

• API and interface development

• Agile and DevOps delivery practices

• CI/CD, configuration management, and release management

• Testing, defect management, and deployment support

• Cybersecurity implementation and compliance support

• Technical documentation and knowledge transfer activities
  

  Singaporeans ONLY

  
  Working Location : East

  Candidates with aviation experience is preferred.
  

  **We regret to inform that only shortlisted candidates will be notified. Personal data collected will be used for recruitment purposes**

JOB DESCRIPTION

· Embedded system software development

· IoT related protocol and software development

· Peripheral device driver and Wi-Fi related software development

· Customer issues support

JOB REQUIREMENTS

· Bachelor’s degree or above in Computer Engineering, Electronics or Networking engineering

· Familiar with C/C++

· Familiar with embedded system and experience in driver-related development is an advantage

· Peripheral and Wi-Fi-related experience is an advantage

· Good communication and team working skills

Position Summary

The Engineer, Product Development is responsible for the development and establishment of new product and transfer process into production.

Responsibilities

• New product development as requested by customer and internal roadmap, and transfer into production
• New material, process & machine development and qualification, and transfer into production
• Troubleshoot process issues and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Establish, review and update specifications, workflow, quality and safety related documentation for new products and transfer to production line.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• Handle and manage customer audits and 8D reports.
• Any other ad-hoc duties as assigned.

Requirements

• Bachelor’s Degree in Materials Science, Microelectronics, Electrical, Chemical engineering or similar disciplines
• At least 3 years of experience in product development or NPI work in area of Wafer-level Fanout packaging production line or LCD/FPD production line, focusing on processes such as:

1. Die Preparation/ Recon
2. Lithography

• Knowledge in process engineering, process control engineering and yield enhancement
• Experience in DOE, FMEA, and 8D reports

OCTG Test & Development Engineer

Key Responsibilities:

• Working in development & testing projects under general supervision
• Peform analysis, modification and design of products and services for assigned projects which requires working knowledge of materials, components and their applications.
• Responsible for independent design, modification & analysis of connection technology related products
• Develops test procedures, conduct tests and completes test result analysis for assigned projects.
• Assists in planning and conducting tests on materials, components, subassemblies, and tools. Acquires working knowledge of test procedures and techniques with new Standards.
• Create / Modify / update the design as needed and process the engineering change request within defined time limits.
• Produce Manufacturing drawing which includes complex machining and assembly of test fixtures and perform drawing checks and sign off on work.
• Oversee Product testing, hold design and test reviews and write reports.
• Coordinate and with global teams on development & testing related activities.

Skills and Experience:

• At least 2 Years of product development and testing experience in Oil & Gas industry
• Understanding of thread and its calculations
• Experience in Finite Element Analysis (FEA)
• Experience in Solidworks tools

Qualifications:

Possess a Bachelor’s Degree in Mechanical Engineering or equivalent.

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Degree in Mechanical/Manufacturing/Aeronautical Engineering or equivalent.
• Minimum 3 years of working experience in MRO industry
• Knowledge of special processes such as Weldng (TIG/EBW), Thermal Spray, Heat Treatment, Machining will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900