Total 20 process development engineer job vacancies in Quality Assurance / Control category in Hong Kong

• Monitor and ensure manufacturing processes comply with quality standards and customer specifications.
• Perform process inspections, product verification, and quality control activities.
• Analyze quality issues, conduct root cause investigations, and implement corrective actions.
• Collaborate with engineering, production, and suppliers to improve product quality and operational efficiency.

Requirements:

• Diploma and above
• At least 2 years of experience in manufacturing, OEM, precision engineering,
• Knowledge of ISO 9001, quality assurance systems, and manufacturing quality processes.
   

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Monitor and ensure manufacturing processes comply with quality standards and customer specifications.
• Perform process inspections, product verification, and quality control activities.
• Analyze quality issues, conduct root cause investigations, and implement corrective actions.
• Collaborate with engineering, production, and suppliers to improve product quality and operational efficiency.

Requirements:

• Diploma and above
• At least 2 years of experience in manufacturing, OEM, precision engineering,
• Knowledge of ISO 9001, quality assurance systems, and manufacturing quality processes.
   

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Ensure adherence to quality standards, regulations, and compliance with government, aviation authorities, and customer requirements.
• Liaise with customers, vendors, and suppliers to address non-conformances, conduct root cause analysis, and implement corrective actions.
• Conduct internal audits to assess the quality system, products, and processes (ISO9001, AS9100, NADCAP).
• Review and update quality procedures and control guidelines regularly.

Requirements:

• Degree in Mechanical, Aeronautical Engineering or equivalent.
• At least 5 years of experience with ISO9001/AS9100 QMS and NADCAP standards.
• Strong knowledge in fishbone diagrams, FMEA, and 5-whys analysis.
• Capable of reading and interpreting technical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Develop and debug test programs for Digital, PMIC, RF & Mixed Signal products on ATE platforms (Advantest 93k – SmarTest 7/8, Teradyne UFLEX).
• Collaborate with design engineers on first silicon bring-up, device characterization across PVT, and production release.
• Perform digital vector debug (JTAG, SCAN, ATPG, Functional, MBIST) and characterize Mixed Signal IPs (ADC, DAC, PLL, etc.).
• Support production ramp-up, yield improvement, and test time optimization through cross-functional teamwork.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 2 years of Test Engineering experience, with hands-on skills in Teradyne UltraFlex or Advantest 93K ATE.
• Good knowledge of analog and digital electronics.
• Strong analytical and problem-solving skills, with a passion for hands-on work in a lab environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Manage the full spectrum of Quality Assurance and Quality Control activities, including equipment buy‑off (IBO and CBO) requirements and timely closure of internal and external CARS.
• Continuously review and update QA systems, workflows, and documentation; spearhead improvement initiatives to drive performance beyond compliance with standards.
• Drive supplier quality performance through audits, qualification, and re‑certification of vendors, supporting the company’s supply chain development efforts.
• Compile weekly and monthly QA reports, ensuring clear communication of quality performance and improvement actions across teams.

Requirements:

• Diploma in Mechanical, Production, or Mechatronics Engineering.
• At least 3 years of QA experience in a manufacturing environment.
• Proficient in metrology tools and techniques (e.g., Vernier Caliper, Micrometer, Height & Depth Gauge, Profile Projector, Gauge Block, Smart Scope) and problem‑solving methods such as 8D discipline, FMEA, and QC data analysis tools.
• Strong communication skills, detail‑oriented, proactive, and able to drive quality improvement programs independently while working effectively in a team.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Manage the full spectrum of Quality Assurance and Quality Control activities, including equipment buy‑off (IBO and CBO) requirements and timely closure of internal and external CARS.
• Continuously review and update QA systems, workflows, and documentation; spearhead improvement initiatives to drive performance beyond compliance with standards.
• Drive supplier quality performance through audits, qualification, and re‑certification of vendors, supporting the company’s supply chain development efforts.
• Compile weekly and monthly QA reports, ensuring clear communication of quality performance and improvement actions across teams.

Requirements:

• Diploma in Mechanical, Production, or Mechatronics Engineering.
• At least 3 years of QA experience in a manufacturing environment.
• Proficient in metrology tools and techniques (e.g., Vernier Caliper, Micrometer, Height & Depth Gauge, Profile Projector, Gauge Block, Smart Scope) and problem‑solving methods such as 8D discipline, FMEA, and QC data analysis tools.
• Strong communication skills, detail‑oriented, proactive, and able to drive quality improvement programs independently while working effectively in a team.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Develop and debug test programs for Digital, PMIC, RF & Mixed Signal products on ATE platforms (Advantest 93k – SmarTest 7/8, Teradyne UFLEX).
• Collaborate with design engineers on first silicon bring-up, device characterization across PVT, and production release.
• Perform digital vector debug (JTAG, SCAN, ATPG, Functional, MBIST) and characterize Mixed Signal IPs (ADC, DAC, PLL, etc.).
• Support production ramp-up, yield improvement, and test time optimization through cross-functional teamwork.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 2 years of Test Engineering experience, with hands-on skills in Teradyne UltraFlex or Advantest 93K ATE.
• Good knowledge of analog and digital electronics.
• Strong analytical and problem-solving skills, with a passion for hands-on work in a lab environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Develop and debug test programs for Digital, PMIC, RF & Mixed Signal products on ATE platforms (Advantest 93k – SmarTest 7/8, Teradyne UFLEX).
• Collaborate with design engineers on first silicon bring-up, device characterization across PVT, and production release.
• Perform digital vector debug (JTAG, SCAN, ATPG, Functional, MBIST) and characterize Mixed Signal IPs (ADC, DAC, PLL, etc.).
• Support production ramp-up, yield improvement, and test time optimization through cross-functional teamwork.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 2 years of Test Engineering experience, with hands-on skills in Teradyne UltraFlex or Advantest 93K ATE.
• Good knowledge of analog and digital electronics.
• Strong analytical and problem-solving skills, with a passion for hands-on work in a lab environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Manage the full spectrum of Quality Assurance and Quality Control activities, including equipment buy‑off (IBO and CBO) requirements and timely closure of internal and external CARS.
• Continuously review and update QA systems, workflows, and documentation; spearhead improvement initiatives to drive performance beyond compliance with standards.
• Drive supplier quality performance through audits, qualification, and re‑certification of vendors, supporting the company’s supply chain development efforts.
• Compile weekly and monthly QA reports, ensuring clear communication of quality performance and improvement actions across teams.

Requirements:

• Diploma in Mechanical, Production, or Mechatronics Engineering.
• At least 3 years of QA experience in a manufacturing environment.
• Proficient in metrology tools and techniques (e.g., Vernier Caliper, Micrometer, Height & Depth Gauge, Profile Projector, Gauge Block, Smart Scope) and problem‑solving methods such as 8D discipline, FMEA, and QC data analysis tools.
• Strong communication skills, detail‑oriented, proactive, and able to drive quality improvement programs independently while working effectively in a team.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Develop and debug test programs for Digital, PMIC, RF & Mixed Signal products on ATE platforms (Advantest 93k – SmarTest 7/8, Teradyne UFLEX).
• Collaborate with design engineers on first silicon bring-up, device characterization across PVT, and production release.
• Perform digital vector debug (JTAG, SCAN, ATPG, Functional, MBIST) and characterize Mixed Signal IPs (ADC, DAC, PLL, etc.).
• Support production ramp-up, yield improvement, and test time optimization through cross-functional teamwork.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 2 years of Test Engineering experience, with hands-on skills in Teradyne UltraFlex or Advantest 93K ATE.
• Good knowledge of analog and digital electronics.
• Strong analytical and problem-solving skills, with a passion for hands-on work in a lab environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Develop and debug test programs for Digital, PMIC, RF & Mixed Signal products on ATE platforms (Advantest 93k – SmarTest 7/8, Teradyne UFLEX).
• Collaborate with design engineers on first silicon bring-up, device characterization across PVT, and production release.
• Perform digital vector debug (JTAG, SCAN, ATPG, Functional, MBIST) and characterize Mixed Signal IPs (ADC, DAC, PLL, etc.).
• Support production ramp-up, yield improvement, and test time optimization through cross-functional teamwork.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 2 years of Test Engineering experience, with hands-on skills in Teradyne UltraFlex or Advantest 93K ATE.
• Good knowledge of analog and digital electronics.
• Strong analytical and problem-solving skills, with a passion for hands-on work in a lab environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996