Total 5,191 firmware engineer job vacancies in Engineering category in Hong Kong

Job Description:

• In charge of designing the PCB layout of electronic circuit boards and generate Gerber files for PCB fabrication.
• Responsible in research and define efficient and reliable architecture to fulfil electronic circuit board requirements for the company drone systems.
• In charge of firmware programming in embedded C/C++ language.
• In charge of testing PCB assemblies thoroughly and ensure they operate as expected.
• Responsible in sourcing suitable electronic components to implement the design architecture.
• In charge of studying datasheets of the electronic components and design the schematic of electronic circuit boards that can fulfil the requirements.
• Responsible in generateing documents and drawings of design and test.

Job Requirement:

• Minimum Degree in Mechanical/ Electrical/ Aerospace/ Mechatronics Engineering or relevant
• Minimum 3 years of working experience in electronic hardware and firmware design
• Experience in analog and digital circuit design with experience in designing electronic circuits with microcontrollers, digital signal processors (DSP), field programmable gate arrays (FPGAs), etc
• Proficient in schematic and PCB design tools such as Altium Designer, OrCAD Capture and PCB Designer, Autodesk EAGLE, etc and using instruments such as multimeters, oscilloscopes, logic analysers, etc. to troubleshoot issues on electronic circuit boards.
• Proficient in C/C++ programming language.
• Knowledge in various communication buses and protocols such as UART, I2C, SPI, CAN, Ethernet, etc.

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In charge of ensuring the implementation of Lean/Continuous Improvement tools & Lean projects in the company
• Responsible for expanding and sustaining the lean deployment efforts through facilitating Value Stream Mapping (VSM), Kaizen and Continuous Improvement events
• In charge of identifying, deployment and driving successful completion of Lean projects/initiatives
• In charge of leading Continuous Improvement initiatives and managing the efficiently the sharing of best practices among departments

Job Requirement:

• Minimum Degree in Aersopace Engineering or relevant
• Minimum 5 years of working experience in driving continous improvement projects
• Experience in Lean Six Sigma Green/Black Belt, JIRA, Power BI, VBA and Macros will be advantage

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Job Description:

• In Charge of auditing and assessing the suitability of suppliers
• Responsible for initiating and managing project transfer
• Responsible for guiding and implementing improvement programs as well as negotiating and balancing capacity among suppliers
• Responsible for FA Inspection of casting and machining services
• In Charge of managing the foundries which include quality and delivery performance
• In charge of handling the non-conformance parts follow up
• Responsible for checking and monitoring suppliers to ensure delivery

Requirements:

• Min Diploma in Mechanical / Precision Engineering or relevant
• Min 5 years of experience in Metal Casting Process

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities:

·       Responsible for managing a team of M&ECoordinators and BIM Modellers in the design and coordination works

·       Attend project meetings and establish businessrelationship with the clients, consultants and contractors.

·       Coordinate closely with the project team members onconstruction activities, including site logistic, building management, and submissionsto relevant authorities.

·       Liaise with the M&E sub Contractors on co-ordinationand installation, testing and commissioning

·       Monitor site progress, ensure compliance withspecifications, and maintain quality standards

·       Support project documentation, including shop drawings,method statements, and as-built drawings

Requirements:

• Degree in Mechanical or Electrical Engineering (recognized by Singapore PE Board)
• Minimum 5 years of experience in construction industry
• Proficient in BIM and AutoCAD

Responsibilities:

• In charge of managing and supporting planning and procurement of medical, non-medical equipment, and furniture
• Plan and lead user workgroups by organising regular meeting sessions, setting goals and targets, facilitating useful and productive discussions, guiding user departments, as well as reviewing performance indicators and work plans
• Responsible for budgetary planning and control, ensuring that the development keeps within budget
• Work closely with user department and various stakeholders in the preparation of medical, non-medical equipment and furniture specifications for tenders
  Provide recommendation to users based on technical compliance of medical, non-medical equipment and furniture in tender submissions
• Attach to Group team to familiarise with Group BME policies and procedures through supporting the daily operations to align with organisation and regulatory requirements
• Liaise and manage external contractors on service and tender commitment issues Provide technical advisory to end users and senior management on medical, non-medical equipment and furniture related issues
• Perform any other duties as assigned

Requirements

• Min Degree in Electronics or relevant Engineering course
• Min 3 years of experience in service and maintenance of medical equipment.
• Experience in Healthcare/Hospitals

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

Responsibilities

• Oversee the organization’s IT infrastructure, ensuring optimal performance, security, and reliability of servers, network and security systems, as well as cloud services.
• Design, implement, and maintain the IT infrastructure of the organization.
• Maintain Windows servers, virtualization platforms, and storage solutions.
• Manage Active Directory, DNS, DHCP, and Group Policy.
• Ensure high availability and disaster recovery with backups and replication.
• Monitor system performance, troubleshoot issues, and apply patches and updates.
• Implement network design, configure, and maintain LAN, WLAN, and VPN infrastructure, managing firewalls, switches, and routers.
• Implement and monitor network security policies, intrusion detection, and access control.
• Optimize network performance, troubleshoot connectivity issues, and ensure redundancy.
• Implement cybersecurity best practices, monitor threats, and manage endpoint protection and vulnerability assessments.
• Ensure compliance with regulations.
• Conduct security audits and enforce policies on user access, encryption, and authentication.
• Create and maintain network documentation, including network diagrams, configurations, and procedures.
• Carry out any other tasks assigned by the management

Requirement

• Min Degree in Information Technology or relevant
• Min 5 years of experience in providing Network, System and Cybersecurity operational support.
• Experience with servers, network and security devices, firewall, switches, routers, load balancers and wireless solutions.
• Certifications in CCNA/ CCNP/ CCIE/ Microsoft certified Azure Solutions Architect and/or Windows Server Administrator, CISSP, CISM and CompTIA Security will be required

To submit your application, please apply online to apply@rn-care.com or call +(65) 6513 5697 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

• Perform process setup and buyoff for both Drive Backend Assembly, ensuring that yield, cycle time, and quality outcomes meet defined targets
• Support product ID label buyoff to ensure compliance with product specifications and standards• Monitor production yield to detect any excursions, conduct process mapping, and implement immediate containment (stop bleeding)
• Establish hypotheses, design experiments to identify root causes, propose corrective actions, and report findings to engineers
• Escalate process and technical issues appropriately per PMP requirements
• Conduct basic data queries and analysis to provide relevant information and insights for engineering teams
• Ensure process sustainability by monitoring KPIVs/KPOVs and managing Fast Triggering systems to maintain stable and controlled operations
• Lead or participate in continuous improvement projects aimed at enhancing production efficiency in a consistent and sustainable manner
• Perform additional tasks and responsibilities as assigned to support team, department, and company Objectives and Key Results (OKRs)

Requirements:

• Diploma in Engineering and related disciplines
• Strong data querying and analytical capabilities
• Proficient in English with strong verbal and written communication skills
• Able to perform effectively under pressure and meet deadlines
• Demonstrates strong resilience, adaptability, and positive work attitude

To submit your application, please apply online to apply@rn-care.com or call +65 6514 9838 for a private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd

EA License No: 17C8900

Job Description

• Responsible for integration and implementation of both hardware and software engineering work
• Carry out proper planning, execution and supervision of the integration work and do QA technical checks throughout the project execution
• Handle application programme change management, hardware deployment management and documentation
• Implementation of PLC/SCADA project from concept to design and programming
• Interface with SCADA and PLC programming
• Meeting with clients, doing reports and documentation
• Perform troubleshoot independently

Requirements

• Min Nitec in Mechatronics, Electrical or Electronics
• Possess a Singapore Class 3 or 3A Driving License
• knowledge in PLC and SCADA

To submit your application, please apply online apply@rn-care.com or call +(65) 6514 9838 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900

We are seeking a highly skilled Senior Process Integration Engineer to lead the development and optimization of Indium Phosphide (InP) based Edge Emitting Lasers (EELs). In this role, you will be the bridge between design and manufacturing, ensuring that our high-performance optoelectronic devices transition from concept to high-volume production with world-class reliability and yield.

You’ll be working at the frontier of photonics, handling complex material systems and sophisticated fabrication sequences to power the next generation of optical communications and sensing technologies.

Core Responsibilities

• Process Flow Ownership: Design, implement, and manage the full end-to-end fabrication flow for InP-based EELs (e.g., Fabry-Pérot, DFB, and DBR lasers).
• Yield & Performance Optimization: Identify and resolve integration bottlenecks. Use Statistical Process Control (SPC) and Design of Experiments (DOE) to improve device electro-optical performance (threshold current, wall-plug efficiency, and slope efficiency).
• Cross-Functional Collaboration: Partner with Epitaxy (MOCVD) teams to optimize regrowth interfaces and with the Design team to ensure Layout-to-Mask integrity.
• Advanced Fabrication Management: Oversee critical steps including dry/wet etching (ICP/RIE), dielectric deposition (PECVD/ALD), metallization etc.
• Failure Analysis: Coordinate Root Cause Analysis (RCA) on fabrication failures using SEM, TEM, and FIB diagnostics to drive continuous improvement.

Key Technical Requirements

• Materials Expertise: Deep understanding of III-V compound semiconductors, specifically the GaAs/InP/InGaAsP/material systems.
• Device Physics: Strong grasp of semiconductor laser physics
• Fabrication Proficiency: Hands-on experience or good understanding on photolithography, etching, thin film
• Characterization:  Understanding laser characterization data and correlating results back to specific process modules.

Qualifications

• Education: PhD or Master’s degree in Electrical Engineering, Physics, Materials Science, or a related field.
• Experience: 5+ years of direct experience in III-V semiconductor processing
• Software: Proficiency in JMP, or Python for data analysis;
• Mindset: A methodical troubleshooter who thrives in a cleanroom environment and enjoys the "detective work" of process integration.

Description

We are seeking an AI Engineer with strong hands-on experience in Microsoft Azure AI services to design, develop, and deploy AI-powered solutions. The role focuses on leveraging Azure-native AI capabilities, data services, and machine learning tools to build scalable and production-ready intelligent systems.

Key Responsibilities

Design and implement AI solutions using Azure AI services

Build and deploy machine learning / AI models on Azure cloud

Develop APIs and services to integrate AI capabilities into enterprise applications

Work with structured and unstructured data for model training and inference

Collaborate with business and technical teams to define AI requirements

Deploy, monitor, and optimize AI solutions in Azure environments

Ensure performance, scalability, and reliability of AI systems

Support troubleshooting and enhancement of existing AI solutions

Required Skills & Experience

Hands-on experience with Microsoft Azure AI / Azure Machine Learning

Strong understanding of AI/ML concepts and model lifecycle

Experience deploying and consuming models via APIs

Strong programming skills in Python / Java / similar languages

Experience working with data pipelines and data processing

Knowledge of REST API integration and system design

Good to Have

Experience with Azure services (App Service, Functions, AKS, Data Factory)

Familiarity with ML frameworks (Scikit-learn, TensorFlow, PyTorch)

Exposure to MLOps practices (CI/CD for ML models)

Experience with cloud monitoring and logging tools

Understanding of model evaluation and performance tuning

Soft Skills

Strong analytical and problem-solving skills

Good communication and collaboration abilities

Ability to work in Agile teams

Eagerness to learn and adapt to new cloud AI technologies

• Well Established Security Inspection Solutions Company

• Salary: $2500 - $2800 (Basic) + $300 Transport Allowance

• Working Hour: Monday - Friday (8.30am – 5.30pm)

• Company Location: Jurong East (Based on Project Site)

• Variable bonus + Excellent Wellfare

• Training Provided

Job Scope:

• Assist Engineers in the maintenance, repair, and installation of equipment. Diagnose errors and technical issues and determine appropriate solutions.
• Support Engineers in project management, including planning, execution, and monitoring.
• Assist with the installation of new equipment and systems.
• Conduct routine troubleshooting of mechanical and electrical equipment to ensure smooth operations.
• Produce timely and detailed reports regarding maintenance activities, project status, and any issues or delays.
• Follow all company field processes and protocols to ensure safety and efficiency.
• Perform basic housekeeping duties to ensure a clean and safe work environment.
• Perform any other engineering-related tasks as assigned by senior engineers or management.

Requirement:

• Diploma in Electrical / Mechanical Engineering or equivalent
• 0 - 2 years of relevant working experience in similar position

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

YEOW CHANG FU (R23118759)

EA Recruitment Pte Ltd

EA License No: 21C0492

Key Responsibilities

• Evaluate machinery and equipment specifications to ensure they meet technical requirements; interpret classification rules and respond to review comments.

• Familiar with equipment specifications and installation requirements for main engines, generators, propulsion systems, gearboxes, hydraulic equipment, HVAC, refrigeration, and related systems.

• Knowledgeable in marine piping systems including bilge, ballast, tank gauging, cooling, fuel oil, sanitary, fire protection, and others. Capable of selecting appropriate pump types, compressors, pipe materials, thicknesses, valves, and fittings that meet pressure ratings and functional needs.

• Coordinate with designers and vendors to develop pipe schematic diagrams, machinery space equipment layouts, and equipment installation plans.

• Review mechanical interfaces for major equipment such as main engines, gearboxes, and propeller shafting.

• Collaborate with a team of engineers to develop detailed 3D ship models for production, including interfacing and clash checks on pipe routing, HVAC, electrical installations, and other systems; generate material take-offs (MTO) for pipe routing, fittings, and pipe spools.

Requirements

• Bachelor's degree or Diploma in Marine Engineering.

• Minimum 5 years of relevant experience in a shipyard environment.

• Proficiency in AutoCAD.

• Good overall computer skills.

• Solid understanding of shipbuilding and project processes; ability to comprehend technical specifications and engage in project discussions with clients.

• Strong analytical, communication, and interpersonal skills.

• Willing to travel to Batam or other countries for technical meetings as required.

About STMicroelectronics

At ST, we are 48,000 creators and makers of semiconductor technologies mastering the semiconductor supply chain with state-of-the-art manufacturing facilities. An integrated device manufacturer, we work with more than 200,000 customers and thousands of partners to design and build products,solutions, and ecosystems that address their challenges and opportunities, and the need to support a more sustainable world. Our technologies enable smarter mobility, more efficient power and energy management, and the wide-scale deployment of cloud-connected autonomous things. We are on track to be carbon neutral in all direct and indirect emissions (scopes 1 and 2), product transportation, business travel, and employee commuting emissions (our scope 3focus), and to achieve our 100% renewable electricity sourcing goal by the end of 2027.

Further information can be found at www.st.com

YOUR ROLE 

1. Set-up process recipe of newly setup process equipment.
2. Perform qualification for new process equipment and new process recipe.
3. Evaluate the new processes and make a series of process characterization.
4. Perform inline troubleshooting and qualification in daily operation.
5. Follow Gemba activity to identify opportunity of improvement in operation and quality aspects.

YOUR SKILLS & EXPERIENCES

• Degree in engineering of materials, chemistry
• Knowledge of excel, office suite.
• English language proficiency
• at least 5 years experience in wafer fab process engineering, and having at least 3 years experience in DCVD process; preferred experienced in DCVD process tool type in Applied materials Centura and Producer.
• Strong CVD process technical knowledge background, with experience to develop and optimize new process recipe
• Master SPC, FMEA and 8D problem solving methodology.

Senior Civil & Structural Engineer

• HQ at Changi Business Park [ Expo MRT ]
• Work both in the office and at project sites
• Mon to Fri, from 8.30am to 5.15pm
• Salary is $5,000 - $6,500 + Variable Bonus [ No AWS ]

Job Requirements

1. Bachelor's Degree in Civil Engineering, Building Construction Management, or a related field.
2. Minimum of 5-7 years of experience in building construction, with substantial experience working for A1 Main Contractors
3. Experience managing large-scale commercial or industrial projects is a plus.

Key Responsibilities

• Lead the planning, execution, and management of construction projects from initial stages through to completion, ensuring alignment with project objectives.
• Collaborate closely with the Project Manager to develop detailed project schedules, track progress, and implement corrective actions to meet deadlines.
• Work with architects and engineers to review construction plans, ensuring designs are feasible and compliant with regulatory requirements.
• Conduct thorough feasibility studies and risk assessments to proactively identify potential challenges and provide innovative solutions as needed.
• Ensure adherence to quality standards and specifications through regular site inspections, monitoring construction activities, and addressing any non-compliance issues.
• Supervise day-to-day construction operations, ensuring on-time completion and adherence to budget constraints while maintaining exceptional quality and safety standards.
• Develop and enforce comprehensive site safety plans and protocols, working in tandem with safety personnel to foster a culture of safety within project teams.
• Monitor and analyse project expenditure, assisting in the preparation of budget forecasts to ensure financial objectives are met.
• Other duties as assigned by the HOD - Engineering or Project Management Team.

Cheong Yeat Long | R25145358

The Supreme HR Advisory Pte Ltd | EA 14C7279

Job Description

• Responsible for integration and implementation of both hardware and software engineering work
• Carry out proper planning, execution and supervision of the integration work and do QA technical checks throughout the project execution
• Handle application programme change management, hardware deployment management and documentation
• Implementation of PLC/SCADA project from concept to design and programming
• Interface with SCADA and PLC programming
• Meeting with clients, doing reports and documentation
• Perform troubleshoot independently

Requirements

• Min Nitec in Mechatronics, Electrical or Electronics
• Possess a Singapore Class 3 or 3A Driving License
• knowledge in PLC and SCADA

To submit your application, please apply online apply@rn-care.com or call +(65) 6514 9838 for private and confidential discussion.

Your interest will be treated with the strictest of confidence. We regret that only shortlisted candidates will be notified or contacted.

RN Care Pte. Ltd
EA License No: 17C8900