Total 2,716 system engineer job vacancies in Information Technology category in Hong Kong

About Ackcio

Ackcio builds wireless IoTmonitoring systems for geotechnical and civil infrastructure applications –deployed on construction sites, tunnels, slopes, and structures worldwide. Ourhardware products include the BEAM platform (Digital, Analogue, and VibratingWire Nodes), TM-L Tiltmeter, and GeoArray MEMS Inclinometer Array. As we scaleglobally, maintaining hardware quality, driving continuous improvement, andmanaging our contract manufacturer relationship are critical to our success.

About the Role

We are hiring a HardwareEngineer to own the full hardware quality loop – from RMA diagnostics andhands-on rework, through root cause analysis, to driving design improvementsthat feed back into production. This is not a pure bench technician role and nota pure design role. It sits squarely in the middle: you diagnose real-worldfailures, identify systemic issues, update schematics and BOMs, and work withour contract manufacturer (CM) to ensure changes land in production.

You will be the single point ofownership for returned hardware, and the bridge between field failures anddesign improvements. You need to be equally comfortable with a soldering ironand with Altium (or equivalent), and you must be able to communicate technicalfindings clearly – both internally to engineering and externally to our CM.

If you have worked in afast-moving, small-team environment where you had to figure things out withouta playbook – and you are energised by that kind of ownership – this role is foryou.

What You Will Do

RMA Diagnostics & Root Cause Analysis

• Receive, log, and triage returned devices fromcustomers globally
• Execute structured diagnostic routines to identify rootcause – distinguishing hardware faults, firmware issues, handling damage, andenvironmental failures
• Document all findings: failure mode, test results,probable root cause, and recommended disposition
• Identify recurring failure patterns across RMA batchesand escalate systemic issues

Hands-On Rework & Repair

• Perform component-level rework to a high standard: SMDsoldering, module replacement, connector repair
• Re-flash firmware on repaired units and validateagainst test criteria before return or redeployment
• Maintain a clean, traceable repair log for each unitprocessed
• Operate and improve existing test jigs for BEAM Nodesand sensor products

Design Improvement & Engineering Change

• Translate RMA findings into actionable improvementplans with clear problem statements, proposed fixes, and expected impact
• Update schematics to reflect approved design changes
• Update Bills of Materials (BOMs) to reflect componentchanges, alternates, or obsolescence replacements
• Work with the engineering team to review and validateproposed changes before release to production

Contract Manufacturer (CM) Interface

• Prepare and deliver structured reports to the CM ondesign changes, BOM updates, and quality findings
• Review CM build reports, first-article inspectionresults, and production yield data
• Coordinate with CM on engineering change orders (ECOs)and ensure changes are implemented correctly
• Support new product introduction (NPI) activities atthe CM as needed

Quality & Process

• Support pre-shipment QC checks and maintain the QCchecklist for new product releases
• Recommend and implement improvements to testprocedures, rework SOPs, and QC gates
• Maintain jig calibration records and flag anomalies

What We Are Looking For

Must Have

• Degree in Electrical or Electronic Engineering (orclosely related discipline)
• 3–5 years of hands-on experience in electronicsdiagnostics, repair, or test – ideally in a production, RMA, or NPI environment
• Strong SMD rework skills – fine-pitch components; BGArework experience is a plus
• Proficient with bench equipment: oscilloscope,multimeter, logic analyser, soldering station
• Ability to read, interpret, and update schematics andPCB layouts independently
• Experience with EDA tools (Altium Designerpreferred; KiCad, OrCAD, or Eagle acceptable) – specifically for schematicedits, BOM management, and design review
• Systematic fault-finding approach – you work through adiagnostic process, not just replace parts until something works
• Clear, structured documentation and reporting habits –your reports should be ready to send to a CM without editing
• Self-directed and proactive – you do not wait to betold what to fix next

Good to Have

• Prior experience interfacing with a contractmanufacturer (ECOs, build reports, yield analysis)
• Exposure to IoT or wireless hardware (LoRa, BLE, GPSmodules, embedded MCUs)
• Experience with UART, JTAG, or SWD debug interfaces
• Familiarity with DFM/DFA principles
• Experience in a startup or small-team environment whereyou wore multiple hats
• Experience writing or refining test procedures and workinstructions

How to Apply

• Send your CV and a short notedescribing:
• The most complex hardware fault you have diagnosed andresolved
• A design or process improvement you drove based onfailure analysis
• Send to: hr@ackcio.com

1. ETL Development

• Design, develop, and maintain end-to-end ETL/ELT processes using Azure Data Factory (ADF) and Azure Databricks.
• Write complex, high-performance T-SQL queries, stored procedures, and functions to transform raw data into actionable insights. Optimize data loads for performance and scalability within Azure SQL Database and Synapse Analytics.

2. Quality Assurance & Testing

• Develop and execute comprehensive Data Validation scripts to check for data completeness, transformation logic, and referential integrity. Conduct Source-to-Target mapping validation and performance testing on large datasets. Identify, document, and track data anomalies and bugs, working closely with the engineering team to resolve bottlenecks.

3. Infrastructure & Collaboration

• Work within an Agile environment, collaborating with Data Architects and Business Analysts to understand requirements. Manage version control and CI/CD deployments using Azure DevOps. Monitor pipeline health and set up automated alerts for failure or data drift.

Technical Requirements

SQL Mastery: Deep expertise in SQL (T-SQL/PL-SQL) for data manipulation, optimization, and complex joins.

Azure Data Stack: Hands-on experience with Azure Data Factory, Azure Data Lake Storage (ADLS), and Azure SQL Database. (Knowledge of Databricks/PySpark is a major plus).

Testing Tooling: Experience with data testing tools (e.g., dbt, Great Expectations) or custom Python/SQL testing scripts.

Cloud Infrastructure: Understanding of Azure environment security, Managed Identities, and Key Vaults.

Education: Degree in Computer Science, Information Technology, or a related field, plus 3–5 years of relevant experience.

Company Overview

Eriweld International Pte. Ltd. specializes in Lightning Protection solutions across diverse sectors including military, aviation, oil & gas, telecommunications, and more. With over 50 years of team experience, it leads Singapore’s market and serves regional projects with high-quality, standards-compliant products.

Job Summary

The Technology Engineer supports project managers by managing project documentation, coordinating technical procurement, supervising construction quality, and leveraging digital systems to ensure efficient project execution at Eriweld International.

Responsibilities

• Assist project manager in monitoring on-site progress and ensuring quality standards are met
• Attend site meetings to resolve technical queries from clients promptly
• Manage project administration by organizing and maintaining accurate documentation
• Oversee technical project operations including digital document control to ensure data integrity
• Coordinate procurement activities and verify material compliance with local and international standards
• Utilize digital platforms to track project status and manage resources effectively

Responsibilities

• Configure, maintain, and troubleshoot Fortinet and Juniper firewalls and switches to ensure network security and reliability
• Lead and manage network and security projects from initial planning through successful implementation and delivery
• Develop and deliver technical training sessions and presentations to team members and end-users to enhance knowledge and skills
• Build and maintain effective working relationships with clients and manage third-party vendors to support network operations
• Execute ad-hoc tasks assigned by management to support business and technical objectives

Required competencies and certifications

• Diploma or Degree in IT Networking or a related discipline
• Minimum 1 year of hands-on experience in a system integrator (SI) environment with network and security exposure
• Proven ability to configure and troubleshoot Fortinet and Juniper firewalls and switches
• Demonstrated capability to work independently under pressure with minimal supervision
• Strong analytical skills applied to network security and troubleshooting tasks
• Effective communication skills for technical and client interactions
• Experience implementing network security projects
• Willingness to work extended and after-office hours when required

Preferred competencies and qualifications

• Exposure to GPU servers, network analyzers, load balancers, or endpoint protection tools

Company Overview

TroyTech International Consulting Pte Ltd is a Singapore-based consulting firm specializing in SOA, EAI, JEE technical support, web and mobile solutions, and business integration with IBM and open source software. It serves Financial, Transportation, and Government sectors across APAC.

Job Summary

You will design and deliver high-performance back-office software solutions, collaborating with development teams and users to ensure robust application support and comprehensive documentation throughout the software development lifecycle.

Responsibilities

• Gather and analyze software requirements to align solutions with business needs
• Design, develop, and maintain high-volume, performance-intensive back-office software applications
• Prepare and submit comprehensive SDLC deliverables including Business Rules, Software Requirement Specifications, Architecture and Design documents, Interface Specifications, Source Code, Testing Specifications, and User Manuals
• Provide day-to-day application support to resolve operational issues promptly
• Liaise effectively with users to clarify requirements, design considerations, and testing feedback
• Apply Agile development methodologies to deliver iterative and incremental software improvements
• Implement DevSecOps and CI/CD practices to enhance software delivery and security
• Conduct unit, integration, and end-to-end testing to ensure system stability and reliability
• Utilize advanced SQL and star schema design techniques for database interfacing and optimization
• Apply data analytics techniques such as clustering, time series analysis, and anomaly detection to support data-driven decision-making
• Develop Python programs for data transformation and analysis using Pandas and Snowpark libraries
• Develop Java API microservices using Spring Boot framework (preferred)
• Design UML models to support clear and effective software documentation
• Work within AWS environments and leverage AWS Sagemaker for machine learning tasks (preferred)
• Create interactive dashboards using Streamlit or Tableau for data visualization (preferred)

Preferred competencies and qualifications

• Familiarity with AWS Sagemaker for machine learning workflows
• Skills in dashboarding libraries such as Streamlit or Tableau
• Experience in creating Java API microservices with Spring Boot

Key Responsibilities

• Design, develop, and maintain data pipelines, ETL/ELT processes, and data integration workflows.
• Architect and optimize data lakes, data warehouses, and streaming platforms.
• Work with structured, semi-structured, and unstructured data at scale.
• Implement real-time and batch data processing solutions.
• Collaborate with Data Scientists, Analysts, and Business stakeholders to deliver high-quality data solutions.
• Ensure data security, lineage, governance, and compliance across platforms.
• Optimize queries, data models, and storage for performance and cost efficiency.
• Automate processes and adopt DevOps/DataOps practices for CI/CD in data engineering.
• Troubleshoot complex data-related issues and resolve production incidents.
• Mentor junior engineers and contribute to technical strategy and best practices.

Technical Skills (Must-Have Tough Requirements)

Programming & Scripting

• Proficiency in Python, Scala, or Java for data engineering.
• Strong SQL skills (query optimization, tuning, advanced joins, window functions).

Big Data & Distributed Systems

• Expertise with Apache Spark, Hadoop, Hive, HBase, Flink, Kafka.
• Hands-on with streaming frameworks (Kafka Streams, Spark Streaming, Flink).

Cloud & Data Platforms

• Deep knowledge of AWS (Redshift, Glue, EMR, Athena, S3, Kinesis),
  or Azure (Synapse, Data Factory, Databricks, ADLS),
  or GCP (BigQuery, Dataflow, Pub/Sub, Dataproc).
• Experience with Snowflake, Databricks, or Teradata.

ETL/ELT & Orchestration

• Strong experience with Airflow, Luigi, Azkaban, Prefect.
• ETL tools like Informatica, Talend, SSIS.

Data Modeling & Storage

• Experience with Data Lakes, Data Warehouses, and Lakehouse architectures.
• Knowledge of Star Schema, Snowflake Schema, Normalization/Denormalization.

DevOps & Automation

• Proficiency in CI/CD (Jenkins, GitLab, Azure DevOps) for data pipelines.
• Experience with Docker, Kubernetes, Terraform, Ansible for infrastructure automation.

Other Tough Skills

• Strong knowledge of Data Governance, MDM, Data Quality, Metadata Management.
• Familiarity with Graph Databases (Neo4j), Time-Series Databases (InfluxDB, TimescaleDB).
• Understanding of machine learning data pipelines (feature engineering, model serving).

Qualifications

• Bachelor’s/Master’s degree in Computer Science, Data Engineering, or related field.
• 7–10 years of experience in data engineering or big data development.
• At least 2–3 large-scale end-to-end data platform implementations.
• Preferred Certifications:
  AWS Certified Data Analytics – Specialty
  Google Professional Data Engineer
  Databricks Certified Data Engineer

Job Description of Assistant Project and Network Engineer

* Regularly reviewing, monitoring, documenting, performing and remediating tasks (completed and ongoing) to ensure compliance with standards and ensure customer SLA are met.

* Configuring, hardening, setting up, managing, documenting, deploying and maintaining on-premise and virtual machine operating systems.

* Configuring, hardening, setting up, managing, documenting, deploying and maintaining cloud services, desktop softwares, wired/wireless/mobile 4G/5G/6G networks, IT/OT and IT Security infrastructures.

* Configuring, setting up, managing, documenting, deploying firewalls with security policies to automate and manage threat detection and vulnerabilities.

* Performing and managing asset management, change management, resolution management including incident logging, classification for diagnosis and recovery, reporting for case and vulnerability management.

* Tracking deadlines, coordinating meetings, producing meeting minutes, updating project plans, drawing network diagrams and providing progress reports to support project execution and management.

* Managing tender submission timelines, creating and maintaining content libraries, supporting the end-to-end tender process, coordinating inputs from sales, technical, and legal teams to produce compliant, high-quality, and winning proposals.

* Labeling cables, splicing and/or crimping cables, testing cable integrity, cleaning, installing and routing cables through conduits, walls, ceilings, or underground pathways.

Skills/ Certification Requirements

* Minimum CCNP (Enterprise and Collaboration) certification
* Conversant in

** understanding and hands-on in Link Aggregation, LAG, LACP and VLAN
** use of GNS3, Packet Tracer, wireshark and tcpdump for network analysis/simulation
** use of Pareto and Ai tools to articulate analysis

* At least 3 years of experience providing network operational and administration supporting Meraki and Cisco products (Routers / Switches/WLAN)

* Diploma from a Singapore institution

* Minimum GCE O or N level English at C6

* Ad-hoc travel to service customers in Asia

* Able to work during customers' non production hours as needed (12 midnight to 6am)

* Able to use MS Office proficiently

Please email CV to edralyn@matchresources.co and respond through mycareersfuture portal

We are representing our client, a leading service provider offering end-to-end integrated infocommunications IT solutions services, to look for an experienced Software Engineer to complement the existing group of technical experts. the Software Engineer is responsible for all technical requirements during project implementation. This involves scheduling, planning, forecasting, resourcing and management to ensure project accuracy and quality from conception to completion.

Responsibilities:

• • Research, design, implement and managing software programs
  • Develop application for contact centres.
  • Identify areas for modification in existing programs and subsequently developing these modifications
  • Write and implement efficient code
  • Determine operational practicality
  • Install and Maintain Information and Communications Technology (ICT) Solutions in networking and contact center settings
  • Maintain and upgrade existing systems
  • Training users
  • Support network Infrastructure, daily system operation check, schedule backup and preventive maintenance.
  • Coordinate job requests and update the project manager on all related project matters.
  • Ensure all the required project documentation is performed accordingly.
  • Assist in case escalation to product principal while ensuring minimal disruption to operations and maintaining high quality standards.

Requirements:

• Minimum Diploma in IT or Professional Certification in related field.
• Fresh graduates in related field will be considered for this role as training will be provided.
• Possess knowledge of the programming languages such as C#, Java, JavaScript, jQuery, Microsoft SQL and Dot NET.
• Familiar with Web Applications: Angular, HTML, CSS, MVC and REST APIs.
• Experience in SDLC Project Delivery, Spring & Agile Methodology.
• Understanding in IT infrastructure, networking setup and Contact Center environment will be added advantage.
• Possess effective communication skills.
• Ability to manage project stakeholders.

Key Responsibilities

• Design, develop, and maintain data pipelines, ETL/ELT processes, and data integration workflows.
• Architect and optimize data lakes, data warehouses, and streaming platforms.
• Work with structured, semi-structured, and unstructured data at scale.
• Implement real-time and batch data processing solutions.
• Collaborate with Data Scientists, Analysts, and Business stakeholders to deliver high-quality data solutions.
• Ensure data security, lineage, governance, and compliance across platforms.
• Optimize queries, data models, and storage for performance and cost efficiency.
• Automate processes and adopt DevOps/DataOps practices for CI/CD in data engineering.
• Troubleshoot complex data-related issues and resolve production incidents.
• Mentor junior engineers and contribute to technical strategy and best practices.

Technical Skills (Must-Have Tough Requirements)

Programming & Scripting

• Proficiency in Python, Scala, or Java for data engineering.
• Strong SQL skills (query optimization, tuning, advanced joins, window functions).

Big Data & Distributed Systems

• Expertise with Apache Spark, Hadoop, Hive, HBase, Flink, Kafka.
• Hands-on with streaming frameworks (Kafka Streams, Spark Streaming, Flink).

Cloud & Data Platforms

• Deep knowledge of AWS (Redshift, Glue, EMR, Athena, S3, Kinesis),
  or Azure (Synapse, Data Factory, Databricks, ADLS),
  or GCP (BigQuery, Dataflow, Pub/Sub, Dataproc).
• Experience with Snowflake, Databricks, or Teradata.

ETL/ELT & Orchestration

• Strong experience with Airflow, Luigi, Azkaban, Prefect.
• ETL tools like Informatica, Talend, SSIS.

Data Modeling & Storage

• Experience with Data Lakes, Data Warehouses, and Lakehouse architectures.
• Knowledge of Star Schema, Snowflake Schema, Normalization/Denormalization.

DevOps & Automation

• Proficiency in CI/CD (Jenkins, GitLab, Azure DevOps) for data pipelines.
• Experience with Docker, Kubernetes, Terraform, Ansible for infrastructure automation.

Other Tough Skills

• Strong knowledge of Data Governance, MDM, Data Quality, Metadata Management.
• Familiarity with Graph Databases (Neo4j), Time-Series Databases (InfluxDB, TimescaleDB).
• Understanding of machine learning data pipelines (feature engineering, model serving).

Qualifications

• Bachelor’s/Master’s degree in Computer Science, Data Engineering, or related field.
• 7–10 years of experience in data engineering or big data development.
• At least 2–3 large-scale end-to-end data platform implementations.
• Preferred Certifications:
  AWS Certified Data Analytics – Specialty
  Google Professional Data Engineer
  Databricks Certified Data Engineer

· Minimum 5-8 years of experience in data engineering or related roles

· Familiar with GIS platforms: ArcGIS Server, PostGIS

·        Able to use spatial Python libraries: GeoPandas, Shapely

· Build scalable geospatial data pipelines for ingestion, transformation, storage, and quality checks from multiple government sources.

·        Implements data cataloging, metadata, lineage, and security; optimizes storage and performance for GIS analytics (e.g., PostGIS, data lakes).

·        Provides reliable data services and contracts to support downstream GIS analytics and front-end visualizations, collaborating closely with GIS and front-end teams.

·        Datamanagement: applies validation, cleansing, reprojection, metadata, and datalineage of geospatial data

• Well Established Company
• Basic $3300 - $3700 + Incentive + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas
• Working days: Monday to Friday (8am to 5pm), Saturday (8am to 12pm)

Job Responsibilities:

• Finding and securing new customers
• Attend to client enquiry, site visit, understand, communicate product value, provide solution, negotiating and close deal
• Track customer interactions and sales data, coordinate efforts with marketing and stay informed about market trends to drive revenue and achieve company growth
• Other ad-hoc duties as assigned

Job Requirements:

• Possess minimum Nitec/Diploma qualification with minimum 1-2 years of relevant experience
• Possess with electrical and crane/hoist basic knowledge will be added advantage
• Preferable possess Singapore driving license

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Scope of work:

• To perform the Mechanical and Electrical Assembly, Laser Optics Alignment, Calibration and Final Testing on Capital Equipment in according to Technical Instructions.
• To work with vendor to perform the preparation of Capital Equipment for shipment.
• To complete the Capital Equipment, build with the takt time.
• To monitor and expedite materials delivery to ensure production schedule are met.
• To own and be responsible for the entire process of Capital Equipment build, adhering to Company Quality and Safety Requirements
• To conduct Preventive Maintenance on equipment promptly.
• To monitor calibration schedule for tools and ensure they are calibrated timely in according to schedule.
• Expected to be trained and work on 2 or more Capital Equipment

Requirements

• Higher NITEC/Diploma in Mechanical/Electrical/Mechatronics Engineering
• Technically competent and like hands-on
• Take pride in building and outputting quality Capital Equipment.
• Able to work independently after qualification.
• Able to communicate and work comfortably with all levels and to raise work issues to Production Management
• Willing to take on more tasks and the hunger for new knowledge.
• Quality and Safety mindset and meticulous in your work.
• Able to use or operate basic testing / troubleshooting tools i.e. Digital Multimeter, Oscilloscope etc.
• Able to work OT on weekday and weekends.
• Able to work night/rotating shift if required.
• Prior experience in similar field will be an added advantage

Scope of work:

• To perform the Mechanical and Electrical Assembly, Laser Optics Alignment, Calibration and Final Testing on Capital Equipment in according to Technical Instructions.
• To work with vendor to perform the preparation of Capital Equipment for shipment.
• To complete the Capital Equipment, build with the takt time.
• To monitor and expedite materials delivery to ensure production schedule are met.
• To own and be responsible for the entire process of Capital Equipment build, adhering to Company Quality and Safety Requirements
• To conduct Preventive Maintenance on equipment promptly.
• To monitor calibration schedule for tools and ensure they are calibrated timely in according to schedule.
• Expected to be trained and work on 2 or more Capital Equipment

Requirements

• Higher NITEC/Diploma in Mechanical/Electrical/Mechatronics Engineering
• Technically competent and like hands-on
• Take pride in building and outputting quality Capital Equipment.
• Able to work independently after qualification.
• Able to communicate and work comfortably with all levels and to raise work issues to Production Management
• Willing to take on more tasks and the hunger for new knowledge.
• Quality and Safety mindset and meticulous in your work.
• Able to use or operate basic testing / troubleshooting tools i.e. Digital Multimeter, Oscilloscope etc.
• Able to work OT on weekday and weekends.
• Able to work night/rotating shift if required.
• Prior experience in similar field will be an added advantage

Key Responsibilities:

·       Lead the technical planning and delivery of IT infrastructure projects including system upgrades, migrations, new deployments and vendor coordination.

·       Drive continuous improvement of IT infrastructure across servers, networks and cloud platforms to enhance reliability, performance, security and scalability.

·       Serve as the escalation point for complex IT infrastructure issues, and provide hands-on technical guidance and mentoring to Systems Engineers.

·       Partner with departments and ministries to deliver the IT infrastructure needed for high-demand and large-scale church initiatives and events.

·       Support colleagues with day-to-day IT requests and work closely with vendors to ensure routine maintenance, deployments and system upkeep are carried out well.

Skills/Qualifications

o  Experience in Windows Server OS, virtualisation platforms (e.g., Nutanix), and cloud environments (Microsoft Azure, Microsoft 365 or AWS), including infrastructure and cloud platform architecture design.

o  Strong knowledge of networking fundamentals including routing, switching, VLANs, firewalls and VPN — familiarity with cloud-managed networking platforms like Cisco Meraki and web security tools like Cloudflare.

o  Experience in infrastructure security including OS and network hardening, patch management, vulnerability remediation and endpoint protection like CrowdStrike.

o  Experience implementing backup, disaster recovery and cloud storage solutions, including recovery planning, testing anddocumentation.

o  Core IT infrastructure services including Active Directory, DNS, DHCP, enterprise email platforms, and storage technologies suchas SAN and NAS.

o   Strong analytical and troubleshooting skills, good communication with both technical and non-technical colleagues, and a collaborative, service-oriented approach to work.

Our client is a well-established MNC and a global leader in industrial automation and process control solutions. Due to their current expansion plan, they are looking for a PLC/DCS Field System Engineer, in hopes of strengthening their engineering team. They are located in the (West) - 2 ways company transport provided at Clementi MRT.

Responsibilities:

• Perform system setup, configuration, and programming for control systems (DCS/PLC) including associated hardware and software components.
• Execute system testing activities, including Factory Acceptance Test (FAT) and Site Acceptance Test (SAT).
• Support site installation, commissioning, and integration with third-party systems.
• Prepare, update, and maintain engineering documentation and technical records.
• Provide on-site maintenance support, including troubleshooting, preventive servicing, and system optimization.
• Monitor system performance and recommend corrective actions or upgrades where required.
• Manage and coordinate software license renewals and version updates.
• Generate service and maintenance reports, including customized reports when necessary.
• Assist in preparing technical proposals, cost estimations, and support pre-sales or after-sales activities.
• Ensure compliance with safety, operational, and technical standards during project execution and service activities.

Requirements:

• Diploma or Degree in Engineering (Electrical, Electronics, Mechanical, Chemical, Control) or Computer Science / Information Systems.
• Experience in control systems, automation, or process control environments.
• Knowledge of PLC or DCS systems, including configuration and troubleshooting.
• Familiarity with system integration, testing, and commissioning processes.
• Ability to interpret technical drawings, system architecture, and engineering documentation.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/CV.

We regret that only shortlisted candidates will be notified.
Email Address: jobs@recruitpedia.sg
EA License No: 19C9682
EA Personnel No: R22104769
EA Personnel Name: Ong Boon Kiet (Travys)