Total 6,663 process engineer job vacancies in Engineering category in Hong Kong

1. 對數控磨床進行機器設定、調整和刀具佈置。
2. 閱讀並瞭解機械加工圖、幾何尺寸和公差要求。
3. 選擇正確的砂輪、轉速、進給量、夾具和夾緊方式。
4. 對砂輪進行偏移調整、修整和平衡。
5. 操作機器，依照品質/尺寸目標生產零件。
6. 使用千分尺、遊標卡尺、高度規、輪廓投影機、三坐標測量機（如需要）進行製程測量。
7. 確保零件品質符合圖面規格和客戶要求。
8. 保持機器區域周圍良好的5S管理。
9. 立即向上級報告任何異常情況、機器故障或品質偏差。
10. 始終遵守安全規則、個人防護裝備使用規定和公司標準作業規程。
11. 進行 ISO9001、ISO 14001 和 IATF16949 活動。
12. 管理層要求的其他任何事項。

福利待遇

• 增額和獎金
• 津貼（餐費、培訓費等）
• 醫療保險
• 小組診所
• 個人發展機會
• 帶薪培訓和發展/教育培訓計劃
• 公司年度晚宴暨幸運抽獎
• 節日紅包

JOB SCOPE & JOB RESPONSIBILITIES

• Familiar with RO, demin, mixed bed, ultra-pure, neutralization, chemical preciptation (including HF, heavy metal, backgrind etc.), biological treatment etc. and specialty processes.
• Develop process design packages: heat & mass balances; PFDs; P&IDs; process calculations.
• Perform equipment sizing and prepare specification (pumps, blowers, air compressors, vessels, tanks) and materials selection; define instrumentation and control philosophy with cause-and-effect matrices.
• Liaise with OEMs/vendors to validate technologies and recommend best-fit solutions based on performance, compliance, schedule, and total cost of ownership (CAPEX+OPEX); drive technical clarifications and value engineering.
• Prepare and review equipment lists, line lists, valve list and load lists as required.
• Prepare and check process datasheets for RFQs; evaluate vendor proposals for compliance with technical specs, codes, and regulations; lead technical clarifications.
• Prepare technical proposal according to client's RFQs. Provide solution to clarifications and prepare cost estimation.
• Plan and participate in HAZOP and related reviews, coordinate action close-out.
• Produce/peer-review submission documentation; support project FAT/SAT, plant start-up, performance testing, process optimization, and handover.
• Compile/author ITP/IP and IOM manuals; interface with multidisciplinary teams (C&S, MEICA, controls) and construction/site teams.

JOB REQUIREMENTS

• Degree in Chemical or Environmental Engineering (or equivalent)
• Standards & codes: Familiar with relevant international standards/codes and onshore/offshore practices
• Proficiency with MS Office
• Working knowledge of AFT Fathom (hydraulic analysis) and AutoCAD Plant 3D (P&ID) is an advantage

WORK EXPERIENCES

• Process Engineer: More than 2 years in a similar scope, preferably in Oil & Gas, Power, or Water/Wastewater
• Senior Process Engineer: More than 5 years with demonstrated leadership in design reviews, HAZOP facilitation/close-out, vendor management and mentoring junior engineers.

Job Description:

• Collaborate with engineering teams to develop, review, and optimize sub-assembly and final system integration processes.
• Perform sub-assembly builds and final system integration in accordance with approved work instructions and engineering documentation.
• Prepare and stage materials, components, and assemblies required for manufacturing builds.
• Ensure the availability and readiness of tools, fixtures, and equipment required for assembly and integration tasks.
• Execute assembly operations in strict compliance with Work Instructions (WI), Operational Method Sheets (OMS), and safety standards.
• Develop, maintain, and update manufacturing documentation, including work instructions and process procedures.
• Participate in process reviews, yield improvement initiatives, and continuous improvement projects to enhance product quality, productivity, and safety.
• Troubleshoot and resolve manufacturing and assembly issues, performing root cause analysis and implementing corrective actions where necessary.
• Maintain and update process monitoring checklists, including calibration status of tools and condition monitoring of fixtures and equipment.
• Provide operational support across multiple assembly lines, products, or system variants when required.
• Any other ad-hoc duties or assignments as assigned by the direct supervisor.

Job Requirements:

• Diploma or Degree in Electrical & Electronics Engineering, Mechanical Engineering, or related engineering discipline.
• Strong understanding of manufacturing processes, engineering documentation, and controlled procedures.
• Ability to interpret technical drawings, electrical schematics, assembly diagrams, and work instructions.
• Hands-on experience in precision assembly, system integration, or semiconductor equipment manufacturing is preferred.
• Experience with troubleshooting, failure analysis, and root cause investigation in a manufacturing environment.
• Strong problem-solving skills and ability to work independently as well as within cross-functional teams.
• Proficiency in Microsoft Office applications (Excel, Word, PowerPoint).
• Experience in Electrical & Electronics (E&E) manufacturing or semiconductor equipment industry is advantageous.
• Flexible to support multiple product lines or manufacturing activities as business needs require.
• Eligible and willing to travel to the United States for training assignments.
• Immediate availability preferred.
• Singapore Citizen or Permanent Resident preferred; candidates with a valid US visa will have an advantage.

Air Liquide Singapore

Headquartered in Paris, France, Air Liquide Singapore Private Limited (ALSg) is the largest and leading industrial gas company in South-east Asia. ALSg employs 800 people recognized for their high level of expertise to provide gases, equipment, services and packaged solutions to support the requirements of the Singapore manufacturing industry. With assets of more than S$1 billion, ALSg operates the largest network of air separation plants and gas production facilities dedicated to serving the different industries in Singapore. Strategically located on more than 20 sites in Singapore, our complete range of gases, which are produced under stringent quality control, are used in a wide variety of applications.

About Business Line

https://sg.airliquide.com/

Work Location 

Woodlands 

How Will You Be Contributing to Our Success?

The Process Engineer ensures safe, reliable Total Gas Management and uninterrupted ultra-high purity carrier gas supply to our semiconductor fabrication customers based in Woodlands. This role supports plant operations, resolves operational issues, maintains plant availability, and implements the Air Liquide Industrial Management System (IMS) while upholding strict safety and quality standards.

• Ensure smooth, safe, and reliable daily operations, conducting regular safety, housekeeping, and standard compliance audits.

• Coordinate and report monthly site maintenance schedules to the Site Facility Manager, ensuring strict compliance with division procedures.

• Evaluate maintenance delay justifications, audit vendor/Reliability Centre work quality quarterly, and ensure work orders close within three months.

• Conduct Root Cause Analysis (RCA) for all site incidents, implementing and tracking corrective and preventive actions (CAPA) cross-site.

• Manage Management of Change (MOC) approvals for non-routine modifications and review Safe Work Permits, Method Statements, and Risk Assessments.

• Maintain CQC equipment uptime, review Critical Safety Valves (BSV) with corresponding SOPs, and execute quarterly Out-of-Control Action Plans (OCAP).

• Issue and follow up on Corrective Action Reports (CAR) for internal departments and external vendors to ensure satisfactory closure.

• Ensure all site personnel are trained, qualified, and fully aware of their authorized tasks per Global Technology and Division procedures.

• Manage site expenditures within the allocated OPEX budget and proactively identify, highlight, and justify CAPEX requirements for improvements.

• Optimize supply reliability, plant availability, and IMS compliance while leading daily handovers, team building, and performance audits.

Are you a MATCH?

• Bachelor’s degree in Chemical Engineering, Process Engineering, or a related technical discipline.

• Minimum of 1 year of experience in the chemical industry; experience with Cryogenic Air Separation Units (ASU) or Steam Methane Reformer (SMR) operations is an advantage. 

• Good understanding of process safety risk management tools such as HAZOP and FMEA; experience with Lean Manufacturing or Six Sigma tools is preferred.

• Proven analytical and problem-solving skills, with a proactive approach to optimizing continuous production processes and operating effectively in an industrial plant environment.

• Ability to work with a team of operations technicians, coordinate cross-functional activities, and deliver results under tight deadlines.

• Highly organized, detail-oriented, a strong team player, and possesses excellent interpersonal and communication skills.

• Fresh graduates are welcome to apply. 

Why Join Us?

Air Liquide strives to offer its employees a total rewards package that contributes to a positive work environment and supports the well-being of all our employees and team members. We are driven by our Environmental Social Governance objectives and regularly review our benefits to ensure that we’re offering you a competitive package. At Air Liquide, we listen to our employees’ expectations. We create an engaging environment, diverse and inclusive, that allows employees to grow and to thrive.

We offer a comprehensive and competitive remuneration and benefits package including:

• Base salary

• Annual bonus

• Allowances

• Life insurance/Healthcare

• Paid maternity/paternity leave

• Childcare benefits

• Flexi/Wellness benefits

• Learning opportunities

• Mobility opportunities

• Volunteering opportunities

Our Differences make our Performance

At Air Liquide, we are committed to build a diverse and inclusive workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultures across the world.

We welcome and consider applications from all qualified applicants, regardless of their background. We strongly believe a diverse organization opens up opportunities for people to express their talent, both individually and collectively and it helps foster our ability to innovate by living our fundamentals, acting for our success and creating an engaging environment in a changing world.

We thank you for your interest in Air Liquide. Interested applicants are encouraged to send in a detailed resume, including reasons for leaving for past employment. Please be informed that only shortlisted candidates would be notified.

Responsibilities

• Provide technical leadership and manufacturing processes, ensuring stable, high-yield production
• Lead process optimization and scale-up for resin systems, impregnation, drying, lamination, and curing processes
• Drive process qualification and validation for new materials, formulations, equipment, and process changes
• Perform advanced troubleshooting and root cause analysis to resolve yield, delamination, voids, and surface quality issues
• Establish and improve process control strategies (SPC, Cp/Cpk) for critical parameters such as resin content, gel time, flow, and curing profiles
• Analyze production data to implement continuous improvement initiatives for yield, cycle time, and throughput
• Collaborate with R&D, Quality, and Production teams on formulation improvements, NPI, and technology transfer
• Lead engineering and productivity improvement projects, ensuring measurable gains in efficiency and cost
• Drive initiatives to reduce scrap, improve material utilization, and enhance on-time delivery(OTD)
• Develop and maintain process documentation (SOPs, work instructions, control plans) to ensureconsistency and compliance
• Ensure adherence to EHS, quality, and industry standards, particularly in handling resins, solvents, and high-temperature processes
• Mentor junior engineers and act as process owner/SME, supporting capability development and operational excellence
• Perform any other reasonable duties as required by Management from time to time

Requirement

• Bachelor’s Degree in Engineering (Chemical, Materials, Mechanical or related)
• Fresh graduates are welcome to apply
• Proven expertise in process control, yield improvement, and problem-solving methodologies (SPC, DOE, Six Sigma)
• Experience in NPI, scale-up, and cross-functional project leadership

Interested applicant, please do include the below in your resumes:

Reason for leaving your last and current employment
Last Drawn Salary and Expected Salary
Earliest Availability

Responsibilities of Process Engineer

· Process Technology development for Silicon wafer manufacturing

· Manage wafer manufacturing process in achieving quality, yield, quality and production targets.

· Collaborate with Technology counterparts globally on process alignment and qualification of new processes, suppliers and consumables if needed

· Work with cross-functional teams on process capability improvement and yield enhancement projects

· Coordinate troubleshooting of process issues and yield losses

· Drive for continuous process improvement and permanent solutions to resolve chronic process and quality issues.

· Develop best practices, routines and innovative solutions for continuous improvement

· Perform Statistical data analysis for process improvement and interpretation of data

· Apply problem solving methods (8D, Fishbone, DOE etc.) and risk analysis (like FMEA)

Requirements of Process Engineer

· University degree in Engineering or Science

· Min. 1 years relevant semicon/ manufacturing experience

· Knowledge of quality management systems, data analysis, Design of Experiments (DOE) and statistical process control (SPC)

· Proficient in statistical software like JMP, visual basic, database and queries will be an added advantage

· Self-motivated and able to work well in a team

· Good analytical and communication skills

· Willingness and curiosity to learn attitude

Brief Summary:

Join a dynamic team as a crucial link between engineering and manufacturing operations. In this role, you will oversee complex semiconductor processes, ensuring timely and quality delivery of technical specifications.

Responsibilities:

• Coordinate tasks between internal teams and external manufacturing partners to achieve timely project completion aligned with product release schedules.
• Address and resolve technical challenges by collaborating with internal engineers and external foundry personnel to deliver high-performance, manufacturable semiconductor processes.
• Assist in planning and conducting analyses to tackle process-related challenges.
• Ensure timely qualification phases and documentation for first-time-right manufacturing processes.
• Provide technical insights to guide process development, enhancing collaboration both within and outside the department.
• Conduct theoretical studies when necessary to optimize process performance for efficient development and ramp-up.
• Work closely with device engineering and foundry teams to facilitate successful process design and ensure reliability and modeling efficiency.
• Continuously refine engineering processes and standard work to improve deliverable quality and operational efficiency.
• Collaborate on qualification transitions, yield enhancement efforts, and high-volume production maintenance as needed.
• Define the roadmap for RF process technology in response to internal designs, market trends, and customer requirements.

Requirements:

• A minimum of 8 years of experience in the semiconductor industry, with at least 5 years in technical and/or project management.
• Bachelor's degree in a relevant field.
• Strong experience in semiconductor process engineering is highly preferred.
• Proficient in data analysis, with excellent problem-solving and communication skills.
• Familiarity with Cadence Layout tools.
• Extensive experience in improving process stability (CP/CPK) and yield (DFM/DFY) within RF processes.
• Demonstrated ability to lead technical processes effectively across product teams and engineering divisions.

EA License No.: 01C4394 (PERSOL SINGAPORE PTE LTD)

Registration No.: R23112488 (Julian Nerchan)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOL Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolsingapore.com/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

We are seeking an experienced Senior Process Engineer to join our client’s dynamic team.

Job Description (JD)| Senior Process Engineer

This role focuses on patient acquisition, conversion, and relationship management.

Role Summary:

This is a full-time, permanent role where the incumbent will play a crucial part in the design, implementation and optimization of our client’s industrial water treatment processes.

Responsibilities

• Lead the development of mass balances, hydraulic profiles (P&IDs) and process flow diagrams for water treatment plants.

• Conducting process modelling, simulations and pilot testing to validate new technologies and process improvements

• Size and specify process equipment, such as pumps, blowers, tanks and etc. to meet system performance and reliability requirements

• Evaluate supplier proposals, quotations to ensure compliance with technical and commercial requirements

• Collaborating with cross-functional teams to plan and execute projects

• Provide onsite technical support during project execution and lead troubleshooting of operational issues

• Lead plant testing and commissioning.

• Prepare commissioning plans, SOPs, O&M manuals and training materials.

• Support proposal development and tender preparation.

• Mentor junior engineers and designers.

• Execute other ad-hoc tasks assigned to support project and team objectives

Requirements

• Degree in Chemical Engineering, Environmental, Civil Engineering or a related technical discipline

• 8+ years' experience as a Process Engineer or Senior Process Engineer, preferably in the water treatment industry

• Proficient in AutoCAD

• Strong problem-solving, analytical and critical thinking skills

• Excellent interpersonal and communication skills

Com & Ben Packages

• Monthly Basic salary ranges from S$4k to S$7k

• Annual Leaves, Medical Leaves are as per Singapore’s statutory laws.

• Career development opportunity

• The HR Management team is very friendly and co-operative .

Please contact Recruitment Manager Leeza Shaheed (Registration ID: R1770675) at leeza@aethelra.com, info@aethelra.com, aethelraconsulting@gmail.com for further enquiries about the roles and mention the following information on your CV: Executive summary, Nationality, Language proficiencies, Total years of experience, relevant work-related experience- for how many years, availability, expected monthly basic salary, latest drawn monthly basic salary.

AethelRa Consulting Pte. Ltd. UEN: 202536338H | EA Licence No.25C3084

1 North Bridge Rd, #18-03, High Street Centre, Singapore 179094

Emails: leeza@aethelra.com| info@aethelra.com | aethelraconsulting@gmail.com

Website: https://aethelra.com

LinkedIn: https://www.linkedin.com/in/aethelra/

• Perform process setup and buyoff for both Drive Backend Assembly, ensuring that yield, cycle time, and quality outcomes meet defined targets
• Support product ID label buyoff to ensure compliance with product specifications and standards• Monitor production yield to detect any excursions, conduct process mapping, and implement immediate containment (stop bleeding)
• Establish hypotheses, design experiments to identify root causes, propose corrective actions, and report findings to engineers
• Escalate process and technical issues appropriately per PMP requirements
• Conduct basic data queries and analysis to provide relevant information and insights for engineering teams
• Ensure process sustainability by monitoring KPIVs/KPOVs and managing Fast Triggering systems to maintain stable and controlled operations
• Lead or participate in continuous improvement projects aimed at enhancing production efficiency in a consistent and sustainable manner
• Perform additional tasks and responsibilities as assigned to support team, department, and company Objectives and Key Results (OKRs)

Requirements:

• Diploma in Engineering and related disciplines
• Strong data querying and analytical capabilities
• Proficient in English with strong verbal and written communication skills
• Able to perform effectively under pressure and meet deadlines
• Demonstrates strong resilience, adaptability, and positive work attitude

To submit your application, please apply online to apply@rn-care.com or call +65 6514 9838 for a private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Interested applicants are invited to apply directly at the NUS Career Portal. Please note your application will only be processed if you apply via NUS Career Portal.

NUS Career Portal link: https://careers.nus.edu.sg/job/Semiconductor-Process-Engineer/33160-en_GB/

We regret that only shortlisted candidates will be notified.

We are seeking an experienced Process Engineer for process innovation, continuous improvement, and advanced technology development initiatives. This role focuses on improving yield, performance, scalability, and cost efficiency across semiconductor fabrication processes.

The ideal candidate brings strong analytical capability, hands-on semiconductor process knowledge, and a passion for driving measurable improvements through data-driven methodologies, experimentation, and cross-functional collaboration.

Key Responsibilities

·       Develop, design and optimise process integration flow for Silicon based and lithium niobate based photonics devices

·       Design of Experiments (DOE) to optimise critical process parameters (throughput, yield, etc.).

·       Collaborate with device, integration, equipment, and reliability teams to enhance process capability.

·       Drive technology transfer from R&D to manufacturing with optimised process windows.

·       Prepare technical documentation, reports, and presentations for internal and external stakeholders.

Qualifications

·       Bachelor’s, Master’s or PhD in Electrical Engineering, Physics, Material Science or related field.

·       3+ years of semiconductor process engineering experience (R&D or manufacturing).

·       Strong understanding of semiconductor fabrication process flows (lithography, etch, deposition, implantation, CMP, etc.).

·       Demonstrated experience in process optimisation and yield improvement.

·       Hands-on experience with DOE, statistical modeling, and process capability analysis.

·       Proficiency with data analysis tools such as Python, origin or similar.

·       Experience leading cross-functional technical projects.

Please be informed that only shortlisted candidates will be informed.

• Perform process setup and buyoff for both Drive Backend Assembly, ensuring that yield, cycle time, and quality outcomes meet defined targets
• Support product ID label buyoff to ensure compliance with product specifications and standards• Monitor production yield to detect any excursions, conduct process mapping, and implement immediate containment (stop bleeding)
• Establish hypotheses, design experiments to identify root causes, propose corrective actions, and report findings to engineers
• Escalate process and technical issues appropriately per PMP requirements
• Conduct basic data queries and analysis to provide relevant information and insights for engineering teams
• Ensure process sustainability by monitoring KPIVs/KPOVs and managing Fast Triggering systems to maintain stable and controlled operations
• Lead or participate in continuous improvement projects aimed at enhancing production efficiency in a consistent and sustainable manner
• Perform additional tasks and responsibilities as assigned to support team, department, and company Objectives and Key Results (OKRs)

Requirements:

• Diploma in Engineering and related disciplines
• Strong data querying and analytical capabilities
• Proficient in English with strong verbal and written communication skills
• Able to perform effectively under pressure and meet deadlines
• Demonstrates strong resilience, adaptability, and positive work attitude

To submit your application, please apply online to apply@rn-care.com or call +65 6514 9838 for a private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

• Perform process setup and buyoff for both Drive Backend Assembly, ensuring that yield, cycle time, and quality outcomes meet defined targets
• Support product ID label buyoff to ensure compliance with product specifications and standards• Monitor production yield to detect any excursions, conduct process mapping, and implement immediate containment (stop bleeding)
• Establish hypotheses, design experiments to identify root causes, propose corrective actions, and report findings to engineers
• Escalate process and technical issues appropriately per PMP requirements
• Conduct basic data queries and analysis to provide relevant information and insights for engineering teams
• Ensure process sustainability by monitoring KPIVs/KPOVs and managing Fast Triggering systems to maintain stable and controlled operations
• Lead or participate in continuous improvement projects aimed at enhancing production efficiency in a consistent and sustainable manner
• Perform additional tasks and responsibilities as assigned to support team, department, and company Objectives and Key Results (OKRs)

Requirements:

• Diploma in Engineering and related disciplines
• Strong data querying and analytical capabilities
• Proficient in English with strong verbal and written communication skills
• Able to perform effectively under pressure and meet deadlines
• Demonstrates strong resilience, adaptability, and positive work attitude

To submit your application, please apply online to apply@rn-care.com or call +65 6514 9838 for a private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

• Perform process setup and buyoff for both Drive Backend Assembly, ensuring that yield, cycle time, and quality outcomes meet defined targets
• Support product ID label buyoff to ensure compliance with product specifications and standards• Monitor production yield to detect any excursions, conduct process mapping, and implement immediate containment (stop bleeding)
• Establish hypotheses, design experiments to identify root causes, propose corrective actions, and report findings to engineers
• Escalate process and technical issues appropriately per PMP requirements
• Conduct basic data queries and analysis to provide relevant information and insights for engineering teams
• Ensure process sustainability by monitoring KPIVs/KPOVs and managing Fast Triggering systems to maintain stable and controlled operations
• Lead or participate in continuous improvement projects aimed at enhancing production efficiency in a consistent and sustainable manner
• Perform additional tasks and responsibilities as assigned to support team, department, and company Objectives and Key Results (OKRs)

Requirements:

• Diploma in Engineering and related disciplines
• Strong data querying and analytical capabilities
• Proficient in English with strong verbal and written communication skills
• Able to perform effectively under pressure and meet deadlines
• Demonstrates strong resilience, adaptability, and positive work attitude

To submit your application, please apply online to apply@rn-care.com or call +65 6514 9838 for a private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

• West
• EPC Firm
• 5 Days work week
• Prior Exposure to Biopharma projects is advantageous

As a global Organization in design, engineering, procurement, and construction in controlled and regulated environments, our client offers a complete range of services from consulting to the managing of turnkey solutions – delivered to the highest quality and safety standards

About the role;

Reporting to the Lead Process Engineer, you will take responsibility within our project team for the handling of all process challenges from the design phase till the completion and handover to the client.

Job Description

• Lead process systems from conceptual design through detailed design, construction, commissioning, and final handover.
• Develop and progress key design deliverables, including PFDs, P&IDs, specifications, datasheets, and functional descriptions in line with project requirements.
• Perform engineering calculations such as equipment sizing, pressure loss, and heat & mass balances, including capacity assessments based on client URS.
• Participate in and support design reviews with clients and internal stakeholders, ensuring alignment with technical and commercial requirements.
• Prepare tender specifications, evaluate bids, and support subcontractor selection and appointment processes.
• Review and approve technical submittals, subcontractor designs, and ensure all interfaces and system integrations meet specifications.
• Oversee installation, testing, and commissioning activities, including defining acceptance criteria, managing site testing, and closing punch lists.
• Monitor construction progress, quality, and subcontractor performance, including review of variations, claims, and installation standards.
• Ensure proper documentation throughout the project lifecycle, including test packs, as-built drawings, and handover manuals.
• Act as Work Package Owner (WPO), managing assigned packages end-to-end while promoting safe work practices, professionalism, and alignment with company objectives.

Job Requirement

• Master´s or Bachelor's degree in Civil, Industrial, Chemical, Mechanical or Bio-Engineering, with a specialization in biotech process and/or Clean Utilities engineering
• 2-4 years of work experience as a process engineer in the mission critical facility industry
• First experience in construction and commissioning / qualification is an asset
• Knowledge in line sizing simulation tools, engineering codes or construction experience is considered an asset
• You are committed, flexible, creative, assertive, communicative, motivated and well-organized
• You like working in a team but you can also function in an independent and safe way, you will be able to solve technical issues

OTHER INFORMATION:

• Location : West
• Working days : 5 days work week
• Salary : $6,000 and Bons

The Company strives to achieve employee satisfaction and provides conducive working environment to all staff.

HOW TO APPLY:

If you are a team player, meticulous & organized, and more importantly, believe that YOU CAN MAKE A DIFFERENCE, we would like to hear from you.

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: R1875905) (BEP) by clicking the ‘Apply link’ /
or call your friendly Consultant, David, at 6590 9958 for a confidential discussion.

Please indicate the below information in your resume:

• Current & Expected salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at

www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Key Tasks and Responsibilities:

• Technical Guidance – Provide expert advice and technical support to the wider BWO organisation on Process Safety / Technical Safety activities in Asset Operations, Projects and Concept Development.
• Verification Activities – Ensure Asset Operations and Projects compliance with Technical Standards, Design Performance Standards and Operational Performance Standards. Support the internal verification process, performing process safety verification activities in coordination with the Verification / Continuous Improvement department.
• Monitor and report Key Performance Indicators (KPIs) related to Process Safety. Conduct regular performance analysis to uncover weak signals and proactively identify areas of improvement.
• Support development and maintenance of BWO’s Technical Standards – These define the minimum requirements for Asset Operations and Projects within own discipline.
• Support Level 3 Incident Assessments, where required.
• Continually seek improvements in personal areas of responsibility.

Qualifications:

• A minimum of 10+ years’ experience in the offshore Oil & Gas industry, or closely related industry.
• Technical Safety experience in Projects is required, preferably within the FPSO industry.
• Operational expertise from both project and operations phases of offshore facilities, including experience in audit and verification activities is preferred.

Skills:

• Team player with the ability to lead.
• Proactive and able to work independently, applying a structured and systematic approach.
• Strong communication skills and the ability to ask relevant questions and provide thorough explanations.
• Ability to deliver high quality work on time.
• Ability to work in a multidisciplinary / multinational environment.
• In-depth knowledge of Technical Safety design and Process Safety.
• Well-versed in relevant international Codes and Standards.
• Good awareness of safety management systems and best practices across the industry.