Total 532 process development engineer job vacancies in Maintenance / Repair category in Hong Kong

• Perform preventive and corrective maintenance of amusement ride mechanical, electrical and control equipment, including adventure play equipment in Rainforest Wild Africa.
• Logs completion of maintenance inspections, corrective action and/or repairs made using maintenance system such as daily checklist and logbook.
• Ensure all maintenance activities are carried out in a safe and timely manner.
• Perform troubleshooting and recovery of Ride related faults and Adventure systems
• Accountability of tools and equipment and good housekeeping
• Any other related work as assigned.

Job Requirements: 

• Nitec/Higher Nitec/Diploma in Mechanical/Mechatronic/Electrical Engineering or related field of studies with 2-3 years in equipment maintenance preferred.
• Ability to read and interpret maintenance manual to carry out work assignment.
  Ability to perform shifts including weekends and public holidays.
• Able to work at height.
• Basic computer skills (MS office).
• Strong problem-solving and troubleshooting skills.
• Effective communication and ability to work independently and as part of a team.
• Good attention to detail and ability to work under pressure.
• Physically capable of lifting and installing of components
• Prior experience in amusement rides maintenance will be an advantage.

• Provide support in organizing and overseeing day-to-day facility upkeep to keep project activities on track.
• Coordinate project timelines and deliverables with clients, consultants, and subcontractors for timely completion.
• Perform on-site inspections to monitor work progress, conduct quality checks, and provide feedback for improvements.
• Support the preparation and submission of technical drawings and related project documentation.
• Handle administrative duties linked to project activities and provide on-site support when necessary.

Requirements:

• Diploma in Mechanical, Electrical Engineering, or equivalent
• At least 2 years of experience in the M&E/Construction Industry.
• Advantageous to have relevant safety certifications.
• Able to work independently and under tight deadlines.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to hr@recruit-expert.com

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R1326740

Start your career as a Maintenance Enginner / Senior Engineer at Vopak and be responsible for supporting the maintenance organization to develop & execute the 3-Year Maintenance Plan (3YMP) by translating this into a Preventive Maintenance (PM) program and Sustaining / Service / Growth Capex projects in order to keep the terminal in optimal condition. We offer you a working environment that is safe and pleasant and where equality, diversity and satisfaction are of paramount importance. Ready to develop yourself and make a positive impact? Improve the world and start as Maintenance Senior Engineer at Vopak.

What will you do as a Maintenance Engineer / Senior Engineer?

As a Maintenance Senior Engineer, you will interface with develop a 3-Year Maintenance Plan and Preventive Maintenance Program.You will also plan and execute sustaining and service / growth Capex, ensure maintenance Optimization and continuous improvement as well as troubleshoot technical problems, equipment, and system failures, conduct RCFA and develop improvement plan as needed.

What do we offer you?

• A market-based salary depending on your experience and knowledge and attractive bonuses
• Various growth opportunities

What do we expect from you as a Maintenance Engineer / Senior Engineer?

• Diploma / Degree in Engineering
• 3-5 years of experience in related field
• Exposure & experience in industrial standard (API, ASME and equivalent)
• Familiarity with API 653 and/or 570 is an advantage
• In depth knowledge of products, equipment in terminal
• Project & maintenance experience
• Strong data analysis acumen and ability to transform findings into opportunities for improvement.
• Good knowledge of maintenance, operations, safety and product knowledge.
• Knowledge of safety, health and environment regulations and practices

Your core responsibilities are:

• Responsible for developing the 3-year maintenance plan and consulted with the Maintenance Manager, Planner Maintenance and Supervisor Maintenance to get their input
• Responsible for identifying whether an asset requires preventive maintenance, based on risk assessments & asset criticality review, regulatory & statutory requirements, Vopak standards, maintenance policies and analysis of the maintenance history
• Responsible for determining and adjusting the required preventive maintenance for an asset: specifying what type of preventive maintenance must be performed on a regular basis, possible adjustments based on manufacturers’ instructions, legislation requirements, Vopak standard requirements and/or status of warranty
• Responsible for identifying with what frequency preventive maintenance work orders must be executed
• Responsible for establishing which default activities, standard procedures and required tools are needed as part of the preventive maintenance Work orders and consult with the Planner to get his input on the scope of work and default activities
• Responsible for adding a cost estimate to the PM schedule
• Responsible for identifying the information required in the inspection reports
• Responsible for terminal asset lifecycle management
• Identify Capex required based on business or sustainability needs of the terminal
• Study and develop scope of work & costs estimates
• Perform tenders for the Capex projects
• Execute the Capex projects in line with applicable Vopak standards such as Management of Change (MOC) and Vopak Project Management (VPM)
• Support on asset data management
• Carry out inspections to evaluate the quality of engineering works and / or the integrity of existing installations or structures, and make recommendations on the remedial works needed to ensure conformance with specifications and regulatory requirements
• Analyse inspection reports and proposes recommendations & action items via Work Out Of Inspection.
• Propose improvements / ideas for opportunities to achieve increased efficiency and productivity
• Perform maintenance analysis
• Perform relatively simple quality sampling and inspection of assets or processes (or both)
• Support and guide the technicians on more complex issues
• Determine root cause for equipment and system failures and recommend corrective measures
• Coordinate activities of subcontractors and suppliers and acting as a primary point of contact for them while working within an established contract management plan
• Facilitate internal and external audits as such authorities audits & customers’ audits
• Lead or support on corporate initiatives or pilot rollouts
• Training of Maintenance and Operations technicians

Benefits:

• Basic salary up to $2900
• Better Career Growth (MNC)
• Training provided
• Positions available for both hands on role and office work

Job Scopes:

• Assist in the maintenance, repair, and inspection of systems and components
• Perform troubleshooting, testing, and servicing of mechanical, electrical, and structural parts
• Support drafting, estimation, and documentation for project planning and execution
• Analyze technical specifications and assist in preparing reports and cost estimates
• Ensure compliance with safety standards and engineering guidelines
• Collaborate with teams to optimize system performance and operational efficiency
• Handle additional hands-on and office-based tasks as required

Job Requirements:
• Possess a Nitec, Higher Nitec, or Diploma in electrical or mechanical engineering related field.
• Candidates with no experience are welcome to apply, training will be provided.

To Apply, kindly click on the "APPLY NOW" button and job details.
We regret that only shortlisted candidates will be notified.

StaffKing Pte Ltd (20C0358) | Jasmine Wong (R22107578)

Responsibilities:

• Plan, monitor, and track all maintenance works to ensure ships’ operational readiness.
• Manage and track MRO (Maintenance, Repair & Overhaul) expenditures, including spares and material utilization.
• Act as the main point of contact for direct customers (ship, SREC, SSEC), maintaining strong relationships and clear communication.
• Lead and manage a team of technicians, engineers, and contractors to deliver high-quality, safe, and timely work.
• Conduct Vessel Safety Committee Coordination (VSCC) meetings during ship programs.
• Prepare and submit monthly management reports in a timely manner.
• Perform service acceptance for jobs completed by the Production Department.
• Review, check, and approve Work Orders raised by the Commercial Department.

Requirements:

• Diploma/Degree in Marine Engineering, Mechanical Engineering, Naval Architecture, or Electrical Engineering.
• Minimum 3 years’ experience in newbuild or ship repair projects preferred.
• Completion of the Ship Repair Manager Course is advantageous.
• Strong project management skills in planning, scheduling, costing, risk management, manpower management, and customer relationship management.
• Effective communicator with the ability to engage and work well with people at all levels.
• Familiarity with SAP software will be an advantage.
• Willingness to work onboard vessels and on weekends as required by project needs.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume.

EA License No: 13C6305

Reg. No.: R22104949 KOH SHI MIN, JOAN (XU SHIMIN)

For candidates who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Degree in Mechanical/Manufacturing/Aeronautical Engineering or equivalent.
• Minimum 3 years of working experience in MRO industry
• Knowledge of special processes such as Weldng (TIG/EBW), Thermal Spray, Heat Treatment, Machining will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Degree in Mechanical/Manufacturing/Aeronautical Engineering or equivalent.
• Minimum 3 years of working experience in MRO industry
• Knowledge of special processes such as Weldng (TIG/EBW), Thermal Spray, Heat Treatment, Machining will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description
1. Improve energy efficiency of existing buildings by analyzing, upgrading, and optimizing control systems to reduce energy consumption and operating costs.

Design, program, and modify Building Management Systems (BMS) and control strategies

2. Implement energy-saving measures such as scheduling, demand control, and setpoint optimization.

3. Conduct energy audits and performance assessments.

4. Perform system commissioning, testing, and validation.

5. Integrate smart meters, sensors, and automation technologies.

6. Monitor system performance and recommend continuous improvements.

7. Ensure compliance with energy efficiency standards and local regulations.

8. Prepare technical reports, documentation, and cost-benefit analyses.

9. Strong communication and teamwork skills.

10. Problem-solving mindset and willingness to learn.

11. Any other duties as and when assigned by management.

Job Requirements
1. Diploma or Degree in Instrumentation Engineering, Electrical Engineering, Mechanical Engineering (HVAC), or related field.

2. Minimum 3 years of experience in building automation, HVAC controls, or energy management.

3. Strong knowledge of BMS platforms.

4. Experience with PLC programming and control systems.

5. Understanding of HVAC systems and energy efficiency principles.

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Degree in Mechanical/Manufacturing/Aeronautical Engineering or equivalent.
• Minimum 3 years of working experience in MRO industry
• Knowledge of special processes such as Weldng (TIG/EBW), Thermal Spray, Heat Treatment, Machining will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of conducting and certify scheduled and unscheduled maintenance, repair, and testing of aircraft systems and components.
• Responsible for carrying out complex tasks such as engine servicing and component replacement, troubleshooting defects, and maintaining production equipment.
• In charge of performing detailed inspections of aircraft structures, landing gear, engines, and other critical systems.
• In charge of leading and supervising teams of technicians to complete maintenance tasks efficiently.
• Responsible in promoting and upholding a culture of safety among maintenance teams and ensure all activities comply with quality standards.
• Maintain detailed and accurate records of all maintenance activities and certifications.
• Ensure all work is performed in accordance with regulations from the Civil Aviation Authority (CAA) and the Original Equipment Manufacturer (OEM).

Job Requirement:

• Minimum Degree in Mechanical/Manufacturing/Aeronautical Engineering or equivalent.
• Minimum 3 years of working experience in MRO industry
• Knowledge of special processes such as Weldng (TIG/EBW), Thermal Spray, Heat Treatment, Machining will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Company location at Tuas, transport provided islandwide MRT locations.

Responsibilities:

• Perform preventive and corrective maintenance,inspections, and troubleshooting on DP-area equipment to ensure reliableoperations.
• Support equipment installation, commissioning, FAT/SAT,IOQ, and start-up activities, including resolving technical issues.
• Handle breakdowns, support audits, and assist indeviation investigations, CAPA, change controls, and risk assessments.

Requirements:

• Diploma/Degree
• 2 years with pharmaceutical industry
• Comfortable with shift work

Kindly email your resume in a comprehensive Word formatto jacqueline.goh@talentvue.com.sg

We regret to inform that only shortlisted candidates will be notified.

Please be informed that by applying for the advertisedposition, the candidate is considered to have given their consent for us tocollect, utilize, or disclose their personal information for the purposesrelated to the services we provide.

Jacqueline Goh

EA License Number: 22C1430

Registration Number: R1326664

• MNC (Manufacturing)
• Basic $2800 to $4500+ AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: North (SINGAPORE)
•  Working hours: 8.30am – 5.30pm (Mon – Fri)
• Boiler / Senior Boiler (2 positions available) 

Job Scope

• Operate and monitor steam boilers and related utilities equipment to ensure smooth plant operations.
• Conduct routine checks on boilers, pumps, valves, compressors, and steam systems.
  Monitor boiler pressure, temperature, water levels, and fuel supply to ensure safe operation.
• Perform preventive maintenance and troubleshooting on boiler systems and utilities equipment.
• Record operating data, maintenance activities, and system performance.
• Ensure compliance with Workplace Safety regulations and boiler operation procedures.
• Coordinate with maintenance and production teams to support plant operations.
  Assist in shutdown, inspection, and repair of boilers when required.

Requirements

• Boiler Attendant Certificate (BOA) / MOM Boiler Attendant Certificate preferred.
• NITEC / Higher NITEC / Diploma in Mechanical Engineering or related field.
• Minimum 2–3 years of experience operating boilers in manufacturing / plant environment preferred. 

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

POSITION SUMMARY

Working alongside the production team, the Lead Process Technician acts as the primary liaison between the Plant Manager and the Process Technicians. The incumbent is responsible for receiving operational briefings, coordinating the daily workflow among the team, and actively participating in plant operations to ensure processes are followed according to established procedures. This includes ensuring the accurate and thorough completion of batch documentation, and adhering to production schedules, safety protocols, and work instructions to ensure smooth and safe production.

JOB RESPONSIBILITIES

• Receive daily and weekly task briefings from the Plant Manager and coordinate the distribution of these tasks among the team based on production requirements and schedules to ensure efficient workflow.

• Actively operate and perform stages of chemical manufacturing activities alongside the team according to work instructions and safety measures.

• Ensure production records and related documents are accurately completed and submitted in a timely manner.

• Lead the team in ensuring the proper handling, storage, and disposal of materials, products, and chemical waste in line with company procedures.

• Monitor and maintain sufficient stock levels of consumables and packaging materials to support ongoing production activities.

• Promote and ensure compliance with all relevant legal, health and safety, and quality standards within the workplace.

• Coordinate with the team to ensure that all plant maintenance and calibration activities are completed promptly and correctly.

• Perform additional duties as required by management.

JOB REQUIREMENTS

• Min NITEC in Chemical, Engineering, Supply Chain, Logistics, or related fields.

• Minimum of 5+ years of accumulated working experience in operational environments such as general manufacturing, logistics, warehousing, or supply chain.

• Prior experience in chemical-related industries is advantageous but not required. Full on-the-job training for the specific chemical processes will be provided.

• Demonstrated maturity with proven track record of taking initiative, coordinating daily workflows, and acting as a reliable liaison between management and ground staff.

• Strong literacy in English, with the ability to accurately read and execute operational procedures and safety manuals. A deep, uncompromising understanding of workplace safety, health, and security practices.

• A responsible, self-motivated team player who thrives in a small-team environment and possesses a positive, hands-on attitude.

• Licensed forklift operator.

• Compliance to the Workplace Safety, Health & Security Policy.

• Report any incident, accident, near miss, occupational disease, dangerous occurrence, or suspicious risk associated with the threat of terrorism.

Role Overview

Your primary focus is to develop and execute an efficient maintenance plan that minimizes downtime through routine preventive tasks, including cleaning, lubrication, and sensor calibrationand the swift diagnosis of electrical, mechanical, or software faults. By optimizing vehicle routes and addressing corrective maintenance immediately, you will ensure seamless warehouse delivery performance and high operational efficiency.

Location : Tuas Biomedical Park with company shuttle bus provided islanded

Responsibilities

• Perform regular preventive maintenance including component inspection, cleaning, and lubrication to ensure equipment longevity.

• Diagnose and resolve complex electrical, mechanical, and software issues within AGV systems to minimize downtime.

• Monitor AGV performance and oversee system operations to maintain safety and efficiency within the warehouse environment.

• Collaborate with production teams to optimize vehicle routes and improve overall workflow efficiency.

• Maintain accurate records of all maintenance activities, system performance metrics, and incident reports.

• Ensure all operations remain in strict compliance with safety protocols and Good Manufacturing Practices (GMP).

• Work closely with warehouse personnel, the SEM automation team, and the CMMS system to streamline maintenance tasks.

• Maintain the flexibility to work overtime or varied shifts as required by operational needs.

• Execute any reasonable assignments or additional duties as directed by the Maintenance Lead or Department Head

Requirement :

• Diploma /Degree in Mechatronics, Robotics, or Mechanical/Electrical Engineering with a focus on automation.

• 1–3 years of experience in warehouse environments, specifically with ASRS or AGV maintenance.

• Prior experience with warehouse AHU/HVAC systems is highly preferred.

• Knowledge of industrial freezer operations and maintenance is an advantage.

• Strong analytical, problem-solving, and communication skills.

• Ability to work effectively in a fast-paced environment, including performing tasks at heights.

• A positive, proactive attitude and a strong commitment to team goals.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: jobs@recruitpedia.sg

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)