Total 57 Junior Executive system technician job vacancies in Maintenance / Repair category in Hong Kong

Job Responsibilities

• Carry out electrical wiring works including cable pulling, cable trunking, conduit installation, and termination
• Install and wire electrical components such as switches, circuit breaker panels, and distribution systems
• Perform wiring connections ensuring proper system compatibility, safety, and functionality
• Read and interpret electrical drawings, wiring schematics, and control diagrams
• Assist in installation, testing, commissioning, troubleshooting, and maintenance of electrical systems and control panels
• Support engineers during inspection, rectification, and site coordination work
• Ensure all electrical works comply with safety regulations, project specifications, and quality standards
• * Maintain tools, equipment, and ensure good housekeeping at work sites

Job Requirements

• Minimum 2 years of experience in electrical wiring, panel wiring, or industrial site installation
• Certificate, Diploma, or equivalent qualification in Electrical Engineering or related field
• Able to read and understand electrical drawings, control diagrams, and wiring schematics
• Responsible, disciplined, and able to work independently as well as in a team
• Good attitude, teamwork, and communication skills
• Familiarity with industrial electrical systems or automation-related work is an added advantage
• Committed to safety, quality, and proper documentation
• Willing to work on-site at buildings, factories, plants, or customer locations
• Perform ad-hoc technical duties as assigned by supervisor or management
• Full-time (Fresh graduates may apply / considered)

Benefits:

• Working Time: Mon - Sat - 830am - 500pm
• EPF
• Socso
• Medical Allowance
• Salary: Negotiable

• CA Amalgamated Metal (M) Sdn Bhd
• Gaji Bersih: RM 1,700 – RM 2,500
• Waktu bekerja: Isnin – Jumaat, 8.30am – 6pm
• OT (bila diperlukan): Hari biasa (6pm - 8pm), Sabtu (8.30am-6pm), Ahad (8.30am-6pm)

Faedah

• EPF, SOCSO, dan EIS disediakan.
• Peluang OT tersedia.
• Peluang untuk menjadi sebahagian daripada pasukan perintis dalam operasi yang sedang berkembang.
• Persekitaran kerja yang positif dan menyokong.

Deskripsi Kerja

• Melaksanakan kerja mengikut pelan pengeluaran dan menyelesaikan tugasan pengeluaran yang diberikan.

• Mengendalikan mesin dan memantau proses pengeluaran untuk memastikan kualiti produk memenuhi keperluan.

• Bertanggungjawab terhadap mesin, peralatan, alat kerja dan jig, serta memastikan semuanya selamat dan berada dalam keadaan baik.

• Mengekalkan kebersihan dan susun atur tempat kerja mengikut piawaian 5S serta mematuhi semua prosedur keselamatan.

• Bersikap fleksibel dan mampu melaksanakan pelbagai tugas dalam proses pengeluaran apabila diperlukan.

• Bekerjasama dengan ahli pasukan dan mengurus tenaga kerja dengan berkesan untuk meningkatkan kecekapan pengeluaran.

• Melakukan penyelesaian masalah asas, pembaikan dan penyelenggaraan pencegahan peralatan apabila diperlukan.

• Menyokong dan mengambil bahagian dalam kawalan kualiti, penambahbaikan kualiti dan projek berkaitan pengeluaran.

• Mengambil langkah proaktif untuk mencegah kemalangan dan memastikan persekitaran kerja yang selamat di kawasan pengeluaran.

Kelayakan

• Calon mestilah memiliki sekurang-kurangnya SPM, SKM, Sijil Teknikal atau Diploma.

• Mampu berkomunikasi dalam Bahasa Malaysia dan Bahasa Inggeris asas.

• Graduan baharu atau calon yang mempunyai pengalaman berkaitan dalam persekitaran pembuatan adalah digalakkan untuk memohon.

• Memiliki lesen forklift yang sah adalah satu kelebihan tambahan.

• Calon yang mempunyai pengalaman dalam gudang atau pengurusan inventori dialu-alukan untuk memohon.

• Bertanggungjawab, boleh dipercayai dan mampu bekerja dengan baik di bawah tekanan.

• Pengalaman dalam mengendalikan peralatan dan proses pembuatan adalah satu kelebihan tetapi tidak diwajibkan.

• Bersedia untuk bekerja mengikut syif, lebih masa, pada hujung minggu dan cuti umum apabila diperlukan, serta mempunyai disiplin dan kehadiran kerja yang baik.

Calon yang berminat boleh menghantar resume anda ke:

• +6012-790 3698 (Whatsapp sahaja)
• james.loh@caamm.com.my

Perks & Benefits

• Medical
• EPF
• Sosco

Scope

Responsible for all indoor and outdoor repairing and servicing jobs. To ensure all jobs are done in an effective and efficient manner to meet Company’s short and long term objectives and to execute all jobs according to Company’s Values.

Responsibility:

• Responsible for ensuring all works performed are according to WECSB’s Standard Operating Procedure.
• To carry out all indoor as well as outdoor servicing and repairing jobs and to visit site when necessary.
• To ensure all pumps & equipments which need servicing and repairing are properly labelled, tagged and stored in allocated space.
• To work closely with sales and other departments to ensure all service and repairing jobs are completed as scheduled.
• To complete all service reports within stipulated time frame.
• To keep all service and repair jobs documentation in proper order.
• To ensure all in-house tools are properly maintained and proper housekeeping is being practiced in workshop at all times.
• To learn and improve on company’s product knowledge from time to time.
• Such other related duties as the management may direct.

Requirements

• Candidate must possess at least Secondary School/SPM/"O" Level,
• Higher Secondary/STPM/"A" Level/Pre-U, Professional Certificate in Mechanical / Electrical Engineering or equivalent.
• Required language(s): English and Bahasa Malaysia.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Basic electrical / mechanical knowledge for troubleshooting will be added advantage.
• Familiar with mechanical tools, i.e. welding equipment.
• Hardworking, reliable and positive working attitude.
• Must be willing to travel outstation when necessary.
• Possess valid driving licence.

Perks & Benefits

• Open culture
• Personal development opportunities
• 5 working days.
• Work Location : Penang, Butterworth
• • Able to start work immediately will be an advantage.

WE ARE WELCOME for any roles that related to Manufacturing CNC Machines.

Responsibilities:

• Setup independant machine and offset adjustment according to the drawing provided.

Requirements:

• Not necessary possess at any certificate exp like Diploma/Bachelor's Degree but priority and advantage if available.
• Related working experience will be an added advantage.
• Good command of language; both written and spoken in English and Bahasa Malaysia.
• Known about basic equipment caliper, micrometer and dial indicator.
• Motivated, willing to learn, hardworking, result-oriented and a team player.
• Good communication and interpersonal skills.
• Ability to work independently.
• Training will be provided.
• If you are able to programming and setup independently we may discuss furtherly for salary pay.
• Fresh graduates are encouraged to apply.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Attendance benefit
• Personal leave
• Panel Clinic
• EPF, Socso & EIS
• Personal development opportunities
• Remote work flexibility

工作職責

• 進行電氣線路施工，包括電纜敷設、線槽鋪設、導管安裝和端接。
• 安裝和連接電氣元件，例如開關、斷路器面板和配電系統。
• 進行線路連接，確保系統相容性、安全性和功能性。
• 能夠閱讀和理解電氣圖、接線圖和控制圖。
• 協助進行電氣系統和控制面板的安裝、測試、調試、故障排除和維護。
• 在檢查、整改和現場協調工作期間為工程師提供支持
• 確保所有電氣工程均符合安全規章、工程規範和品質標準。
• * 維護工具和設備，並確保工作場所的良好衛生狀況

職位要求

• 至少兩年電氣佈線、配電盤佈線或工業現場安裝經驗
• 能夠閱讀和理解電氣圖紙、控制圖和接線圖
• 責任心強，自律性高，既能獨立工作也能團隊合作。
• 良好的態度、團隊合作精神和溝通能力
• 熟悉工業電氣系統或自動化相關工作者優先考慮。
• 致力於安全、品質和規範的文檔記錄。
• 願意在建築物、工廠、車間或客戶現場工作
• 根據主管或管理階層的安排，執行臨時性技術任務。

好處

• 僱員公積金/社險
• 醫療津貼
• 年假
• 病假

工作細節

1. 工作時間：週一至週六，上午 8:30 至下午 5:00
2. 工作地點: Khean Huat Electrical Sdn Bhd, Bandar Perda, Bukit Mertajam, Penang
3. 教育背景：電機工程或相關領域的證書、文憑或同等學歷
4. 職位類型：全職（應屆畢業生亦可申請/考慮）
5. 薪資：面議

範圍

負責所有室內外維修保養工作。確保所有工作有效率地完成，以實現公司短期和長期目標，並按照公司價值觀執行所有工作。

責任：

• 負責確保所有工作均按照 WECSB 的標準作業程序進行。
• 負責所有室內外維修保養工作，並視需要到現場進行勘察。
• 確保所有需要維修保養的幫浦和設備都貼上正確的標籤，並存放在指定空間內。
• 與銷售和其他部門密切合作，確保所有服務和維修工作按計劃完成。
• 在規定的時間內完成所有服務報告。
• 妥善保管所有維修保養工作的相關文件。
• 確保所有內部工具都得到妥善維護，並始終在車間內保持良好的衛生習慣。
• 不斷學習並提升公司產品知識。
• 管理層可能指示的其他相關職責。

要求

• 候選人必須至少擁有中學/SPM/“O”水準學歷，
• 高中/STPM/“A”水準/大學預科，機械/電機工程專業證書或同等學歷。
• 所需語言：英語和馬來語。
• 該職位要求至少3年相關領域的工作經驗。
• 具備基本的電氣/機械故障排除知識將是加分。
• 熟悉機械工具，例如焊接設備。
• 勤奮、可靠、工作態度積極。
• 必要時需願意出差到外地。
• 持有有效駕駛執照。

福利待遇

• 開放文化
• 個人發展機會
• 5個工作天。
• 工作地點：檳城，北海
• • 能夠立即開始工作者優先考慮。

工作範圍：

• 對冷水機組運作進行例行檢查，包括冷凍水和冷卻水溫度，並檢查所有公用設施管線（水、壓縮空氣和天然氣）是否有洩漏。任何缺陷或問題必須立即報告給主管/部門負責人。
• 檢查並記錄壓縮機運轉參數，包括壓力、溫度、馬達電流（安培）、滑閥位置、馬達轉速、油位和運轉時間。
• 城鎮水樣本進行水質分析，包括城鎮水、飲用水、穀物用水和DPRS用水。
• 每日記錄水錶讀數。
• 如果發生跳脫或斷電事故，請前往故障工廠進行搶修。
• Handel氨冷水機故障排除隔離閥檢查洩漏區域並修復洩漏區域。
• 測量並記錄冷卻水塔（SA、RM、Nescafe 和冷凍水系統）的水電導率、pH 值和 ORP 值，並檢查和清潔水過濾器。
• 在操作冷水機組、冷卻水塔、壓縮機、氨氣或其他需要穿戴個人防護裝備的工作時，請遵守安全規程並穿戴適當的個人防護裝備。
• 如有任何事故或安全事件，請立即向主管/部門主管報告。

福利待遇

• 醫療保險
• 輪班津貼
• 隨著時間的推移

職責範圍：負責所有室內外維修保養工作。確保所有工作有效率地完成，以實現公司短期和長期目標，並按照公司價值觀執行所有工作。

職位描述

• 負責協助部門主管確保所有維修和服務工作。
• 各項工作均依部門標準流程及時完成。
• 現場檢查、檢查故障並為客戶泵浦的問題提供解決方案。
• 工作完成後，請確保所有報告和記錄都已更新。
• 必要時負責服務部門的物料計畫。
• 機械故障排除。
• 水泵大修工作。
• 執行維護檢查清單、預防性維護和糾正性維護。
• 製造工作。
• 根據需要執行其他職責和臨時任務。

要求

• 候選人必須至少擁有中學/SPM/“O”水準學歷，
• 高中/STPM/“A”水準/大學預科，機械/電機工程專業證書或同等學歷。
• 所需語言：英語和馬來語。
• 該職位要求至少3年相關領域的工作經驗。
• 具備基本的電氣/機械故障排除知識將是加分。
• 熟悉機械工具，例如焊接設備。
• 勤奮、可靠、工作態度積極。
• 必要時需願意出差到外地。
• 持有有效駕駛執照。

福利待遇

• 開放文化
• 個人發展機會
• 5個工作天。
• 工作地點：新山
• • 能夠立即開始工作者優先考慮。

Scope : Responsible for all indoor and outdoor repairing and servicing jobs. To ensure all jobs are done in an effective and efficient manner to meet Company’s short and long term objectives and to execute all jobs according to Company’s Values.

Job Description

• Responsible to assist Head of Department to ensure all repair and service
• jobs are completed in timely manner according to department standard of procedure.
• Site inspection, troubleshoot and provide resolution for customer pumps problem.
• Ensure all reports and records are updated after completion of work.
• Responsible for material planning for service department when necessary.
• Mechanical troubleshooting.
• Pump overhaul job.
• Carry out maintenance checklist, preventive and corrective maintenance.
• Fabrication job.
• To carry out any other duties & ad-hoc assignments as when needed.

Requirements

• Candidate must possess at least Secondary School/SPM/"O" Level,
• Higher Secondary/STPM/"A" Level/Pre-U, Professional Certificate in Mechanical / Electrical Engineering or equivalent.
• Required language(s): English and Bahasa Malaysia.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Basic electrical / mechanical knowledge for troubleshooting will be added advantage.
• Familiar with mechanical tools, i.e. welding equipment.
• Hardworking, reliable and positive working attitude.
• Must be willing to travel outstation when necessary.
• Possess valid driving licence.

Perks & Benefits

• Open culture
• Personal development opportunities
• 5 working days.
• Work Location : Johor Bahru
• • Able to start work immediately will be an advantage.

職責範圍：負責所有室內外維修保養工作。確保所有工作有效率地完成，以實現公司短期和長期目標，並按照公司價值觀執行所有工作。

職位描述

• 負責協助部門主管確保所有維修和服務工作。
• 各項工作均依部門標準流程及時完成。
• 現場檢查、檢查故障並為客戶泵浦的問題提供解決方案。
• 工作完成後，請確保所有報告和記錄都已更新。
• 必要時負責服務部門的物料計畫。
• 機械故障排除。
• 水泵大修工作。
• 執行維護檢查清單、預防性維護和糾正性維護。
• 製造工作。
• 根據需要執行其他職責和臨時任務。

要求

• 候選人必須至少擁有中學/SPM/“O”水準學歷，
• 高中/STPM/“A”水準/大學預科，機械/電機工程專業證書或同等學歷。
• 所需語言：英語和馬來語。
• 該職位要求至少3年相關領域的工作經驗。
• 具備基本的電氣/機械故障排除知識將是加分。
• 熟悉機械工具，例如焊接設備。
• 勤奮、可靠、工作態度積極。
• 必要時需願意出差到外地。
• 持有有效駕駛執照。

福利待遇

• 開放文化
• 個人發展機會
• 5個工作天。
• 工作地點：新山
• • 能夠立即開始工作者優先考慮。

職責：

• 操作、維護和排除工廠公用設施系統的故障，包括電力分配、壓縮空氣系統、冷凍水和冷卻系統、暖通空調、氣體供應、洗滌器系統和廢水處理廠 (WWTP) 設備。
• 進行水樣採集和基本實驗室測試（例如，pH值、COD、BOD、TSS），分析結果，並根據需要調整化學投加量，以確保符合標準。
• 確保生產線和關鍵設備公用設施的穩定持續供應。
• 監控公用設施運作並識別異常情況，以防止生產停機。
• 依主管安排，執行一般維護和雜務任務。
• 對所有設施和公用設備執行預防性維護（PM）活動。
• 在盡量減少對生產幹擾的情況下，進行故障排除和糾正性維修。
• 找出反覆出現的問題，並支持根本原因分析和糾正措施的實施。
• 在生產時間內提供現場技術支援。
• 對任何影響生產的設施相關問題及時作出反應。
• 從設施角度協助機器安裝、搬遷和調試。
• 確保符合環境、健康與安全、消防安全和監管要求。
• 遵守停機/啟動程序、工作許可製度和承包商安全準則。
• 支援內部稽核、客戶審計和監管檢查。
• 參與緊急應變情況（例如，停電、瓦斯外洩、火警、漏水）。
• 準確記錄維護情況、故障報告和公用事業消耗。
• 支持 5S 管理實踐，保持設施區域的良好衛生狀況。
• 為設施相關的緊急情況提供隨叫隨到或輪班支援。
• 執行公司指派的其他任何任務。

要求：

• 工程專業（電氣、機械、機電一體化或相關領域）最低文憑或證書。
• 至少有 1-3 年工廠設施、公用設施或維護環境的工作經驗。
• 具備電力分配、暖通空調、壓縮空氣、冷凍水和廢水處理系統等設施系統的基本知識。
• 具備對設備進行基本故障排除和維護的能力。
• 熟悉預防性維護（PM）措施和安全規程。
• 了解 EHS（環境、健康與安全）要求和監管標準者優先考慮。
• 能夠適應快節奏的製造環境並滿足生產需求。
• 願意在需要時輪班工作、隨叫隨到或在緊急情況下工作。
• 良好的團隊合作、溝通和解決問題的能力。
• 責任感強，自律性高，能夠在極少監督下獨立工作。

福利待遇

• 津貼
• 醫療保險
• 開放文化

Responsibilities:

• Operate, maintain, and troubleshoot factory utility systems, including electrical power distribution, compressed air systems, chilled water and cooling systems, HVAC, gas supply, scrubber systems, and wastewater treatment plant (WWTP) equipment.
• Perform water sampling and basic laboratory testing (e.g., pH, COD, BOD, TSS), analyze results, and adjust chemical dosing as required to ensure compliance with standards.
• Ensure a stable and continuous supply of utilities to production lines and critical equipment.
• Monitor utility performance and identify abnormalities to prevent production downtime.
• Carry out general maintenance and handyman tasks as assigned by the supervisor.
• Execute preventive maintenance (PM) activities for all facility and utility equipment.
• Perform troubleshooting and corrective repairs with minimal disruption to production.
• Identify recurring issues and support root cause analysis and implementation of corrective actions.
• Provide on-site technical support during production hours.
• Respond promptly to any facility-related issues affecting production.
• Assist in machine installation, relocation, and commissioning from a facilities perspective.
• Ensure compliance with EHS, fire safety, and regulatory requirements.
• Adhere to shutdown/startup procedures, permit-to-work systems, and contractor safety guidelines.
• Support internal audits, customer audits, and regulatory inspections.
• Participate in emergency response situations (e.g., power failure, gas leaks, fire alarms, water leaks).
• Maintain accurate records for maintenance, breakdown reports, and utility consumption.
• Support 5S practices and maintain good housekeeping in facility areas.
• Provide on-call or shift support for facility-related emergencies.
• Carry out any other duties as assigned by the Company.

Requirements:

• Minimum Diploma or Certificate in Engineering (Electrical, Mechanical, Mechatronics, or related field).
• At least 1–3 years of working experience in factory facilities, utilities, or maintenance environment.
• Basic knowledge of facility systems such as electrical distribution, HVAC, compressed air, chilled water, and wastewater treatment systems.
• Ability to perform basic troubleshooting and maintenance of equipment.
• Familiarity with preventive maintenance (PM) practices and safety procedures.
• Knowledge of EHS (Environment, Health & Safety) requirements and regulatory standards is an added advantage.
• Ability to work in a fast-paced manufacturing environment and support production needs.
• Willing to work on shifts, on-call, or during emergency situations when required.
• Good teamwork, communication, and problem-solving skills.
• Responsible, disciplined, and able to work independently with minimal supervision.

Perks & Benefits

• Allowance
• Medical insurance
• Open culture

Responsibilities:

• Perform highly diversified duties to install and maintain production machines.
• Provide emergency/unscheduled repairs of production equipment during production.
• Translate and interpret equipment manuals and work orders to perform required maintenance and service.
• Diagnose problems, replace or repair parts, test and make adjustments.
• Perform regular preventive maintenance on machines, equipment and plant facilities.
• Utilise a variety of hand and power tools, electric meters and material handling equipment in performing duties.
• Identify faulty operations, defective material and report those and any unusual situations to proper supervision.
• Adhere to safety regulations and maintain clean and orderly work areas.

Requirements:

• Proven experience as maintenance technician.
• Basic understanding of electrical, hydraulic and other systems.
• Familiarity of general maintenance processes and methods.
• Working knowledge of tools, common appliances and devices.
• Manual dexterity and problem-solving skills.
• Solid physical condition and strength with a willingness to work overtime.
• Minimum SPM/O level or equivalent; Certificate in HVAC, building maintenance technology or relevant field will be a plus.
• Certified Maintenance

Perks & Benefits

• Open culture
• Personal development opportunities

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Assistant Technician (Steel Fibre)
• Working Location: Gul Circle (6 minutes walk from CR24 MRT)
• Working Hours: 5.5 days (Mon-Fri 8am-5pm, Sat 8am-12pm)
• Salary Package: Basic Salary $2,500 + VB
• Duration: Permanent

Key Responsibilities

• Operate equipment to draw steel wire and produce steel fibers.
• Maximize efficiency by optimizing raw materials and consumables like wire rods, dies, and lubricants.
• Help prepare Manufacturing Procedure Specifications (MPS) and Quality Control Plans (QCP) for different products.
• Assist in developing a Maintenance Plan for the facility.
• Support product testing and identify necessary changes to meet product standards.
• Maintain and replenish raw material and consumable supplies to ensure ongoing production.
• Collaborate with the sales team to align delivery requirements with production capacity.

APPLY NOW!!!

• Completion of Secondary 4, GCE ‘N’ or ‘O’ levels, or ITE in Engineering (Electrical, Mechanical, or Mechatronics) is preferred.
• Familiar with operating and maintaining machinery.
• Knowledge of wire drawing consumables like dies and lubricants.
• Experience with steel wire drawing equipment and butt welding equipment for joining wires is a plus.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job@anradus.com.sg. Please indicate #74827 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

• Well Established Company
• Basic up to $3200 + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8am to 5.10pm

Job Responsibilities:

• Perform regular checks in inventory software system to ensure inventories are in place
• Perform regular repairs and maintenance of yard and workshop tools and equipment
• Help maintain the tool room through 5S initiatives and good housekeeping practices
• Any other ad hoc duties as assigned

Job Requirements:

• Possess relevant technical certification with minimum 1-2 years relevant working experience
• Possess Class 3 and forklift driving license will be an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492